though I wouldn't
think it will be all that much longer.
Alan
-Original Message-
From: Sasa Vilic [mailto:sasavi...@gmail.com]
Sent: Friday, March 27, 2009 7:55 PM
To: alano...@att.net; Enhanced Machine Controller (EMC)
Subject: Re: [Emc-users] THC Systems for plasma?
I already
On 29 Mar 2009 at 16:22, Glen wrote:
Is there anything to stop the torch diving when it goes over the
edge of
the plate ?
Glen.
The programmer.
John
--
___
it will be all that much longer.
Alan
-Original Message-
From: Sasa Vilic [mailto:sasavi...@gmail.com]
Sent: Friday, March 27, 2009 7:55 PM
To: alano...@att.net; Enhanced Machine Controller (EMC)
Subject: Re: [Emc-users] THC Systems for plasma?
I already have one. It's good, but it has
Sasa,
I would suggest using the Sound Logic THC.
They have both a cabinet and rack mount unit.
http://soundlogicus.com/Default.aspx
I've heard of several other EMC2 users who really like it.
I'll be going with one of these as soon as my table is ready too.
Alan
-Original Message-
I already have one. It's good, but it has problem, that you can not see,
which reference voltage you have set. It happens than, that if operator set
voltage too low, than usually after start, the torch hits table. Jim said to
me, that they are building new one (digital), but unfortunately I can't