2012/1/25 Peter C. Wallace
> Both would need a new firmware files (SVST12_12_7I52S, SVST12_12_7I47)
We intend to use 7i23+7i47x2.
Where can we find SVST12_12_7I47 firmware and pinout?
Thanks!
Andrew
--
Try before you b
2012/1/27 Peter C. Wallace
> > I found freeby.mesanet.com/SVST6_6.BIT, is it the last version?
>
> Dont think its for a 7I43. What size 7I43 do you have?
>
> 400K
Andrew
--
Try before you buy = See our experts in action!
On Wed, 25 Jan 2012, Andrew wrote:
> Date: Wed, 25 Jan 2012 23:13:51 +0200
> From: Andrew
> Reply-To: "Enhanced Machine Controller (EMC)"
>
> To: "Enhanced Machine Controller (EMC)"
> Subject: Re: [Emc-users] MESA questions
>
> 2012/1/25 Peter C
2012/1/25 Peter C. Wallace
> > Thanks! I probably stick to 7i43 as I already have it. Which firmware
> > should I use here?
> >
> SVST6_6
> >
> >> Which 5i23 firmware goes for both cases?
> Both would need a new firmware files (SVST12_12_7I52S, SVST12_12_7I47)
>
> Thanks, Peter! Just ordered 7i48
On Wed, 25 Jan 2012, Andrew wrote:
> Date: Wed, 25 Jan 2012 20:36:21 +0200
> From: Andrew
> Reply-To: "Enhanced Machine Controller (EMC)"
>
> To: "Enhanced Machine Controller (EMC)"
> Subject: Re: [Emc-users] MESA questions
>
> 2012/1/25 Peter
2012/1/25 Kirk Wallace
> What servo drivers does he have? If the drivers have the option, it
> might be better to use a torque or velocity input.
>
> No analog option, unfortunately.
> RS422 is a standard that describes handling a signal through a pair of
> wires. Generally, I believe any digit
2012/1/25 Peter C. Wallace
> On Wed, 25 Jan 2012, Andrew wrote:
>
> > Date: Wed, 25 Jan 2012 19:26:50 +0200
> > From: Andrew
> > Reply-To: "Enhanced Machine Controller (EMC)"
> >
> > To: "Enhanced Machine Controller (EMC)" >
> > Subject: [Emc-users] MESA questions
> >
> > Hello,
> >
> > S
On Wed, 2012-01-25 at 19:26 +0200, Andrew wrote:
... snip
> 2. The friend's machine has 7 servos (including 3 spindles) in step/dir
> mode, and RS422 is preferred for higher input frequency. Which RS422
> daughter cards for 5i20 (or other FPGA) are supported with hardware?
... snip
What servo driv
On Wed, 25 Jan 2012, Andrew wrote:
> Date: Wed, 25 Jan 2012 19:26:50 +0200
> From: Andrew
> Reply-To: "Enhanced Machine Controller (EMC)"
>
> To: "Enhanced Machine Controller (EMC)"
> Subject: [Emc-users] MESA questions
>
> Hello,
>
> Some questions regarding MESA cards:
> 1. Please confi
