direction without
any sound. The setting for HOME_SEARCH_VEL is 20 mm/sec and HOME_LATCH_VEL is
set at -1.0 mm/sec. The hal scope trace of the f-error signal shows an error of
0.06 mm and pid output saturated for very small time.
I am using 2.4.7 on ubuntu 10.04.
Kindly advise?
Thanks
Shabbir
What I did find however, was that 2 of the cards
recommended (SIIG and
Sun1188) would not work in input mode no matter what I
did.
I have used SIIG card and it works.
--
Doing More with Less: The Next Generation
Radek ch...@timeguy.com
Subject: Re: [Emc-users] Work Offsets became Zero
To: Enhanced Machine Controller (EMC) emc-users@lists.sourceforge.net
Date: Tuesday, September 20, 2011, 1:00 AM
On Mon, Sep 19, 2011 at 12:31:04PM
-0700, Shabbir Hussain wrote:
I am using EMC2 2.4.6 on Ubuntu 10.04 LTS
On Sep 19, 2011, at 13:31 , Shabbir
Hussain wrote:
I am using EMC2 2.4.6 on Ubuntu 10.04 LTS (from live
CD and updated). The problem appeared two to three times
during last 20 days. The problem is, work offset values
(saved in G54 using G10 L2 P1 X) became zero when I
powered up the machine
After you save the work offsets, how are you shutting down
your computer?
Most of the times the computer is shut down from menu (shut down), but some
times just power goes (load shedding in Pakistan). This also happened when I
set the offsets and restarted the computer myself? I have not
with 7I33
3. MOTENC-Lite PCI (7544)
Can I use MESA 7I33 with MESA 7I43-P?
Thanks in Advannce.
Sincerely,
Shabbir Hussain
--
___
Emc-users mailing list
Emc-users
and 7I33 OR 5I20 and 7I33 OR
MOTENC-LITE(7544)
To: Enhanced Machine Controller (EMC) emc-users@lists.sourceforge.net
Date: Sunday, March 29, 2009, 5:53 PM
Shabbir Hussain wrote:
I need to retrofit an old CNC Lathe machine with
SIEMENS Servo Motors. The servo drives accept +/- 10V as
velocity
Dear All,
I want to purchase 7i43-U-4-ROHS ans 7i33 from Mesanet. They quoted the price
but in order to pay from credit card they are asking to fax them the photocopy
from front and back of my credit card.
My question is :
1. Have anyone purchased these cards using credit card?
2. Will it be
Dear Rainer,
You should try again..., I personally found them helpful.
My concern was just about the security of my card information.
Regards,
--- On Wed, 6/10/09, Rainer Schmidt lemonn...@gmail.com wrote:
From: Rainer Schmidt lemonn...@gmail.com
Subject: Re: [Emc-users] Purchase of
Happy birthday, Stuart
Shabbir
--- On Fri, 6/12/09, Jon Elson el...@pico-systems.com wrote:
From: Jon Elson el...@pico-systems.com
Subject: Re: [Emc-users] emc.nbl
To: Enhanced Machine Controller (EMC) emc-users@lists.sourceforge.net
Date: Friday, June 12, 2009, 9:03 AM
Stuart Stevenson
for positioning.
Thanks
Shabbir Hussain
--- On Fri, 6/12/09, Eric H. Johnson ejohn...@camalytics.com wrote:
From: Eric H. Johnson ejohn...@camalytics.com
Subject: Re: [Emc-users] Subject: Re: Successive G0 moves
To: 'Enhanced Machine Controller (EMC)' emc-users@lists.sourceforge.net
Date: Friday, June
behaviour.
So G0 move should finally achieve the target position
not the linear path. That is why it must be used for
positioning.
Thanks
Shabbir Hussain
Would
G0Z10
G0X5Y8
Posiiton Z first and then x and y? I did not spend to much
thought
about this and find this thread potentially
) and drives are analog Mitsubishi.
Thanks
Shabbir Hussain
--
___
Emc-users mailing list
Emc-users@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/emc-users
13 matches
Mail list logo