On Thursday 17 January 2013 08:20:11 Juri Gerke wrote:
Hi there,
does Etherlab work with Matlab Simulink 2012 b ?
Yes, well put it this way, I am using it. You have to check the box Classic
call interface in Configuration Parameters - Code Generation - Interface
Kind regards
Juri
Hello,Raz
I have also used your vitrual slaves in kernel space.
In one pc, I just start the etherlab master(sudo /etc/init.d/ethercat start),
then in another pc,I insmod ecslave.ko with rxmac=XX:XX:XX:XX:XX:XX(in this pc,
i did not start ethercat master)
I want to get some of the slave's
On Thu, 2013-01-17 at 12:22 +0100, vilian...@sina.com wrote:
Hello,Raz
I have also used your vitrual slaves in kernel space.
In one pc, I just start the etherlab master(sudo /etc/init.d/ethercat
start),
then in another pc,I insmod ecslave.ko with rxmac=XX:XX:XX:XX:XX:XX(in
this pc, i did
It may be awhile. This is no longer my main line of development.
Original message
From: Raz razi...@gmail.com
Date:
To: babbitt...@aol.com
Cc: shab...@gmail.com,rbenyeh...@manz.com,etherlab-users@etherlab.org
Subject: Re: [etherlab-users] Open source virtual Linux
Just send the tar ball. I will clean it.
From: babbitt...@aol.com [mailto:babbitt...@aol.com]
Sent: Thursday, January 17, 2013 3:52 PM
To: razi...@gmail.com
Cc: shab...@gmail.com; Ben Yehuda, Raz; etherlab-users@etherlab.org
Subject: Re: [etherlab-users] Open source virtual Linux Ethercat Slave
