On Monday 29 January 2018 00:33:03 Greg Bernard wrote:
> Good description, Gene. Have you ever considered makin' one of them
> new-fangled u-tube videos of your adventures?
>
Yes, but then I think better of it. My place doesn't have the real-
estate Kieth Rucker or Joe Pi has, its more like a
Just a quick note to say the ATS601 seems to work quite well on inital
testing. It can detect a small drilled hole in a shaft (think a full width
peck from a 1/8" drill) without much trouble. If you're sensing
something(s) that isn't a gear tooth and doesn't have to reject objects
that
Good description, Gene. Have you ever considered makin' one of them
new-fangled u-tube videos of your adventures?
On Sun, Jan 28, 2018 at 10:49 PM, Gene Heskett wrote:
> On Sunday 28 January 2018 12:39:48 Jon Elson wrote:
>
> > On 01/28/2018 01:36 AM, Marcus Bowman wrote:
On Sunday 28 January 2018 12:39:48 Jon Elson wrote:
> On 01/28/2018 01:36 AM, Marcus Bowman wrote:
> > I have a TOS 4 jaw self-centring chuck for my mill (lives on a
> > plate, and faces upwards, for use holding cylindrical stock facing
> > upwards. That's Polish,
>
> Actually, TOS is Czech, but
On Sunday 28 January 2018 10:28:38 Nicklas Karlsson wrote:
> On Thu, 25 Jan 2018 20:07:23 -0800
>
> Chris Albertson wrote:
> > webrtc is spec's for about 1 second round trip time. This would be
> > hugely annoying to use. Unacceptable lag. ...
>
> Yes without
On Sunday 28 January 2018 08:25:49 John Alexander Stewart wrote:
> Thanks David and Gene;
>
> Thanks for the responses.
>
> 1) The stiffness of mounting is one that I had not really thought much
> about but makes sense.
> 2) a higher tooth count gear is something I'll look at this AM. Have
>
On Thu, 25 Jan 2018 20:07:23 -0800
Chris Albertson wrote:
> webrtc is spec's for about 1 second round trip time. This would be hugely
> annoying to use. Unacceptable lag. ...
Yes without doubt, it would be acceptable reading a manual but not writing text
and
On Sunday 28 January 2018 02:36:52 Marcus Bowman wrote:
> On 28 Jan 2018, at 07:00, Gene Heskett wrote:
> > On Saturday 27 January 2018 22:03:33 Eric Keller wrote:
> >> Bison maybe? Currently considered to be pretty good, and priced
> >> accordingly.
> >
> > So I've noted already.
> >
> > All
Thanks David and Gene;
Thanks for the responses.
1) The stiffness of mounting is one that I had not really thought much
about but makes sense.
2) a higher tooth count gear is something I'll look at this AM. Have lots
of old gears kicking about - and, the idea of adding a bit of steel gooped
to