the rpm as people have noted.. it's what I'm doing. :]
EOL
Tib
On Tue, 30 Jan 2001, Laurent Duperval wrote:
Hi,
I've noticed that whenever logrotate is run, it can take more than 2 hours
to complete. It looks like it's doing something fishy. I'm on LM 7.1 and
this is the ls -lt |head of /var/log
does this error mean (in
as much detail as possible please):
checking host system type... configure: error: can not guess host type; you
must specify one
I've run ./configure --help and the text it spits out is cryptic at best.
EOL
Tib
Greetings! I've been bashing my head on this dang program to compile it for a
long time now, and it finally gets past the gcc stuff.. but now it hits a
problem of not finding X includes - what is that and where do I set it?
EOL
Tib
installed, am I missing more?
EOL
Tib
Ok, solved a little bit of my own problem here, it's the same error as below,
but now it's only libraries that it's complaining about.
EOL
Tib
On Sat, 20 Jan 2001, Tib wrote:
Thanks pgeorges for the x include help, now I'm past that block and onto
another - here's the new one:
checking
.
EOL
Tib
I have rpm 3.0.4. It'll be 3.0.5 in a minute... thanks.
EOL
Tib
On Sat, 20 Jan 2001, Bill Piety wrote:
Tib wrote:
Ok, I was able to ignore this for a while, but now I'm stuck with an rpm
bitching about not having this file. where can I get it? I remember someone
mentioned
EOL
Tib
On Sat, 20 Jan 2001, Tib wrote:
I have rpm 3.0.4. It'll be 3.0.5 in a minute... thanks.
EOL
Tib
On Sat, 20 Jan 2001, Bill Piety wrote:
Tib wrote:
Ok, I was able to ignore this for a while, but now I'm stuck with an rpm
bitching about not having this file. where can I
Actually I tried it both ways and it still failed because of dependancies. How
VERY frustrating!!!
EOL
Tib
On Sun, 21 Jan 2001, Andrew George wrote:
On Sun, 21 Jan 2001 14:15, you wrote:
Grrr... in order for this to work, I have to find a menu of 2.1.29 first
because apparently rpm
Which c++ packages?
EOL
Tib
On Fri, 19 Jan 2001, pgeorges wrote:
Tib a écrit :
Why am I getting this message? I've compiled and installed plenty of other
programs, but what's this garbage I'm getting?
checking whether the C++ compiler (gcc ) works... no
configure: error
according to the manpage it's 'freshen'
EOL
Tib
On Thu, 18 Jan 2001, Mark Weaver wrote:
On Wednesday 17 January 2001 10:06 pm, you wrote:
On Mandrake's website, for each rpm update, it states to use rpm -Fvh
*.rpm
If you use that for a large quantity of rpm files, as I just tested
not.. that was a lot of
downloading).
EOL
Tib
UTILITY.
EOL
Tib
On Thu, 18 Jan 2001, Ron Heron wrote:
I may be doing it wrong, but by golly it has worked everytime!
#rpm -Uhv --force --nodeps *rpm
Ron
--- Tib [EMAIL PROTECTED] wrote:
Well, after 12 hours of downloading and stuff - the Freshen command I
used just
spit everything
MandrakeUpdate? That's not anything I can find on my filesystem
I'm running mandrake 7 btw...
EOL
Tib
On Fri, 19 Jan 2001, Alexander Skwar wrote:
So sprach Tib am Thu, Jan 18, 2001 at 02:25:38PM -0800:
how the hell do I update this SOB now? And did those files it downloaded stay
I'm stuck and don't want to force it, what is image magick?
EOL
Tib
On Thu, 18 Jan 2001, Tib wrote:
MandrakeUpdate? That's not anything I can find on my filesystem
I'm running mandrake 7 btw...
EOL
Tib
Is there a way to do a mass update of my RPMs? ie download them all and just do
rpm -Uvh * -nodep ? (or whatever that command would end up being)
EOL
Tib
installed
that are at that path, yes?
EOL
Tib
On Wed, 17 Jan 2001, Anthony Russello wrote:
On Mandrake's website, for each rpm update, it states to use rpm -Fvh
*.rpm
If you use that for a large quantity of rpm files, as I just tested, it
works just fine.
rpm -Fvh *.rpm
Thanks
Yes, and it's getting a little anoying.. it seems like the account ahs been
deleted and it's bouncing back to the list and being rebroadcast.
EOL
Tib
On Wed, 17 Jan 2001, b5dave wrote:
Hi folks,
Since a few days, whenever I post to the list I get an e-mail from
[EMAIL PROTECTED
[24573]: ioctl(TIOCSETD): Invalid argument(22)
Jan 15 19:10:48 unica pppd[24573]: Exit.
Make sense to someone other than me? I can't find where that module is in the
kernel (2.4.0).
EOL
Tib
the subscription notice hasn't come
through, so this is my last shot :]
EOL
Tib
an rpm for that.
EOL
Tib
-27mdk
EOL
Tib
On Sat, 13 Jan 2001, Andrew George wrote:
On Sat, 13 Jan 2001 21:56, Tib wrote:
I'm trying to compile a program and it's complaining that my standard gcc
can't compile executables. I installed ecgs c++ and running ./configure
ends up still giving the same error. So I try
at
download.sourceforge.net/pub/mirror/mandrake/current/i586/Mandrake/RPMS, and
the only one I could find at rpmfind.net was a cooker rpm and it gave me an
error trying to install that one. NOW what do I do?
EOL
Tib
rpm-3.0.4-0.12mdk is what I have now.
On 13 Jan 2001, BellSouth wrote:
On Sat, 13 Jan 2001 15:37:46 -0800 (PST), Tib said:
This is getting frustrating I tried to update the bzip2 rpm, and this is
what I get:
[root@unica seq]# rpm -Uvh bzip2-1.0.1-6mdk.i586.rpm
error
packages of
gcc) and both fail when I try to run an upgrade (rpm -Uvh) of a failed
dependency on /usr/sbin/update-alternatives. If I'm taking the hard route, can
someone bap me upside the head please?
EOL
Tib
No dice. Same error. the gcc it wants to use is /usr/bin/gcc
EOL
Tib
On Sat, 13 Jan 2001, John J. LeMay Jr. wrote:
** Reply to message from Tib [EMAIL PROTECTED] on Sat, 13 Jan 2001 18:42:08
-0800 (PST)
[root@unica linux]# ./configure
loading cache ./config.cache
checking for a BSD
-eth0:1 etc scripts? I created some modeled off of
ifcfg-eth0, but haven't rebooted yet. will this work or should I just rely on
my scripts?
EOL
Tib
check your actual config files.
EOL
Tib
On Sat, 6 Jan 2001, Cecil Watson wrote:
Yes, it does. I doesn't think you need to configure it at all. I have
it running on one machine with multiple virtual IPs and it answers to
then all.
SIR admin wrote:
can ssh be set up to listen on all IP
and brought up the network,
re-added routes the way they were before, and overall exhausted my brain with
this problem, can someone help please???
EOL
Tib
I stopped it, uninstalled it, and flushed all the ipchains rules. It /should/
be a clean setup again like I had before. But still it acts like I said
before: only icmp gets forwarded through it and data in general is extremely
slow.
EOL
Tib
On Wed, 3 Jan 2001, Mike MacCana wrote:
You can
Problem solved. Only thing I can figure is that something was blocking
everything but icmp, and I have no idea what it was, the setup mysteriously
started working this morning. Sorry for the fuss. Still as baffled as ever
though.
EOL
Tib
On Tue, 2 Jan 2001, Rusty Carruth wrote:
Tib [EMAIL
Sorry for the repeat post (if this actuall got through the first time, never
saw it come up), but where can I find docs or instructions to setup NAT for
mandrake 7?
EOL
Tib
Where would I find some good docs for setting up NAT on linux? Mandrake 7
EOL
Tib
*sam? I've not heard of any file with that extension on linux, but I'm familiar
with a hosts.sam under windows(nt,9x). if you remove the .sam and just make
them lmhosts or hosts then they work like /etc/hosts.
EOL
Tib
On Fri, 24 Nov 2000, xylonite wrote:
hi all,
is there any posible
the other loops to get it to point to
the right place.
EOL
Tib
On Fri, 24 Nov 2000, xylonite wrote:
*sam file is under windowxz . my problem is from browser can't reach www.mydom.com
but if
entering box name it can be done.
my question is how to call from client browser(netscape) call my box
distressing to see
the security information spewing all over every screen on the box. This is
mandrake 7, any suggestions? How can I stop this?
EOL
Tib
Keep in touch with http://mandrakeforum.com:
Subscribe the "[EMAIL PROTECTED]" mailing list.
that info
blasted over my connection.
EOL
Tib
On Wed, 22 Nov 2000, Anthony Russello wrote:
Take this as you will, but can't you just include a redirection to a file
instead, possibly in a directory only root has access to?
Every day at 4am, the cron.daily job runs. No big deal, except
.
EOL
Tib
Keep in touch with http://mandrakeforum.com:
Subscribe the "[EMAIL PROTECTED]" mailing list.
distressing to see
the security information spewing all over every screen on the box. This is
mandrake 7, any suggestions? How can I stop this?
EOL
Tib
Keep in touch with http://mandrakeforum.com:
Subscribe the "[EMAIL PROTECTED]" mailing list.
how to fix it should it happen again.
EOL
Tib
Keep in touch with http://mandrakeforum.com:
Subscribe the "[EMAIL PROTECTED]" mailing list.
I recently used mount to mount a shared windows folder on my linux box using
the command 'mount -t smbfs -o username=*,password=* //tib/c
/xchnge/'. everything worked fine until I powercycled the windows box without
unmounting the /xchnge point. Now I always get an io error whenever
modprobe: Note: /etc/conf.modules is more recent than
/lib/modules/2.2.15-4mdksecure/modules.dep
Help! I want sound on my linux box! :] Pretty please??
EOL
Tib
Keep in touch with http://mandrakeforum.com:
Subscribe the "[EMAIL PROTECTED]" mailing list.
it, but
apparently it's not recognized yet or it's just the plain wrong package. Anyone
have tips on how to install more fonts on this thing rather than just the
standard 75pt etc fonts which look terrible for web surfing?
EOL
Tib
Keep in touch with http://mandrakeforum.com:
Subscribe the "[
some extra
space, as it is where my household's files (mp3, zip, exe, etc..) go for
network storage. Any ideas?
EOL
Tib
Keep in touch with http://mandrakeforum.com:
Subscribe the "[EMAIL PROTECTED]" mailing list.
I'm not sure quite what is causing this or how to fix it. Thanks for any
assistance. :]
Nov 13 00:07:01 unica in.identd[11989]: fopen("/proc/net/tcp", "r"): Permission
denied
PS.
my /etc/services line for this goes like this:
'auth113/tcp authentication tap ident'
Don't mean to interject, but I'm having a similar problem, only that it did not
work to start with. I was originally running kde (which would be kdm I
suppose) but now run gnome. it's always been the same, just timing out on
searching for a connection. Help?
EOL
Tib
On Mon, 13 Nov 2000, Woody
it was a kernel upgrade I'd tried to do that was only
partially successful - had to end up building a new box - but it would start
successfully and die as soon as it was touched. Hope this is helpful :] just
trying to add my two bits of help since I've been getting a lot of it myself
lately.
EOL
Tib
Recently I left a 'tail -f' on a few log files going and saw some interesting
output. Can someone explain this and possibly how to fix it? I'm stumped why
syslogd would restart 10 times in the space of three seconds. Anyone?
- from the messages file -
Nov 12 04:02:11 unica syslogd 1.3-3:
If you privately mail me an address to send them to, I'll create a set and send
them for free :]
EOL
Tib
On Sat, 11 Nov 2000, HES wrote:
I am stuck running on a slow internet connection
I bought MDK 7.2 from Macmillan but it wont install
freezes durring second stage install. Does anyone
Strange - I took a peek out of sheer curiosity and I found it - what release
are you referring to? I'm running mandrake 7
EOL
Tib
I'm looking for it too and cannot find it.
Jeff Malka [EMAIL PROTECTED]
Registered Linux user 183185
- Original Message -
From: TK Kim [EMAIL
nevermind that :] seems I still need to pry my eyes open. 6pm is too early in
my day to be seeing these :]
Keep in touch with http://mandrakeforum.com:
Subscribe the "[EMAIL PROTECTED]" mailing list.
Greetings Programs!
While attempting to install Mailman (mailing list distribution software) on my
mandrake 7 box, it was noted in a readme that gnu needs hardlink restriction to
be turned off. How do I go about doing this? Thanks in advance.
EOL
Tib
PS I know this is a repeat post
Greetings Programs!
While attempting to install Mailman (mailing list distribution software) on my
mandrake 7 box, it was noted in a readme that gnu needs hardlink restriction to
be turned off. How do I go about doing this? Thanks in advance.
EOL
Tib
Keep in touch with http
53 matches
Mail list logo