Thanks to all,
now that I think to, on my other machine the driver enable is left
unconnected, so I think I will leave them unconnected.
Valerio
On Tue, 2017-04-11 at 11:53 -0700, Peter C. Wallace wrote:
> On Tue, 11 Apr 2017, Valerio Bellizzomi wrote:
>
> > Date: Tue, 11 Apr 2017 20:25:04
On 04/11/2017 11:17 AM, Dave Cole wrote:
>
> Kirk,
>
> Go online and get your refrigerant license.
> I did that years ago and I think it was $35 or so and it makes you legit
> so you can buy parts and stuff from local HVAC houses.
I think this is an excellent idea.
The retired HVAC guy that
On 04/12/2017 08:58 AM, Kirk Wallace wrote:
> On 04/11/2017 11:17 AM, Dave Cole wrote:
>> Kirk,
>>
>> Go online and get your refrigerant license.
>> I did that years ago and I think it was $35 or so and it makes you legit
>> so you can buy parts and stuff from local HVAC houses.
Yes, the EPA
Hi Valerio,
Peter suggest obviusly is right,but in our laws (CE) if there is you must use
the enable pin in the safety chain obviously if the machine is for you and
only you can do as you please. I know it's something to be pedantic people ...
but I think it is correct inform you since
Ciao Giorgio,
my other machine was actually sold to me without the enable pin in the
safety chain.
On Wed, 2017-04-12 at 16:19 +, giorgio foga wrote:
> Hi Valerio,
>
>
>
> Peter suggest obviusly is right,but in our laws (CE) if there is you must use
> the enable pin in the safety
Greetings all;
Looking for ideas I could snarf, I went to the wiki and while the wiki is
a decade old, all its links to pastebin have expired. Pointing out the
futility of using pastebin for long term storage.
If whoever did those original wiki entries, and use pastebin links for
the
Greetings all;
Up until late this afternoon I'd not had the ability to measure the OD of
the bronze bushings carrying the counter shaft's, either one, in the
spindle drive.
So today I tried to pull them, but did not get very far with the first
attempt. Seemed to have come up solid against
On Wednesday 12 April 2017 19:42:09 Gene Heskett wrote:
> Greetings all;
>
> Up until late this afternoon I'd not had the ability to measure the OD
> of the bronze bushings carrying the counter shaft's, either one, in
> the spindle drive.
>
> So today I tried to pull them, but did not get very
I have an application where I have a device that will put out a sine wave
and get an associated step/dir. USDigital used to have something called an
"EPOT" but they got rid of it for some reason. I could do this with an
Arduino, but I'd rather not. Any other suggestions?
Thanks,
Eric
If you upload a file to the wiki it is there till rapture...
JT
On 4/12/2017 11:40 AM, Gene Heskett wrote:
> Greetings all;
>
> Looking for ideas I could snarf, I went to the wiki and while the wiki is
> a decade old, all its links to pastebin have expired. Pointing out the
> futility of using
10 matches
Mail list logo