I was so annoyed that the estimates for my 3d printing jobs were so far off
(estimated 2 hours, took 8) that I modified the axis code. It looks at the
Velocity and acceleration of each axis and tries to calculate a more
accurate time. It only looks at moves - no G64 or probing. It isn't
On 10/15/14 4:07 AM, Frank Tkalcevic wrote:
I was so annoyed that the estimates for my 3d printing jobs were so far off
(estimated 2 hours, took 8) that I modified the axis code. It looks at the
Velocity and acceleration of each axis and tries to calculate a more
accurate time. It only looks
My guess is the new tool planner's G64 settings are throwing off the estimate.
Try the real time with tighter G64 PXXX, and I suspect your results will differ.
- Original Message -
From: Sebastian Kuzminsky s...@highlab.com
To: Enhanced Machine Controller (EMC)
I'm planning on using these pins: http://www.ebay.com/itm/141233257616
which are .053 in dia. with 5mm and .150 pitch.
I would like to connect to the pogos with a connector rather than
soldering a wire. I would like the connector to be between two boards:
How about running the actual machine empty for one cycle?
Nicklas Karlsson
On Wed, 15 Oct 2014 21:07:28 +1100
Frank Tkalcevic fr...@franksworkshop.com.au wrote:
I was so annoyed that the estimates for my 3d printing jobs were so far off
(estimated 2 hours, took 8) that I modified the axis
Could you use a tag cable? (there are other sources of the same thing.) We
use them for programming.
http://www.tag-connect.com/
Samtec makes header sockets that can come up through the bottom of the
board. We use those too.
SMD
On Wed, Oct 15, 2014 at 3:50 PM, Kirk Wallace
I'm not sure exactly what you are aiming for, but I did something a little
while ago that I think is very similar.
I got the sockets that the pins fit into. They have a step in the outside
diameter. I laid out the upper board with holes that the entire socket
fits thru, and the lower board with
I just remembered that I had a detailed drawing of what I did. A
picture is worth a thousand words. See attached.
This was a test fixture for a small PC board. The main part of
the fixture was a board on the bottom, with short pins that
contacted the back of the board under test. The pogo
On 10/15/2014 02:06 PM, John Kasunich wrote:
I just remembered that I had a detailed drawing of what I did. A
picture is worth a thousand words. See attached.
... snip
Thank you Dennis and John. I didn't realize the pins are meant to be
used with sockets. The sockets offer some flexibility.
On 10/15/2014 02:50 PM, Kirk Wallace wrote:
I'm planning on using these pins: http://www.ebay.com/itm/141233257616
which are .053 in dia. with 5mm and .150 pitch.
I would like to connect to the pogos with a connector rather than
soldering a wire. I would like the connector to be between two
The Axis Gui somewhere along the way lost the Machine Velocity display
apparently?
I think it might still be there but it may be black text on a black
background.
Does anyone have an idea how to fix this?
Under View, there is a show/don't show Machine Velocity selection, but
it doesn't
11 matches
Mail list logo
