Jack
In this case Google is your friend. There are literally thousands of
ideas from guys who have done their own thing. Two things I recommend
that you don't do without.
1: You must fit a THC of sorts. Especially if you are going to cut
thinner materials.
2: You must fit a water bed for your
2013/9/6 Gregg Eshelman g_ala...@yahoo.com
On Thu, 9/5/13, Sven Wesley svenne.d...@gmail.com wrote:
...
gantry weight around 80-90 kg and is driven by small Nidec
servos rated at 80 V (really small).
That's not even 200 pounds. The table on this mill is 10x50 - 25.4x127
2013/9/6 Marius Liebenberg mar...@mastercut.co.za
Jack
In this case Google is your friend. There are literally thousands of
ideas from guys who have done their own thing. Two things I recommend
that you don't do without.
1: You must fit a THC of sorts. Especially if you are going to cut
On Thu, 9/5/13, Jon Elson el...@pico-systems.com wrote:
Subject: Re: [Emc-users] BeagleBone Image Available
To: Ron Bean bucketwo...@rbean.users.panix.com, Enhanced Machine
Controller (EMC) emc-users@lists.sourceforge.net
Date: Thursday, September 5, 2013, 8:08 PM
Ron Bean wrote:
I still
On Thu, 9/5/13, Jack Coats j...@coats.org wrote:
Subject: [Emc-users] Plasma Table
To: Enhanced Machine Controller (EMC) Emc-users@lists.sourceforge.net
Date: Thursday, September 5, 2013, 8:47 PM
Has anyone done a DIY plasma table,
or have suggestions I could find
out about a DIY version?
Yes, I built my own plasma table.
http://s47.photobucket.com/user/johnplctech/library/Plasma%20Cutter?sort=3page=1
In these videos I didn't have a THC
http://www.youtube.com/watch?v=e70jdiDm7yc
http://www.youtube.com/watch?v=knf3cPrZPrk
http://www.youtube.com/watch?v=3o84BzF90JM
I have a few computers with a live OS (Porteus, great little distro). I've
tried to setup up the simulator but even though it looks to me that I have
the missing libs installed they are still missing. I want to run a few of
these with LinuxCNC for educational and testing purpose.
Has someone
John
I take it that you used the Mesa THCAD with your current THC comp?
On 2013/09/06 12:55 PM, John Thornton wrote:
Yes, I built my own plasma table.
http://s47.photobucket.com/user/johnplctech/library/Plasma%20Cutter?sort=3page=1
In these videos I didn't have a THC
On Fri, Sep 6, 2013 at 12:23 PM, Kirk Wallace
kwall...@wallacecompany.comwrote:
On 09/05/2013 02:31 AM, Mark Wendt wrote:
... snip
That's not a LinuxCNC/Axis error, that's an X error. There should be
something in the X logs that point to the problem. Look in your home
directory for the
On 09/05/2013 02:31 AM, Mark Wendt wrote:
... snip
That's not a LinuxCNC/Axis error, that's an X error. There should be
something in the X logs that point to the problem. Look in your home
directory for the .xsession-errors file. Should say in there what
parameter caused the X window to
On 6 September 2013 16:54, Ralph Stirling ralph.stirl...@wallawalla.edu wrote:
I suspect I need to create a stepgen in
velocity mode for the syringe, and connect its velocity command
to the product of hypot with the three velocity-fb pins and the gain
parameter.
Yes, that is exactly what I
I am setting up a dispensing application, and would like
to drive a stepgen at a rate proportional to the current
vector velocity. I recall reading some discussion of this
kind of application a year or two ago, but can't find it in
the archives. Basically, I have a little Haydon linear
stepper
One more question on the way to a solution. I've found
references on how to pass hal signals to ngc programs,
but not vice versa. If I want to use a parameter from my
ngc program in my hal logic, how do I pass it? Will I need
to hijack something like spindle speed or can I pass arbitrary
On 09/06/2013 10:05 AM, Kirk Wallace wrote:
On 09/06/2013 09:32 AM, Mark Wendt wrote:
... snip
You did say you were running VNC, correct? If so, check post #2 and #4.
... snip
I installed tightvnc on the LinuxCNC PC.
For fun, I tried running glxgears through VNC and it failed.
Xlib:
On 09/06/2013 09:32 AM, Mark Wendt wrote:
... snip
You did say you were running VNC, correct? If so, check post #2 and #4.
... snip
I installed tightvnc on the LinuxCNC PC.
For fun, I tried running glxgears through VNC and it failed.
Xlib: extension GLX missing on display :1.0
Error:
On 6 September 2013 18:33, Ralph Stirling ralph.stirl...@wallawalla.edu wrote:
If I want to use a parameter from my
ngc program in my hal logic, how do I pass it?
http://www.linuxcnc.org/docs/html/gcode/m-code.html#sec:M67-Analog-Output
--
atp
If you can't fix it, you don't own it.
Well that was interesting.
I created a, modest, screw compensation file and I'm most impressed by
the effect.
I added a limit switch for X home in the middle of the table (to get
some repeatability of the axis screw position) and did:
HOME reset DRO X-Axis
G0 X100 take
Correct my current setup is Mesa 5i25, 7i76, THCAD and Gecko 203v's with
Nema 23 triple stack steppers.
JT
On 9/6/2013 9:34 AM, Marius Liebenberg wrote:
John
I take it that you used the Mesa THCAD with your current THC comp?
On 2013/09/06 12:55 PM, John Thornton wrote:
Yes, I built my own
On Mon, Sep 2, 2013 at 1:06 PM, John Morris j...@zultron.com wrote:
Best of all is to use a dedicated NIC and crossover cable for each device.
Practically all modern network cards have polarity autonegotiation
Auto-MDIX. I think this is at hardware level.
19 matches
Mail list logo
