Re: [Emc-users] JA branch is merged into master?

many thks Seb, i have another pc with debian to play with, in this lucid particular pc i tested debian wheezy (original pae686 kernel), but got insane latency wich i wasnt able to cure. (for everyone reference was: mb asrock 775i65G intel P4 prcsor). thanks again regards rck 2016-04-29 20:19

Re: [Emc-users] JA branch is merged into master?

On 04/29/2016 05:02 PM, Ricardo Moscoloni wrote: > for some odd reason, the scratch version showing in my lucid install wont > list ja nor master past pre1.1196. > some has a pointer of what im doing wrong? You're not doing anything wrong. The master branch dropped support for Lucid in October

Re: [Emc-users] JA branch is merged into master?

On 29 April 2016 at 18:30, Andrew wrote: >> "All" that you need to do is make the rest of the LinuxCNC code >> actually call that function at some point in the homing process. >> >> Thanks for the hint! Can you elaborate a bit what this function does? Currently it seems to do

Re: [Emc-users] JA branch is merged into master?

I updates my machine to run with the latest JA13 branch. Debian Jessie, kernel: 3.4-9-rtai-686-pae It has dual X axis servos and a rotary axis. I've run a few programs and everything seems great so far. On Fri, Apr 29, 2016 at 1:07 PM, andy pugh wrote: > On 29 April 2016

Re: [Emc-users] JA branch is merged into master?

2016-04-29 20:07 GMT+03:00 andy pugh : > > The kinematics functions all contain a function called > "kinematicsHome(...)" > > "All" that you need to do is make the rest of the LinuxCNC code > actually call that function at some point in the homing process. > > Thanks for the

Re: [Emc-users] JA branch is merged into master?

no I use .profile file with bash script for launch JA I use mingetty for automatic login at startup. Regards Giorgio > To: emc-users@lists.sourceforge.net > From: dgarr...@panix.com > Date: Fri, 29 Apr 2016 14:33:56 + > Subject: Re: [Emc-users] JA branch is merged

Re: [Emc-users] JA branch is merged into master?

On 29 April 2016 at 16:59, Andrew wrote: > Now I just need to add gladevcp panel to adjust the platform position by > adding offsets to joints (I see no other way to adjust HOME_OFFSETS for > correct home position). The kinematics functions all contain a function called

Re: [Emc-users] JA branch is merged into master?

To Giorgio, scara vismach representation works fine for you?, in JA? in the latest master (debian wheezy), vismach behavior was awkward. regards rck 2016-04-29 13:46 GMT-03:00 Ricardo Moscoloni : > Dewey G, a big thanks. > the buildbot scratch procedure was a new

Re: [Emc-users] JA branch is merged into master?

Dewey G, a big thanks. the buildbot scratch procedure was a new discovery for me (i was using git), wondering where the master version number resides, what version number is the latest (my lucid gets stuck in master 12xx or so wondering why!), thanks. TRT is impressive. Regards RCK 2016-04-29

Re: [Emc-users] JA branch is merged into master? (fix links)

Links Fixed: Important updating notes are maintained in the LinuxCNC getting-started guide in the updating-LinuxCNC section. The link to html docs for scratch branches like joints_axesNN changes after every new set of commits. The scratch build docs can be found at:

Re: [Emc-users] JA branch is merged into master? JA?

Enhanced Machine Controller (EMC)" <emc-users@lists.sourceforge.net> > Sent: Friday, April 29, 2016 11:35:13 AM > Subject: Re: [Emc-users] JA branch is merged into master? > > Glad to see your answers, theres so much interest in 5 axis and non > cartesian kins, and heres is

Re: [Emc-users] JA branch is merged into master?

> theres so much interest in 5 axis and non cartesian kins, > and heres is my proposal: force us to take a tour outside > our comfort zone!, can it be merged in a new config category > with an EXPERIMENTAL label? more people we have involved, > the better. No forcing, because there is

Re: [Emc-users] JA branch is merged into master?

. - Original Message - From: "Ricardo Moscoloni" <rmoscol...@gmail.com> To: "Enhanced Machine Controller (EMC)" <emc-users@lists.sourceforge.net> Sent: Friday, April 29, 2016 11:35:13 AM Subject: Re: [Emc-users] JA branch is merged into master? Glad to see your answe

Re: [Emc-users] JA branch is merged into master?

I've just updated my old hexapod to joints_axes13 and it's great so far! Thanks a lot! Incremental jogging works. Switching to world mode works even after I move a joint in joint mode. Auto-switch to world mode is very useful too. Now I just need to add gladevcp panel to adjust the platform

Re: [Emc-users] JA branch is merged into master?

Glad to see your answers, theres so much interest in 5 axis and non cartesian kins, and heres is my proposal: force us to take a tour outside our comfort zone!, can it be merged in a new config category with an EXPERIMENTAL label? more people we have involved, the better. Of my particular interest

Re: [Emc-users] JA branch is merged into master?

> if You try to use linuxcncrsh after a shutdown command my user > is unable to reconnet to the machine that itbring shutd > own command . for solve these problem I shutdown the PC > of machine (whit ssh) and make an wol command to power on again > the machine This is probably not a

Re: [Emc-users] JA branch is merged into master?

the PC of machine (whit ssh) and make an wol command to power on again the machine Regards Giorgio > To: emc-users@lists.sourceforge.net > From: j...@gnipsel.com > Date: Thu, 28 Apr 2016 18:32:08 -0500 > Subject: Re: [Emc-users] JA branch is merged into master? > > As quick a

Re: [Emc-users] JA branch is merged into master?

As quick as I can finger out why I can't build a rt-preemt kernel I'll be testing it... I've followed my instructions to the letter 27 times... I want to test it with my tiny little gantry in the making. JT On 4/28/2016 5:44 PM, Sebastian Kuzminsky wrote: > On 04/28/2016 04:32 PM, Ricardo

Re: [Emc-users] JA branch is merged into master?

On 04/28/2016 04:32 PM, Ricardo Moscoloni wrote: > hi folks > To someone how knows it, JA(13) is in master? > Regards > Rck Not yet, but we'd love to have people test the branch and report how it works/breaks for them. -- Sebastian Kuzminsky

[Emc-users] JA branch is merged into master?

hi folks To someone how knows it, JA(13) is in master? Regards Rck -- Find and fix application performance issues faster with Applications Manager Applications Manager provides deep performance insights into multiple tiers