Hi
For few days now I have my FLEX 3000 and going through Manual and
KBfirst normaly
CW, my first contact with HAM radio long time ago, than MixW
Reading Harolds post, made me try SSB xmitsame simptoms ! Since I
couldn`t find details
(with mbe PrtScr) of what to expect on Panadap
Hi
I should list folowing:
-using SDR v 1.18.1
- MIC is HEiL that comes with F3K
Regards
Joe, S53SX
___
FlexRadio Systems Mailing List
FlexRadio@flex-radio.biz
http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz
Archives: http:
Hi Jim. I am running powersdr 1.18.1 with my 5000a using vista 64 bit - by
and large it is working just fine without any problems. I'm using com0com
and virtual audio cable. It is necessary to disable driver signing as
mentioned in various places but that is a trivial thing. I'm running Ham
Radio D
One option is to use a foot switch for PTT.
-Tim
-Original Message-
From: flexradio-boun...@flex-radio.biz
[mailto:flexradio-boun...@flex-radio.biz] On Behalf Of Les Keppie
Sent: Tuesday, June 30, 2009 1:50 AM
To: flexradio@flex-radio.biz; Erik VK4AES
Subject: [Flexradio] [Fwd: de VK4AE
MON function in SSB started to work only after I checked Mic Boost in
other modes tried, worked UFB...I am realy no `opera singer` and usualy don´t
yell in mike, but mbe expected ´more lively respond´ ...
What is your mic gain setting on the front console? You need to adjust the mic
gain
You can use the PC loudspeakers by activating the VAC and use the Audio
repeater utility to run the VAC audio to the windows mixer , no extra
cables, easy ... .
Kind regards
Jean-marc F1HDI
Brian Lloyd écrit :
Last week I was teaching my students how to run the Flex 3000. One of the
diff
It is saying TRIAL
--- On Tue, 6/30/09, Mark Lunday wrote:
> From: Mark Lunday
> Subject: [Flexradio] SDR 1.8.1, hearing voices going out over digital mode
> (yes this sounds crazy...)
> To: "'FlexRadio List'"
> Date: Tuesday, June 30, 2009, 12:34 AM
> SDR 1.8.1, MixW 2.18, CAT and PTT
> wor
There may be a problem with delay
--- On Tue, 6/30/09, jmb...@teaser.fr wrote:
> You can use the PC loudspeakers by
> activating the VAC and use the Audio repeater utility to run
> the VAC audio to the windows mixer , no extra cables, easy
_
This speaker thread is a difficult one for someone like me whose
interest in electronics started with "Hi Fi" in 1951 to follow. When I
found out that this "thing" called an SDR that I had ordered didn't
have any serious audio capabilities I simply ressurrected an old
stereo amp along with sp
I am having the same preamp problem as WI3Z with my F3K. There is a relay click
when going in and out of the preamp with no reception on the "pre" setting. Any
ideas guys? Charlie K5JYB
___
FlexRadio Systems Mailing List
FlexRadio@flex-radio.biz
http:/
Burt,
I thought the same thing, so I tried it, & there is no discernible delay.
I normally use my PC speakers with my FLEX-5000A by connecting a stereo
cable from the PWR SPKR LINE OUT jack on the F5K to the Line In jack on the
PC. Leaving the cable connected, I turned on the VAC Audio Repeater
For anyone having an issue with the FLEX-3000 preamp, please contact
Dudley (supp...@flex-radio.com) so he can run some diagnostic tests to
triage the problem. FYI, he is in an all day meeting today and will not
be answering e-mails until later this evening.
-Tim
---
W4TME
FlexRadio Systems -
I use the foot switch with the HM5 and it works like a champ...does not
leave an impression on the foot! I have an F5K and use the front panel jack
with the Yeasu adapter.
Cheers,
Leon, N5PU
___
FlexRadio Systems Mailing List
FlexRadio@flex-radio.bi
I also got a Q8200 based computer recently - my Flex 5000a with RX2
typically runs 5-7% CPU utilization on it, so I think you will be
satisfied with the computer part of the station. Mine (Model vxq2
from Systemax [TigerDirect]) came with Vista Business with XP Pro
downgrade built in. I am runn
On Tue, Jun 30, 2009 at 6:19 AM, STORMYX wrote:
> I use the foot switch with the HM5 and it works like a champ...does not
> leave an impression on the foot! I have an F5K and use the front panel jack
> with the Yeasu adapter.
It is funny but I have yet to hook up PTT for my mic(s). When using
pho
I built a great push button that plugs into the foot switch jack for my flex
that I use with my thumb, this may be a problem though if you are holding
the Mic instead of having it in a Mic stand.
The push button I built consisted of one of the Radio Shack LARGE Body
diameter 1/4" Plug (it mates to
The Tokyo Hy-Power amp switches bands by monitoring the serial port for
Kenwood, Icom, or Yaesu commands. So connecting the THP amp to the CAT port
will allow the THP amp to set bands automatically. If that is a problem, my
N4PY software has a second serial port that supports this amp and sens
Boy I may be dating myself, but way back when...we all used regular elogated
type doorbell switches.
under the desk edge, glued to a piece of plastic on top of the desk, we just
laid our hand on it.
Just remember not to carelessly throw the headset onto the desk.
I use the one under the edge of
Boy I may be dating myself, but way back when...we all used regular elogated
type doorbell switches.
under the desk edge, glued to a piece of plastic on top of the desk, we just
laid our hand on it.
Just remember not to carelessly throw the headset onto the desk.
I use the one under the edge of
I'm using a foot switch (sustain pedal) from a music keyboard with good
results. It's much more rugged than most of those I've seen for the
amateur market.
One word of caution, though - make sure you get one that can be set up
for a normally open circuit. The On Stage Stands unit I have can be
I use a household rocker switch mounted in a little black plastic box.
Touch on and touch off... no need to hold it down.
See it near my right hand.
http://ve3efc.ca
--
Doug McCormack
VE3EFC
___
FlexRadio Systems Mailing List
FlexRadio@flex-radio.biz
h
I notice that one of the stated improvements in the current new PSDR 1.18.1 is
called "Frequency Calibration Improvements."
Is there a new procedure or method with PSDR 1.18.1 to calibrate the Flex 5K
frequency accuracy against WWV ?? Or is the Frequency Calibration procedure
the same as list
It is the same frequency calibration process that has always been in PowerSDR
(Setup->General->Calibration) for any radio hardware platform. The algorithm
has been improved significantly to calibrate with WWV.
The routines in the KB are for extra fine tuning of the DDS to get within Hz of
bein
I prefer a foot switch. The one I'm using is a "Linemaster" switch meant for
use with a drill press. It weighs about 10 pounds, and does NOT move around
under my desk!
Jim KQ6EA
--- On Tue, 6/30/09, Doug McCormack wrote:
From: Doug McCormack
Subject: [Flexradio] PTT switch
To: flexradio@flex
Tim Ellison pravi:
MON function in SSB started to work only after I checked Mic Boost in
other modes tried, worked UFB...I am realy no `opera singer` and usualy don´t
yell in mike, but mbe expected ´more lively respond´ ...
What is your mic gain setting on the front console? You need to
Hello All,
Grainger Industrial Supply carry several very nice heavy duty foot switches at
reasonable (and unresaonable) prices considering what your getting. Several of
us Flex users in the area use this switch:
Grainger #2w810, by Linemaster #T-91-S, $15.05
http://www.grainger.com/Grainger/
I use a foot switch I bought a few years ago from a music store. There were
several to pick from and they are solid and only about $10 for a good one.
Carl Moreschi N4PY
121 Little Bell Drive
Bell Mountain
Hays, NC 28635
www.n4py.com
- Original Message -
From: "Jim Jerzycke"
To: ;
My "Monster Stomper" is this one:
http://www.grainger.com/Grainger/items/5KX05
I'll probably wear out long before the switch does!
Jim
--- On Tue, 6/30/09, radio...@frontiernet.net wrote:
From: radio...@frontiernet.net
Subject: Re: [Flexradio] PTT switch
To: "Jim Jerzycke"
Cc: flexradio@flex-r
Check the Mixer controls too (in the title bar)
-Tim
-Original Message-
From: flexradio-boun...@flex-radio.biz
[mailto:flexradio-boun...@flex-radio.biz] On Behalf Of Joze Kovacic
Sent: Tuesday, June 30, 2009 1:44 PM
To: flexradio@flex-radio.biz
Subject: Re: [Flexradio] PS: 3000 - Need
Sori for the mess in prev. post..
Tim Ellison pravi:
MON function in SSB started to work only after I checked Mic Boost
in other modes tried, worked UFB...I am realy no `opera singer`
and usualy don´t yell in mike, but mbe expected ´more lively respond´ ...
What is your mic gain sett
I also have seen weird things with the preamp. For the most part I can't see
any difference when changing it from one setting to another. Either that or
it's such a small difference you cannot tell.
I have written Dudley but since he is tied up all day, as Tim mentioned, I
wondered if an
Tim Ellison pravi:
Check the Mixer controls too (in the title bar)
-Tim
Check
Mixer in/outs opened full, void Flex Wire In !
I´m expecting Dudleys finds with Harolds setup...everything is working
so fab that my issue gotabe something I keep making wrong
I ´ll kill database and go
The symptom I've experienced with the 3000 is the preamp in the preamp
position causes ~s9 noise floor to come up and no signals heard where
noise floor was normally s0/1 and signals heard with preamp off - this
is on all bands.
-Larry
On Jun 30, 2009, at 11:17 AM, Harold Rosee wrote:
Here's a good one. A little bit pricey but worth every penny. 7 inches wide,
5.5 inches deep less than 2 inches tall max, and solid cast iron. 3 pounds and
doesn't skid. I use 2 of them in the shack.
http://cgi.ebay.com/ws/eBayISAPI.dll?ViewItem&item=7547008593&ssPageName=ADME:B:EOIBSA:US:11
Line master foot switches will last almost forever. The place I worked at in
high-school (1965~1969) had half a dozen or so that were old back then. A few
years ago I went back "home", and stopped in to see how my former mentor's
business was doing. The SAME switches were still in use! How do I
Used and new nurse call buttons on eBay can be a good alternative if you
don't want a foot switch.
N4BFD
___
FlexRadio Systems Mailing List
FlexRadio@flex-radio.biz
http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz
Archives: http://www
Any one running a Command HF-2500 AMP connected to a Flex5000?
When I push the PTT on the Flex, it activates the amp, but does NOT unkey the
amp. when I release the PTT. The radio goes to the receive mode.
Probably something to do with t he Darlington circuit in the Flex.The amp has a
r
You can always steal the one off your wife's sewing machine and run like hell,
assuming you have a wife and that she can sew
Bill AD5OL
- Original Message
From: Jesse N4BFD
Cc: FlexRadioReflector
Sent: Tuesday, June 30, 2009 3:03:44 PM
Subject: Re: [Flexradio] PTT switch
U
Fellow Flex'rs
I have 2 remaining preamps ( that are not spoke for...maybe a few more if $
doesn't show) for 6 meters that I made for the Flex 5000a Rx loop one is
.32dbnf and the other is .31 dbnf.
I will not be making any more for quite awhile.
These are to be sold at $75 each + ship
I think I saw this also, and addressed it by fiddling with the AF and AGC-T
controls.
Mark Lunday
WD4ELG
wd4...@arrl.net
http://wd4elg.net
-Original Message-
From: flexradio-boun...@flex-radio.biz
[mailto:flexradio-boun...@flex-radio.biz] On Behalf Of Tim (W4TME)
Sent: Tuesday, June 30,
Larry,
I just found this:
http://kc.flex-radio.com/KnowledgebaseArticle50144.aspx
It explains the preamp operation compared to a Legacy radio preamp. It also
talks about recalibration which may be your problem.
I am starting to understand that this radio cannot be compared to a
Thanks to everyone who has emailed me concerning the Flex and the Tokyo amp. I
think I have the answer now. Thanks again to all of you guys.
Jim AB2CD
___
FlexRadio Systems Mailing List
FlexRadio@flex-radio.biz
http://mail.flex-radio.biz/mailman/listi
A flex 3000 will be used for the ONTARS net on July 12th and will be viewed
by the Many participants at the Ontario Hamfest in Milton Ontario.
The Net Frequency is 3.755 MHz and will be active from 6.00 am to at least
1.30 Pm.
Hosted by the Burlington Amateur Radio club we look forward to seeing
I use a foot switch from a 1950's dentist chairworks great Dale KC2PZ
At 10:53 AM 6/30/2009, Jim Barber wrote:
I'm using a foot switch (sustain pedal) from a music keyboard with
good results. It's much more rugged than most of those I've seen for
Yes, that is what I run here. However, I use the Ameritron ARB-704 interface.
No issues what so ever. Standard set up.
Joe WC4R
www.rothweb.net
www.WilliamsburgWX.com
www.wc4r.com
-Original Message-
From: flexradio-boun...@flex-radio.biz
[mailto:flexradio-boun...@flex-radio.biz] On
Hi fellow flexers again,
I was interested to read the comments from the class room from Brian
WB6RQN. Good name that Brian. It is always interesting to hear feedback
from someone who is using his Flex in somewhat different circumstances.
In my case, my Flex 5000 is permanently mounted in my
I had substantial delay but my computer is not the best
--- On Tue, 6/30/09, Ray Andrews, K9DUR wrote:
> From: Ray Andrews, K9DUR
> Subject: RE: [Flexradio] Connecting ordinary loudspeakers to the Flex 3000
> and Flex 5000
> To: "'Burt'" , flexradio@flex-radio.biz
> Date: Tuesday, June 30, 20
To All,
I never got a reply from the reflector but continued to experiment. I
found that I'm able to use both the KY command and my USB Winkeyer
with DM780 to send flawless CW if I run PowerSDR 1.18.1 instead of
alpha version 1.19.0 SVN 3105.
73,
...Gary,K8EHB
On Thu, Jun 25, 2009 at 10:18 PM,
By far the most informative and creative foot switch thread I have
seen. Cool! I like it. By the by, I use the Heil HM-5 with my F5K and
wound up adding the Heil classic stand with PTT switch to save my
fingers. The foot switch is still on my Collins gear.
Bob KF6BC
On Jun 30, 2009, at 1:03
I've just upgraded the Flex PC and now have my Siig 1 serial, 1 parallel PCI
board for sale. I'll include disk with latest XP and Vista (both 32 and 64
bit) drivers. The Vista drivers work in Windows 7.
Perfect for PCs without a serial or parallel port. I used it to drive a
serial CI-V adapter f
50 matches
Mail list logo