Greetings all;
Working on my gcode to make it run better on this new machine, as part of
the init code, I have a G10 L2 R0.0 to cancel anything left in
memory, then 5 or 6 lines later running in map G54, I have a G10 L2 P1
R-90.000 to rotate the whole pattern so the long side is aligned
https://www.dropbox.com/s/nkw590aq1koyiif/toolchange.mp4?dl=0
or this?
This is LinuxCNC on an Enshu running a tool change component I wrote. It
checks the tool change status when starting and recovers from all but one
positional error. The error is doesn't recover from is with the tool change
On Sat, Jan 5, 2019 at 6:33 AM andy pugh wrote:
> On Sat, 5 Jan 2019 at 08:43, nkp wrote:
> >
> > Are there any examples where the tool is prepared in advance?
>
> > like this
> >
> http://www.electronicsam.com/images/KandT/conversion/toolchangerspindle.JPG
>
> You mean other than that one?
>
On Sat, 5 Jan 2019 at 08:43, nkp wrote:
>
> Are there any examples where the tool is prepared in advance?
> like this
> http://www.electronicsam.com/images/KandT/conversion/toolchangerspindle.JPG
You mean other than that one?
--
atp
"A motorcycle is a bicycle with a pandemonium attachment
On Saturday 05 January 2019 03:42:43 nkp wrote:
> Are there any examples where the tool is prepared in advance?
>
> Machine : tool changer with swiveling arm.
>
> like this
> http://www.electronicsam.com/images/KandT/conversion/toolchangerspindl
>e.JPG (image taken from the forum)
>
Neat.
Are there any examples where the tool is prepared in advance?
Machine : tool changer with swiveling arm.
like this
http://www.electronicsam.com/images/KandT/conversion/toolchangerspindle.JPG
(image taken from the forum)
___
Emc-users mailing list
