We had about 10" of snow on the ground before the short melt hit, making
things a bit soggy. Then the temps dropped again and we got another 3 -
4 inches over the last couple of days. Hopefully, they'll have the
roads cleared by the time I set out.
Mark
On 01/11/2016 08:14 AM, Peter Blodow
On 01/10/2016 04:23 PM, Dave Cole wrote:
> I understand.I'm working out of town and just came back for the
> weekend.
>
> For me this is a good time to be distracted with too much work.
>
> It helps me ignore the wind gusts to 30 mph, the snow, and the temps
> headed to 8 degrees F for
Mark, it surely was interesting, when I drove to Traverse City last
time, some 50 years ago, when I was temporarily a Michigander. Was a
nice skiing weekend.
Peter
Am 11.01.2016 13:34, schrieb Mark:
> 8 Degrees and snowing here in Grayling, MI this morning. I have to
> drive over to Traverse
On Monday 11 January 2016 08:35:59 Mark wrote:
> We had about 10" of snow on the ground before the short melt hit,
> making things a bit soggy. Then the temps dropped again and we got
> another 3 - 4 inches over the last couple of days. Hopefully, they'll
> have the roads cleared by the time I
Well none of the suggestions about star grounding did any good. In fact
they made the problem worse than before, so bad I could not even get 2.6
to run. Off this list I was sent the AB servo best wiring practices pdf
which explained how to reduce noise in a servo drive enclosure. I
followed
On 01/10/2016 12:44 PM, John Thornton wrote:
> Well none of the suggestions about star grounding did any good. In
> fact they made the problem worse than before, so bad I could not even
> get 2.6 to run.
That may suggest a couple of things being wrong simultaneously:
1) you may still have loops
Do you have filters just prior to the input power on the AB Servo drives?
I've also had problems with Teco servo drives backfeeding noise into the
AC line and messing with Mesa boards.
An input filter from AD fixed that problem as well.
Dave
On 1/10/2016 6:44 AM, John Thornton wrote:
> Well
On 01/10/2016 02:48 PM, Bertho Stultiens wrote:
> The sserial connection has a great potential for a loop. See attached
> image for illustration. The image has a shielded connection between two
> devices, which is good. However, the 0VDC connection (aka GND), which is
> embedded in the shielded
I don't have AB drives... I have a filter on my GS2 and another one
after the control transformer.
JT
On 1/10/2016 11:40 AM, Dave Cole wrote:
> Do you have filters just prior to the input power on the AB Servo drives?
>
> I've also had problems with Teco servo drives backfeeding noise into the
I tried to find the original message in previous monster thread to have
a better understanding of the problem but could not find it. I can't
remember seeing what is connecting to VFD and few other things. I assume
it's a Mesa board but which one? [1]
We all seem to keep running in circles
I understand.I'm working out of town and just came back for the
weekend.
For me this is a good time to be distracted with too much work.
It helps me ignore the wind gusts to 30 mph, the snow, and the temps
headed to 8 degrees F for tonight.
Except that I need to drive a long ways in this
My mistake, gotta clean my glasses apparently.
What are you using for axes drives?
Dave
On 1/10/2016 3:35 PM, John Thornton wrote:
> I don't have AB drives... I have a filter on my GS2 and another one
> after the control transformer.
>
> JT
>
> On 1/10/2016 11:40 AM, Dave Cole wrote:
>> Do you
The original Anliam drives and power supply.
JT
On 1/10/2016 2:41 PM, Dave Cole wrote:
> My mistake, gotta clean my glasses apparently.
>
> What are you using for axes drives?
>
> Dave
>
> On 1/10/2016 3:35 PM, John Thornton wrote:
>> I don't have AB drives... I have a filter on my GS2 and
Still trying to digest this in between working...
On 1/10/2016 7:48 AM, Bertho Stultiens wrote:
> On 01/10/2016 12:44 PM, John Thornton wrote:
>> Well none of the suggestions about star grounding did any good. In
>> fact they made the problem worse than before, so bad I could not even
>> get 2.6
Hmm.. perhaps you should tell Peter that Missouri is wonderful this time
of year.
Perhaps he will schedule a flight to the "show me state". :-)
Dave
On 1/10/2016 3:35 PM, John Thornton wrote:
> I don't have AB drives... I have a filter on my GS2 and another one
> after the control
15 matches
Mail list logo