Re: [Emc-users] class RCS_CMD_CHANNEL

2018-10-08 Thread Jeff Epler 
Refer to our testsuite for a simple standalone "UI" program which is
tested to correctly link in every build of LinuxCNC.

https://github.com/LinuxCNC/linuxcnc/blob/master/tests/build/ui/nml-position-logger.cc

Removing the inclusion of "emc_nml.hh" causes errors similar to the ones
you encountered.  This header probably indirectly includes the one that
Seb mentioned in a sibling reply.

Jeff


___
Emc-users mailing list
Emc-users@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/emc-users

Re: [Emc-users] Vacuum table Re: Yet another topic about gantry homing

2018-10-08 Thread Dave Cole 
Instead of making bearings I would look at what Igus and others have to 
sell.

They are not that expensive and you have plenty of other things to do.
Regenerative Vacuum blowers work well for vacuum hold down work.    They 
are still power hogs and quite noisy without mufflers on the outputs.
They are sometimes sold on Ebay for not much since few people know what 
they are.


Dave



On 10/7/2018 6:31 PM, Leonardo Marsaglia wrote:

Hello Gregg,

Something like this is what you have in mind?

http://www.phoenixcnccreations.com/our_shop_gallery/Vacuum%20System/2%20vac%206%20zone%20plenum_ball%20valves4.jpg

It's a nice feature, and seems cheap and not hard to implement. That's
probably the way I'll do it.

El sáb., 6 oct. 2018 a las 18:07, Gregg Eshelman via Emc-users (<
emc-users@lists.sourceforge.net>) escribió:


You could make the vacuum table with several zones, connected with a PVC
pipe manifold and ball valves to close off sections you're not using. That
would be easier than keeping stuff around to lay over unused sections of
the table.

___
Emc-users mailing list
Emc-users@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/emc-users


___
Emc-users mailing list
Emc-users@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/emc-users



___
Emc-users mailing list
Emc-users@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/emc-users

Re: [Emc-users] new linuxcnc today, wants to rerun update_ini again

2018-10-08 Thread Gene Heskett 
On Monday 08 October 2018 17:38:08 andy pugh wrote:

> On Sun, 7 Oct 2018 at 22:41, Rene Hopf via Emc-users
>
>  wrote:
> > the spindle-at-speed pin is affected.
> > https://github.com/LinuxCNC/linuxcnc/issues/504
> > 
>
> Fixed, I think

We should be able to pull this tomorrow then?

-- 
Cheers, Gene Heskett
--
"There are four boxes to be used in defense of liberty:
 soap, ballot, jury, and ammo. Please use in that order."
-Ed Howdershelt (Author)
Genes Web page 


___
Emc-users mailing list
Emc-users@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/emc-users

Re: [Emc-users] OT: led laser collimating

2018-10-08 Thread Gregg Eshelman via Emc-users 
Be careful with the DPSS type of green lasers. They can put out powerful 
infrared along with the 
green.https://www.skyandtelescope.com/astronomy-news/observing-news/green-lasers-a-hidden-danger/
 

On Monday, October 8, 2018, 8:48:20 AM MDT, Roland Jollivet 
 wrote:  
 
 Has anyone here definitively worked on one of those chinese green LED
lasers, 1W - - - 10W

I'm wondering on the practicality of collimating the beam to a ~ 0.2mm spot
using a dual lens. For surface marking.
I know the emission is asymmetrical, but you can work on the major axis and
then mask the rest.  
___
Emc-users mailing list
Emc-users@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/emc-users

Re: [Emc-users] new linuxcnc today, wants to rerun update_ini again

2018-10-08 Thread andy pugh 
On Sun, 7 Oct 2018 at 22:41, Rene Hopf via Emc-users
 wrote:

> the spindle-at-speed pin is affected. 
> https://github.com/LinuxCNC/linuxcnc/issues/504 
> 

Fixed, I think

-- 
atp
"A motorcycle is a bicycle with a pandemonium attachment and is
designed for the especial use of mechanical geniuses, daredevils and
lunatics."
— George Fitch, Atlanta Constitution Newspaper, 1916


___
Emc-users mailing list
Emc-users@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/emc-users

Re: [Emc-users] need ebay phone number, javascript won't give it to me

2018-10-08 Thread Gene Heskett 
On Monday 08 October 2018 16:08:56 Chris Albertson wrote:

> Is this an iPhone, Windows 10 or Linux running on a Pi3?   Sarari,
> Edge, Chrome or Firefox?
>
firefox, 52ish, running on wheezy.

> Re-installation of the web browser is usually the best way to get back
> to a standard configuration.
>
> If you don't want to do that install a DIFFERENT browser and it will
> work. If you are using Chrome, get Firefox. and leave your Chrome
> installation the way you like it.

The other browsers don't have the auto-login setup.

I did find one javascript function disabled, so I enabled it and was then 
able to put in the new cc nums, and got 2 of them bought. But at an exra 
30 usd for expedited delivery from west chengzou china, I'll probably be 
up to my butt in snowballs by the time 2 of them actually arrive.  My 
putzing around getting the 12 ga connectors off it, fixed it.  How long? 
DamnifIknow.  But I'll leave the line cord accessable so I can pull it 
if I hear nothing but the compressor running.

But ATM I've put it back together, and am watching the neighborhood for a 
stronger back than mine to help me stick it back in the window hole. I 
got it down onto a wagon coming out, but theres no way I can pick it up 
and stuff it back where it goes, 2 crushed disks have put a stop to 98% 
of my heavy lifting. Even R ing the 8" 4 jaw on the Sheldon is a bit 
much.

That guy that used to pick up 150 lbs in each hand and walk across town 
with them? He doesn't live HERE anymore.

> On Mon, Oct 8, 2018 at 10:45 AM Gene Heskett  
wrote:
> > I'm trying to buy a relay for the garage AC, a SANYOU SFK 112DM, and
> > with javascript turned off, I can't access the contact phone number,
> > nor can I access the button to put me thru to the enter new card
> > pages.
> >
> > And I have no clue where in about:config to re-enable that security
> > hell hole.
> >
> > So I need to contact them directly.
> > --
> > Cheers, Gene Heskett
> > --
> > "There are four boxes to be used in defense of liberty:
> >  soap, ballot, jury, and ammo. Please use in that order."
> > -Ed Howdershelt (Author)
> > Genes Web page 
> >
> >
> > ___
> > Emc-users mailing list
> > Emc-users@lists.sourceforge.net
> > https://lists.sourceforge.net/lists/listinfo/emc-users



-- 
Cheers, Gene Heskett
--
"There are four boxes to be used in defense of liberty:
 soap, ballot, jury, and ammo. Please use in that order."
-Ed Howdershelt (Author)
Genes Web page 


___
Emc-users mailing list
Emc-users@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/emc-users

Re: [Emc-users] need ebay phone number, javascript won't give it to me

2018-10-08 Thread Chris Albertson 
Is this an iPhone, Windows 10 or Linux running on a Pi3?   Sarari, Edge,
Chrome or Firefox?

Re-installation of the web browser is usually the best way to get back to a
standard configuration.

If you don't want to do that install a DIFFERENT browser and it will work.
  If you are using Chrome, get Firefox. and leave your Chrome installation
the way you like it.

On Mon, Oct 8, 2018 at 10:45 AM Gene Heskett  wrote:

> I'm trying to buy a relay for the garage AC, a SANYOU SFK 112DM, and with
> javascript turned off, I can't access the contact phone number, nor can
> I access the button to put me thru to the enter new card pages.
>
> And I have no clue where in about:config to re-enable that security hell
> hole.
>
> So I need to contact them directly.
> --
> Cheers, Gene Heskett
> --
> "There are four boxes to be used in defense of liberty:
>  soap, ballot, jury, and ammo. Please use in that order."
> -Ed Howdershelt (Author)
> Genes Web page 
>
>
> ___
> Emc-users mailing list
> Emc-users@lists.sourceforge.net
> https://lists.sourceforge.net/lists/listinfo/emc-users
>


-- 

Chris Albertson
Redondo Beach, California

___
Emc-users mailing list
Emc-users@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/emc-users

Re: [Emc-users] class RCS_CMD_CHANNEL

2018-10-08 Thread Sebastian Kuzminsky 
On Mon, Oct 8, 2018 at 8:54 AM theman whosoldtheworld
 wrote:
>
> Where are located definition of class RCS_CMD_CHANNEL ??

It's in src/libnml/nml/cmd_msg.hh

cscope is really good at answering questions like this.


-- 
Sebastian Kuzminsky


___
Emc-users mailing list
Emc-users@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/emc-users

[Emc-users] need ebay phone number, javascript won't give it to me

2018-10-08 Thread Gene Heskett 
I'm trying to buy a relay for the garage AC, a SANYOU SFK 112DM, and with 
javascript turned off, I can't access the contact phone number, nor can 
I access the button to put me thru to the enter new card pages.

And I have no clue where in about:config to re-enable that security hell 
hole.

So I need to contact them directly. 
-- 
Cheers, Gene Heskett
--
"There are four boxes to be used in defense of liberty:
 soap, ballot, jury, and ammo. Please use in that order."
-Ed Howdershelt (Author)
Genes Web page 


___
Emc-users mailing list
Emc-users@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/emc-users

Re: [Emc-users] QtDro Qt5 c++ upgrade/study need help for two error

2018-10-08 Thread theman whosoldtheworld 
mmm ... actually after the upper modification to my code I obtain these
error (not building error but compile error)

*reference not defined to: (these the error ... repeat for every call
below)*

"set_rcs_print_destination"
"emcGetArgs"
"set_print_rcs_error_info"
"print_rcs_error_new"
"emc_inifile"
"IniFile::Open(char const*)"
"set_print_rcs_error_info"
"IniFile::Find(char const*, char const*, int, int*)"
"emc_nmlfile"
"NML::operator new(unsigned long)"
"emcFormat(int, void*, CMS*)"
"emcFormat (int, void *, CMS *)"
"RCS_CMD_CHANNEL::RCS_CMD_CHANNEL(int (*)(int, void*, CMS*), char const*,
char const*, char const*, int)"

"IniFile::IniFile(int, _IO_FILE*)"
"NML::get_address()"
"IniFile::Close()"

this is my test file ... only for study pourpouse ... so actually signal
and slot is not connected ...

https://drive.google.com/open?id=1-GMmWgDZ5iuzg_tPnKhYxVj9XX7kfadS

Il giorno lun 8 ott 2018 alle ore 17:54 theman whosoldtheworld <
bleachk...@gmail.com> ha scritto:

> OK  addind this insclude statement I get no error about messaging ...
>
> #include "include/cmd_msg.hh"
> #include "include/stat_msg.hh"
>
> but the right call was:
>
> emcCommandBuffer =  new RCS_CMD_CHANNEL(emcFormat, "emcCommand",
> "xemc",emc_nmlfile, 0); . because, as RCS_STAT_CHANNEL the class
> definition is:
>
> class RCS_STAT_CHANNEL:public NML {
>   public:
> RCS_STAT_CHANNEL(NML_FORMAT_PTR, const char *, const char *, const
> char *, int set_to_server = 0);
>  ~RCS_STAT_CHANNEL();
> RCS_STAT_MSG *get_address() {
> return ((RCS_STAT_MSG *) NML::get_address());
> };
> };
> regards
> bkt
>
>
>
>
>
> Il giorno lun 8 ott 2018 alle ore 12:59 theman whosoldtheworld <
> bleachk...@gmail.com> ha scritto:
>
>> -2- EMC_NMLFILE is not declared in this scope ... is not recognized as
>> "EMC_NMLFILE"  but as "emc_nmlfile"  just see  now I search for
>> the reason in Lcnc folder
>>
>> regards
>> bkt
>>
>> Il giorno mer 3 ott 2018 alle ore 11:12 theman whosoldtheworld <
>> bleachk...@gmail.com> ha scritto:
>>
>>> I know these and the file seems to locate in
>>> home/mypc/linuxcnc-dev/src/emc/nml_intf/emccfg.h  these path is in my
>>> .pro file with macro INCLUDEPATH += home/mypc/linuxcnc-dev/src/emc/nml_intf
>>> similar to other . buth these is an error from the system so :
>>>
>>> -2- EMC_NMLFILE is not declared in this scope ... why? this question is
>>> still valid 
>>>
>>> for Inifile ... not understand very well  in teory emc.hh  but
>>> not know how Inifile inifile; is signed as an error   is because Lcnc
>>> not run?
>>>
>>> thanks for any suggest
>>>
>>> bkt
>>>
>>> Il giorno mar 2 ott 2018 alle ore 20:23 Przemek Klosowski <
>>> przemek.klosow...@gmail.com> ha scritto:
>>>
 On Tue, Oct 2, 2018 at 12:30 PM theman whosoldtheworld
  wrote:
 >
 > I'm trying to study QtDro and upgrade to the new QT5.11 both in the
 > linking library version
 > and in the included library version.
 >
 > Unfortunately I run into two errors that I can not understand:
 >
 > -1- Inifile inifile; -> inifile is not declared in these scope ...
 why?
 > -2- EMC_NMLFILE is not declared in this scope ... why?

 I am not familiar with this software, but just on general principle,
 you are missing the definitions of the type/class Infiile and the
 defined symbol EMC_NMLFILE.
 what I'd do is find where they are---e.g.
 grep -r EMC_NMLFILE ~
 Hopefully this will find the files that define them, and then you'll
 just add them to the compile options. Not LIBS though---it probably
 should be something like INCLUDES or some such.

 >
 > in my .pro file I add the right
 > LIBS += home/mypc/linuxcnc-dev/include
 > LIBS += home/mypc/linuxcnc-dev/src
 > LIBS += home/mypc/linuxcnc-dev/lib ... etc etc
 >
 > so the library and class added in #incluse become from righ path
 >
 >  ...
 >
 >
 >
 > thanks for every suggest
 > bkt
 >
 >
 > https://drive.google.com/open?id=1c6NW9mQN2ypxXtPiCujofYd6zO2SUpnm
 > https://drive.google.com/open?id=1pvjWwnKTr2xjkY8OTMTlUUkBJsczP2QH
 >
 > ___
 > Emc-users mailing list
 > Emc-users@lists.sourceforge.net
 > https://lists.sourceforge.net/lists/listinfo/emc-users


 ___
 Emc-users mailing list
 Emc-users@lists.sourceforge.net
 https://lists.sourceforge.net/lists/listinfo/emc-users

>>>

___
Emc-users mailing list
Emc-users@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/emc-users

Re: [Emc-users] QtDro Qt5 c++ upgrade/study need help for two error

2018-10-08 Thread theman whosoldtheworld 
OK  addind this insclude statement I get no error about messaging ...

#include "include/cmd_msg.hh"
#include "include/stat_msg.hh"

but the right call was:

emcCommandBuffer =  new RCS_CMD_CHANNEL(emcFormat, "emcCommand", "xemc",
emc_nmlfile, 0); . because, as RCS_STAT_CHANNEL the class definition is:

class RCS_STAT_CHANNEL:public NML {
  public:
RCS_STAT_CHANNEL(NML_FORMAT_PTR, const char *, const char *, const char
*, int set_to_server = 0);
 ~RCS_STAT_CHANNEL();
RCS_STAT_MSG *get_address() {
return ((RCS_STAT_MSG *) NML::get_address());
};
};
regards
bkt





Il giorno lun 8 ott 2018 alle ore 12:59 theman whosoldtheworld <
bleachk...@gmail.com> ha scritto:

> -2- EMC_NMLFILE is not declared in this scope ... is not recognized as
> "EMC_NMLFILE"  but as "emc_nmlfile"  just see  now I search for
> the reason in Lcnc folder
>
> regards
> bkt
>
> Il giorno mer 3 ott 2018 alle ore 11:12 theman whosoldtheworld <
> bleachk...@gmail.com> ha scritto:
>
>> I know these and the file seems to locate in
>> home/mypc/linuxcnc-dev/src/emc/nml_intf/emccfg.h  these path is in my
>> .pro file with macro INCLUDEPATH += home/mypc/linuxcnc-dev/src/emc/nml_intf
>> similar to other . buth these is an error from the system so :
>>
>> -2- EMC_NMLFILE is not declared in this scope ... why? this question is
>> still valid 
>>
>> for Inifile ... not understand very well  in teory emc.hh  but
>> not know how Inifile inifile; is signed as an error   is because Lcnc
>> not run?
>>
>> thanks for any suggest
>>
>> bkt
>>
>> Il giorno mar 2 ott 2018 alle ore 20:23 Przemek Klosowski <
>> przemek.klosow...@gmail.com> ha scritto:
>>
>>> On Tue, Oct 2, 2018 at 12:30 PM theman whosoldtheworld
>>>  wrote:
>>> >
>>> > I'm trying to study QtDro and upgrade to the new QT5.11 both in the
>>> > linking library version
>>> > and in the included library version.
>>> >
>>> > Unfortunately I run into two errors that I can not understand:
>>> >
>>> > -1- Inifile inifile; -> inifile is not declared in these scope ... why?
>>> > -2- EMC_NMLFILE is not declared in this scope ... why?
>>>
>>> I am not familiar with this software, but just on general principle,
>>> you are missing the definitions of the type/class Infiile and the
>>> defined symbol EMC_NMLFILE.
>>> what I'd do is find where they are---e.g.
>>> grep -r EMC_NMLFILE ~
>>> Hopefully this will find the files that define them, and then you'll
>>> just add them to the compile options. Not LIBS though---it probably
>>> should be something like INCLUDES or some such.
>>>
>>> >
>>> > in my .pro file I add the right
>>> > LIBS += home/mypc/linuxcnc-dev/include
>>> > LIBS += home/mypc/linuxcnc-dev/src
>>> > LIBS += home/mypc/linuxcnc-dev/lib ... etc etc
>>> >
>>> > so the library and class added in #incluse become from righ path
>>> >
>>> >  ...
>>> >
>>> >
>>> >
>>> > thanks for every suggest
>>> > bkt
>>> >
>>> >
>>> > https://drive.google.com/open?id=1c6NW9mQN2ypxXtPiCujofYd6zO2SUpnm
>>> > https://drive.google.com/open?id=1pvjWwnKTr2xjkY8OTMTlUUkBJsczP2QH
>>> >
>>> > ___
>>> > Emc-users mailing list
>>> > Emc-users@lists.sourceforge.net
>>> > https://lists.sourceforge.net/lists/listinfo/emc-users
>>>
>>>
>>> ___
>>> Emc-users mailing list
>>> Emc-users@lists.sourceforge.net
>>> https://lists.sourceforge.net/lists/listinfo/emc-users
>>>
>>

___
Emc-users mailing list
Emc-users@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/emc-users

[Emc-users] class RCS_CMD_CHANNEL

2018-10-08 Thread theman whosoldtheworld 
Where are located definition of class RCS_CMD_CHANNEL ??

I try to use it on my c++ program but everytime compare the warning:

warning: ‘emcCommandBuffer’ has incomplete type static RCS_CMD_CHANNEL
*emcCommandBuffer = 0;

and than some error such as:

error: invalid use of incomplete type ‘class RCS_STAT_CHANNEL’
emcStatusBuffer = new RCS_STAT_CHANNEL(emcFormat, "emcStatus", "xemc",
emc_nmlfile);

I think become from nml.hh but never see the class definition.

regards
bkt

___
Emc-users mailing list
Emc-users@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/emc-users

[Emc-users] OT: led laser collimating

2018-10-08 Thread Roland Jollivet 
Has anyone here definitively worked on one of those chinese green LED
lasers, 1W - - - 10W

I'm wondering on the practicality of collimating the beam to a ~ 0.2mm spot
using a dual lens. For surface marking.
I know the emission is asymmetrical, but you can work on the major axis and
then mask the rest.

Roland

___
Emc-users mailing list
Emc-users@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/emc-users

Re: [Emc-users] using Screw Comp file are values interpolated question

2018-10-08 Thread Gene Heskett 
On Tuesday 02 October 2018 19:24:50 robert - Innovative-RC wrote:

> Does any one know if the points inbetween nominal values are
> interpolated or not in a screw comp table?
>
> ie if i have 10mm nominal and 20mm nominal with correction values.
> would say 15mm travel become an interpolated value for screw comp?

IIRC yes. The file method is intended to improve the accuracy of screws, 
and not normally needed with ballscrews and  ballnuts. lincurve, the 
loadable module does this also, but can be cross coupled to do an x 
correction according to z position. but needs an offset module to hide 
the difference from LCNC.

Otherwise the correction is seen as a following error so the offset 
module puts the correction in going to the motor, and takes it back out 
of the motors feedback.

This is how I am improving the turning accuracy of a 70 yo Sheldon 11x36 
that has some bed wear just in front of the spindle. I took readings 
every 1/4" and made a curve out of that for a first approximation by 
mounting a .0001 dial to the toolpost, bringing the tailstock up and 
putting the dials finger on its barrel, then took a reading as I used 
the carriage to push the loose tailstock down the bed, the theory being 
that since it rides a different vway on the rear of the bed it s/b 
straighter. This then was cherry picked for high points in the deviation 
and applied to the lincurve modules set points.  So now its only about 2 
thou out, where it was nearly 10 thou out at the start. Now I have a 
laser setup to fine tune that under construction.  The laser itself s/b 
done today, but the camera and some python code are yet to be built.

My AC in the garage has died, so that, if I can get it out of the window 
and onto a worktable, I'm 84 with a bad back, may occupy me today.  Its 
already 77F at 10 am local, and forecast to be a record breaker today.

Something in the control panel has died, and it even runs intermittently 
when turned off, but doesn't cool. All the rain and humidity from 
Florence froze it up into a solid block of ice a month ago, so I expect 
I'll find a bad transistor or a failed capacitor in the control board.  
I am a C.E.T. so if I can get my rusty thinker working again, I s/b able 
to fix it.  No help from Frigidaire of course, its 6 or 8 years old. And 
this time of the year, all the window units have been sold off at fire 
sale prices already to make room for Christmas stuff. Gr.

> i had a look in motion.c , control.c and command.c
>
> but i was unable to decide for my self maybe someone thats more able
> to read and understand the code can tell me for sure.
>
> i did see a slope value get worked out in command.c
>
> /* calculate slopes from previous entry to the new one */
>
>
> thanks, rob
>
I hope my rambling is of some help.

-- 
Cheers, Gene Heskett
--
"There are four boxes to be used in defense of liberty:
 soap, ballot, jury, and ammo. Please use in that order."
-Ed Howdershelt (Author)
Genes Web page 


___
Emc-users mailing list
Emc-users@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/emc-users

Re: [Emc-users] QtDro Qt5 c++ upgrade/study need help for two error

2018-10-08 Thread theman whosoldtheworld 
-2- EMC_NMLFILE is not declared in this scope ... is not recognized as
"EMC_NMLFILE"  but as "emc_nmlfile"  just see  now I search for
the reason in Lcnc folder

regards
bkt

Il giorno mer 3 ott 2018 alle ore 11:12 theman whosoldtheworld <
bleachk...@gmail.com> ha scritto:

> I know these and the file seems to locate in
> home/mypc/linuxcnc-dev/src/emc/nml_intf/emccfg.h  these path is in my
> .pro file with macro INCLUDEPATH += home/mypc/linuxcnc-dev/src/emc/nml_intf
> similar to other . buth these is an error from the system so :
>
> -2- EMC_NMLFILE is not declared in this scope ... why? this question is
> still valid 
>
> for Inifile ... not understand very well  in teory emc.hh  but not
> know how Inifile inifile; is signed as an error   is because Lcnc not
> run?
>
> thanks for any suggest
>
> bkt
>
> Il giorno mar 2 ott 2018 alle ore 20:23 Przemek Klosowski <
> przemek.klosow...@gmail.com> ha scritto:
>
>> On Tue, Oct 2, 2018 at 12:30 PM theman whosoldtheworld
>>  wrote:
>> >
>> > I'm trying to study QtDro and upgrade to the new QT5.11 both in the
>> > linking library version
>> > and in the included library version.
>> >
>> > Unfortunately I run into two errors that I can not understand:
>> >
>> > -1- Inifile inifile; -> inifile is not declared in these scope ... why?
>> > -2- EMC_NMLFILE is not declared in this scope ... why?
>>
>> I am not familiar with this software, but just on general principle,
>> you are missing the definitions of the type/class Infiile and the
>> defined symbol EMC_NMLFILE.
>> what I'd do is find where they are---e.g.
>> grep -r EMC_NMLFILE ~
>> Hopefully this will find the files that define them, and then you'll
>> just add them to the compile options. Not LIBS though---it probably
>> should be something like INCLUDES or some such.
>>
>> >
>> > in my .pro file I add the right
>> > LIBS += home/mypc/linuxcnc-dev/include
>> > LIBS += home/mypc/linuxcnc-dev/src
>> > LIBS += home/mypc/linuxcnc-dev/lib ... etc etc
>> >
>> > so the library and class added in #incluse become from righ path
>> >
>> >  ...
>> >
>> >
>> >
>> > thanks for every suggest
>> > bkt
>> >
>> >
>> > https://drive.google.com/open?id=1c6NW9mQN2ypxXtPiCujofYd6zO2SUpnm
>> > https://drive.google.com/open?id=1pvjWwnKTr2xjkY8OTMTlUUkBJsczP2QH
>> >
>> > ___
>> > Emc-users mailing list
>> > Emc-users@lists.sourceforge.net
>> > https://lists.sourceforge.net/lists/listinfo/emc-users
>>
>>
>> ___
>> Emc-users mailing list
>> Emc-users@lists.sourceforge.net
>> https://lists.sourceforge.net/lists/listinfo/emc-users
>>
>

___
Emc-users mailing list
Emc-users@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/emc-users