On Sat, 9 Mar 2024, Todd Zuercher wrote:
Date: Sat, 9 Mar 2024 05:02:49 +
From: Todd Zuercher
Reply-To: "Enhanced Machine Controller (EMC)"
To: "Enhanced Machine Controller (EMC)"
Subject: Re: [Emc-users] Mesa 7i84 Field IO?
Peter,
But the only 5v output I n
On Sat, 9 Mar 2024 at 08:43, Todd Zuercher wrote:
> But the only 5v output I need is for the servo drive enable(s) All the limits
> are 24v prox sensors etc.
If you turn off one of the stepgens then those outputs will become
available as a pair of 5V GPIO pins.
--
atp
"A motorcycle is a
: Todd Zuercher
> Reply-To: "Enhanced Machine Controller (EMC)"
>
> To: "Enhanced Machine Controller (EMC)"
> Subject: [Emc-users] Mesa 7i84 Field IO?
>
> Hello,
>
> I am working at connecting a 7i84 IO card to a machine that I am refitting a
> newe
On 3/8/24 15:28, Peter Wallace wrote:
On Fri, 8 Mar 2024, Todd Zuercher wrote:
Date: Fri, 8 Mar 2024 19:59:14 +
From: Todd Zuercher
Reply-To: "Enhanced Machine Controller (EMC)"
To: "Enhanced Machine Controller (EMC)"
Subject: [Emc-users] Mesa 7i84 Field IO?
On Fri, 8 Mar 2024, Todd Zuercher wrote:
Date: Fri, 8 Mar 2024 19:59:14 +
From: Todd Zuercher
Reply-To: "Enhanced Machine Controller (EMC)"
To: "Enhanced Machine Controller (EMC)"
Subject: [Emc-users] Mesa 7i84 Field IO?
Hello,
I am working at connecting a 7i84
Hello,
I am working at connecting a 7i84 IO card to a machine that I am refitting a
newer Linuxcnc PC to. The old PC used an ISA card for IO. That will no longer
be an option with a newer PC.
My questions, the servo drives used 5v TTL signals for IO signals specifically
the ready/fault
