least.
Chris M
- Reply message -
From: Mark Tucker m...@rmtucker.f2s.com
To: Enhanced Machine Controller (EMC) emc-users@lists.sourceforge.net
Subject: [Emc-users] John Thorntons Gui3 Sample in Linuxcnc 2.6pre
Date: Fri, Feb 7, 2014 6:01 AM
Andy
I had already changed the comment
Date: Tue, 11 Feb 2014 16:29:56 +
From: m...@rmtucker.f2s.com
To: emc-users@lists.sourceforge.net
Subject: Re: [Emc-users] John Thorntons Gui3 Sample in Linuxcnc 2.6pre
Chris
What files would i have to transfer to machinekit to get gaxis_no_plot
to work?
gaxis_no_plot_handler.py
What files would i have to transfer to machinekit to get gaxis_no_plot
to work?
gaxis_no_plot_handler.py and gaxis_noplot.glade etc.
Or will i have to do a full install of ubc3?
Charles did give me the instructions to install your ubc3 and i did try
gaxis_no_plot but is it possible to
] John Thorntons Gui3 Sample in Linuxcnc 2.6pre
I can confirm the very hight CPU Usage of gscreen gaxis! I use an AMD
ATHLON X2-4800+ with 2 GB Ram, not optimized, so no isolcpus etc,
because I use this one as development PC.
Gcsreen Gaxis uses 70 % of CPU 2 and 30 % of CPU 1.
Gaxis
:
Date: Fri, 7 Feb 2014 17:18:28 +0100
From: nie...@web.de
To: emc-users@lists.sourceforge.net
Subject: Re: [Emc-users] John Thorntons Gui3 Sample in Linuxcnc 2.6pre
I can confirm the very hight CPU Usage of gscreen gaxis! I use an AMD
ATHLON X2-4800+ with 2 GB Ram, not optimized, so
So does the instruction NO_FORCE_HOMING = 1 in the [TRAJ] section no
longer circumnavigate this?
Also i hit a new snag yesterday while setting up machinekit gui.
Up until now i have had no problems with the gui running but after
changing the hal file to run my actual machine,the machine on
On 7 February 2014 11:16, Mark Tucker m...@rmtucker.f2s.com wrote:
I now have the following lines in my Hal file:-
newsig test bit
sets test 1
net test iocontrol.0.emc-enable-in
Is this not enough to enable the power button
It should work.
setp iocontrol.0.emc-enable-in 1
would be
Andy
I had already changed the comment to your version but i still have the
same results.
Everything works fine with axis and Gscreen but it will not work with my
custom Gui.
At the end of the day it must be something in the Gui.
I just followed JT's tutorials and it worked fine until i try to
On 7 February 2014 13:57, Mark Tucker m...@rmtucker.f2s.com wrote:
I had already changed the comment to your version but i still have the
same results.
Everything works fine with axis and Gscreen but it will not work with my
custom Gui.
You probabl need to have a look at the machine status.
Andy
I tried as below and everything shows as False.
I have re-downloaded johns example files from
http://gnipsel.com/linuxcnc/gui/gui08a.html
I have re installed them and the gui shows fine but the power button is
greyed out which is exactly what my gui is doing.
I have just altered back to
@lists.sourceforge.net
Subject: [Emc-users] John Thorntons Gui3 Sample in Linuxcnc 2.6pre
Date: Fri, Feb 7, 2014 6:01 AM
Andy
I had already changed the comment to your version but i still have the
same results.
Everything works fine with axis and Gscreen but it will not work with my
custom Gui
(EMC) emc-users@lists.sourceforge.net
Subject: [Emc-users] John Thorntons Gui3 Sample in Linuxcnc 2.6pre
Date: Fri, Feb 7, 2014 6:01 AM
Andy
I had already changed the comment to your version but i still have the
same results.
Everything works fine with axis and Gscreen but it will not work
Please add the emc_stat widget
- Reply message -
From: Mark Tucker m...@rmtucker.f2s.com
To: Enhanced Machine Controller (EMC) emc-users@lists.sourceforge.net
Subject: [Emc-users] John Thorntons Gui3 Sample in Linuxcnc 2.6pre
Date: Fri, Feb 7, 2014 8:28 AM
Chris
There is no emc_stat
Controller (EMC) emc-users@lists.sourceforge.net
Subject: [Emc-users] John Thorntons Gui3 Sample in Linuxcnc 2.6pre
Date: Fri, Feb 7, 2014 8:28 AM
Chris
There is no emc_stat widget present and no mention of power on in the
handler file.
It seems to be purely using the power and estop widgets
m...@rmtucker.f2s.com
To: Enhanced Machine Controller (EMC) emc-users@lists.sourceforge.net
Subject: [Emc-users] John Thorntons Gui3 Sample in Linuxcnc 2.6pre
Date: Fri, Feb 7, 2014 6:01 AM
Andy
I had already changed the comment to your version but i still have the
same results
Sorry, work is pressing... I noticed the Subject says Gui3 and you
downloaded Gui8? Which one are you working on?
I'll try and test with master this evening.
JT
On 2/7/2014 8:49 AM, Mark Tucker wrote:
Andy
I tried as below and everything shows as False.
I have re-downloaded johns example
wrote:
Ok. Please post your files and i will look at after work.
Chris M
- Reply message -
From: Mark Tucker m...@rmtucker.f2s.com
To: Enhanced Machine Controller (EMC) emc-users@lists.sourceforge.net
Subject: [Emc-users] John Thorntons Gui3 Sample in Linuxcnc 2.6pre
Date: Fri, Feb 7
John
See my prev post to chris.
All is working now,on to the next problem.
Thank you.
On 07/02/14 18:13, John Thornton wrote:
Sorry, work is pressing... I noticed the Subject says Gui3 and you
downloaded Gui8? Which one are you working on?
I'll try and test with master this evening.
JT
Machine Controller (EMC) emc-users@lists.sourceforge.net
Subject: [Emc-users] John Thorntons Gui3 Sample in Linuxcnc 2.6pre
Date: Fri, Feb 7, 2014 6:01 AM
Andy
I had already changed the comment to your version but i still have the
same results.
Everything works fine with axis and Gscreen
Ok. Please post your files and i will look at after work.
Chris M
- Reply message -
From: Mark Tucker m...@rmtucker.f2s.com
To: Enhanced Machine Controller (EMC) emc-users@lists.sourceforge.net
Subject: [Emc-users] John Thorntons Gui3 Sample in Linuxcnc 2.6pre
Date: Fri, Feb 7, 2014 9:27
Ok. Please post your files and i will look at after work.
Chris M
- Reply message -
From: Mark Tucker m...@rmtucker.f2s.com
To: Enhanced Machine Controller (EMC) emc-users@lists.sourceforge.net
Subject: [Emc-users] John Thorntons Gui3 Sample in Linuxcnc 2.6pre
Date: Fri, Feb 7, 2014 9:27
Date: Fri, 7 Feb 2014 17:18:28 +0100
From: nie...@web.de
To: emc-users@lists.sourceforge.net
Subject: Re: [Emc-users] John Thorntons Gui3 Sample in Linuxcnc 2.6pre
I can confirm the very hight CPU Usage of gscreen gaxis! I use an AMD
ATHLON X2-4800+ with 2 GB Ram, not optimized, so
On 2/5/2014 3:49 AM, Mark Tucker wrote:
I have been fiddling around with JT's Tutorials,in particular Gui3 shown
here http://gnipsel.com/linuxcnc/gui/index.html.
I can get this to run on 2.5.3 no problem,but when i try to run from 2.6
pre it loads up and you can take the machine out
John
I was running from RIP,Anyway as it is running on the beaglebone i think
i can manage to work on it but thanks for trying to help.
On 05/02/14 11:21, John Thornton wrote:
I should have asked are you running it in a RIP or did you install it?
JT
On 2/5/2014 5:15 AM, Mark Tucker wrote:
24 matches
Mail list logo