k. Or in a standard collet without issues. I
> don't seem to have that luck.
>
> Anyway. My request for measurements was to try and get an idea of how
> widespread tap shank and square variations are.
>
> John
>
>
> > -----Original Message-
> > From: Rol
On Fri, 10 Dec, 2021 at 3:44 AM, John Dammeyer wrote: To: 'enhanced machine
controller (emc)'
Well there are standards but more and more it doesn't look like they are being
followed.
Since this forum is all about CNC my request follows with the subject of power
tapping. To hold the taps so the
request for measurements was to try and get an idea of how
widespread tap shank and square variations are.
John
> -Original Message-
> From: Roland Jollivet [mailto:roland.jolli...@gmail.com]
> Sent: December-09-21 9:22 PM
> To: Enhanced Machine Controller (EMC)
> Subje
Hi
Shank diameter 5.9 or 6.2 (near the square, thinner near the thread)
Square size 4.75 to 4.85 mm
But I've had ones with smaller shanks and/or heads.
On 12/9/2021 22:56, johnd wrote:
Mini surveyIf you have an M6 x1.0 tap in your tool box what is the shank and
flat dimension?Sent from my Sam
On Thu, 9 Dec, 2021 at 4:32 PM, johnd wrote:
To: enhanced machine controller (emc)
Hi Gene. Would you measure and post the results please.I bought a very
expensive spiral tap that I expected would meet ISO or DIN standards.
Not!Another I have also doesn't. So I'm curious. Thanks John
Now y
e: 2021-12-09 1:09 p.m. (GMT-08:00) To: emc-users@lists.sourceforge.net
Subject: Re: [Emc-users] Tap size On Thu, 9 Dec, 2021 at 3:58 PM, johnd
wrote: To: enhanced machine controller (emc)Mini
surveyIf you have an M6 x1.0 tap in your tool box what is the shank and flat
dimension?Sent from
On 12/9/21 2:56 PM, johnd wrote:
Mini surveyIf you have an M6 x1.0 tap in your tool box what is the shank and
flat dimension?Sent from my Samsung S10
___
Emc-users mailing list
Emc-users@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinf
There are a couple of different standards.
Iso
Jis
And a few more
On Fri, 10 Dec 2021, 10:00 johnd, wrote:
> Mini surveyIf you have an M6 x1.0 tap in your tool box what is the shank
> and flat dimension?Sent from my Samsung S10
> ___
> Emc-users mai
On Thu, 9 Dec, 2021 at 3:58 PM, johnd wrote:
To: enhanced machine controller (emc)
Mini surveyIf you have an M6 x1.0 tap in your tool box what is the shank and
flat dimension?Sent from my Samsung S10
It will vary John, I have at least 3 of them, and no two are the same size.
Get one and me
Mini surveyIf you have an M6 x1.0 tap in your tool box what is the shank and
flat dimension?Sent from my Samsung S10
___
Emc-users mailing list
Emc-users@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/emc-users
10 matches
Mail list logo