S, Kirk Wallace pis(e:
On Sun, 2011-01-09 at 16:13 -0800, Kirk Wallace wrote:
In case anyone might be interested, I added a charge pump page to the
wiki. If any one has charge pump information or machine configurations
they would like to share on that page, please add it to the page.
These big machines running EMC2 are just very cool! Been watching this
big girl come to life since you started posting the vids. Thanks for
keeping us in the loop Sam!
Mark
On 01/09/2011 11:30 AM, sa...@empirescreen.com wrote:
That is the spindle collet unclamp. It moves forward about .05
On Mon, 2011-01-10 at 08:56 +0200, Slavko Kocjancic wrote:
... snip
As e_stop_latch has near same output (one of them) it's good idea to
mention it in that wiki.
I mentioned in the wiki that it may be appropriate to use the charge
pump detector as _part_ of an e-stop system. E-stop is a
On Mon, 2011-01-10 at 07:21 -0800, Kirk Wallace wrote:
On Mon, 2011-01-10 at 08:56 +0200, Slavko Kocjancic wrote:
... snip
As e_stop_latch has near same output (one of them) it's good idea to
mention it in that wiki.
I mentioned in the wiki that it may be appropriate to use the charge
On Mon, 2011-01-10 at 07:47 -0800, Kirk Wallace wrote:
On Mon, 2011-01-10 at 07:21 -0800, Kirk Wallace wrote:
On Mon, 2011-01-10 at 08:56 +0200, Slavko Kocjancic wrote:
... snip
As e_stop_latch has near same output (one of them) it's good idea to
mention it in that wiki.
Uugh, there
On Sun, 09 Jan 2011 15:04 -0800, Kirk Wallace
kwall...@wallacecompany.com wrote:
On Sun, 2011-01-09 at 12:41 -0600, Jon Elson wrote:
The hal component encoder is a specific implementation of an encoder,
equivalent in function
to a general encoder counter module which might be partly
2011/1/5 Alex Joni alex.j...@robcon.ro:
Please correct me, if I am wrong, but if I will change this line:
81 genser-links[t].quantity = GO_QUANTITY_ANGLE;
to this one:
81 genser-links[t].quantity = GO_QUANTITY_LENGTH;
then it will change all the joints from angular to linear.
snip
Since my impression is that the TYPE(t) value cannot be set to
GO_QUANTITY_LENGTH or GO_QUANTITY_ANGLE, but rather it will be either
1 or 0, determining, if joint is angular or linear, I would like to
ask, if anyone could comment, which of the following examples of code
is correct to
