On Monday 19 November 2018 08:45:32 Les Newell wrote:
> > I don't have any spares that are 100% functional. I blew the probe
> > input on one while doing EDM on that machine, and a loose ground on
> > the frame of the G0704 did the probe input on another.
>
> If it's just one input you could just
: (330)828-2105ext. 2031
-Original Message-
From: Les Newell
Sent: Monday, November 19, 2018 8:46 AM
To: emc-users@lists.sourceforge.net
Subject: Re: [Emc-users] new docs
> I don't have any spares that are 100% functional. I blew the probe
> input on one while doing EDM on that m
I don't have any spares that are 100% functional. I blew the probe input
on one while doing EDM on that machine, and a loose ground on the frame
of the G0704 did the probe input on another.
If it's just one input you could just not use that input.
I've seen something similar, bring about
On Monday 19 November 2018 07:31:09 Les Newell wrote:
> Hi Gene,
>
> > I have taken to using an impact screwdriver tool on the
> > drawbar, and means to rack it up and down must be devised just to
> > engage it with the drawbar.
>
This drawbar has a 5/16 square tip, so its driven by an 8 point
Hi Gene,
I have taken to using an impact screwdriver tool on the
drawbar, and means to rack it up and down must be devised just to engage
it with the drawbar.
I have a commercially made drawbar that works like this. The impact
driver is simply pushed down by a pneumatic ram which is driven at
On Monday 19 November 2018 05:21:42 andy pugh wrote:
> On Mon, 19 Nov 2018 at 02:40, Gene Heskett
wrote:
> > > This is a stepper machine?
> >
> > Yes. But a pdm spindle setup on the 5i25's p3.
> > What firmware should I program the 5i25 with?
> >
> > The pdf I've pulled and printed doesn't say
On Mon, 19 Nov 2018 at 02:40, Gene Heskett wrote:
> > This is a stepper machine?
>
> Yes. But a pdm spindle setup on the 5i25's p3.
> What firmware should I program the 5i25 with?
>
> The pdf I've pulled and printed doesn't say what the D version is, but
> I'm assuming it means differential
On Sunday 18 November 2018 14:42:45 andy pugh wrote:
> On Sun, 18 Nov 2018 at 19:33, Gene Heskett
wrote:
> > i A 5i25 simply doesn't have enough pins. So $200 in a
> > 7i90HD and 7i42TA's is next, or some other means of expanding the
> > 5i25 for stuff thats not exactly real time bound
>
> This
Greetings;
I find I need to issue a blanket thank you to all who have been working
on the Documentation.pdf that was installed along with a fresh build of
master this morning. I don't know what was left out as its still under
740 pages, but all the gui and remap stuff is much more explanatory