How about three of these and three stepper drivers?
http://www.ebay.com/itm/231852285771
The push buttons are on/off and direction reverse. The switches could be
removed and connected to remote momentary ones, combined with a bit of logic
circuitry so that poking the one button starts the cycle
Hi
I just tried to link all three axis:
net emcmot.00.pos-cmd axis.0.motor-pos-cmd=> pid.0.command
net emcmot.00.pos-cmd => pid.1.command
net emcmot.00.pos-cmd => pid.2.command
That seams to work. I can't home any more, but for now that's good
enough.
Thanks for your super quick support.
On Thu, Sep 29, 2016, at 11:15 AM, John Kasunich wrote:
>
>
> On Thu, Sep 29, 2016, at 10:48 AM, Florian Rist wrote:
> > Could I do something with the axis jog pins:
> >
> > axis.0.jog-vel-mode
> > axis.0.jog-enable
> > axis.0.jog-scale
>
> Those are for using a jogwheel. See
> http:/
On Thu, Sep 29, 2016, at 10:48 AM, Florian Rist wrote:
> Hi John
>
> > Do you need/intend to use g-code at all for this installation?
>
> Yes.
In that case you want the LinuxCNC motion planner. It will
handle all the jogging, homing, etc, for you.
>
> And I'm now just trying to modify it qu
Hi Andy,
thanks for the suggestion:
> Connect the buttons to the halui.jog.N.minus and halui.jog.N.plus pins
That is indeed very easy. I just tried this. It kind of works.
Unfortunately the axis do not move fully synchronized. X starts first, a
fraction of second later y start to turn and y is
Hi John
> Do you need/intend to use g-code at all for this installation?
Yes.
And I'm now just trying to modify it quickly to do a manual
demonstration.
Could I do something with the axis jog pins:
axis.0.jog-vel-mode
axis.0.jog-enable
axis.0.jog-scale
> I have a few custom HAL compon
On 29 September 2016 at 14:58, Florian Rist wrote:
> Whats the best way to do this
Connect the buttons to the halui.jog.N.minus and halui.jog.N.plus pins
http://linuxcnc.org/docs/2.7/html/man/man1/halui.1.html
--
atp
"A motorcycle is a bicycle with a pandemonium attachment and is
designed f
Do you need/intend to use g-code at all for this installation?
If not, it is probably a good candidate for a "hal-only" configuration.
Stepgens, limit2 or limit3 blocks, muxes, integrators, etc, can be used
to do just about anything you can imagine. PyVCP can be used for
on-screen controls, and j
Maybe some kins so it is a real vector (I think that is what another
art installation did)
Dave Caroline
--
___
Emc-users mailing list
Emc-users@lists.sourceforge.net
https://li
Hi,
just a simple question:
I need to add two momentary switches to a 3 axis machine (not a mill,
more like a art installation) that jog all axis (xyz). Press one button
all axis move up, press the other one all move done in sync.
Whats the best way to do this. The three axis are moved by servo
10 matches
Mail list logo