If you have the pinout for the Molex? connector on the old control it should
just be a conversion of cutting the wires from the Molex and adding spade
terminals for the new control. I'm guessing the signal wires are keyswitch,
enable/startswitch and throttle/potentiometer speed control. Make
I've had a 36v controller in stock for around a year and finally felt
the need to install. I find the new one is not a drop in replacement.
https://photos.app.goo.gl/szNSbHcgmnkjPGBh6
This is an EZGo, pre-TXT.
One photo shows the old controller in place side by side with the new
one. The ot
Any charger has internal sensing of its output voltage. This is nearly
always in the form of a resistor divider network.
If you place an additional resistor in parallel with one of the
sensing resistors, you can influence the voltage that the charger
'sees'. Raise the apparent voltage high enough
https://www.dailymail.co.uk/news/article-6847065/Driver-cheats-death-inches-lorry-crashes-straight-vehicle-Chinese-highway.html
This is why you never sit in a broken down car: Driver cheats death by
inches after lorry crashes straight into his vehicle on a Chinese highway
25 March 2019 Tracy You