On 2/13/2016 12:15 PM, Bruce Layne wrote:
> There are several ways to accomplish a mirror image machining, and
> different methods will be better in different situations depending on
> the machine's capabilities and the person's inclinations.
>
> On my stepper driven CNC router,
>
> On such a machi
On Saturday 13 February 2016 23:12:57 Gregg Eshelman wrote:
> On 2/13/2016 3:56 AM, linden wrote:
> > Have a look at this it i am not sure if you can mirror with it i
> > don't think so, but it is python and may give some smarter people
> > than me ideas how Gene method may be automated. I have fo
On 2/13/2016 4:08 AM, Sarah Armstrong wrote:
> why not mirror parts using G41 G42 far quicker
According to my PLM2000 manual those are cutter compensation. 50 and 51
for scaling, 68 and 69 for rotation. No mention of mirroring in the list
of supported G codes.
---
This email has been checked f
On 2/13/2016 3:56 AM, linden wrote:
> Have a look at this it i am not sure if you can mirror with it i don't
> think so, but it is python and may give some smarter people than me
> ideas how Gene method may be automated. I have found this a very useful
> tool along with his F engrave.
>
> http://ww
On Saturday 13 February 2016 14:15:13 Bruce Layne wrote:
> There are several ways to accomplish a mirror image machining, and
> different methods will be better in different situations depending on
> the machine's capabilities and the person's inclinations.
>
> On my stepper driven CNC router, I h
On Saturday 13 February 2016 12:17:19 Sarah Armstrong wrote:
> see the excellent book " cnc programming handbook 3ed by peter smid
> page 409
>
> or in the following link to version 2 of the book , section 41 , pg
> 393
> https://www.dropbox.com/s/hujpvl8yvk5lbc8/CNC%20Programming%20Handbook
>.pdf
There are several ways to accomplish a mirror image machining, and
different methods will be better in different situations depending on
the machine's capabilities and the person's inclinations.
On my stepper driven CNC router, I have no limit switches because the
worst crash isn't fast enough
theirs no account needed it's mine ! LOL
On 13 February 2016 at 18:49, Philipp Burch wrote:
> Hi Gene!
>
> On 13.02.2016 19:41, Gene Heskett wrote:
> > [...]
> >
> > Might be nice, but not accessable to see it without creating an account.
>
> The dialog box may give this impression, but in fact
Hi Gene!
On 13.02.2016 19:41, Gene Heskett wrote:
> [...]
>
> Might be nice, but not accessable to see it without creating an account.
The dialog box may give this impression, but in fact you can just click
the link "No thanks, continue to view" at the bottom, which will give
you the option to d
On Saturday 13 February 2016 12:17:19 Sarah Armstrong wrote:
> see the excellent book " cnc programming handbook 3ed by peter smid
> page 409
>
> or in the following link to version 2 of the book , section 41 , pg
> 393
> https://www.dropbox.com/s/hujpvl8yvk5lbc8/CNC%20Programming%20Handbook
>.pdf
see the excellent book " cnc programming handbook 3ed by peter smid
page 409
or in the following link to version 2 of the book , section 41 , pg 393
https://www.dropbox.com/s/hujpvl8yvk5lbc8/CNC%20Programming%20Handbook.pdf?dl=0
On 13 February 2016 at 16:35, Gene Heskett wrote:
> On Saturday 1
On Saturday 13 February 2016 06:08:49 Sarah Armstrong wrote:
> why not mirror parts using G41 G42 far quicker
Zero documentation of that potential usage in the pdf docs? The next
person to see that code would shake his head at such convolution. I'm
looking at it, and would read that as applyi
On Saturday 13 February 2016 05:56:19 linden wrote:
> Have a look at this it i am not sure if you can mirror with it i don't
> think so, but it is python and may give some smarter people than me
> ideas how Gene method may be automated. I have found this a very
> useful tool along with his F engra
On Sat, 2016-02-13 at 02:18 -0700, Gregg Eshelman wrote:
> Is there a program, preferably for Windows, that can read a G-code file
> and make an altered copy to produce a file that will produce a mirror
> image of the original?
>
> I've done one that took quite a lot of work to get right, now I
hmm i dunno how cutter comp will mirror parts
i can be wrong ( again)
but
a historical note:
old AGIE 2D wire edm had front panel switches to 'flip X ' AND to 'flip Y'
it was to make setup easier.
it really just was a few logic gates in the stepper signals
so the idea might be of use,
a hardware s
why not mirror parts using G41 G42 far quicker
On 13 February 2016 at 10:56, linden wrote:
> Have a look at this it i am not sure if you can mirror with it i don't
> think so, but it is python and may give some smarter people than me
> ideas how Gene method may be automated. I have found this a
Have a look at this it i am not sure if you can mirror with it i don't
think so, but it is python and may give some smarter people than me
ideas how Gene method may be automated. I have found this a very useful
tool along with his F engrave.
http://www.scorchworks.com/Gcoderipper/gcoderipper.ht
On Saturday 13 February 2016 04:18:28 Gregg Eshelman wrote:
> Is there a program, preferably for Windows, that can read a G-code
> file and make an altered copy to produce a file that will produce a
> mirror image of the original?
>
> I've done one that took quite a lot of work to get right, now I
Greg
You can try Sheetcam. It can read a gcode file and then you can
manipulate the new gcode part. Like mirror etc.
Subject: [Emc-users] Software that can mirror image G-code?
>Is there a program, preferably for Windows, that can read a G-code file
>and make an altered copy to produce
Is there a program, preferably for Windows, that can read a G-code file
and make an altered copy to produce a file that will produce a mirror
image of the original?
I've done one that took quite a lot of work to get right, now I need the
code to cut the same part for the other side of the car.
20 matches
Mail list logo