I personally like touch screens. But using them with PowerSDR is another
story. I am a tablet fanatic, first the iPad and now the Asus Transformer
Android tablet. I've spent a lot time trying different RDP (Remote Desktop)
clients. I use Jump Desktop on both tablets for its ease of use and for
Windows 7 SP1 has been out for a few days. Has anyone had any adverse issues
with the Service Pack, particularly with PowerSDR?
Everything has been working just fine and I don't want to mess things up
with a bad Service Pack. On the other hand, I don't want to be vulnerable
either. Running
I've noticed there are recent changes where ALC has been added to the
digital modes. I've always liked the idea of NOT having ALC when using sound
card type modes. There is a constant mantra on digi forums about NOT driving
the audio to the point where the ALC kicks in.
It would give me some
Thread is continued on Flex Edge reflector, as this seems to be pb-pal
related...
-Original Message-
From: Dudley Hurry [mailto:jhu...@austin.rr.com]
Sent: Wednesday, February 10, 2010 9:14 PM
To: Steve Kallal
Cc: flexradio@flex-radio.biz
Subject: Re: [Flexradio] HRD cat quit working
Is the download server having a glitch again? I can't download v1.18.4 at
http://support.flex-radio.com/Downloads.aspx?id=312. The browser simply
redirects to http://support.flex-radio.com/Downloads.aspx.
73,
Steve N6VL
___
FlexRadio Systems
I've been running my 5000A on a new Windows 7 32 bit install since last week
end. I thought I'd solved most of my problems
When I got home from work today, HRD CAT had quit working. It had been
working. Now it reads the initial frequency OK but never tracks any
frequency changes from PowerSDR.
on this reflector.
73,
Steve N6VL
-Original Message-
From: Dudley Hurry [mailto:jhu...@austin.rr.com]
Sent: Wednesday, February 10, 2010 9:14 PM
To: Steve Kallal
Cc: flexradio@flex-radio.biz
Subject: Re: [Flexradio] HRD cat quit working...
Steve,
Why don't you use VSP Mgr ?? It's based
I just switched to Windows 7 32 bit edition. Most things are working just
fine. But I just noticed that VAC is stuck at 44100 sample rate and I can't
change it. I search the reflector and found a very recent thread, but with
the FLEX-3000. I am using the 5000A and SVN 3531.
I've already tried
Thanks for the quick reply! I guess this is good news in that I'm not stuck
to 44100 sample rate. But there are some apps that are supposed to run at
11025. CwGet and WSJT both come to mind. They could both work with 44100
since it is 4 time the rate of 11025. I wonder if there is a script that
I just bit the bullet and installed Windows 7 32 bit Ultimate on my box.
I've read a lot in the past about optimizing Windows XP for PowerSDR. Is
there any info on how tweak Windows 7 is a similar manner?
73,
Steve N6VL
___
FlexRadio Systems
I have an issue w/ my FLEX-5000A experiencing a receiver drop out w/ WSJT7.
It doesn't seem like an audio drop per se. The receiver cuts out from a
split second. The timing is irregular. It can happen every few seconds to
once every few minutes. It is even worse w/ the JT65-HF program by W4CQZ (ex
Actually SVN 3165 is 1.18.1 on the PSDR window title bar.
Yes I finally did conclude the trunk is the 1.18.1 everyone is referring to.
73,
Steve N6VL
-Original Message-
From: flexradio-boun...@flex-radio.biz
[mailto:flexradio-boun...@flex-radio.biz] On Behalf Of Steven O'Neal
Sent:
I understand PowerSDR v1.18.1 can be found in SVN. Where in SVN?
73,
Steve N6VL
___
FlexRadio Systems Mailing List
FlexRadio@flex-radio.biz
http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz
Archives:
Tim,
I saw your post on eHam.net 5000A reviews. There were two detractors as you
know. You address the signed drivers part adequately. But the KB3Z comments
about using Firewire instead of USB, still needs to be addressed.
Could you give me some ammo (about Firewire vs USB) to fire back on the
Here here! I second that motion!
73,
Steve N6VL
-Original Message-
From: flexradio-boun...@flex-radio.biz
[mailto:flexradio-boun...@flex-radio.biz] On Behalf Of W5UN
Sent: Saturday, January 31, 2009 6:30 PM
To: flexradio@flex-radio.biz
Subject: [Flexradio] CW Spot button
The PowerSDR
I've been running PowerSDR since yesterday evening with the latest Gigabyte
bios. I am now able to run MS Outlook while PowerSDR is running without any
glitches so far! It looks like my latency problem is over or at least
greatly improved.
I could see using a coprocessor when doing CPU disk
___
FlexRadio Systems Mailing List
FlexRadio@flex-radio.biz
http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz
Archives: http://www.mail-archive.com/flexradio%40flex-radio.biz/
Knowledge Base: http://kb.flex-radio.com/ Homepage:
Great news! Thanks to Jim K5HY, I have been able to get my DPCs way down by
getting the latest bios for my Gigabyte GA-P35-DS3L motherboard. A Google
search revealed some gamers who had the exact same DPC spikes when running
the dpclat.exe utility. The latency issues were NOT even mentioned as a
I have a P35 DS3L here and have similar symptoms. Where do I download the
experimental BIOS? Does it wipe out my CMOS settings?
73,
Steve N6VL
-Original Message-
From: [EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED] On Behalf Of Jim R
Sent: Tuesday, July 29, 2008 9:13 PM
To: Don;
My PC is NOT a dell...
73,
Steve N6VL
-Original Message-
From: Tim Ellison [mailto:[EMAIL PROTECTED]
Sent: Wednesday, July 30, 2008 9:18 AM
To: Steve Kallal; 'Jim R'; flexradio@flex-radio.biz
Subject: RE: [Flexradio] Unusual Problem
Call Dell support. They can assist you on your
I reported the other day that the microHAM debouncer had solved my problems
with the rear key jack. I can now report that it seems to have fixed it for
one key, a high sideswiper key from GHD. My results from a bug and Kent
paddles are not entirely successful.
That means I may to back to the
I am trying to drive a DEMI 144-28 transverter from the 5000A XVTX/COM jack.
There is no measurable output on 2 meters. That leaves me having to
determine what is wrong. I used the same transverter two years ago with the
SDR-1000 driving it from the 1 W BNC output.
Normally I'd contact DEMI by
I finally have been able to get the rear key jack to work on my 5000A. It is
the same solution offered in the knowledge base at
http://kb.flex-radio.com/article.aspx?id=10487.
The solution is the Begali version of the microHam Paddle Processor
Debouncer. The Begali version has a ¼ TRS plug
I switched to Thunderbird from Outlook 2003 in hopes of using it with my
5000A. Outlook always caused PowerSDR to hang. A simple stop and start
would bring PowerSDR back to life.
Surprise! Thunderbird does the same thing. I download a LOT of email for
various reflectors. Perhaps that is what
Jim,
You might be cutting off the air flow with that filter. The top vent is
on the rear for a reason. The air flow is diagonal across the inner
case. Press the control-shift-I key combination often to get the
temperature.
I keep my 5000A under my main desk. The beauty of an SDR rig, is that
George,
First, are these all present with RX1. Your first comment mentions RX2.
I don't use the rear CW jack. I have produced some good CW with a cap
across key cable, but only use straight keys, bugs, etc. Paddles would
require a cap across each line to ground. 1 microfarad is a good
Yes I have seen the same bug, but didn't get around to posting it on the bug
tracker yet. I noticed it one evening on 40 meters with RX1 set to CW at the
low end and RX2 listening up in the phone section. I haven't tried it in
reverse, that is RX1 as SSB and RX2 as CW.
73,
Steve N6VL
-
I for one am glad Flex is making improvements with the new HRFIO board. I even
whined at Tim online about it. He said Gerald would be making an announcement.
I had visions of using my RX2 to hook up two transmitting antennas and be able
to switch between them. I am using only open wire fed
Same problem here! The video doesn't finish.
73,
Steve N6VL
-Original Message-
From: [EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED] On Behalf Of Edward J White
Sent: Saturday, June 14, 2008 7:31 PM
To: Neal Campbell
Cc: FlexRadio reflector
Subject: Re: [Flexradio] RX2 Demo video posted on
I am now encountering the dreaded LA commute, about 90 minutes each way to
my company's regional office. I hope to get back to more local work soon.
I noticed some graffiti underneath an overpass. Someone spray painted
Flexer. I'd pull over and snap a photo if I wouldn't get clobbered by the
I am basically happy with the CW performance of the 5000, especially with
the W2RF experimental console. I have some issues with audio popping with
the standard version from the trunk branch. Like Dale, I don't need full QSK
and find it a distraction. But I don't think the 5000, with the current
I remember hearing about being able to use VAC while operating with a
microphone. There is a new option Allow PTT to override/bypass VAC for
phone. It sounds like this shuts off any VAC audio while transmitting. Is
this true?
I would like to be able to mix microphone VAC when transmitting. One
: Thursday, May 29, 2008 7:22 AM
To: 'Steve Kallal'; flexradio@flex-radio.biz
Subject: RE: [Flexradio] Changing the IF on the 5000
Steve,
I suspect that you are just moving the LO when you change the IF and you
will find those same spurs tuning up or down by the amount that you changed
it.
You
Jim,
The Quick Start Guide at http://support.flex-radio.com/Downloads.aspx?id=174
has the following text in bold at the end of #1:
-
You can turn on your computer before powering up the FLEX-5000 only if
you wait 30
I am wondering about the DDS IF (Hz) value. It defaults to 9000 Hz. I
searched the reflector archives and noticed the changing the IF (Hz) value
requires a complete recalibration. Does that apply to the FLEX-5000, or only
to the SDR-1000?
I just tried setting the IF (Hz) value to 0 and found
I'll really do appreciate Fred's efforts to clean up the audio. But it is a
better master recording somewhere? It is really hard to understand.
73,
Steve N6VL
-Original Message-
From: [EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED] On Behalf Of Tim Ellison
Sent: Tuesday, May 20, 2008 2:06
I also like Ed's (W2RF) code. It definitely makes CW operation a lot
smoother.
That said, I plan to purchase the 2nd receiver, which will require changes
added by Eric in the trunk branch. I am concerned that Ed's code won't
support the 2nd receiver.
1. Will Ed merge the 2nd receiver code into
Pete,
Go to Setup | CAT Control. Check DigL/U Returns LSB/USB. That should fix
it.
73,
Steve N6VL
-Original Message-
From: [EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED] On Behalf Of Peter Spader
Sent: Friday, May 09, 2008 5:42 PM
To: flexradio@flex-radio.biz
Subject: [Flexradio] MixW
I get the following error when clicking on the Knowledge Base:
Configuration Error!
The required application setting InstantKB_ShowAdminTab cannot be found
within the InstantKB.config configuration file.
This setting must exist in the following format:
InstantKB
ConfigValues
I worked a local on PSK31 with my FLEX-5000A yesterday. Our frequencies were
separated by over 20 Hz. I asked if his RIT was on. He suggested mine was
on, in reply. I worked another local and the same thing happened. That means
the problem is on my end.
I was using DM 780 for the digital comm
I have a buddy who just bought a second hand 756 PRO II. He is really proud
of it. I had to keep my mouth shut. The PRO II spectrum scope is almost
useless compared to the PowerSDR panadaptor. I guess for someone who
upgraded from the 746, the spectrum scope is heaven.
Nuff said!
73,
Steve N6VL
I just tried to register for the forum per Tim's suggestion. I am not
getting a validaton email. Even requested it to be resent twice in addition
to the initial request. Still nothing in my in box.
Is there a problem with the forum mail server?
73,
Steve N6VL
5000-T? Where can I get one?
Also check out the Elecraft site at
http://www.elecraft.com/K2_perf.htm#Main%20RX%20Table. They pushed the
FLEX-5000 way down the list compared to Sherwood's site. They even put the
K2 above the 5000. How truthful is that? I own a K2, and believe me the 5000
has a
I am looking for other FLEX-5000A owners in the LA Orange County area. I
want to find someone who successfully operates CW from the rear jack wo/ any
problems. I have been unable to use the rear key jack due to erratic
response using both paddles and straight keys. I did find one owner, but his
Mike Don,
Nice to hear another SKCC member is using the FLEX-5000A.
Ditto on all the symptoms you are experiencing. I have the same problems and
haven't found a solution, but only a work around. I use a COM port on my
motherboard for CW input. Many motherboards today don't have any serial
ports
Does anyone have any NR parameters they find useful? Last fall, PowerSDR
went to four NR parameters versus three, and removed Block LMS. I'd like to
hear about any values that work well. I have noticed that the narrower the
filter bandwidth, the less effective NR is.
73,
Steve N6VL
I've already emailed Dudley on this. If someone else has the power
calibration procedure for the 5000A, I'd like to have it. My power is about
10 to 20% low.
73,
Steve N6VL
___
FlexRadio Systems Mailing List
FlexRadio@flex-radio.biz
A while back the NR in PowerSDR was reworked. The leakage parameter was
added (or brought back) and Block LMS was removed. I asked at the time about
the reduced NR performance and was told some beta testers were working on it
and the best settings would be released. That was sometime back in the
I have the Bose Campanion 2 speakers. I only have one complaint. There is no
way to turn it off. Has an AC step down wall wart.
Otherwise it has been an excellent speaker set for the 5000A. I used it with
the SDR-1000, but the audio output wasn't as high. The 5000A puts out more
audio than the
It looks like the gang at Flex have quietly posted a new PowerSDR release
v1.10.4 on the home page. I know it was v1.10.3 earlier this week.
73,
Steve N6VL
___
FlexRadio Systems Mailing List
FlexRadio@flex-radio.biz
Mike,
I've given up on the rear CW jack for straight key use, at least for now. I
haven't mentioned it much lately, but probably should. My symptons are not
as bad as your's, but similar.
I use COM1 on my PC for straight key use. COM1 is a real COM port on my new
quad core motherboard, kind of
PROTECTED]
Sent: Tuesday, December 11, 2007 12:12 PM
To: Robert McGwier; Steve Kallal
Cc: flexradio@flex-radio.biz
Subject: Re: [Flexradio] Worked FDMDV mode w/ FLEX-5000A...
At 11:34 AM 12/11/2007, Robert McGwier wrote:
MELP is covered by multiple patents. It is not licensed to anyone who
has
There is a new digital voice mode in town: FDMDV. It occupies 1.1 kHz, and
the panadapter verifies this. I've had two QSOs so far, both in NY state on
20 meters. The popular frequency is 14,236 kHz. Most of Mel's (K0PFX)
knowledge base article on WinDRM applies to the FLEX-5000. PowerSDR is set
I want to try WinDRM with the 5000A, but cannot determine how to setup the
transmit audio without using a separate sound card. I'd like to keep my Heil
microphones connected to the 5000A.
This is a topic that Mel K0PFX understands. I've emailed him privately. I
wonder if anyone else has done
difficult. I am not
sure how accurately I can generate the tones. They are in tenths of Hz. I do
know I can set the volume level easily.
73,
Steve N6VL
-Original Message-
From: Eric Wachsmann [mailto:[EMAIL PROTECTED]
Sent: Wednesday, December 05, 2007 9:11 AM
To: 'Steve Kallal'; flexradio
The question of CTCSS has been posed on this reflector once before. Tim
W4TME, came up with a CTCSS software solution at
http://comtekk.us/tone-remote-console.htm, but offered no solution on how to
integrate it with PowerSDR. I am willing to code a solution if I can get
some guidance on
I downloaded SVN 1783 and notice there is a new leakage parameter. Could
N4HY or anyone else knowledgeable on the subject tells us how to use it? The
Block LMS system was pretty easy to setup.
73,
Steve N6VL
-- next part --
An HTML attachment was scrubbed...
URL:
I broke down and got a quad core system over the weekend. Overall it is a
definite improvement, there are some surprises.
My old system is a P4 2.6 GHz Intel with 1 GB RAM. My new system is a quad
core w/ 2.4 GHz each core with 2 GB RAM. The mother board is a Gigabyte
GA-P35-DS3L. It does have
I've been playing with the Window selection on the DSP setup screen. I
really can't tell any on the air difference between them in receive. There
are very slight differences in the display. From past searches, I've noticed
comments about differences in reception. In laymen's terms, what do these
The lastest 5000 manual has a circuit with a relay to act as a protection
buffer between the 5000A and any external device. I got a reed relay from
Radio Shack in the hope that is fast enough for any switching needs. I also
got a diode to put across the coil to prevent transients. Would a reed
-
From: Eric Wachsmann [mailto:[EMAIL PROTECTED]
Sent: Wednesday, November 28, 2007 7:38 AM
To: 'Steve Kallal'; flexradio@flex-radio.biz
Subject: RE: [Flexradio] HC-5 sound from Pro element
I'm no microphone expert. John can probably help you with how to make the
HC-4 sound like an HC-5 or vice
increase the gain.
73,
Steve N6VL
-Original Message-
From: John P Basilotto W5GI [mailto:[EMAIL PROTECTED]
Sent: Wednesday, November 28, 2007 12:43 PM
To: 'Steve Kallal'; 'Eric Wachsmann'; flexradio@flex-radio.biz
Subject: RE: [Flexradio] HC-5 sound from Pro element
Steve,
The Heil 4
Let me restate my earlier HPET question. Hopefully I will be a little
clearer this time.
I want to use the High Res option in the Keyer setup screen. There are some
dual core motherboards out there with Intel chipsets that DON'T have a BIOS
option to enable or disable HPET. I do need to restrict
Bob,
I had issues earlier, but only on 80 meters. I posted a message to this
reflector about large transmit spurs in the 5 MHz region when transmitting
on the low end of 80 meters. I discovered this because the SWR wouldn't drop
with an external tuner. Early on I noticed that a different antenna
OK: here's one for all you audiophile Flexers! Maybe even W5GI!
I have a Heil GM-4 I bought second hand. It has a the HC-4 element in narrow
mode and the Pro element in wide mode. I also have the Heil Proset Plus
headset which switches between HC-5 and HC-4 elements. A local on 75 meters
told me
Gary,
I don't think Robin's problems are due to RFI. My previous post seemed to
indicate that. I have had that problem without actually while transmitting
with one particular firmware release that has been updated. These lock up
issues appeared after some firmware updates.
I've had a 756 PRO II
I've been looking at dual core motherboards based on Intel chipsets. I
understand only the Intel chipsets support the HPET feature. Does a
motherboard require an HPET setting in the bios to have HPET? I have seen
some dual core motherboards with Intel chipsets that don't have an HPET
enable /
: Eric Wachsmann [mailto:[EMAIL PROTECTED]
Sent: Sunday, November 18, 2007 7:53 AM
To: 'Steve Kallal'
Subject: RE: [Flexradio] High Res setting question...
There is a utility that you can run. I'll have to look it up when I'm back
in the office as I don't have it here. You might be able to find
Bob,
I really like the FlexProfiler, but am having a very basic problem. It
writes out the Path to Radio in the config.xml OK. But it doesn't read it
the next time I run FlexProfiler and overwrites it. That means I have to
manually set Path to Radio each time I run the program, even though it is
-Original Message-
From: [EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED] On Behalf Of Steve Kallal
Sent: Friday, November 16, 2007 8:21 AM
To: flexradio@flex-radio.biz
Subject: [Flexradio] 5000A won't fully return to receive...
I also had problems reaching phone tech support yesterday
Oops ignore last post. Forgot to paste the new text in!
I want to do a follow up to my post yesterday on my 5000A getting stuck and
requiring a power down / power up sequence, to get things going again.
I heard from Dudley yesterday. He called me back, once I actually left a
message, hi hi. I
How can I know if my PC has the proper timer to utilize the High Res in the
DSP|Keyer screen? I couldn't use this setting with the SDR-1000 and the
FA-66 sound card. But I can use it with the FLEX-5000A, but don't notice any
difference if it is checked. I suspect my PC doesn't support the setting.
I also had problems reaching phone tech support yesterday.
I've got a problem with my 5000A that is getting more frequent. It doesn't
return to receive fully. It gets stuck in a weird state where it can still
transmit, but it is like the receiver is disconnected from the antenna, or
the receiver
I wonder to what degree others have been successful with QSK on the 5000A. I
have been able to achieve degree of QSK acceptable for my personal tastes.
Many real CW aficionados like to hear between early dit and dah. Ten-Tec is
considered the master of QSK. I have not found my K2 to be as good at
I see a new version of the 5000 firmware 0.1.1.3 was released the other day.
What changes have been made?
73,
Steve N6VL
-- next part --
An HTML attachment was scrubbed...
URL:
I've followed this thread. But I don't have any of the symptons mentioned
here. I mainly been using it on CW and haven't noticed any break-in issues.
I've don't have any PTT problems either.
I am using SVN 1737 with the latest firmware 0.1.1.3. Hope I don't start to
experience the bug you guys
I've have tried to achieve 512 buffers at 96 kHz. I'm not using 192 kHz
because I want a sharper CW rx filter shape. 192 kHz would be OK for SSB,
but on CW the display is too compressed.
I can do 512 buffers at 96 kHz, but it gets unstable. CW break-in can crash
the system. The 5000A gets stuck
The latest FLEXX-5000A docs has a relay circuit added. That brings up a
question. Under what circumstances should I use a protection device on these
outputs? I had a pin go out on the SDR-1000, so I am hestitant to hook up a
device directly again.
What type of relay is used in the circuit added
I finally opened up my PC and found that I have a SIIG CyberPro 3 port
Firewire installed. I've looked on the Internet to find the chipset. It
seems that CyberPro applies to a lot of SIIG cards, and not all are
Firewire. The chip on the board has a SIIG CyberPro sticker on it.
I replaced it with
Oops, hit send before finishing! Ignore the earlier post.
I finally opened up my PC and found that I have a SIIG CyberPro 3 port
Firewire installed. I've looked on the Internet to find the chipset. It
seems that CyberPro applies to a lot of SIIG cards, and not all are
Firewire. The chip on the
in the shack? Do you have the 5000A ATU? Do you have an
external tuner?
Dale
Steve Kallal wrote:
Dale,
Thanks for reading this and replying.
In my first post, I meant to say the support team, versus the service
department could help me over the weekend.
The symptons occur on the lower
How many snap on chokes comes with the 5000A power cable? I was under the
desktop untangling a rats nest of cables and found a loose choke on the
floor that fell off the 5000A power cable. Is only one supplied, or is there
another one?
73,
Steve N6VL
-- next part --
I bought a Firewire card last year, when I got the SDR-1000. I don't
remember the brand and haven't opened the case to see any printing on the
card. Other than looking at the card itself, is there a way to determine the
chipset from a utility in Windows XP?
I am running the 5000A now, and wonder
I bought the Micro Innovations Firewire card several months ago, went I
bought the FA-66. I haven't installed it yet, but noticed it is confirmed to
work with the SDR-1000 and FLEX-5000A, but on Windows XP only. A check of
the Micro Innovations web site shows that it has the VIA chipset (from the
I've noticed my 5000A had difficultly getting a low SWR on 80 meters with a
manual antenna tuner. Yet I could get a low SWR with two other rigs. That
made me think that some other frequencies were being transmitted. I turned
on my 756PRO2 with its spectrum scope and sure enough I have a very
I am having problems with a bug (actually two bugs), when connected to the
rear key jack on the 5000A. The symptoms are hard to explain. The code often
doesn't match what my bug is sending. Often morse elements are skipped or
lengthened. I don't have the problem using my COM1 serial port. These
I have an MFJ-1026 that I am fond of, but haven't used lately. I wonder if
anyone has tried to use it with the RX1 loop feature of the 5000A. I think
it would be kind of neat to try the 1026 while bypassing the tx coax cable.
I'd like to use the T/R switching line on the 1026, although tx RF
I got my 5000A yesterday and did manage to get some sleep last night. Friday
would have been a better to get a new toy like this!
I used COM1 as my CW key input on the SDR-1000, where a COM port has a real
performance advantage. Which is the prefer key jack for the 5000A, the rear
or a COM port?
I experienced Kirb's description of the symptoms with SVN 1680 on an
SDR-1000. It definitely threw the level calibration off.
73,
Steve N6VL
-Original Message-
From: [EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED] On Behalf Of Eric Wachsmann
Sent: Wednesday, October 31, 2007 9:53 AM
To:
While waiting for my 5000A to come next week, I've been doing some reading.
It seems like a dual core processor has a real advantage for running the
5000A. I have a 2.6 GHz P4 PC with 1 GB RAM and have run the 1000 with it. I
even used it at 192 kHz, though it was a stretch. I went down to 96 kHz
Kirb,
Where are the separate tx and rx DSP buffers at in PowerSDR setup? I can't
find them!
73,
Steve N6VL
-Original Message-
From: [EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED] On Behalf Of Kirb Nesbitt
Sent: Wednesday, October 24, 2007 3:08 PM
To: flexradio@flex-radio.biz
Subject:
John,
So then a connection to between tip and sleeve is enough? Even with the ring
unconnected?
73,
Steve N6VL
-Original Message-
From: John P Basilotto W5GI [mailto:[EMAIL PROTECTED]
Sent: Friday, October 26, 2007 5:18 AM
To: 'Steve Kallal'; 'FlexRadio'
Subject: RE: [Flexradio] Heil
I have a 5000A in route and am thinking about the inter-connections before
it arrives.
Julius, W2IHY, made up a cable for me to connect my Heil GM-4 boom mike to
the SDR-1000. It included a 1/4 inch plug that plugs directly into the
Presonus Firebox or the FA-66. Are those connections considered
I wonder if the external COM port is still needed on the 5000A. On the
SDR-1000, the COM port is definitely needed for good keying response.
Ken, N9VV, perhaps you could answer this one.
73,
Steve N6VL
-- next part --
An HTML attachment was scrubbed...
URL:
I already asked Dudley about this, but I wondered if Bob or Eric could chime
in.
On my SDR-1000, I often use a straight key or bug at about 15 wpm. I notice
a perceptible delay in the sidetone when compared with other rigs such as a
K2 or PRO 2. The delay has been significantly minimized by
I am ready to upgrade my system to a dual core processor. I have been
attracted to Asus based on some comments I've seen on this reflector. I
don't know whether to go with an Intel or AMD processor. I am inclined to go
for the Intel because someone said the Intel's run cooler than the AMD's and
Hi,
I can't get SVN to respond. Is the server down?
73,
Steve N6VL
-- next part --
An HTML attachment was scrubbed...
URL:
http://mail.flex-radio.biz/pipermail/flexradio_flex-radio.biz/attachments/20070628/1a93ef49/attachment.html
I have a Vibroplex bug that I've been using with the SDR-1000. The problem
is a scratchy sidetone. This same bug does NOT has a scratchy sidetone on my
ICOM 756 PRO II. It didn't sound scratchy on 746 PRO at my local HRO store.
A local friend of mine did NOT hear scratchy dits on my signal when I
I have the K1EL WinKeyer USB with the standard outputs (not the HV option).
I can't get it to key the SDR-1000 through COM1. My COM1 is built into the
motherboard, rare these days, and works just fine with a straight key.
However Key1 output keeps the SDR-1000 keyed.
Ken, N9VV, has successfully
John,
I am hearing you in Southern California. You are in and out of the noise. I
am only running 100 watts here and I don't think you hear me.
I hope you try 20 meters later today. You might make it to 6 land.
73,
Steve N6VL
___
FlexRadio mailing
1 - 100 of 116 matches
Mail list logo
