In the Commander software of the DXLab suite, it has a tab for suppport o=
f SDR-1000
Does anyone know if this is directly to the console software or is third pa=
rty Virtual Comm Port support required ?
-Dan
-- next part --
An HTML attachment was scrubbed...
URL:
Could you or someone else list the steps to setup psk31 with sdr1000?
I've never done it and any help you could provide would be much appreciated.
I used it for PSK31 operation tonight and will be
putting it to use on other modes over the next few days.
Paul Shaffer wrote:
Could you or someone else list the steps to setup psk31 with sdr1000?
I've never done it and any help you could provide would be much appreciated.
There's no difference between PSK31 and RTTY and just about _any_ use of
the SDR 1000 with third party software.
The
Harold and the group:
This is good news but what you have been describing to me sounds more
like interference. The interference is inside the computer with some
other application and/or some setting. There should be nothing in the
hardware that warms up and stops the audio from having
I use Ham Radio Deluxe, which Dave Bernstein (DxLabs author) and Simon
Brown have allowed to glue HRD to the DxLabs suite. These are my two
absolute all time favorite free as in beer amateur radio authors and
their work is outstanding.
HRD supports the PowerSDR and SDR-1000. Since Simon
Dan,
The SDR-1000 selection in DXLab Commander was designed to support the old VB
version of the console. Use one of the Kenwood emulations on both Commander
and your SDR-1000.
Bob, K5KDN
-Original Message-
From: [EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED] Behalf Of [EMAIL PROTECTED]
Thanks, Bill. The real kudos go to the Flex team for the underlying code
foundation they've created and the updates they continue to provide. My
changes are really just straightforward mods to this existing code base. If
a hardware engineer like me can figure out what's going on (for the most
=
nts/20060414/175babea/attachment.htm
://mail.flex-radio.biz/pipermail/flexradio_flex-radio.biz/attachments/20060414/175babea/attachment.htm
___
FlexRadio mailing list
FlexRadio@flex-radio.biz
http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz
Archive Link: http://mail.flex
that means. Can someone help me with this?
Thanks,
George Bennett
-- next part --
An HTML attachment was scrubbed...
URL:
http://mail.flex-radio.biz/pipermail/flexradio_flex-radio.biz/attachments/20060414/175babea/attachment.htm
George,
Goodness, that slice of moose poop pie I just finished was good!
Looking at the 87A manual I think the amp is automatically switched by
incoming RF from the SDR-1000 so you don't need the key input line or
the diode line.
I was thinking your amp was more along the lines of the Drake
Larry
Too much cholesterol boiled or unboiled. But I agree, boil-em before you
colorem!
(Smile)
Thanks
Eric
-Original Message-
From: [EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED] On Behalf Of Larry Taft
Sent: Friday, April 14, 2006 2:55 PM
To: George Bennett
Cc: FlexRadio@flex-radio.biz
My radio receive performance seems to have dropped off a cliff in the last 2
days.
Last week from idaho I was listening to puerto rico talk to japan on 17m, now
it's just noise.
Could this be due to the magnetic storm or did my crimp connections on the loop
flake out? I am new to radio so
After I originally posted regarding my Firebox problems you sent a very
interesting mail about the dsp wraparound effect. I totally saw this at 96k, the
signals wrapped around to the right side of the panadapter. The effect was
very prominent. I have been wondering ever since about the reports
to the keying input of the transmitter.
And the pdf manual is here.
http://www.alpharadioproducts.com/87A_manu.pdf
--John W0UN
-- next part --
An HTML attachment was scrubbed...
URL:
http://mail.flex-radio.biz/pipermail/flexradio_flex-radio.biz/attachments/20060414/dc8c0c6d
=
-
Yahoo! Messenger with Voice. PC-to-Phone calls for ridiculously low rates.
-- next part --
An HTML attachment was scrubbed...
URL: http://mail.flex-radio.biz/pipermail/flexradio_flex-radio.biz/attachme=
nts/20060414/c6d73e72
Will someone send me the Console file. It seems to download it I have to
join Yahoo -- I already get to much spam - I don't need another account.
Thanks for taking the time.
Best Regards
Dave
The current Ap is 45 and the Kp is 4. That indicates some geomagnetic
activity. There has been a G3 event in the past 24 hours. See the US
Dept. of Commerce, NOAA, Space Environment Center bulletins below.
Did you try reception on other bands?
Highlights of Solar and Geomagnetic Activity
03 -
Attention all Flexers!
It is with great excitement that I can announce that through the
dedication and hard work from Ray, K9DUR we now have an easy to use and
flexible tool for migrating individual tables from one PowerSDR.mdb to
another. You may ask why do I need this since PowerSDR has a
Just as a follow-up, the reason I am forced to delete/rename the default
.mdb file included in the build is due to an error (too many channels)
which blocks attempts at starting the console. If there's a way to
resolve this error perhaps using the default database will allow the cal
routines
Mark, you need to increase the RESOLUTION of your display.
Right click anywhere in your workspace (background) and
select PROPERTIES. From the tabs at the top select
SETTINGS and give it a go.
Some old monitors and old video cards won't display at
higher resolutions. Don't be surprised if
, W.B. Allen, ed. (543).
-- next part --
An HTML attachment was scrubbed...
URL:
http://mail.flex-radio.biz/pipermail/flexradio_flex-radio.biz/attachments/20060414/e76ea949/attachment.htm
Yes, and I at first thought it was the radio since wwv was quite low from
2.5 to 15 (20 is always low). wwv had been very strong since I set up
the new antenna.
Did you try reception on other bands?
23 matches
Mail list logo
