ZS6AVM Wrote:
I don't remember how to get into the Calibration form for the
Flex-5000A
I seem to remember something like Ctrl P, or something like that, but
don't seem to be having any luck
Can someone provide the function keys to get into the Form
Keep on Flexin
Dave Scully
ZS6AVM Wrote:
I downloaded Jeff's June 2008 Console, and when installing I get an
error message saying that it is looking for Firmware Version 0.X.X
(something to that effect) and can only find 1.2.0.3
So I'm not sure if it is looking for an older version or what ??
Can anyone perhaps help
ZS6AVM Wrote:
I spoke to a friend in VK (VK7ZE) on 20M yesterday, he mentioned that
he'd spoken to a Ham in the States who was using the Wonder Radio (1Watt
version driving a 100W PA)
The conditions were poor so I couldn't get the call of the State Side
Station he had mentioned
I was
ZS6AVM Wrote:
Is this Curry Power, or Curry Powder J
They call it the WonderRadio, I guess one has to wonder if it works
J
Ignoring my comments above, I guess that apart from re-engineering, or
perhaps even back engineering, they have come up with wot is hopefully a
working SDR. Note, its
ZS6AVM Wrote:
I don't seem to be able to find the User Manual for Flexloader in the
Knowledge Base L
Please help,
Dave J
***
Disclaimer:
Denel (Pty) Ltd t/a Denel Aviation (Denel
ZS6AVM Wrote:
I believe that the review on the 5000A is out in QST
Is there a chance that this review will be posted to the Flex Website,
or would someone be able to scan the review and send it to me via email
J
Would be interesting to read
Many thanks
Dave
The only Flexer in South
Sorry to have messed ya'll around with my previous posting, I found the
Review on the Net, see the following site
http://www.wsplc.com/pdf/FLEX-5000A-review.pdf
Thanks Again
Dave
Zs6AVM
SAM wrote:
Anyone got an late model SDR-1000 for sale, with sound card
A friend of mine here in South Africa is looking for one
Please mail me with price if you have one for sale
Many thanks
Dave
ZS6AVM Wrote;
Here is a site for a 7 LCD Monitor
http://www.mp3playerstore.com/stuff_you_need/special/IN-700VG.htm
Do you think this would support PowerSDR full screen ?
Be seein ya
Dave
The specs are as follows:
Feature:
VGA port to connect to PC and laptops directly
+ 3 RCA Video
ZS6AVM Wrote:
Receiver my SDR-5000A last week, had to wait for my new PC to be built,
so only got the 5000A up and running yesterday
I looked through the Manual, but don't seem to see any way to set a
Delay for the (9) External Keying Lines (AMP RLY TX1, TX2 TX3)
On the SDR-1000 there is an
ZS6AVM Wrote :
I quote, Real Radios Don't Need Knobs, so is the SDR-5000C not a real radio ?
Further quote from the Flex Site ;
The FLEX-5000D™ includes everything that is in a FLEX-5000C, including the
integrated computer and adds features such as a 9 LCD display with touch
screen, 300 watt
ZS6AVM Wrote:
Just a BIG thanks to Robert W5RG for sending me his well earned Flex-5000 Cap
and T-Shirt !
Rob, greatly appreciated
Very best regards
Dave
ZS6AVM/3DA0VM
No virus found in this outgoing message.
Checked by AVG Free Edition.
Version: 7.5.503 / Virus Database: 269.15.0/1098 -
ZS6AVM Wrote:
Look out for me on 17M from 25 - 28 October 2007 from 3DA0
My Call sign will be 3DA0VM - that is 3 Delta Alpha Zero Victor Mike
Will only be on SSB !
Best time will be around 15:00 UTC on the Short Path
Best regards
Dave
ZS6AVM
No virus found in this outgoing message.
Checked
ZS6AVM Wrote:
All SVN's beyond 1649, even with a complete Database re-build are only giving
me about 40 Watts on 10M
Even if I manually set the 10M setting on the PA Table to 38, I still only see
about 40W
With SVN1649 and below, I see 100W on 10M
Any ideas ?
Best regards
Dave
ZS6AVM
No
ZS6AVM Wrote:
Should anyone be interested in working Swaziland on 17M, perhaps 12M, if there
is an opening, I'll be operating from Swaziland on these bands from 24 October,
2007 to 28 October, 2007
I going along with a group of Hams who will be working CQWW with the Call 3DA0WW
I'm awaiting my
ZS6AVM Wrote:
I know that this issue was discussed many months ago, I however don't remember
wot the remedy for it was
The problem is when you activate the Digital mode on the PowerSDR Console, and
then open MixW the Mode switches back to USB
I got around the issue by first opening MixW and
ZS6AVM Wrote:
The intention of my mail was not to stir up a hornets nest, nor was it intended
to know Flex Radio Systems
I believe that the SDR's are really great radio's, and I have been using my
SDR1000 from day one. I disposed of other rigs, e.g., FT1000MP IV field, TS780,
and Icom ProII
ZS6AVM Wrote:
Is the SRD-5000 series over priced ?
Well, in the eyes of many it may well be over priced !
Why do I say this ? – The concept of Software Defined Radio isn’t being
embraced by too many Amateur Radio operators, therefore the customer base is
extremely small, and competing with
ZS6AVM Wrote:
I'm pleased to see that the SDR-5000A is being heard on the Bands, I spoke with
my friend John (W5GI) on 20M, signals were not that great (5/7). even at that
signal John was sounding great
Now, I have a question, and perhaps there's a reason for this, there'll be an
SDR-5000A,
Yeah, perhaps ya'll don't have a B on the keyboards in Texas, even better,
I'm sure that ya'll are going send me a B model free of charge, so I can't do
all the Beta Testing out here in Africa, hi
The A,C, and D models are too expensive, the reserves in my Bank account are
very low
Be seein ya
ZS6AVM Wrote:
With regards the 10 Band EQ, I'd like to know wot the Band Widths are for
each of the EQ Bands (octave width) ?
I would have expected that the two critical frequencies as suggested by John
(NU9N) would have been incorporated (170hz and 650hz - if my memory serves me
correctly).
ZS6AVM Wrote ;
Many thanks to all who sent information with regards suppliers of these monitors
Greatly appreciated
Regards
Dave
No virus found in this outgoing message.
Checked by AVG Free Edition.
Version: 7.5.472 / Virus Database: 269.10.6/906 - Release Date: 17/07/2007
06:30 PM
Any takers for this posting ?
From: Dave Scully
Sent: 25 June 2007 02:49 PM
To: flexradio@flex-radio.biz
Subject: PA Mod on SDR-1000
ZS6AVM Wrote:
Has anyone done the PA mod on the SDR-1000, which increases the output
on the higher frequencies (21, 24, 28
ZS6AVM Wrote :
Sorry, in my previous posting regarding the dipped mica capacitor to
improve output on the higher frequencies, I meant to say 1200pf
capacitor
Regards
Dave
***
Disclaimer:
ZS6AVM Wrote:
Does anyone know what new features/enhancements in the SVN's apply to
the SDR-1000
Or are they mainly for the SDR-5000 ?
Would be nice to know what features actually are applicable to the
SDR-1000
Be seein ya, and keep on Flexin
Dave
ZS6AVM Wrote :
I to all, I have recently installed the Griffin Tuning Knob and it is
working just fine
I can change frequency and by depressing the Knob I can change the step
tuning
What I'd like to know is what other than changing to Frequency Step can
the Griffin be programmed to do ?
Best
ZS6AVM wrote :
Can someone perhaps provide information on setting up the SDR with VAC
(I assume), and perhaps extra audio connections to be able one to use
Spectra Plus to plot audio response of received stations
I need the info in paint by numbers sort of style, very detailed
please
Best
ZS6AVM Wrote:
It seems that this question was posed earlier this year, with no
apparent responses, so here goes ;
Below a posting from John - N7DME
John - N7DME
Mon, 29 Jan 2007 04:46:44 -0800
Has anyone tried using the Romac 10 band eq program with Power SDR and
VAC
software?
Can it be done?
ZS6AVM Wrote :
Has anyone configured the Cubase LE to operate with a Delta 44 Sound
Card
If so, can someone provide the connection details
Also, does this work as well as one can achieve using external audio
processing hardware
If this is possible, where can I get a free copy of Cubase LE ?
ZS6AVM Wrote:
For some time now, can't remember exactly how many SVN's back, I have
noticed some really high numbers when doing the Automatic RX Image
Rejection Routine from the Calibration Setup Menu, and then viewing the
results of the Calibration in the DSP Image Rejection Setup Menu
I can't
ZS6AVM Wrote:
Many thanks to all those who responded to me directly with regards the
above topic
Last evening I installed SVN 879
Usually after installing a new SVN, I import the Database when prompted.
With this SVN, I decided not to import the database, ran through the
initial setup and
ZS6AVM Wrote :
Last nite I installed Vac 3.12, and Vcom, and got Mixw working
I find that the switching from Tx back to Rx is very slow
I'm not at home at the moment, but have a feeling that it may have
something to do with the buffer settings
I'll try reducing the buffer sizes when I get home.
ZS6AVM Wrote:
Thanks for the replies with regards the slow switching in MixW, I sorted
that out, finger trouble on my part, sorry to have wasted space on the
reflector
My next question would probably be answered by John (W5GI), so here goes
;
I see that VAC is now available in the Mode
ZS6AVM Wrote:
This is something which I've been meaning to ask for a long time now,
and kinda keep forgetting to do so
When running the Audio Test in the Test Menu, I find that one channel
is louder than the other
I wonder if this is a sound card issue, or if there is some way of
equalising the
ZS6AVM Wrote :
Thanks so much for all the responses
I will see if I can find the recommended contact cleaner
DetoxIT/Progold locally, or perhaps something similar
I'm of the opinion that the poor contact may be as a result of
oxidization as the SDR and audio cables are not ever moved, and the
ZS6AVM Wrote:
Best wishes to ya'll for 2007
I had a Flex to Flex contact with a station in Italy, and he was
surprised when I told him that I too was on an SDR-1000
Anyhow, I'm still a little confused with regards how the buffer sizes
affect the quality of the audio (if it actually does). Apart
ZS6AVM Wrote:
Anyone experiencing problems with their SDR's with high static levels
(rain static) which knocks the SDR out
I have found that with rain static the SDr drops out, even with the NB
activated
Another problems which I'm experiencing even with a new PC, is the
matter of the Console
ZS6AVM Wrote:
First of, thank you to all who replied to my posting regarding the high
static levels, and the power-up issue
The SDR was bought in around June 2006, so it should have the mods as
suggested
I'm not using USB, normal parallel cable
I only have the 100W PA, no tuner, or transverter
ZS6AVM Wrote :
I have just got XP Pro X64 Edition on my PC running an AMD 64 Athlon CPU
I downloaded a Beta 64bit Driver for the Delta 44 card, and eventually
got it installed
I have looked on the M-Audio Site, and that is the only driver (Beta)
that seems to run under 64 OS systems
Has anyone
ZS6AVM Wrote :
Hi to all, yeah, once again, after sorting out a grounding problem which
was causing RX drop-out when running the Amp, and going from TX to RX
(causing the RX to go deaf), has presented its self yet again
I had to install a new Mother Board and CPU, and since doing that I now
have
ZS6AVM Wrote:
Thanks for the responses with regards the installation of the Delta 44
Drivers
I will do a proper uninstall, and then re-install and see if that works.
I have a feeling that I should have done that, and not install over the
already installed driver
Another thing for Tim, if you
ZS6AVM Wrote:
Another problem that someone may be able shed some light upon
Yesterday I was tuning up my Amp on 17M, and suddenly the High SWR
warning come up on the Console, and the power output cut back
I have never experienced this before, as there is NO SWR problem, the
SDR is seeing 1:1
ZS6AVM wrote:
I have raised this issue some time back !
When starting PowerSDR (The Console) it switches off, even if I restart
the Console, by clicking the On Button, it will switch on again, and
then after a few seconds it'll switch off. The only way that it seems to
stabilise is to close the
ZS6AVM Wrote;
I thought that I'd share some findings with the Group
Ever since I got my SDR I was experiencing drop-out when going from TX
to RX, and especially so when running an Amplifier
That was when keying the Amp from the prescribed pins in the X2
Connector
I tried everything, even used
ZS6AVM wrote :
I installed VAC 3.12, and got MixW working
However, with VAC activated in PowerSDR, I have no Mic Audio on TX
If I de-select VAC in PowerSDR, then the Mic Audio on TX works fine
Can anyone offer any advise
Best regards
Dave (ZS6AVM)
ZS6AVM Wrote :
I'm not sure if this problem is unique to my setup, anyhow here goes ;
When I select the edge type meter display in the PowerSDR Menu, I find
that on TX I have no meter indication, it works fine in RX
The regular bar type meter works just fine in TX
Anyone else seeing this, or is
ZS6AVM Wrote:
The SAM lock on Jeff's Console works really well, in line with other
comments posted, it really does a great job of pulling in those off
frequency AM stations
I'm hoping that SAM Lock will be programmed into the Flex Console,
whether it is developed further, or not !
I'll take it
Thanks once again for the upload to your Site Brian, I have mailed you
direct, however thought it appropriate to thank you on the Reflector
Like all (well, I hope all) Flexers, getting new Releases is something
to look forward to, and really makes my day
Be seein ya, and keep on Flexin'
Dave
ZS6AVM Wrote:
I'm using PowerSDR SVN 659, thanks to Brian (W5AMI), who uploaded it to
his Site
SVN 659 is working without any glitches
Where are we now with Releases (SVN's), and if possible is there a
chance of getting an upload to your Site Brian, or is someone else
perhaps willing to post the
ZS6AVM Wrote:
I downloaded NET Framework Version 2, and installed it, only to find
that PowerSDR presented an error message, indicating the I would have to
close PowerSDR
My PC is running XP Pro with service pack 2
I wonder if anyone else has perhaps had a similar experience with NET
Framework
Sorry John
I see that provision has been made for new-comers (Getting Started), so
that is great, and essential
Dave
-Original Message-
From: [EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED] On Behalf Of
[EMAIL PROTECTED]
Sent: 04 September 2006 07:00 PM
To: flexradio@flex-radio.biz
ZS6AVM Wrote :
Thanks for the Playback Level Control, works great. However, the Level
defaults to 0, would be nice the user pre-set was saved
Its not a serious issue, but every time I want to Palyback, I have to
re-set my level
I will add, whilst PowerSDR is open and the level set, it remains
ZS6AVM Wrote:
Thanks very much Brian (W5AMI), your efforts are greatly appreciated !
I have downloaded SVN659, and will install when I get home today
The problem with TortoiseSVN is that our Firewall will not permit
connection to the Site. I did speak to our IT Dept, and they say that
there is
ZS6AVM Wrote :
Perhaps this question has been posed sometime ago, however if anyone who
has details in respect of the following, could you please respond
directly to my email address [EMAIL PROTECTED]
Over the weekend I connected and configured my Iambic Key to the SDR,
and it works just
I believe that no matter wot GUI look is eventually developed, we will
never satisfy everyone. There will be many who will be over the moon,
and many who will be disappointed. It is going to a difficult task to
satisfy everyone, not to mention all the programming that its going to
take to get a
12. Amplifier Keying Problem ([EMAIL PROTECTED])
Dave (ZS6AVM) wrote ;
After posting my mail regarding the Amplifier Keying Problem, I decided
to try using one of the other Pins (1 - 6). I disconnected the wire to
Pin 7, and re-connected it to Pin 1, and guess wot, everything is
working just
I've had my SDR-1000 for 3 weeks now, and have not been able to resolve
an issue with regards keying my Amplifier
Initially I connected my Amp keying line to Pins 7 and 15 on X2. As soon
as I switch the Amp Control Circuit on (no RF), the Amp would
immediately key (my Amp keys fine with all my
57 matches
Mail list logo