gt; From: Derrill Vezina [mailto:vezin...@gmail.com]
> Sent: Saturday, 7 July 2018 06:34
> To: Gavin Lambert
> Cc: Derrill Vezina ; etherlab-users@etherlab.org
> Subject: Re: [etherlab-users] Failed to execute SDO download: Protocol not
> supported
>
> The problem is that the
]
Sent: Saturday, 7 July 2018 06:34
To: Gavin Lambert
Cc: Derrill Vezina ; etherlab-users@etherlab.org
Subject: Re: [etherlab-users] Failed to execute SDO download: Protocol not
supported
The problem is that the downloads are not persistent and the PDO / Sync
registers do not hold on power cycle
...@caroneng.com]
> Sent: Friday, 6 July 2018 02:03
> To: Gavin Lambert ; Derrill Vezina
> ; etherlab-users@etherlab.org
> Subject: Re: [etherlab-users] Failed to execute SDO download: Protocol not
> supported
>
> Hi Gavin.
>
> I fully understand that this
To: Gavin Lambert ; Derrill Vezina
; etherlab-users@etherlab.org
Subject: Re: [etherlab-users] Failed to execute SDO download: Protocol not
supported
Hi Gavin.
I fully understand that this is a Beckhoff / integration issue and not anything
to do with the master. I have been doing as you instructed
d in your application matches this, by
> using those APIs mentioned above.
>
> From: Derrill Vezina
> Sent: Friday, 29 June 2018 01:40
> To: etherlab-users@etherlab.org
> Subject: [etherlab-users] Failed to execute SDO download: Protocol not
> supported
>
that the
configuration and assignment defined in your application matches this, by using
those APIs mentioned above.
From: Derrill Vezina
Sent: Friday, 29 June 2018 01:40
To: etherlab-users@etherlab.org
Subject: [etherlab-users] Failed to execute SDO download: Protocol not supported
Hi,
I am
Hi,
I am currently using a Beckhoff EL2502 PWM output card with the Etherlab 1.5.2
master using the generic ethernet driver. On startup, I am trying to set a PDO
assignment SDO register using ecrt_master_sdo_download() and am getting an
error back “Failed to execute SDO download: Protocol not