Ok, back to normal now. I did have a component that was causing the build to
fail early but fixed that and 2.7.0~pre7 built and runs. Thanks,
-Tom
> On Aug 14, 2015, at 2:44 PM, Tom Easterday wrote:
>>> Error: could not load module /home/tom/linuxcnc-dev/rtlib/rtapi.ko: No
>>> such file or dir
> On Aug 14, 2015, at 2:18 PM, Chris Radek wrote:
>
> On Fri, Aug 14, 2015 at 02:07:24PM -0400, Tom Easterday wrote:
>> I updated 2.7.0~pre6 to 2.7.0~pre7 via update manager in Wheezy
>> and now I get this when trying to launch (rip). Is there
>> something else I need to do?
>
> This makes no
On Fri, Aug 14, 2015 at 02:07:24PM -0400, Tom Easterday wrote:
> I updated 2.7.0~pre6 to 2.7.0~pre7 via update manager in Wheezy
> and now I get this when trying to launch (rip). Is there
> something else I need to do?
This makes no sense. If you install a package with the update
manager, that d
I updated 2.7.0~pre6 to 2.7.0~pre7 via update manager in Wheezy and now I get
this when trying to launch (rip). Is there something else I need to do?
=
LINUXCNC - 2.7.0~pre7
Machine configuration directory is
'/home/tom/linuxcnc/configs/EMCOturn120p-glade'
Machine
