Re: [Emc-users] Counterbore G code Generator
Where did you try and put mm? Change the preamble line to G21 ... for metric G code. I did fix a few things and 1.6.05 is the latest version. JT On 2/20/2014 3:02 PM, Marius Liebenberg wrote: John Does the metric units work. I tried with mm and MM but I get an error that says mill instance has no attribute 'units' On 2014-02-20 19:47, John Thornton wrote: I just uploaded 1.6.3 with some more content in the help file. JT On 2/20/2014 8:42 AM, Marius Liebenberg wrote: John did you update the version in the about box? I am still seeing 1.6.1. Now I dont know if I screwed up the extract. On 2014-02-20 16:24, John Thornton wrote: Ok, 1.6.2 is uploaded. Fixed the self induced error and added content to the help file. JT On 2/20/2014 7:59 AM, Marius Liebenberg wrote: Never mind I'll just use the Linux box. It work very well on that. Thanks John On 2014-02-20 15:49, Marius Liebenberg wrote: This one is on Windoze On 2014-02-20 15:44, John Thornton wrote: I'm on 10.04 and Python version is 2.6.5. Run from a terminal and let me know the error msg. Dunno if I can fix it or not... JT On 2/20/2014 7:32 AM, Marius Liebenberg wrote: Hi John I had to rebuild my laptop so now I am on Python 3.3 and there seem to be issues. What is the version that I should use rather? On 2014-02-20 14:59, John Thornton wrote: Hey Gene and anyone else, I added counterbore to my mill G code generator in version 1.6.0. http://gnipsel.com/files/g-code-generator/ Any feed back is appreciated. JT -- Managing the Performance of Cloud-Based Applications Take advantage of what the Cloud has to offer - Avoid Common Pitfalls. Read the Whitepaper. http://pubads.g.doubleclick.net/gampad/clk?id=121054471iu=/4140/ostg.clktrk ___ Emc-users mailing list Emc-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/emc-users -- Managing the Performance of Cloud-Based Applications Take advantage of what the Cloud has to offer - Avoid Common Pitfalls. Read the Whitepaper. http://pubads.g.doubleclick.net/gampad/clk?id=121054471iu=/4140/ostg.clktrk ___ Emc-users mailing list Emc-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/emc-users -- Managing the Performance of Cloud-Based Applications Take advantage of what the Cloud has to offer - Avoid Common Pitfalls. Read the Whitepaper. http://pubads.g.doubleclick.net/gampad/clk?id=121054471iu=/4140/ostg.clktrk ___ Emc-users mailing list Emc-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/emc-users -- Managing the Performance of Cloud-Based Applications Take advantage of what the Cloud has to offer - Avoid Common Pitfalls. Read the Whitepaper. http://pubads.g.doubleclick.net/gampad/clk?id=121054471iu=/4140/ostg.clktrk ___ Emc-users mailing list Emc-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/emc-users -- Managing the Performance of Cloud-Based Applications Take advantage of what the Cloud has to offer - Avoid Common Pitfalls. Read the Whitepaper. http://pubads.g.doubleclick.net/gampad/clk?id=121054471iu=/4140/ostg.clktrk ___ Emc-users mailing list Emc-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/emc-users
Re: [Emc-users] Counterbore G code Generator
I changed the units entry in the INI file. On 2014-02-21 15:15, John Thornton wrote: Where did you try and put mm? Change the preamble line to G21 ... for metric G code. I did fix a few things and 1.6.05 is the latest version. JT On 2/20/2014 3:02 PM, Marius Liebenberg wrote: John Does the metric units work. I tried with mm and MM but I get an error that says mill instance has no attribute 'units' On 2014-02-20 19:47, John Thornton wrote: I just uploaded 1.6.3 with some more content in the help file. JT On 2/20/2014 8:42 AM, Marius Liebenberg wrote: John did you update the version in the about box? I am still seeing 1.6.1. Now I dont know if I screwed up the extract. On 2014-02-20 16:24, John Thornton wrote: Ok, 1.6.2 is uploaded. Fixed the self induced error and added content to the help file. JT On 2/20/2014 7:59 AM, Marius Liebenberg wrote: Never mind I'll just use the Linux box. It work very well on that. Thanks John On 2014-02-20 15:49, Marius Liebenberg wrote: This one is on Windoze On 2014-02-20 15:44, John Thornton wrote: I'm on 10.04 and Python version is 2.6.5. Run from a terminal and let me know the error msg. Dunno if I can fix it or not... JT On 2/20/2014 7:32 AM, Marius Liebenberg wrote: Hi John I had to rebuild my laptop so now I am on Python 3.3 and there seem to be issues. What is the version that I should use rather? On 2014-02-20 14:59, John Thornton wrote: Hey Gene and anyone else, I added counterbore to my mill G code generator in version 1.6.0. http://gnipsel.com/files/g-code-generator/ Any feed back is appreciated. JT -- Managing the Performance of Cloud-Based Applications Take advantage of what the Cloud has to offer - Avoid Common Pitfalls. Read the Whitepaper. http://pubads.g.doubleclick.net/gampad/clk?id=121054471iu=/4140/ostg.clktrk ___ Emc-users mailing list Emc-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/emc-users -- Managing the Performance of Cloud-Based Applications Take advantage of what the Cloud has to offer - Avoid Common Pitfalls. Read the Whitepaper. http://pubads.g.doubleclick.net/gampad/clk?id=121054471iu=/4140/ostg.clktrk ___ Emc-users mailing list Emc-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/emc-users -- Managing the Performance of Cloud-Based Applications Take advantage of what the Cloud has to offer - Avoid Common Pitfalls. Read the Whitepaper. http://pubads.g.doubleclick.net/gampad/clk?id=121054471iu=/4140/ostg.clktrk ___ Emc-users mailing list Emc-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/emc-users -- Managing the Performance of Cloud-Based Applications Take advantage of what the Cloud has to offer - Avoid Common Pitfalls. Read the Whitepaper. http://pubads.g.doubleclick.net/gampad/clk?id=121054471iu=/4140/ostg.clktrk ___ Emc-users mailing list Emc-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/emc-users -- Managing the Performance of Cloud-Based Applications Take advantage of what the Cloud has to offer - Avoid Common Pitfalls. Read the Whitepaper. http://pubads.g.doubleclick.net/gampad/clk?id=121054471iu=/4140/ostg.clktrk ___ Emc-users mailing list Emc-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/emc-users -- Regards /Groete Marius D. Liebenberg +27 82 698 3251 +27 12 743 6064 -- Managing the Performance of Cloud-Based Applications Take advantage of what the Cloud has to offer - Avoid Common Pitfalls. Read the Whitepaper. http://pubads.g.doubleclick.net/gampad/clk?id=121054471iu=/4140/ostg.clktrk ___ Emc-users mailing list Emc-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/emc-users
Re: [Emc-users] Counterbore G code Generator
Ah you don't change the ini file directly when you save the preferences it updates the ini file. JT On 2/21/2014 7:31 AM, Marius Liebenberg wrote: I changed the units entry in the INI file. On 2014-02-21 15:15, John Thornton wrote: Where did you try and put mm? Change the preamble line to G21 ... for metric G code. I did fix a few things and 1.6.05 is the latest version. JT On 2/20/2014 3:02 PM, Marius Liebenberg wrote: John Does the metric units work. I tried with mm and MM but I get an error that says mill instance has no attribute 'units' On 2014-02-20 19:47, John Thornton wrote: I just uploaded 1.6.3 with some more content in the help file. JT On 2/20/2014 8:42 AM, Marius Liebenberg wrote: John did you update the version in the about box? I am still seeing 1.6.1. Now I dont know if I screwed up the extract. On 2014-02-20 16:24, John Thornton wrote: Ok, 1.6.2 is uploaded. Fixed the self induced error and added content to the help file. JT On 2/20/2014 7:59 AM, Marius Liebenberg wrote: Never mind I'll just use the Linux box. It work very well on that. Thanks John On 2014-02-20 15:49, Marius Liebenberg wrote: This one is on Windoze On 2014-02-20 15:44, John Thornton wrote: I'm on 10.04 and Python version is 2.6.5. Run from a terminal and let me know the error msg. Dunno if I can fix it or not... JT On 2/20/2014 7:32 AM, Marius Liebenberg wrote: Hi John I had to rebuild my laptop so now I am on Python 3.3 and there seem to be issues. What is the version that I should use rather? On 2014-02-20 14:59, John Thornton wrote: Hey Gene and anyone else, I added counterbore to my mill G code generator in version 1.6.0. http://gnipsel.com/files/g-code-generator/ Any feed back is appreciated. JT -- Managing the Performance of Cloud-Based Applications Take advantage of what the Cloud has to offer - Avoid Common Pitfalls. Read the Whitepaper. http://pubads.g.doubleclick.net/gampad/clk?id=121054471iu=/4140/ostg.clktrk ___ Emc-users mailing list Emc-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/emc-users -- Managing the Performance of Cloud-Based Applications Take advantage of what the Cloud has to offer - Avoid Common Pitfalls. Read the Whitepaper. http://pubads.g.doubleclick.net/gampad/clk?id=121054471iu=/4140/ostg.clktrk ___ Emc-users mailing list Emc-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/emc-users -- Managing the Performance of Cloud-Based Applications Take advantage of what the Cloud has to offer - Avoid Common Pitfalls. Read the Whitepaper. http://pubads.g.doubleclick.net/gampad/clk?id=121054471iu=/4140/ostg.clktrk ___ Emc-users mailing list Emc-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/emc-users -- Managing the Performance of Cloud-Based Applications Take advantage of what the Cloud has to offer - Avoid Common Pitfalls. Read the Whitepaper. http://pubads.g.doubleclick.net/gampad/clk?id=121054471iu=/4140/ostg.clktrk ___ Emc-users mailing list Emc-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/emc-users -- Managing the Performance of Cloud-Based Applications Take advantage of what the Cloud has to offer - Avoid Common Pitfalls. Read the Whitepaper. http://pubads.g.doubleclick.net/gampad/clk?id=121054471iu=/4140/ostg.clktrk ___ Emc-users mailing list Emc-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/emc-users -- Managing the Performance of Cloud-Based Applications Take advantage of what the Cloud has to offer - Avoid Common Pitfalls. Read the Whitepaper. http://pubads.g.doubleclick.net/gampad/clk?id=121054471iu=/4140/ostg.clktrk ___ Emc-users mailing list Emc-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/emc-users
Re: [Emc-users] Counterbore G code Generator
You see I am getting used to Linux. Always expect the difficult. On 2014-02-21 15:45, John Thornton wrote: Ah you don't change the ini file directly when you save the preferences it updates the ini file. JT On 2/21/2014 7:31 AM, Marius Liebenberg wrote: I changed the units entry in the INI file. On 2014-02-21 15:15, John Thornton wrote: Where did you try and put mm? Change the preamble line to G21 ... for metric G code. I did fix a few things and 1.6.05 is the latest version. JT On 2/20/2014 3:02 PM, Marius Liebenberg wrote: John Does the metric units work. I tried with mm and MM but I get an error that says mill instance has no attribute 'units' On 2014-02-20 19:47, John Thornton wrote: I just uploaded 1.6.3 with some more content in the help file. JT On 2/20/2014 8:42 AM, Marius Liebenberg wrote: John did you update the version in the about box? I am still seeing 1.6.1. Now I dont know if I screwed up the extract. On 2014-02-20 16:24, John Thornton wrote: Ok, 1.6.2 is uploaded. Fixed the self induced error and added content to the help file. JT On 2/20/2014 7:59 AM, Marius Liebenberg wrote: Never mind I'll just use the Linux box. It work very well on that. Thanks John On 2014-02-20 15:49, Marius Liebenberg wrote: This one is on Windoze On 2014-02-20 15:44, John Thornton wrote: I'm on 10.04 and Python version is 2.6.5. Run from a terminal and let me know the error msg. Dunno if I can fix it or not... JT On 2/20/2014 7:32 AM, Marius Liebenberg wrote: Hi John I had to rebuild my laptop so now I am on Python 3.3 and there seem to be issues. What is the version that I should use rather? On 2014-02-20 14:59, John Thornton wrote: Hey Gene and anyone else, I added counterbore to my mill G code generator in version 1.6.0. http://gnipsel.com/files/g-code-generator/ Any feed back is appreciated. JT -- Managing the Performance of Cloud-Based Applications Take advantage of what the Cloud has to offer - Avoid Common Pitfalls. Read the Whitepaper. http://pubads.g.doubleclick.net/gampad/clk?id=121054471iu=/4140/ostg.clktrk ___ Emc-users mailing list Emc-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/emc-users -- Managing the Performance of Cloud-Based Applications Take advantage of what the Cloud has to offer - Avoid Common Pitfalls. Read the Whitepaper. http://pubads.g.doubleclick.net/gampad/clk?id=121054471iu=/4140/ostg.clktrk ___ Emc-users mailing list Emc-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/emc-users -- Managing the Performance of Cloud-Based Applications Take advantage of what the Cloud has to offer - Avoid Common Pitfalls. Read the Whitepaper. http://pubads.g.doubleclick.net/gampad/clk?id=121054471iu=/4140/ostg.clktrk ___ Emc-users mailing list Emc-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/emc-users -- Managing the Performance of Cloud-Based Applications Take advantage of what the Cloud has to offer - Avoid Common Pitfalls. Read the Whitepaper. http://pubads.g.doubleclick.net/gampad/clk?id=121054471iu=/4140/ostg.clktrk ___ Emc-users mailing list Emc-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/emc-users -- Managing the Performance of Cloud-Based Applications Take advantage of what the Cloud has to offer - Avoid Common Pitfalls. Read the Whitepaper. http://pubads.g.doubleclick.net/gampad/clk?id=121054471iu=/4140/ostg.clktrk ___ Emc-users mailing list Emc-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/emc-users -- Managing the Performance of Cloud-Based Applications Take advantage of what the Cloud has to offer - Avoid Common Pitfalls. Read the Whitepaper. http://pubads.g.doubleclick.net/gampad/clk?id=121054471iu=/4140/ostg.clktrk ___ Emc-users mailing list Emc-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/emc-users -- Regards /Groete Marius D. Liebenberg +27 82 698 3251 +27 12 743 6064 -- Managing the Performance of Cloud-Based Applications Take advantage of what the Cloud has to offer - Avoid Common Pitfalls. Read the
Re: [Emc-users] Counterbore G code Generator
Let me know if you find anything else. JT On 2/21/2014 7:58 AM, Marius Liebenberg wrote: You see I am getting used to Linux. Always expect the difficult. On 2014-02-21 15:45, John Thornton wrote: Ah you don't change the ini file directly when you save the preferences it updates the ini file. JT On 2/21/2014 7:31 AM, Marius Liebenberg wrote: I changed the units entry in the INI file. On 2014-02-21 15:15, John Thornton wrote: Where did you try and put mm? Change the preamble line to G21 ... for metric G code. I did fix a few things and 1.6.05 is the latest version. JT On 2/20/2014 3:02 PM, Marius Liebenberg wrote: John Does the metric units work. I tried with mm and MM but I get an error that says mill instance has no attribute 'units' On 2014-02-20 19:47, John Thornton wrote: I just uploaded 1.6.3 with some more content in the help file. JT On 2/20/2014 8:42 AM, Marius Liebenberg wrote: John did you update the version in the about box? I am still seeing 1.6.1. Now I dont know if I screwed up the extract. On 2014-02-20 16:24, John Thornton wrote: Ok, 1.6.2 is uploaded. Fixed the self induced error and added content to the help file. JT On 2/20/2014 7:59 AM, Marius Liebenberg wrote: Never mind I'll just use the Linux box. It work very well on that. Thanks John On 2014-02-20 15:49, Marius Liebenberg wrote: This one is on Windoze On 2014-02-20 15:44, John Thornton wrote: I'm on 10.04 and Python version is 2.6.5. Run from a terminal and let me know the error msg. Dunno if I can fix it or not... JT On 2/20/2014 7:32 AM, Marius Liebenberg wrote: Hi John I had to rebuild my laptop so now I am on Python 3.3 and there seem to be issues. What is the version that I should use rather? On 2014-02-20 14:59, John Thornton wrote: Hey Gene and anyone else, I added counterbore to my mill G code generator in version 1.6.0. http://gnipsel.com/files/g-code-generator/ Any feed back is appreciated. JT -- Managing the Performance of Cloud-Based Applications Take advantage of what the Cloud has to offer - Avoid Common Pitfalls. Read the Whitepaper. http://pubads.g.doubleclick.net/gampad/clk?id=121054471iu=/4140/ostg.clktrk ___ Emc-users mailing list Emc-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/emc-users -- Managing the Performance of Cloud-Based Applications Take advantage of what the Cloud has to offer - Avoid Common Pitfalls. Read the Whitepaper. http://pubads.g.doubleclick.net/gampad/clk?id=121054471iu=/4140/ostg.clktrk ___ Emc-users mailing list Emc-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/emc-users -- Managing the Performance of Cloud-Based Applications Take advantage of what the Cloud has to offer - Avoid Common Pitfalls. Read the Whitepaper. http://pubads.g.doubleclick.net/gampad/clk?id=121054471iu=/4140/ostg.clktrk ___ Emc-users mailing list Emc-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/emc-users -- Managing the Performance of Cloud-Based Applications Take advantage of what the Cloud has to offer - Avoid Common Pitfalls. Read the Whitepaper. http://pubads.g.doubleclick.net/gampad/clk?id=121054471iu=/4140/ostg.clktrk ___ Emc-users mailing list Emc-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/emc-users -- Managing the Performance of Cloud-Based Applications Take advantage of what the Cloud has to offer - Avoid Common Pitfalls. Read the Whitepaper. http://pubads.g.doubleclick.net/gampad/clk?id=121054471iu=/4140/ostg.clktrk ___ Emc-users mailing list Emc-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/emc-users -- Managing the Performance of Cloud-Based Applications Take advantage of what the Cloud has to offer - Avoid Common Pitfalls. Read the Whitepaper. http://pubads.g.doubleclick.net/gampad/clk?id=121054471iu=/4140/ostg.clktrk ___ Emc-users mailing list Emc-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/emc-users -- Managing the Performance of Cloud-Based Applications Take advantage of what the Cloud has to offer - Avoid Common
Re: [Emc-users] Counterbore G code Generator
Hi John I had to rebuild my laptop so now I am on Python 3.3 and there seem to be issues. What is the version that I should use rather? On 2014-02-20 14:59, John Thornton wrote: Hey Gene and anyone else, I added counterbore to my mill G code generator in version 1.6.0. http://gnipsel.com/files/g-code-generator/ Any feed back is appreciated. JT -- Managing the Performance of Cloud-Based Applications Take advantage of what the Cloud has to offer - Avoid Common Pitfalls. Read the Whitepaper. http://pubads.g.doubleclick.net/gampad/clk?id=121054471iu=/4140/ostg.clktrk ___ Emc-users mailing list Emc-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/emc-users -- Regards /Groete Marius D. Liebenberg +27 82 698 3251 +27 12 743 6064 -- Managing the Performance of Cloud-Based Applications Take advantage of what the Cloud has to offer - Avoid Common Pitfalls. Read the Whitepaper. http://pubads.g.doubleclick.net/gampad/clk?id=121054471iu=/4140/ostg.clktrk ___ Emc-users mailing list Emc-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/emc-users
Re: [Emc-users] Counterbore G code Generator
I'm on 10.04 and Python version is 2.6.5. Run from a terminal and let me know the error msg. Dunno if I can fix it or not... JT On 2/20/2014 7:32 AM, Marius Liebenberg wrote: Hi John I had to rebuild my laptop so now I am on Python 3.3 and there seem to be issues. What is the version that I should use rather? On 2014-02-20 14:59, John Thornton wrote: Hey Gene and anyone else, I added counterbore to my mill G code generator in version 1.6.0. http://gnipsel.com/files/g-code-generator/ Any feed back is appreciated. JT -- Managing the Performance of Cloud-Based Applications Take advantage of what the Cloud has to offer - Avoid Common Pitfalls. Read the Whitepaper. http://pubads.g.doubleclick.net/gampad/clk?id=121054471iu=/4140/ostg.clktrk ___ Emc-users mailing list Emc-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/emc-users -- Managing the Performance of Cloud-Based Applications Take advantage of what the Cloud has to offer - Avoid Common Pitfalls. Read the Whitepaper. http://pubads.g.doubleclick.net/gampad/clk?id=121054471iu=/4140/ostg.clktrk ___ Emc-users mailing list Emc-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/emc-users
Re: [Emc-users] Counterbore G code Generator
This one is on Windoze On 2014-02-20 15:44, John Thornton wrote: I'm on 10.04 and Python version is 2.6.5. Run from a terminal and let me know the error msg. Dunno if I can fix it or not... JT On 2/20/2014 7:32 AM, Marius Liebenberg wrote: Hi John I had to rebuild my laptop so now I am on Python 3.3 and there seem to be issues. What is the version that I should use rather? On 2014-02-20 14:59, John Thornton wrote: Hey Gene and anyone else, I added counterbore to my mill G code generator in version 1.6.0. http://gnipsel.com/files/g-code-generator/ Any feed back is appreciated. JT -- Managing the Performance of Cloud-Based Applications Take advantage of what the Cloud has to offer - Avoid Common Pitfalls. Read the Whitepaper. http://pubads.g.doubleclick.net/gampad/clk?id=121054471iu=/4140/ostg.clktrk ___ Emc-users mailing list Emc-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/emc-users -- Managing the Performance of Cloud-Based Applications Take advantage of what the Cloud has to offer - Avoid Common Pitfalls. Read the Whitepaper. http://pubads.g.doubleclick.net/gampad/clk?id=121054471iu=/4140/ostg.clktrk ___ Emc-users mailing list Emc-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/emc-users -- Regards /Groete Marius D. Liebenberg +27 82 698 3251 +27 12 743 6064 -- Managing the Performance of Cloud-Based Applications Take advantage of what the Cloud has to offer - Avoid Common Pitfalls. Read the Whitepaper. http://pubads.g.doubleclick.net/gampad/clk?id=121054471iu=/4140/ostg.clktrk ___ Emc-users mailing list Emc-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/emc-users
Re: [Emc-users] Counterbore G code Generator
Never mind I'll just use the Linux box. It work very well on that. Thanks John On 2014-02-20 15:49, Marius Liebenberg wrote: This one is on Windoze On 2014-02-20 15:44, John Thornton wrote: I'm on 10.04 and Python version is 2.6.5. Run from a terminal and let me know the error msg. Dunno if I can fix it or not... JT On 2/20/2014 7:32 AM, Marius Liebenberg wrote: Hi John I had to rebuild my laptop so now I am on Python 3.3 and there seem to be issues. What is the version that I should use rather? On 2014-02-20 14:59, John Thornton wrote: Hey Gene and anyone else, I added counterbore to my mill G code generator in version 1.6.0. http://gnipsel.com/files/g-code-generator/ Any feed back is appreciated. JT -- Managing the Performance of Cloud-Based Applications Take advantage of what the Cloud has to offer - Avoid Common Pitfalls. Read the Whitepaper. http://pubads.g.doubleclick.net/gampad/clk?id=121054471iu=/4140/ostg.clktrk ___ Emc-users mailing list Emc-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/emc-users -- Managing the Performance of Cloud-Based Applications Take advantage of what the Cloud has to offer - Avoid Common Pitfalls. Read the Whitepaper. http://pubads.g.doubleclick.net/gampad/clk?id=121054471iu=/4140/ostg.clktrk ___ Emc-users mailing list Emc-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/emc-users -- Regards /Groete Marius D. Liebenberg +27 82 698 3251 +27 12 743 6064 -- Managing the Performance of Cloud-Based Applications Take advantage of what the Cloud has to offer - Avoid Common Pitfalls. Read the Whitepaper. http://pubads.g.doubleclick.net/gampad/clk?id=121054471iu=/4140/ostg.clktrk ___ Emc-users mailing list Emc-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/emc-users
Re: [Emc-users] Counterbore G code Generator
Ok, I can try and run it on windoze I have a couple of them running. JT On 2/20/2014 7:49 AM, Marius Liebenberg wrote: This one is on Windoze On 2014-02-20 15:44, John Thornton wrote: I'm on 10.04 and Python version is 2.6.5. Run from a terminal and let me know the error msg. Dunno if I can fix it or not... JT On 2/20/2014 7:32 AM, Marius Liebenberg wrote: Hi John I had to rebuild my laptop so now I am on Python 3.3 and there seem to be issues. What is the version that I should use rather? On 2014-02-20 14:59, John Thornton wrote: Hey Gene and anyone else, I added counterbore to my mill G code generator in version 1.6.0. http://gnipsel.com/files/g-code-generator/ Any feed back is appreciated. JT -- Managing the Performance of Cloud-Based Applications Take advantage of what the Cloud has to offer - Avoid Common Pitfalls. Read the Whitepaper. http://pubads.g.doubleclick.net/gampad/clk?id=121054471iu=/4140/ostg.clktrk ___ Emc-users mailing list Emc-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/emc-users -- Managing the Performance of Cloud-Based Applications Take advantage of what the Cloud has to offer - Avoid Common Pitfalls. Read the Whitepaper. http://pubads.g.doubleclick.net/gampad/clk?id=121054471iu=/4140/ostg.clktrk ___ Emc-users mailing list Emc-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/emc-users -- Managing the Performance of Cloud-Based Applications Take advantage of what the Cloud has to offer - Avoid Common Pitfalls. Read the Whitepaper. http://pubads.g.doubleclick.net/gampad/clk?id=121054471iu=/4140/ostg.clktrk ___ Emc-users mailing list Emc-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/emc-users
Re: [Emc-users] Counterbore G code Generator
Oh, and I have 1.6.1 up now. JT On 2/20/2014 7:49 AM, Marius Liebenberg wrote: This one is on Windoze On 2014-02-20 15:44, John Thornton wrote: I'm on 10.04 and Python version is 2.6.5. Run from a terminal and let me know the error msg. Dunno if I can fix it or not... JT On 2/20/2014 7:32 AM, Marius Liebenberg wrote: Hi John I had to rebuild my laptop so now I am on Python 3.3 and there seem to be issues. What is the version that I should use rather? On 2014-02-20 14:59, John Thornton wrote: Hey Gene and anyone else, I added counterbore to my mill G code generator in version 1.6.0. http://gnipsel.com/files/g-code-generator/ Any feed back is appreciated. JT -- Managing the Performance of Cloud-Based Applications Take advantage of what the Cloud has to offer - Avoid Common Pitfalls. Read the Whitepaper. http://pubads.g.doubleclick.net/gampad/clk?id=121054471iu=/4140/ostg.clktrk ___ Emc-users mailing list Emc-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/emc-users -- Managing the Performance of Cloud-Based Applications Take advantage of what the Cloud has to offer - Avoid Common Pitfalls. Read the Whitepaper. http://pubads.g.doubleclick.net/gampad/clk?id=121054471iu=/4140/ostg.clktrk ___ Emc-users mailing list Emc-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/emc-users -- Managing the Performance of Cloud-Based Applications Take advantage of what the Cloud has to offer - Avoid Common Pitfalls. Read the Whitepaper. http://pubads.g.doubleclick.net/gampad/clk?id=121054471iu=/4140/ostg.clktrk ___ Emc-users mailing list Emc-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/emc-users
Re: [Emc-users] Counterbore G code Generator
Give me a moment, I just spotted an error with the counterbore... JT On 2/20/2014 7:59 AM, Marius Liebenberg wrote: Never mind I'll just use the Linux box. It work very well on that. Thanks John On 2014-02-20 15:49, Marius Liebenberg wrote: This one is on Windoze On 2014-02-20 15:44, John Thornton wrote: I'm on 10.04 and Python version is 2.6.5. Run from a terminal and let me know the error msg. Dunno if I can fix it or not... JT On 2/20/2014 7:32 AM, Marius Liebenberg wrote: Hi John I had to rebuild my laptop so now I am on Python 3.3 and there seem to be issues. What is the version that I should use rather? On 2014-02-20 14:59, John Thornton wrote: Hey Gene and anyone else, I added counterbore to my mill G code generator in version 1.6.0. http://gnipsel.com/files/g-code-generator/ Any feed back is appreciated. JT -- Managing the Performance of Cloud-Based Applications Take advantage of what the Cloud has to offer - Avoid Common Pitfalls. Read the Whitepaper. http://pubads.g.doubleclick.net/gampad/clk?id=121054471iu=/4140/ostg.clktrk ___ Emc-users mailing list Emc-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/emc-users -- Managing the Performance of Cloud-Based Applications Take advantage of what the Cloud has to offer - Avoid Common Pitfalls. Read the Whitepaper. http://pubads.g.doubleclick.net/gampad/clk?id=121054471iu=/4140/ostg.clktrk ___ Emc-users mailing list Emc-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/emc-users -- Managing the Performance of Cloud-Based Applications Take advantage of what the Cloud has to offer - Avoid Common Pitfalls. Read the Whitepaper. http://pubads.g.doubleclick.net/gampad/clk?id=121054471iu=/4140/ostg.clktrk ___ Emc-users mailing list Emc-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/emc-users
Re: [Emc-users] Counterbore G code Generator
Ok, 1.6.2 is uploaded. Fixed the self induced error and added content to the help file. JT On 2/20/2014 7:59 AM, Marius Liebenberg wrote: Never mind I'll just use the Linux box. It work very well on that. Thanks John On 2014-02-20 15:49, Marius Liebenberg wrote: This one is on Windoze On 2014-02-20 15:44, John Thornton wrote: I'm on 10.04 and Python version is 2.6.5. Run from a terminal and let me know the error msg. Dunno if I can fix it or not... JT On 2/20/2014 7:32 AM, Marius Liebenberg wrote: Hi John I had to rebuild my laptop so now I am on Python 3.3 and there seem to be issues. What is the version that I should use rather? On 2014-02-20 14:59, John Thornton wrote: Hey Gene and anyone else, I added counterbore to my mill G code generator in version 1.6.0. http://gnipsel.com/files/g-code-generator/ Any feed back is appreciated. JT -- Managing the Performance of Cloud-Based Applications Take advantage of what the Cloud has to offer - Avoid Common Pitfalls. Read the Whitepaper. http://pubads.g.doubleclick.net/gampad/clk?id=121054471iu=/4140/ostg.clktrk ___ Emc-users mailing list Emc-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/emc-users -- Managing the Performance of Cloud-Based Applications Take advantage of what the Cloud has to offer - Avoid Common Pitfalls. Read the Whitepaper. http://pubads.g.doubleclick.net/gampad/clk?id=121054471iu=/4140/ostg.clktrk ___ Emc-users mailing list Emc-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/emc-users -- Managing the Performance of Cloud-Based Applications Take advantage of what the Cloud has to offer - Avoid Common Pitfalls. Read the Whitepaper. http://pubads.g.doubleclick.net/gampad/clk?id=121054471iu=/4140/ostg.clktrk ___ Emc-users mailing list Emc-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/emc-users
Re: [Emc-users] Counterbore G code Generator
I saw that but you where quicker on the draw:) If you did not choose counter bore it would give a null value error. If you did the calculation on the bore tab it would go away. Was it that one? On 2014-02-20 16:22, John Thornton wrote: Give me a moment, I just spotted an error with the counterbore... JT On 2/20/2014 7:59 AM, Marius Liebenberg wrote: Never mind I'll just use the Linux box. It work very well on that. Thanks John On 2014-02-20 15:49, Marius Liebenberg wrote: This one is on Windoze On 2014-02-20 15:44, John Thornton wrote: I'm on 10.04 and Python version is 2.6.5. Run from a terminal and let me know the error msg. Dunno if I can fix it or not... JT On 2/20/2014 7:32 AM, Marius Liebenberg wrote: Hi John I had to rebuild my laptop so now I am on Python 3.3 and there seem to be issues. What is the version that I should use rather? On 2014-02-20 14:59, John Thornton wrote: Hey Gene and anyone else, I added counterbore to my mill G code generator in version 1.6.0. http://gnipsel.com/files/g-code-generator/ Any feed back is appreciated. JT -- Managing the Performance of Cloud-Based Applications Take advantage of what the Cloud has to offer - Avoid Common Pitfalls. Read the Whitepaper. http://pubads.g.doubleclick.net/gampad/clk?id=121054471iu=/4140/ostg.clktrk ___ Emc-users mailing list Emc-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/emc-users -- Managing the Performance of Cloud-Based Applications Take advantage of what the Cloud has to offer - Avoid Common Pitfalls. Read the Whitepaper. http://pubads.g.doubleclick.net/gampad/clk?id=121054471iu=/4140/ostg.clktrk ___ Emc-users mailing list Emc-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/emc-users -- Managing the Performance of Cloud-Based Applications Take advantage of what the Cloud has to offer - Avoid Common Pitfalls. Read the Whitepaper. http://pubads.g.doubleclick.net/gampad/clk?id=121054471iu=/4140/ostg.clktrk ___ Emc-users mailing list Emc-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/emc-users -- Regards /Groete Marius D. Liebenberg +27 82 698 3251 +27 12 743 6064 -- Managing the Performance of Cloud-Based Applications Take advantage of what the Cloud has to offer - Avoid Common Pitfalls. Read the Whitepaper. http://pubads.g.doubleclick.net/gampad/clk?id=121054471iu=/4140/ostg.clktrk ___ Emc-users mailing list Emc-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/emc-users
Re: [Emc-users] Counterbore G code Generator
John did you update the version in the about box? I am still seeing 1.6.1. Now I dont know if I screwed up the extract. On 2014-02-20 16:24, John Thornton wrote: Ok, 1.6.2 is uploaded. Fixed the self induced error and added content to the help file. JT On 2/20/2014 7:59 AM, Marius Liebenberg wrote: Never mind I'll just use the Linux box. It work very well on that. Thanks John On 2014-02-20 15:49, Marius Liebenberg wrote: This one is on Windoze On 2014-02-20 15:44, John Thornton wrote: I'm on 10.04 and Python version is 2.6.5. Run from a terminal and let me know the error msg. Dunno if I can fix it or not... JT On 2/20/2014 7:32 AM, Marius Liebenberg wrote: Hi John I had to rebuild my laptop so now I am on Python 3.3 and there seem to be issues. What is the version that I should use rather? On 2014-02-20 14:59, John Thornton wrote: Hey Gene and anyone else, I added counterbore to my mill G code generator in version 1.6.0. http://gnipsel.com/files/g-code-generator/ Any feed back is appreciated. JT -- Managing the Performance of Cloud-Based Applications Take advantage of what the Cloud has to offer - Avoid Common Pitfalls. Read the Whitepaper. http://pubads.g.doubleclick.net/gampad/clk?id=121054471iu=/4140/ostg.clktrk ___ Emc-users mailing list Emc-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/emc-users -- Managing the Performance of Cloud-Based Applications Take advantage of what the Cloud has to offer - Avoid Common Pitfalls. Read the Whitepaper. http://pubads.g.doubleclick.net/gampad/clk?id=121054471iu=/4140/ostg.clktrk ___ Emc-users mailing list Emc-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/emc-users -- Managing the Performance of Cloud-Based Applications Take advantage of what the Cloud has to offer - Avoid Common Pitfalls. Read the Whitepaper. http://pubads.g.doubleclick.net/gampad/clk?id=121054471iu=/4140/ostg.clktrk ___ Emc-users mailing list Emc-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/emc-users -- Regards /Groete Marius D. Liebenberg +27 82 698 3251 +27 12 743 6064 -- Managing the Performance of Cloud-Based Applications Take advantage of what the Cloud has to offer - Avoid Common Pitfalls. Read the Whitepaper. http://pubads.g.doubleclick.net/gampad/clk?id=121054471iu=/4140/ostg.clktrk ___ Emc-users mailing list Emc-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/emc-users
Re: [Emc-users] Counterbore G code Generator
On Thursday 20 February 2014 10:05:45 John Thornton did opine: Hey Gene and anyone else, I added counterbore to my mill G code generator in version 1.6.0. http://gnipsel.com/files/g-code-generator/ Any feed back is appreciated. JT Good to hear John, I should be in a position to exercise it in another week, I burned up the plastic timing sprockets in the lathe drive last week and need to get that fixed, should have the stuff from LMS by the weekend. Linked from the wiki too I assume? -- Managing the Performance of Cloud-Based Applications Take advantage of what the Cloud has to offer - Avoid Common Pitfalls. Read the Whitepaper. http://pubads.g.doubleclick.net/gampad/clk?id=121054471iu=/4140/ostg.cl ktrk ___ Emc-users mailing list Emc-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/emc-users Cheers, Gene -- There are four boxes to be used in defense of liberty: soap, ballot, jury, and ammo. Please use in that order. -Ed Howdershelt (Author) Genes Web page http://geneslinuxbox.net:6309/gene NOTICE: Will pay 100 USD for an HP-4815A defective but complete probe assembly. -- Managing the Performance of Cloud-Based Applications Take advantage of what the Cloud has to offer - Avoid Common Pitfalls. Read the Whitepaper. http://pubads.g.doubleclick.net/gampad/clk?id=121054471iu=/4140/ostg.clktrk ___ Emc-users mailing list Emc-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/emc-users
Re: [Emc-users] Counterbore G code Generator
On Thursday 20 February 2014 10:11:28 John Thornton did opine: Ok, 1.6.2 is uploaded. Fixed the self induced error and added content to the help file. JT Got that one John and a big thank you. Haven't unpacked it yet though. On 2/20/2014 7:59 AM, Marius Liebenberg wrote: Never mind I'll just use the Linux box. It work very well on that. Thanks John On 2014-02-20 15:49, Marius Liebenberg wrote: This one is on Windoze On 2014-02-20 15:44, John Thornton wrote: I'm on 10.04 and Python version is 2.6.5. Run from a terminal and let me know the error msg. Dunno if I can fix it or not... JT On 2/20/2014 7:32 AM, Marius Liebenberg wrote: Hi John I had to rebuild my laptop so now I am on Python 3.3 and there seem to be issues. What is the version that I should use rather? On 2014-02-20 14:59, John Thornton wrote: Hey Gene and anyone else, I added counterbore to my mill G code generator in version 1.6.0. http://gnipsel.com/files/g-code-generator/ Any feed back is appreciated. JT -- Managing the Performance of Cloud-Based Applications Take advantage of what the Cloud has to offer - Avoid Common Pitfalls. Read the Whitepaper. http://pubads.g.doubleclick.net/gampad/clk?id=121054471iu=/4140/o stg.clktrk ___ Emc-users mailing list Emc-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/emc-users -- Managing the Performance of Cloud-Based Applications Take advantage of what the Cloud has to offer - Avoid Common Pitfalls. Read the Whitepaper. http://pubads.g.doubleclick.net/gampad/clk?id=121054471iu=/4140/ost g.clktrk ___ Emc-users mailing list Emc-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/emc-users -- Managing the Performance of Cloud-Based Applications Take advantage of what the Cloud has to offer - Avoid Common Pitfalls. Read the Whitepaper. http://pubads.g.doubleclick.net/gampad/clk?id=121054471iu=/4140/ostg.cl ktrk ___ Emc-users mailing list Emc-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/emc-users Cheers, Gene -- There are four boxes to be used in defense of liberty: soap, ballot, jury, and ammo. Please use in that order. -Ed Howdershelt (Author) Genes Web page http://geneslinuxbox.net:6309/gene NOTICE: Will pay 100 USD for an HP-4815A defective but complete probe assembly. -- Managing the Performance of Cloud-Based Applications Take advantage of what the Cloud has to offer - Avoid Common Pitfalls. Read the Whitepaper. http://pubads.g.doubleclick.net/gampad/clk?id=121054471iu=/4140/ostg.clktrk ___ Emc-users mailing list Emc-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/emc-users
Re: [Emc-users] Counterbore G code Generator
What I forgot to update is the variable... JT On 2/20/2014 8:42 AM, Marius Liebenberg wrote: John did you update the version in the about box? I am still seeing 1.6.1. Now I dont know if I screwed up the extract. On 2014-02-20 16:24, John Thornton wrote: Ok, 1.6.2 is uploaded. Fixed the self induced error and added content to the help file. JT On 2/20/2014 7:59 AM, Marius Liebenberg wrote: Never mind I'll just use the Linux box. It work very well on that. Thanks John On 2014-02-20 15:49, Marius Liebenberg wrote: This one is on Windoze On 2014-02-20 15:44, John Thornton wrote: I'm on 10.04 and Python version is 2.6.5. Run from a terminal and let me know the error msg. Dunno if I can fix it or not... JT On 2/20/2014 7:32 AM, Marius Liebenberg wrote: Hi John I had to rebuild my laptop so now I am on Python 3.3 and there seem to be issues. What is the version that I should use rather? On 2014-02-20 14:59, John Thornton wrote: Hey Gene and anyone else, I added counterbore to my mill G code generator in version 1.6.0. http://gnipsel.com/files/g-code-generator/ Any feed back is appreciated. JT -- Managing the Performance of Cloud-Based Applications Take advantage of what the Cloud has to offer - Avoid Common Pitfalls. Read the Whitepaper. http://pubads.g.doubleclick.net/gampad/clk?id=121054471iu=/4140/ostg.clktrk ___ Emc-users mailing list Emc-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/emc-users -- Managing the Performance of Cloud-Based Applications Take advantage of what the Cloud has to offer - Avoid Common Pitfalls. Read the Whitepaper. http://pubads.g.doubleclick.net/gampad/clk?id=121054471iu=/4140/ostg.clktrk ___ Emc-users mailing list Emc-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/emc-users -- Managing the Performance of Cloud-Based Applications Take advantage of what the Cloud has to offer - Avoid Common Pitfalls. Read the Whitepaper. http://pubads.g.doubleclick.net/gampad/clk?id=121054471iu=/4140/ostg.clktrk ___ Emc-users mailing list Emc-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/emc-users -- Managing the Performance of Cloud-Based Applications Take advantage of what the Cloud has to offer - Avoid Common Pitfalls. Read the Whitepaper. http://pubads.g.doubleclick.net/gampad/clk?id=121054471iu=/4140/ostg.clktrk ___ Emc-users mailing list Emc-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/emc-users
Re: [Emc-users] Counterbore G code Generator
The version updates from a variable so it is automagic. JT On 2/20/2014 8:42 AM, Marius Liebenberg wrote: John did you update the version in the about box? I am still seeing 1.6.1. Now I dont know if I screwed up the extract. On 2014-02-20 16:24, John Thornton wrote: Ok, 1.6.2 is uploaded. Fixed the self induced error and added content to the help file. JT On 2/20/2014 7:59 AM, Marius Liebenberg wrote: Never mind I'll just use the Linux box. It work very well on that. Thanks John On 2014-02-20 15:49, Marius Liebenberg wrote: This one is on Windoze On 2014-02-20 15:44, John Thornton wrote: I'm on 10.04 and Python version is 2.6.5. Run from a terminal and let me know the error msg. Dunno if I can fix it or not... JT On 2/20/2014 7:32 AM, Marius Liebenberg wrote: Hi John I had to rebuild my laptop so now I am on Python 3.3 and there seem to be issues. What is the version that I should use rather? On 2014-02-20 14:59, John Thornton wrote: Hey Gene and anyone else, I added counterbore to my mill G code generator in version 1.6.0. http://gnipsel.com/files/g-code-generator/ Any feed back is appreciated. JT -- Managing the Performance of Cloud-Based Applications Take advantage of what the Cloud has to offer - Avoid Common Pitfalls. Read the Whitepaper. http://pubads.g.doubleclick.net/gampad/clk?id=121054471iu=/4140/ostg.clktrk ___ Emc-users mailing list Emc-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/emc-users -- Managing the Performance of Cloud-Based Applications Take advantage of what the Cloud has to offer - Avoid Common Pitfalls. Read the Whitepaper. http://pubads.g.doubleclick.net/gampad/clk?id=121054471iu=/4140/ostg.clktrk ___ Emc-users mailing list Emc-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/emc-users -- Managing the Performance of Cloud-Based Applications Take advantage of what the Cloud has to offer - Avoid Common Pitfalls. Read the Whitepaper. http://pubads.g.doubleclick.net/gampad/clk?id=121054471iu=/4140/ostg.clktrk ___ Emc-users mailing list Emc-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/emc-users -- Managing the Performance of Cloud-Based Applications Take advantage of what the Cloud has to offer - Avoid Common Pitfalls. Read the Whitepaper. http://pubads.g.doubleclick.net/gampad/clk?id=121054471iu=/4140/ostg.clktrk ___ Emc-users mailing list Emc-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/emc-users
Re: [Emc-users] Counterbore G code Generator
no, you might have found a new one... let me see if I can reproduce it. JT On 2/20/2014 8:34 AM, Marius Liebenberg wrote: I saw that but you where quicker on the draw:) If you did not choose counter bore it would give a null value error. If you did the calculation on the bore tab it would go away. Was it that one? On 2014-02-20 16:22, John Thornton wrote: Give me a moment, I just spotted an error with the counterbore... JT On 2/20/2014 7:59 AM, Marius Liebenberg wrote: Never mind I'll just use the Linux box. It work very well on that. Thanks John On 2014-02-20 15:49, Marius Liebenberg wrote: This one is on Windoze On 2014-02-20 15:44, John Thornton wrote: I'm on 10.04 and Python version is 2.6.5. Run from a terminal and let me know the error msg. Dunno if I can fix it or not... JT On 2/20/2014 7:32 AM, Marius Liebenberg wrote: Hi John I had to rebuild my laptop so now I am on Python 3.3 and there seem to be issues. What is the version that I should use rather? On 2014-02-20 14:59, John Thornton wrote: Hey Gene and anyone else, I added counterbore to my mill G code generator in version 1.6.0. http://gnipsel.com/files/g-code-generator/ Any feed back is appreciated. JT -- Managing the Performance of Cloud-Based Applications Take advantage of what the Cloud has to offer - Avoid Common Pitfalls. Read the Whitepaper. http://pubads.g.doubleclick.net/gampad/clk?id=121054471iu=/4140/ostg.clktrk ___ Emc-users mailing list Emc-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/emc-users -- Managing the Performance of Cloud-Based Applications Take advantage of what the Cloud has to offer - Avoid Common Pitfalls. Read the Whitepaper. http://pubads.g.doubleclick.net/gampad/clk?id=121054471iu=/4140/ostg.clktrk ___ Emc-users mailing list Emc-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/emc-users -- Managing the Performance of Cloud-Based Applications Take advantage of what the Cloud has to offer - Avoid Common Pitfalls. Read the Whitepaper. http://pubads.g.doubleclick.net/gampad/clk?id=121054471iu=/4140/ostg.clktrk ___ Emc-users mailing list Emc-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/emc-users -- Managing the Performance of Cloud-Based Applications Take advantage of what the Cloud has to offer - Avoid Common Pitfalls. Read the Whitepaper. http://pubads.g.doubleclick.net/gampad/clk?id=121054471iu=/4140/ostg.clktrk ___ Emc-users mailing list Emc-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/emc-users
Re: [Emc-users] Counterbore G code Generator
I can't follow what you did to get the error, can you reproduce it? JT On 2/20/2014 8:34 AM, Marius Liebenberg wrote: I saw that but you where quicker on the draw:) If you did not choose counter bore it would give a null value error. If you did the calculation on the bore tab it would go away. Was it that one? On 2014-02-20 16:22, John Thornton wrote: Give me a moment, I just spotted an error with the counterbore... JT On 2/20/2014 7:59 AM, Marius Liebenberg wrote: Never mind I'll just use the Linux box. It work very well on that. Thanks John On 2014-02-20 15:49, Marius Liebenberg wrote: This one is on Windoze On 2014-02-20 15:44, John Thornton wrote: I'm on 10.04 and Python version is 2.6.5. Run from a terminal and let me know the error msg. Dunno if I can fix it or not... JT On 2/20/2014 7:32 AM, Marius Liebenberg wrote: Hi John I had to rebuild my laptop so now I am on Python 3.3 and there seem to be issues. What is the version that I should use rather? On 2014-02-20 14:59, John Thornton wrote: Hey Gene and anyone else, I added counterbore to my mill G code generator in version 1.6.0. http://gnipsel.com/files/g-code-generator/ Any feed back is appreciated. JT -- Managing the Performance of Cloud-Based Applications Take advantage of what the Cloud has to offer - Avoid Common Pitfalls. Read the Whitepaper. http://pubads.g.doubleclick.net/gampad/clk?id=121054471iu=/4140/ostg.clktrk ___ Emc-users mailing list Emc-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/emc-users -- Managing the Performance of Cloud-Based Applications Take advantage of what the Cloud has to offer - Avoid Common Pitfalls. Read the Whitepaper. http://pubads.g.doubleclick.net/gampad/clk?id=121054471iu=/4140/ostg.clktrk ___ Emc-users mailing list Emc-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/emc-users -- Managing the Performance of Cloud-Based Applications Take advantage of what the Cloud has to offer - Avoid Common Pitfalls. Read the Whitepaper. http://pubads.g.doubleclick.net/gampad/clk?id=121054471iu=/4140/ostg.clktrk ___ Emc-users mailing list Emc-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/emc-users -- Managing the Performance of Cloud-Based Applications Take advantage of what the Cloud has to offer - Avoid Common Pitfalls. Read the Whitepaper. http://pubads.g.doubleclick.net/gampad/clk?id=121054471iu=/4140/ostg.clktrk ___ Emc-users mailing list Emc-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/emc-users
Re: [Emc-users] Counterbore G code Generator
I just uploaded 1.6.3 with some more content in the help file. JT On 2/20/2014 8:42 AM, Marius Liebenberg wrote: John did you update the version in the about box? I am still seeing 1.6.1. Now I dont know if I screwed up the extract. On 2014-02-20 16:24, John Thornton wrote: Ok, 1.6.2 is uploaded. Fixed the self induced error and added content to the help file. JT On 2/20/2014 7:59 AM, Marius Liebenberg wrote: Never mind I'll just use the Linux box. It work very well on that. Thanks John On 2014-02-20 15:49, Marius Liebenberg wrote: This one is on Windoze On 2014-02-20 15:44, John Thornton wrote: I'm on 10.04 and Python version is 2.6.5. Run from a terminal and let me know the error msg. Dunno if I can fix it or not... JT On 2/20/2014 7:32 AM, Marius Liebenberg wrote: Hi John I had to rebuild my laptop so now I am on Python 3.3 and there seem to be issues. What is the version that I should use rather? On 2014-02-20 14:59, John Thornton wrote: Hey Gene and anyone else, I added counterbore to my mill G code generator in version 1.6.0. http://gnipsel.com/files/g-code-generator/ Any feed back is appreciated. JT -- Managing the Performance of Cloud-Based Applications Take advantage of what the Cloud has to offer - Avoid Common Pitfalls. Read the Whitepaper. http://pubads.g.doubleclick.net/gampad/clk?id=121054471iu=/4140/ostg.clktrk ___ Emc-users mailing list Emc-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/emc-users -- Managing the Performance of Cloud-Based Applications Take advantage of what the Cloud has to offer - Avoid Common Pitfalls. Read the Whitepaper. http://pubads.g.doubleclick.net/gampad/clk?id=121054471iu=/4140/ostg.clktrk ___ Emc-users mailing list Emc-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/emc-users -- Managing the Performance of Cloud-Based Applications Take advantage of what the Cloud has to offer - Avoid Common Pitfalls. Read the Whitepaper. http://pubads.g.doubleclick.net/gampad/clk?id=121054471iu=/4140/ostg.clktrk ___ Emc-users mailing list Emc-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/emc-users -- Managing the Performance of Cloud-Based Applications Take advantage of what the Cloud has to offer - Avoid Common Pitfalls. Read the Whitepaper. http://pubads.g.doubleclick.net/gampad/clk?id=121054471iu=/4140/ostg.clktrk ___ Emc-users mailing list Emc-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/emc-users
Re: [Emc-users] Counterbore G code Generator
John I did a tapping process with spot, drill, chamfer and tap. When I generated the Gcode it gave me an error that said the counter bore depth was null or zero. I pushed the chamfer depth button again and the error was gone. It only happened the once and I cannot recreate the error now.//I am wondering now if I maybe did not calculate the depth of the chamfer but the error said counter bore On 2014-02-20 19:18, John Thornton wrote: I can't follow what you did to get the error, can you reproduce it? JT On 2/20/2014 8:34 AM, Marius Liebenberg wrote: I saw that but you where quicker on the draw:) If you did not choose counter bore it would give a null value error. If you did the calculation on the bore tab it would go away. Was it that one? On 2014-02-20 16:22, John Thornton wrote: Give me a moment, I just spotted an error with the counterbore... JT On 2/20/2014 7:59 AM, Marius Liebenberg wrote: Never mind I'll just use the Linux box. It work very well on that. Thanks John On 2014-02-20 15:49, Marius Liebenberg wrote: This one is on Windoze On 2014-02-20 15:44, John Thornton wrote: I'm on 10.04 and Python version is 2.6.5. Run from a terminal and let me know the error msg. Dunno if I can fix it or not... JT On 2/20/2014 7:32 AM, Marius Liebenberg wrote: Hi John I had to rebuild my laptop so now I am on Python 3.3 and there seem to be issues. What is the version that I should use rather? On 2014-02-20 14:59, John Thornton wrote: Hey Gene and anyone else, I added counterbore to my mill G code generator in version 1.6.0. http://gnipsel.com/files/g-code-generator/ Any feed back is appreciated. JT -- Managing the Performance of Cloud-Based Applications Take advantage of what the Cloud has to offer - Avoid Common Pitfalls. Read the Whitepaper. http://pubads.g.doubleclick.net/gampad/clk?id=121054471iu=/4140/ostg.clktrk ___ Emc-users mailing list Emc-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/emc-users -- Managing the Performance of Cloud-Based Applications Take advantage of what the Cloud has to offer - Avoid Common Pitfalls. Read the Whitepaper. http://pubads.g.doubleclick.net/gampad/clk?id=121054471iu=/4140/ostg.clktrk ___ Emc-users mailing list Emc-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/emc-users -- Managing the Performance of Cloud-Based Applications Take advantage of what the Cloud has to offer - Avoid Common Pitfalls. Read the Whitepaper. http://pubads.g.doubleclick.net/gampad/clk?id=121054471iu=/4140/ostg.clktrk ___ Emc-users mailing list Emc-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/emc-users -- Managing the Performance of Cloud-Based Applications Take advantage of what the Cloud has to offer - Avoid Common Pitfalls. Read the Whitepaper. http://pubads.g.doubleclick.net/gampad/clk?id=121054471iu=/4140/ostg.clktrk ___ Emc-users mailing list Emc-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/emc-users -- Regards /Groete Marius D. Liebenberg +27 82 698 3251 +27 12 743 6064 -- Managing the Performance of Cloud-Based Applications Take advantage of what the Cloud has to offer - Avoid Common Pitfalls. Read the Whitepaper. http://pubads.g.doubleclick.net/gampad/clk?id=121054471iu=/4140/ostg.clktrk ___ Emc-users mailing list Emc-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/emc-users
Re: [Emc-users] Counterbore G code Generator
John Does the metric units work. I tried with mm and MM but I get an error that says mill instance has no attribute 'units' On 2014-02-20 19:47, John Thornton wrote: I just uploaded 1.6.3 with some more content in the help file. JT On 2/20/2014 8:42 AM, Marius Liebenberg wrote: John did you update the version in the about box? I am still seeing 1.6.1. Now I dont know if I screwed up the extract. On 2014-02-20 16:24, John Thornton wrote: Ok, 1.6.2 is uploaded. Fixed the self induced error and added content to the help file. JT On 2/20/2014 7:59 AM, Marius Liebenberg wrote: Never mind I'll just use the Linux box. It work very well on that. Thanks John On 2014-02-20 15:49, Marius Liebenberg wrote: This one is on Windoze On 2014-02-20 15:44, John Thornton wrote: I'm on 10.04 and Python version is 2.6.5. Run from a terminal and let me know the error msg. Dunno if I can fix it or not... JT On 2/20/2014 7:32 AM, Marius Liebenberg wrote: Hi John I had to rebuild my laptop so now I am on Python 3.3 and there seem to be issues. What is the version that I should use rather? On 2014-02-20 14:59, John Thornton wrote: Hey Gene and anyone else, I added counterbore to my mill G code generator in version 1.6.0. http://gnipsel.com/files/g-code-generator/ Any feed back is appreciated. JT -- Managing the Performance of Cloud-Based Applications Take advantage of what the Cloud has to offer - Avoid Common Pitfalls. Read the Whitepaper. http://pubads.g.doubleclick.net/gampad/clk?id=121054471iu=/4140/ostg.clktrk ___ Emc-users mailing list Emc-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/emc-users -- Managing the Performance of Cloud-Based Applications Take advantage of what the Cloud has to offer - Avoid Common Pitfalls. Read the Whitepaper. http://pubads.g.doubleclick.net/gampad/clk?id=121054471iu=/4140/ostg.clktrk ___ Emc-users mailing list Emc-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/emc-users -- Managing the Performance of Cloud-Based Applications Take advantage of what the Cloud has to offer - Avoid Common Pitfalls. Read the Whitepaper. http://pubads.g.doubleclick.net/gampad/clk?id=121054471iu=/4140/ostg.clktrk ___ Emc-users mailing list Emc-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/emc-users -- Managing the Performance of Cloud-Based Applications Take advantage of what the Cloud has to offer - Avoid Common Pitfalls. Read the Whitepaper. http://pubads.g.doubleclick.net/gampad/clk?id=121054471iu=/4140/ostg.clktrk ___ Emc-users mailing list Emc-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/emc-users -- Regards /Groete Marius D. Liebenberg +27 82 698 3251 +27 12 743 6064 -- Managing the Performance of Cloud-Based Applications Take advantage of what the Cloud has to offer - Avoid Common Pitfalls. Read the Whitepaper. http://pubads.g.doubleclick.net/gampad/clk?id=121054471iu=/4140/ostg.clktrk ___ Emc-users mailing list Emc-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/emc-users
