new network card no visable

Hi all What happened to Kudzu ? lol I have replaced a network card on a firewall running fc10, I can see the network card in the lspci but it doesn't come up on network startup and isn't listed in system-configure-network-tui. The card if from the same manufacturer and has the same chip set as

need help installing VMware Server 1.0.9 on fc11

Hi I'm battling to get vmware server 1.0.9 installed .. I orignaly had fc 10 installed on my Acer Aspire one with vmware server 1.0.8 installed .. it worked fine .. Then I did a yum update to fc 11 .. now I can't get vmware server 1.0.9 installed on fc 11 now .. ether it won't compile the kernel

ti_usb_3410_5052: probe of 3-2:1.0 failed with error -5 ??

Hi I have a Huawei device that I have been using on fc 8 and fc 10. But now with fc 11 it does not work. Here is the log file entries for the device. Jun 13 15:42:25 localhost kernel: usb 3-2: USB disconnect, address 26 Jun 13 15:42:25 localhost kernel: usb 3-2: new full speed USB device using

removing legacy raid settings from a drive

Hi I have a drive from a software raid set that I'm trying to reformat. When I try and reformat it i get the following results [r...@ns ~]# mkfs.ext3 /dev/sdc1 mke2fs 1.41.4 (27-Jan-2009) /dev/sdc1 is apparently in use by the system; will not make a filesystem here! I see the drive has been

acer aspire one - gnome rsolution problem :-(

Hi I'm batteling to get the correct display resolution in gnome for my acer aspire one. In the display settings system prefrences hardware screen resolution the highest option I get is 1024 x 600. system-config-display allow me to configure to 1024 x 768 which is the correct max but these

rpmbuild and getting Missing Dependency

get this error ? Thanks Regards Gregory Machin Email: gmac...@techconcepts.co.za Cell: +27 (0) 72 524 5098 gtalk: gmachin.techconce...@gmail.com Support helpd...@techconcepts.co.za Tell: +27 (0) 11 803 2169 Fax: +27 (0) 11 803 2189 After Hours Cell:+27 (0) 82 790 0796 -- fedora

fedora on acer aspire one 150 .. please advise..

recommendations. I would obviously like to recompile the the kernel, to squeeze all I can out of it. Where could i find a good example config file to start with. should I be using i386 ? Thanks for you help. Regards Gregory Machin Email: gmac...@techconcepts.co.za Cell: +27 (0) 72 524 5098 gtalk

how do you get Spark IM to run on fc 9

Hi I would like to run Spark IM on my fc 9 x86_64 box as everyone else is using this IM in the office . I down loaded spark_2_5_8.tar.gz and unzipd it to /opt/ when I run ./starter I get [EMAIL PROTECTED] Spark]# ./starter testing JVM in /opt/Spark/jre ... and nothing happens .. there are no

Re: how do you get Spark IM to run on fc 9

Timms [EMAIL PROTECTED] wrote: David Timms wrote: Gregory Machin wrote: Hi I would like to run Spark IM on my fc 9 x86_64 box as everyone else is using this IM in the office . on f9 too ? I down loaded spark_2_5_8.tar.gz and unzipd it to /opt/ when I run ./starter I get did you try

Re: fc8 mysql libs brocken ??

No issues found [EMAIL PROTECTED] ~]# package-cleanup --clean Setting up yum No dupes to clean Thanks for the tip .. On Tue, Oct 21, 2008 at 7:41 AM, Craig White [EMAIL PROTECTED] wrote: On Tue, 2008-10-21 at 07:35 +0200, Gregory Machin wrote: On Mon, Oct 20, 2008 at 11:25 PM, David Timms

Re: fc8 mysql libs brocken ??

directory `/data/apps/pmacct/pmacct-0.11.5/src' make: *** [all-recursive] Error 1 2008/10/21 Michael Schwendt [EMAIL PROTECTED]: On Tue, 21 Oct 2008 11:40:06 +0200, Gregory Machin wrote: They are installed ... [EMAIL PROTECTED] pmacct-0.11.5]# rpm -qa --qf %{name}-%{version}-%{release}.%{arch

Re: fc8 mysql libs brocken ??

Cavalcanti [EMAIL PROTECTED] wrote: On Tue, Oct 21, 2008 at 8:52 AM, Gregory Machin [EMAIL PROTECTED] wrote: tried setarch tried addinf devel.x86_64 and tried setarch x86_64 and still get the following ... probe_plugin -Lnfprobe_plugin/ -lsfprobe_plugin -Lsfprobe_plugin/ /usr/bin/ld

fc8 mysql libs brocken ??

Hi I'm having a lot of trouble getting application with mysql dependencies to compile, all the errors are the same with the make /usr/bin/ld: skipping incompatible /usr/lib/mysql/libmysqlclient.so when searching for -lmysqlclient /usr/bin/ld: skipping incompatible /usr/lib/mysql/libmysqlclient.a

Re: fc8 mysql libs brocken ??

On Mon, Oct 20, 2008 at 11:25 PM, David Timms [EMAIL PROTECTED] wrote: Gregory Machin wrote: Hi I'm having a lot of trouble getting application with mysql dependencies to compile, all the errors are the same with the make /usr/bin/ld: skipping incompatible /usr/lib/mysql/libmysqlclient.so

Re: fc8 mysql libs brocken ??

uname -a Linux gregory-workstation.x.co.za 2.6.25.14-69.fc8 #1 SMP Mon Aug 4 14:00:45 EDT 2008 x86_64 x86_64 x86_64 GNU/Linux On Tue, Oct 21, 2008 at 7:42 AM, Paulo Cavalcanti [EMAIL PROTECTED] wrote: On Tue, Oct 21, 2008 at 3:35 AM, Gregory Machin [EMAIL PROTECTED] wrote: On Mon, Oct 20

Authenicated logon against AD

Hi In fc 8 there is a facility to authenticate users against AD on the menu system administration authentication I have configured Kerberose LDAP samba These are the errors typical errors I'm getting .. Sep 18 13:38:58 technical-vmwareserver winbindd[3563]: [2008/09/18 13:38:58, 0]

install of squirrelmail broken

Hi I did a yum install of squirrelmail and whe I view the log in page and login there is htm tags and other html junk alover the place... So I downloaded the orignal source and got the same result ... how do I fix this mess ? Thanks -- fedora-list mailing list fedora-list@redhat.com To

roundcubemail broken of fc machine

Hi I'm running fc 8, I had a manual install of roundcube 0.1.0 but there was a problem with the attachments so I tried to upgrade to 0.1.1 which is supposed to fix it .. Now when the attachments just don't display at all in Roundcube or in Thunderbird, the mail list shows there is an attachment in

Re: Yam repository for Fedora howto ?

+0200, Gregory Machin wrote: Hi can anyone recommend a good Yam howto for setting up local mirror for yum and automated installs ? OK, I'll bite. What's Yam? poc -- fedora-list mailing list fedora-list@redhat.com To unsubscribe: https://www.redhat.com/mailman/listinfo/fedora-list

Re: Yam repository for Fedora howto ?

Hi Then whats the difference between mrepo and yam ? On Thu, Aug 7, 2008 at 4:54 PM, Craig White [EMAIL PROTECTED] wrote: On Thu, 2008-08-07 at 10:32 +0200, Gregory Machin wrote: Hi can anyone recommend a good Yam howto for setting up local mirror for yum and automated installs ? yeah

Re: Yam repository for Fedora howto ?

wow i see bat man's best buddy the joker is out in full force to day .. lol On Fri, Aug 8, 2008 at 10:04 AM, Tim [EMAIL PROTECTED] wrote: On Fri, 2008-08-08 at 09:18 +0200, Gregory Machin wrote: Then whats the difference between mrepo and yam ? Five letters... -- Don't send private

apache and supporting resuming downloads

Hi what needs to be configured / installed for apache to support resuming downloads and mulit part downloads ? Thanks -- fedora-list mailing list fedora-list@redhat.com To unsubscribe: https://www.redhat.com/mailman/listinfo/fedora-list

Yam repository for Fedora howto ?

Hi can anyone recommend a good Yam howto for setting up local mirror for yum and automated installs ? Thanks -- fedora-list mailing list fedora-list@redhat.com To unsubscribe: https://www.redhat.com/mailman/listinfo/fedora-list

looking for a list of the kickstart kernel boot options ?

Hi I'm looking for a list of the kickstart kernel boot options. I can't find it in the redhat docs .. -- fedora-list mailing list fedora-list@redhat.com To unsubscribe: https://www.redhat.com/mailman/listinfo/fedora-list

kickstart ++ installing rpm

Hi I'm trying to install an rpm in the %post section of the install using /bin/rpm -Uvh http://192.168.2.203/devel/courier-imap/courier-imap-4.3.1-1.8.x86_64.rpm. The web server logs on 192.168.2.203 show that the file/s where downloaded. but after rebooting the files aren't installed .. this

Re: kickstart ++ installing rpm

Thanks thats a cool tip :-) 2008/8/6 Gianluca Cecchi [EMAIL PROTECTED]: On Wed, 6 Aug 2008 09:46:19 +0200 Gregory Machin wrote: I'm trying to install an rpm in the %post section of the install You can try to insert in your %post section something like this: %post # Define LOG FILE

kickstart file and fc 8 anaconda don't work ??

Hi I have a kickstart file generated by an fc 8 install. but when I try and install using it linux ks=htp://192.168.2.203/ks.cgi anaconda crashes spitting out errors the same kickstart file works fine on fc 6 .. the file is below .. what have I missed ? # Kickstart file automatically generated by

Re: kickstart file and fc 8 anaconda don't work ??

On Tue, Aug 5, 2008 at 8:27 AM, Clint Dilks [EMAIL PROTECTED] wrote: Gregory Machin wrote: Hi I have a kickstart file generated by an fc 8 install. but when I try and install using it linux ks=htp://192.168.2.203/ks.cgi anaconda crashes spitting out errors the same kickstart file works fine

Re: kickstart file and fc 8 anaconda don't work ??

That line wrap is caused by the email or the copy paste process .. there are not line wraps in the file . 2008/8/5 Mogens Kjaer [EMAIL PROTECTED]: Gregory Machin wrote: ... #logvol swap --fstype swap --name=LogVol01 --vgname=VolGroup00 --size=1000 --grow --maxsize=1984 It might be a stupid

Re: kickstart file and fc 8 anaconda don't work ??

Yip it was the cdrom bug .. lol .. 2008/8/5 Mogens Kjaer [EMAIL PROTECTED]: Gregory Machin wrote: ... install cdrom Seems like an F8 problem: http://www.redhat.com/archives/anaconda-devel-list/2007-November/msg00071.html You can remove the cdrom line and you will be asked to select

Re: kickstart file and fc 8 anaconda don't work ??

Thanks will give it a try in just a moment. 2008/8/5 Mogens Kjaer [EMAIL PROTECTED]: Gregory Machin wrote: ... install cdrom Seems like an F8 problem: http://www.redhat.com/archives/anaconda-devel-list/2007-November/msg00071.html You can remove the cdrom line and you will be asked

fc8 and kickstart break anaconda

Hi I'm trying to do fc 8 install with kickstart and loading the kickstart file via http ... but anaconda crashes as it's starting the gui etc ... I'm using the following at boot linux ks=http://192.168.2.203/ks.cgi kssendmac I can view the ks.cgi file from my browser. Anyone got any ideas