On Fri, 16 Mar 2012, Curtis Dutton wrote:
> Date: Fri, 16 Mar 2012 15:01:06 -0400
> From: Curtis Dutton
> Reply-To: "Enhanced Machine Controller (EMC)"
>
> To: "Enhanced Machine Controller (EMC)"
> Subject: Re: [Emc-users] Mesa 5i25 with "Generic&
nd then your password.
>
> after that when you run PNCconf you will be able to select
> the 5i25 board and the prob_rfx2 firmware.
>
> Chris M
> From: chrisinnana...@hotmail.com
> To: emc-users@lists.sourceforge.net
> Subject: RE: [Emc-users] Mesa 5i25 wi
rd.
after that when you run PNCconf you will be able to select
the 5i25 board and the prob_rfx2 firmware.
Chris M
From: chrisinnana...@hotmail.com
To: emc-users@lists.sourceforge.net
Subject: RE: [Emc-users] Mesa 5i25 with "Generic" stepper board
Date: Thu, 23 Feb 2012 10:56:38 +
> I'm a bit shaky on how to configure this as I just started studying it last
> night, however it appears to me that if I created a "prob_rfx2.xml" file,
> that I could utilize
> pncconf to build my emc2 configuration.
>
> I have the prob_rfx2.pin file that describes all of the pins that the
> f
> I elected to use the "prob_rfx2" firmware version which is meant for the
> "generic" breakout board.
>
> The idea was to install the 5i25, hook my parallel cable from the printer
> port into the 5i25 and set up a new emc2 config.
>
>
> I'm a bit shaky on how to configure this as I just start
On Wed, 22 Feb 2012, Curtis Dutton wrote:
> Date: Wed, 22 Feb 2012 13:26:53 -0500
> From: Curtis Dutton
> Reply-To: "Enhanced Machine Controller (EMC)"
>
> To: "Enhanced Machine Controller (EMC)"
> Subject: Re: [Emc-users] Mesa 5i25 with "Generi
I'll report back with what I learn.
On Wed, Feb 22, 2012 at 1:12 PM, Stephen Dubovsky wrote:
> Curt,
> If you could take notes, I'll be in a similar boat soon. I just got my
> 5i25 from mesa and am just waiting to pickup a spare computer from a friend
> to play with it. I don't want to run emc2
Curt,
If you could take notes, I'll be in a similar boat soon. I just got my
5i25 from mesa and am just waiting to pickup a spare computer from a friend
to play with it. I don't want to run emc2.5 on the "working machine" yet.
If I can get it working I'll put them in all 3 PCs. I bought a 7i76 t
On 22 February 2012 17:41, Curtis Dutton wrote:
> I'm a bit shaky on how to configure this as I just started studying it last
> night, however it appears to me that if I created a "prob_rfx2.xml" file,
> that I could utilize
> pncconf to build my emc2 configuration.
>
> I have the prob_rfx2.pin f
I recently received my new 5i25 card. I'm using it to replace software
stepping on a 3 Axis machine.
It is very basic,
3 stepper drivers.
1 probe in port.
3 sets of limit/home switches where each set is shared for an axis and the
limit switches are used for homing as well.
I elected to use the
10 matches
Mail list logo