On 6/1/2014 12:39 PM, John Alexander Stewart wrote:
> Hate to say this, but I had 3 Starrett blades that would NOT stay on my
> cutoff bandsaw. Real frustrating having a bandsaw that took longer to keep
> putting blades back on than it did to cut material.
>
> Changed blade for a "top of the line"
Hi
i did change to emc2 2.5 finished tuning and back to feed control.
the direction
/
1) Make sure that there is a spare encoder counter, find the relevant
line in the HAL file and change it:
loadrt hm2_pci config="num_encoders=4.."
2
On 06/01/2014 04:54 PM, toolznglue wrote:
> Where would one find these alternate interfaces for EMC? I’m running a
> Sherline mill using EMC 8.something and Hardy Heron on a Sony PCG-F430
> computer with 256 megabytes of memory. So far, it’s been running great using
> the Axis interface. Has any
On 1 June 2014 23:54, andy pugh wrote:
> If you have a HOMING_SEQUENCE entry for every axis in the INI file a
> "home all" button will appear.
Sorry, I misremembered: HOME_SEQUENCE
http://www.linuxcnc.org/docs/html/config/ini_config.html#sub:AXIS-section
--
atp
If you can't fix it, you don't
On 1 June 2014 22:54, toolznglue wrote:
> Where would one find these alternate interfaces for EMC?
You just need to change the entry in the INI file to choose a
different interface.
> Has anyone modified the Axis interface to have a “home all” button for the
> manual mode? I
If you have a HOMI
Where would one find these alternate interfaces for EMC? I’m running a Sherline
mill using EMC 8.something and Hardy Heron on a Sony PCG-F430 computer with 256
megabytes of memory. So far, it’s been running great using the Axis interface.
Has anyone modified the Axis interface to have a “home al
On 06/01/2014 11:39 AM, John Alexander Stewart wrote:
> Hate to say this, but I had 3 Starrett blades that would NOT stay on my
> cutoff bandsaw. Real frustrating having a bandsaw that took longer to keep
> putting blades back on than it did to cut material.
Oops, I guess I'll find out if the blad
why do i need complicated windows product ---install the stand alone
desktop - skype -- when i can get much better simple to use
videoconferencing with gmail.com ?
windows lost ground almost every way--
On Sun, Jun 1, 2014 at 3:06 AM, Marius Liebenberg
wrote:
> You can install the stand alo
Hate to say this, but I had 3 Starrett blades that would NOT stay on my
cutoff bandsaw. Real frustrating having a bandsaw that took longer to keep
putting blades back on than it did to cut material.
Changed blade for a "top of the line" blade from importer busybeetools.com,
and it's been perfect s
On 05/31/2014 09:55 AM, Kirk Wallace wrote:
> I haven't bought bandsaw blades for many years so I don't have a known
> good source. Does anyone have a favorite source for 93" x .032" x 3/4"
> steel cutting blades?
>
Thanks for the replies Pete, Dave, and John. I'm going to give this
blade a try:
You can run most versions of linux without the overhead of the gui by
starting the system in run level 3. The gui usually starts in run level
5. You then have to figure out how to control LinuxCNC, maybe from a
remote computer (I think some users have done this).
Ray
--J. Ray Mitchell Jr.
jrmit
On 06/01/2014 07:33 AM, Leonardo Marsaglia wrote:
> I guess that should work. I really don't know about basic GUIs but is it
> possible for the keystick gui to run in the command line enviroment?
>
The original keystick was totally command-line, using
ncurses, I think,
for screen updates. You nee
Easy to run on older computer especially if they have metal cases.
Just wear appropriate footwear.
On 1 Jun 2014, at 11:57 pm, Allen wrote:
> On 14-05-31 05:01 PM, dave wrote:
>> Well, I really hate to admit it but my LCNC machines are running on a
>> 600 Mhz Seattleboard. It's been down for t
On Sat, 2014-05-31 at 13:02 -0400, Pete Matos wrote:
> Lennox blades are hard to beat. I run them in my horizontal vertical 12
> inch saw and it cuts beautiful and lasts awhile unless I screw up and get
> it stuck in some tube or something. I get them from my local welding
> supply house. they c
On 14-05-31 05:01 PM, dave wrote:
> Well, I really hate to admit it but my LCNC machines are running on a
> 600 Mhz Seattleboard. It's been down for two years now. Not the
> computer just the belleville stack for the tool clamp. Real bear to get
> at. ... I need to bribe someone. ;-)
>
> Other mac
I only know that some are using Xubuntu as a light weight desktop. I
assume Keystick still needs a desktop to display.
I show my complete ignorance about it in this thread.
http://linuxcnc.org/index.php/english/forum/9-installing-linuxcnc/27898-a-big-thanks-to-this-community#47502
I do plan on
2014-06-01 7:46 GMT-03:00 John Thornton :
> I assume you could install the minimal CD and pick a lighter weight
> desktop then add the real time kernel...
>
> https://help.ubuntu.com/community/Installation/MinimalCD
>
I guess that should work. I really don't know about basic GUIs but is it
possib
I assume you could install the minimal CD and pick a lighter weight
desktop then add the real time kernel...
https://help.ubuntu.com/community/Installation/MinimalCD
JT
On 6/1/2014 5:36 AM, Leonardo Marsaglia wrote:
> Could it be possible to use the server install of ubuntu 10.04 on an old
> pc
I think this is the other place I wanted to try a Starrett blade or two
http://www.bandsawbladesking.com
JT
On 5/31/2014 11:55 AM, Kirk Wallace wrote:
> I haven't bought bandsaw blades for many years so I don't have a known
> good source. Does anyone have a favorite source for 93" x .032" x 3/4"
opps
http://www.bandsawbladesdirect.com
JT
On 5/31/2014 11:55 AM, Kirk Wallace wrote:
> I haven't bought bandsaw blades for many years so I don't have a known
> good source. Does anyone have a favorite source for 93" x .032" x 3/4"
> steel cutting blades?
---
I use Lenox blades from bandsawdirect.com.
I have another place that escapes me at the moment that I want to try...
JT
On 5/31/2014 11:55 AM, Kirk Wallace wrote:
> I haven't bought bandsaw blades for many years so I don't have a known
> good source. Does anyone have a favorite source for 93" x .
Could it be possible to use the server install of ubuntu 10.04 on an old
pc? Because that way you only install the minimal components without the
GUI. I've done it before with 8.04 to have the minimum components loaded, I
used to load the GUI after that, but I think that an option would be to use
k
You can install the stand alone desktop version on any of the Windows
platforms. I dont use the Windows 8 integrated Skype. I installed the
desktop version and that works very well.
On 2014-05-31 23:54, a k wrote:
> yes i used skype on XP (i have XP) 2 month ago.
> after that it give error and s
23 matches
Mail list logo