subject:"\[Emc\-users\] Tripopkins"

Re: [Emc-users] Tripopkins

2017-07-27 Thread Nicklas Karlsson

You use halshow or watch tab on hal configuration to check all signals behave as expected? On Thu, 27 Jul 2017 06:08:50 -0700 Charles Brauer wrote: > What I did, was ran emc stepper_inch_parallel_port. Then edited the > core_hal file like this: > > # core HAL config

Re: [Emc-users] Tripopkins

2017-07-27 Thread andy pugh

On 27 July 2017 at 14:08, Charles Brauer wrote: > What happened, when I ran EMC, it loaded and when I jogged the x-axis the > x-motor ran, but not the y-motor. I would expect they would both run > together. Same with the y-axis, just the y-motor. I don't have the

[Emc-users] Tripopkins

2017-07-27 Thread Charles Brauer

What I did, was ran emc stepper_inch_parallel_port. Then edited the core_hal file like this: # core HAL config file for steppers # first load the core RT modules that will be needed # kinematics #I changed this- #load trivkins loadrt tripodkins setp tripodkins.Bx 25.1250 setp tripodkins.Cx