On Sun, Apr 01, 2012 at 02:08:35PM -0500, Chris Radek wrote:
http://wiki.linuxcnc.org/cgi-bin/wiki.pl?UpdatingTo2.5
Be sure to check the Changes to your configuration section at the
bottom of the page.
Hey, I've added another thing to Changes to your configuration and
those of you who
2012/4/2 John Prentice j...@castlewd.freeserve.co.uk:
I am having trouble following the process in the link with Lucid. On the
Reload step I get: the screen at
www.castlewoodconsultants.com/Misc/Upgrade2-5Trouble.jpg
Be sure you have typed the line exactly like
deb http://linuxcnc.org/
I'd also like to add my thanks to all those who worked on this and
delivered!
Mark
On 04/01/2012 05:32 PM, Dave wrote:
I agree. Thanks for the effort!
Dave
On 4/1/2012 3:41 PM, Kent A. Reed wrote:
As ever, a sincere tip-of-the-hat to you, Chris, Seb, and everyone.
Regards,
Kent
From: Chris Radek ch...@timeguy.com
Subject: [Emc-users] RELEASED: LinuxCNC 2.5.0
LinuxCNC 2.5.0 is released!
You will not get an automatic update from EMC 2.4 to LinuxCNC 2.5.
To update your Lucid or Hardy machine to 2.5, you need to take a few
steps, documented here:
http
On Mon, Apr 02, 2012 at 02:04:10PM +0100, John Prentice wrote:
I am having trouble following the process in the link with Lucid. On the
Reload step I get: the screen at
www.castlewoodconsultants.com/Misc/Upgrade2-5Trouble.jpg
Be sure you have typed the line exactly like
deb
Subject: Re: [Emc-users] RELEASED: LinuxCNC 2.5.0
On Mon, Apr 02, 2012 at 02:04:10PM +0100, John Prentice wrote:
I am having trouble following the process in the link with Lucid. On the
Reload step I get: the screen at
www.castlewoodconsultants.com/Misc/Upgrade2-5Trouble.jpg
Be sure you
On Monday, April 02, 2012 09:24:27 AM Mark Wendt did opine:
I'd also like to add my thanks to all those who worked on this and
delivered!
Mark
I'll 2nd those thoughts although I haven't yet tried 2.5.0. I have been on
master-rt, the 2.6.0-hashnumber builds for about 4 months now, which
On Mon, Apr 02, 2012 at 03:06:32PM +0100, John Prentice wrote:
Indeed - exactly the trouble. Thanks
As I have had stuff downloaded at various times from Buildbot and git, I
think I will wait for the 2.5 Live CD and start over - after upgrading I
still have innumerable folders/files with
- Original Message -
From: Chris Radek ch...@timeguy.com
snip
The upgrade should
just work no matter what you have had installed, unless you've used
packages from master/2.6 (in which case 2.5.0 is a downgrade you need
to do manually).
The only thing you have to do is move your
On 4/2/2012 10:36 AM, Chris Radek wrote:
Also, the new CD image is up already.
Wow, you guys have been working!
Dave
--
This SF email is sponsosred by:
Try Windows Azure free for 90 days Click Here
-BEGIN PGP SIGNED MESSAGE-
Hash: SHA1
On 4/2/2012 9:50 AM, John Prentice wrote:
I must be being blind but I cannot see how to get the 2.5 Live CD
from any links on linuxcnc.org Home or Downloads. It is difficult
to tell what versions are referred to but the Getting Started Guide
link
Charles is exactly right, the ubuntu-10.04-linuxcnc2-i386.iso file is the
updated Lucid Live CD with LinuxCNC 2.5.0. The 2 after linuxcnc
distinguishes it from the EMC 2.4 Live CD.
On Apr 2, 2012, at 09:11 , Charles Steinkuehler wrote:
-BEGIN PGP SIGNED MESSAGE-
Hash: SHA1
On
Thanks to both. Installing now.
John Prentice
- Original Message -
From: Sebastian Kuzminsky s...@highlab.com
To: Enhanced Machine Controller (EMC) emc-users@lists.sourceforge.net
Sent: Monday, April 02, 2012 4:38 PM
Subject: Re: [Emc-users] RELEASED: LinuxCNC 2.5.0
Charles
Chris Seb,
Thanks!
Having been the release manager during 2.4, I am very aware of all the
work that a release requires, and due to the rebranding 2.5 required
even more work was in order for the packaging.
Jeff
--
On Mon, 2 Apr 2012 09:36:31 -0500, you wrote:
The new linuxcnc 2.5.0 package will replace all previous 2.4 and 2.5
buildbot packages, as well as all emc2 packages. The upgrade should
just work no matter what you have had installed, unless you've used
packages from master/2.6 (in which case
Thank you to all of you (as always) for the excelent job!.
--
*Leonardo Marsaglia*.
--
Better than sec? Nothing is better than sec when it comes to
monitoring Big Data applications. Try Boundary one-second
resolution
- Original Message -
From: Steve Blackmore st...@pilotltd.net
To: Enhanced Machine Controller (EMC) emc-users@lists.sourceforge.net
Sent: Monday, April 02, 2012 6:46 PM
Subject: Re: [Emc-users] RELEASED: LinuxCNC 2.5.0
On Mon, 2 Apr 2012 09:36:31 -0500, you wrote:
The new linuxcnc 2.5.0
LinuxCNC 2.5.0 is released!
You will not get an automatic update from EMC 2.4 to LinuxCNC 2.5.
To update your Lucid or Hardy machine to 2.5, you need to take a few
steps, documented here:
http://wiki.linuxcnc.org/cgi-bin/wiki.pl?UpdatingTo2.5
Be sure to check the Changes to your
great to hear! Can someone do a video of the Touchy interface with all the new
features please?
Paul
- Original Message -
From: Chris Radek ch...@timeguy.com
Date: Sunday, April 1, 2012 12:09 pm
Subject: [Emc-users] RELEASED: LinuxCNC 2.5.0
To: emc-users@lists.sourceforge.net
As ever, a sincere tip-of-the-hat to you, Chris, Seb, and everyone.
Regards,
Kent
--
This SF email is sponsosred by:
Try Windows Azure free for 90 days Click Here
http://p.sf.net/sfu/sfd2d-msazure
I agree. Thanks for the effort!
Dave
On 4/1/2012 3:41 PM, Kent A. Reed wrote:
As ever, a sincere tip-of-the-hat to you, Chris, Seb, and everyone.
Regards,
Kent
--
This SF email is sponsosred by:
Try Windows
MANY THANKS to all those that worked on this.
I looked over the changes and saw several that may change things I've
been grumpy about.
Dave
On Sun, 1 Apr 2012 14:08:35 -0500
Chris Radek ch...@timeguy.com wrote:
LinuxCNC 2.5.0 is released!
You will not get an automatic update from
On 04/01/2012 02:08 PM, Chris Radek wrote:
LinuxCNC 2.5.0 is released!
You will not get an automatic update from EMC 2.4 to LinuxCNC 2.5.
To update your Lucid or Hardy machine to 2.5, you need to take a few
steps, documented here:
http://wiki.linuxcnc.org/cgi-bin/wiki.pl?UpdatingTo2.5
Chris Radek wrote:
LinuxCNC 2.5.0 is released!
Thanks so much for this effort! If you could add a note in the release
notes
about PPMC, that velocity estimation on the UPC board is added, I'd
appreciate it.
The instructions for the update is great, average users should be able
to
On Sun, Apr 01, 2012 at 06:25:07PM -0500, Mark Cason wrote:
is the sim version going to be available soon?
There are 2.5.0 packages for 6 sim platforms and 3 realtime:
lucid/linuxcnc2.5-sim/binary-amd64
lucid/linuxcnc2.5-sim/binary-i386
lucid/linuxcnc2.5/binary-i386
25 matches
Mail list logo
