Message -
From: Spiderdab77...@tiscali.it
To:Emc-users@lists.sourceforge.net
Sent: Thursday, December 16, 2010 1:23 AM
Subject: [Emc-users] Joypad question.
Hallo list.
Is there a way to jog the axis in joint mode only with keyboard, while
jog in world mode with the joystick?
i'm using
On 16 December 2010 11:42, Spiderdab 77...@tiscali.it wrote:
something like a logical expression which read if the state of world
mode is false or true? is there a pin for that?
http://www.linuxcnc.org/docs/2.4/html/man/man1/halui.1.html
(Look at the halui.mode pins)
what do you mean about :
Il 16/12/2010 13:07, andy pugh ha scritto:
On 16 December 2010 11:42, Spiderdab77...@tiscali.it wrote:
something like a logical expression which read if the state of world
mode is false or true? is there a pin for that?
http://www.linuxcnc.org/docs/2.4/html/man/man1/halui.1.html
(Look at
On 16 December 2010 13:00, Spiderdab 77...@tiscali.it wrote:
the on e wich should interest me is _teleop? right?
than i'm not sure if the joint mode is _joint or _manual. what's the
difference?
It might be easiest to watch them in Show HAL Config and see what they do.
--
atp
Torque wrenches
Il 16/12/2010 14:35, andy pugh ha scritto:
On 16 December 2010 13:00, Spiderdab77...@tiscali.it wrote:
the on e wich should interest me is _teleop? right?
than i'm not sure if the joint mode is _joint or _manual. what's the
difference?
It might be easiest to watch them in Show HAL Config
Alex, i've a question for you, since, if i'm not wrong, you wrote down
the tripodkins.c .
have you ever tried to jog into world mode the tripod with a joystick?
did it work?
i'm asking about this thing everywhere, but nobody can tell me if it
work or not with a non-trivial kinematics.
thanks
is still in
development/testing phase, so use with caution.
Regards,
Alex
- Original Message -
From: Spiderdab 77...@tiscali.it
To: Enhanced Machine Controller (EMC) emc-users@lists.sourceforge.net
Sent: Thursday, December 16, 2010 5:04 PM
Subject: Re: [Emc-users] Joypad question
Il 16/12/2010 16:21, Alex Joni ha scritto:
Hi Davide,
that's a question that's a bit hard to answer.
I remember doing it, but that was around emc2 - 2.1 or even older.
In the current versions (due to some bugfixes), I think this is prevented.
Can't remember the reason though.
I know it
Hallo list.
Is there a way to jog the axis in joint mode only with keyboard, while
jog in world mode with the joystick?
--
Lotusphere 2011
Register now for Lotusphere 2011 and learn how
to connect the dots, take your
To: Emc-users@lists.sourceforge.net
Sent: Thursday, December 16, 2010 1:23 AM
Subject: [Emc-users] Joypad question.
Hallo list.
Is there a way to jog the axis in joint mode only with keyboard, while
jog in world mode with the joystick
10 matches
Mail list logo
