Jon;
I have some wall warts for a defunct portable phone charger base that
measures, no load, 13.1 volts. I am considering using one of them for
the 12 volts your pwm servo amp needs.
This is not enough overvoltage to make a 7812 work, and if the logic draw
is 100 mills I expect it will sag
Linuxcnc supports subroutines with a different syntax
http://linuxcnc.org/docs/html/gcode/o-code.html
Dave Caroline
On 26/07/2015, John Thornton j...@gnipsel.com wrote:
Just because code is available in other controls doesn't automagicly
mean it is included in LinuxCNC. That is an unrealistic
Instead of that
M98 P1000 L9
use
O1000 CALL
to execute the subroutine once.
If you want to execute it more than once, use a loop (REPEAT, WHILE ..
ENDWHILE, or DO ... WHILE)
You should also define the subroutines before the main program.
So your program could be:
O1000 SUB
G0Z2.34
G1x-5
It don't seem that LinuxCNC supports M98 and M99 for repetitive tasks..
like cutting slots with a specific distance..
For example..
G91 G21
F30
G1x-4.12
G0x5
M98 P1000 L9
G0x2
G90
G0Z50
M30
o1000
G0Z2.34
G1x-5
G0x5
M99
%
(this would work in Mach3, for making several grooves on a cnc lathe).
On 26 July 2015 at 12:29, Andreas Pettersson andr...@roughedge.se wrote:
It don't seem that LinuxCNC supports M98 and M99 for repetitive tasks..
like cutting slots with a specific distance..
M98 P1000 L9
I am not 100% certain what that does, but I think you can have the
same effect with
O200
On 07/26/2015 02:51 AM, Gene Heskett wrote:
Jon;
I have some wall warts for a defunct portable phone charger base that
measures, no load, 13.1 volts. I am considering using one of them for
the 12 volts your pwm servo amp needs.
This is not enough overvoltage to make a 7812 work, and if the
This is the solution.. Just needed to change the output to a diff.
syntax model. It does basicly the same thing so. =)
Thanks.
// A
Den 2015-07-26 kl. 14:55, skrev Dave Caroline:
Linuxcnc supports subroutines with a different syntax
http://linuxcnc.org/docs/html/gcode/o-code.html
Dave
Just because code is available in other controls doesn't automagicly
mean it is included in LinuxCNC. That is an unrealistic expectation...
On 7/26/2015 6:29 AM, Andreas Pettersson wrote:
It don't seem that LinuxCNC supports M98 and M99 for repetitive tasks..
like cutting slots with a specific
On 07/26/2015 04:29 AM, Andreas Pettersson wrote:
It don't seem that LinuxCNC supports M98 and M99 for repetitive tasks..
like cutting slots with a specific distance..
I haven't looked at how it is done but it looks like Tormach's version
has M98, M99
http://www.tormach.com/m98.html
On Sunday 26 July 2015 12:30:42 Jon Elson wrote:
On 07/26/2015 02:51 AM, Gene Heskett wrote:
Jon;
I have some wall warts for a defunct portable phone charger base
that measures, no load, 13.1 volts. I am considering using one of
them for the 12 volts your pwm servo amp needs.
This
On 26 July 2015 at 17:01, Kirk Wallace kwall...@wallacecompany.com wrote:
I haven't looked at how it is done but it looks like Tormach's version
has M98, M99
Tormach docs might still be referring to Mach3?
--
atp
If you can't fix it, you don't own it.
http://www.ifixit.com/Manifesto
On 07/26/2015 09:18 AM, andy pugh wrote:
On 26 July 2015 at 17:01, Kirk Wallace kwall...@wallacecompany.com wrote:
I haven't looked at how it is done but it looks like Tormach's version
has M98, M99
Tormach docs might still be referring to Mach3?
Oops, for PathPilot it is Issue 824 and is
12 matches
Mail list logo