2012/1/25 Peter C. Wallace p...@mesanet.com
Both would need a new firmware files (SVST12_12_7I52S, SVST12_12_7I47)
We intend to use 7i23+7i47x2.
Where can we find SVST12_12_7I47 firmware and pinout?
Thanks!
Andrew
--
On Wed, 25 Jan 2012, Andrew wrote:
Date: Wed, 25 Jan 2012 23:13:51 +0200
From: Andrew parallel.kinemat...@gmail.com
Reply-To: Enhanced Machine Controller (EMC)
emc-users@lists.sourceforge.net
To: Enhanced Machine Controller (EMC) emc-users@lists.sourceforge.net
Subject: Re: [Emc-users
2012/1/27 Peter C. Wallace p...@mesanet.com
I found freeby.mesanet.com/SVST6_6.BIT, is it the last version?
Dont think its for a 7I43. What size 7I43 do you have?
400K
Andrew
--
Try before you buy = See our experts
Hello,
Some questions regarding MESA cards:
1. Please confirm the configuration 7i43+7i48 for 6 channel analog servo.
Is there full firmware support?
2. The friend's machine has 7 servos (including 3 spindles) in step/dir
mode, and RS422 is preferred for higher input frequency. Which RS422
On Wed, 25 Jan 2012, Andrew wrote:
Date: Wed, 25 Jan 2012 19:26:50 +0200
From: Andrew parallel.kinemat...@gmail.com
Reply-To: Enhanced Machine Controller (EMC)
emc-users@lists.sourceforge.net
To: Enhanced Machine Controller (EMC) emc-users@lists.sourceforge.net
Subject: [Emc-users
On Wed, 2012-01-25 at 19:26 +0200, Andrew wrote:
... snip
2. The friend's machine has 7 servos (including 3 spindles) in step/dir
mode, and RS422 is preferred for higher input frequency. Which RS422
daughter cards for 5i20 (or other FPGA) are supported with hardware?
... snip
What servo
-users@lists.sourceforge.net
Subject: [Emc-users] MESA questions
Hello,
Some questions regarding MESA cards:
1. Please confirm the configuration 7i43+7i48 for 6 channel analog servo.
Is there full firmware support?
Yes, but you do need to use LinuxCNC 2.5 to support the 7I48
a 5I25
2012/1/25 Kirk Wallace kwall...@wallacecompany.com
What servo drivers does he have? If the drivers have the option, it
might be better to use a torque or velocity input.
No analog option, unfortunately.
RS422 is a standard that describes handling a signal through a pair of
wires.
(EMC) emc-users@lists.sourceforge.net
Subject: [Emc-users] MESA questions
Hello,
Some questions regarding MESA cards:
1. Please confirm the configuration 7i43+7i48 for 6 channel analog servo.
Is there full firmware support?
Yes, but you do need to use LinuxCNC 2.5 to support the 7I48
2012/1/25 Peter C. Wallace p...@mesanet.com
Thanks! I probably stick to 7i43 as I already have it. Which firmware
should I use here?
SVST6_6
Which 5i23 firmware goes for both cases?
Both would need a new firmware files (SVST12_12_7I52S, SVST12_12_7I47)
Thanks, Peter! Just ordered
10 matches
Mail list logo