. (Assuming I can figure out why my 12v is below ground instead of
above it, and fix it.)
- Original Message -
From: "John Thornton" <j...@gnipsel.com>
To: "Enhanced Machine Controller (EMC)" <emc-users@lists.sourceforge.net>
Sent: Friday, April 7, 2017 4:52:03
This should clear it up.
http://gnipsel.com/linuxcnc/configs/7i77.html
JT
On 4/7/2017 3:47 PM, Todd Zuercher wrote:
> I was going to start working on putting a tool touch probe on a machine with
> a Mesa 7i77 setup.
> (I was just going to try a wire clipped to the tool and a touch plate for a
I was going to start working on putting a tool touch probe on a machine with a
Mesa 7i77 setup.
(I was just going to try a wire clipped to the tool and a touch plate for a
start.)
I pulled out the multi-meter and started poking around to try to figure out
what exactly I wanted to do and
