Re: [Flexradio] Unable to get an acceptable Tx audio -- Additional information

2006-04-27 Thread John Basilotto
To: John Basilotto Subject: Re: [Flexradio] Unable to get an acceptable Tx audio John Basilotto wrote: Although many have reported the same results below, the truth is the Heil mics will work just fine plugged directly into the D44. The setup process is as follows: 1. set the Delta 44

[Flexradio] Unable to get an acceptable Tx audio

2006-04-26 Thread Jerry Harley
Compaq 2.4 EVO, New SDR1000, M-Audio D44, Hosa cables, Heil goldline/hc5, Yaesu/Heil cord. My best audio is at mic gain 50, but mic meter never reads better than 25. If i turn the mic gain to 55 I can get -22 but the transmit audio has a lot of ehco. With just key down,no audio I'm seeing

Re: [Flexradio] Unable to get an acceptable Tx audio

2006-04-26 Thread Tim Ellison
: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Jerry Harley Sent: Wednesday, April 26, 2006 8:29 PM To: FlexRadio@flex-radio.biz Subject: [Flexradio] Unable to get an acceptable Tx audio Compaq 2.4 EVO, New SDR1000, M-Audio D44, Hosa cables, Heil goldline/hc5, Yaesu/Heil cord. My best

Re: [Flexradio] Unable to get an acceptable Tx audio

2006-04-26 Thread John Basilotto
] [mailto:[EMAIL PROTECTED] Behalf Of Tim Ellison Sent: Wednesday, April 26, 2006 8:08 PM To: Jerry Harley; FlexRadio@flex-radio.biz Subject: Re: [Flexradio] Unable to get an acceptable Tx audio The D44 does not have a mic preamp like the Firebox. You will get the best results using a mic preamp