Andy Ross writes:
One exacerbating factor that I noticed is that the Cub we model has a
*monster* elevator. Holding the aircraft at its stall AoA requires
only 35% back stick. Is that really correct? I changed the lift
parameter on the hstab from 1.7 to 1.3 and seemed to get better
Andy,
With the latest YASim changes, the J3 Cub won't converge for me (and
others.) I get the following:
Finally initializing fdm
Start common FDM init
...initializing position...
...initializing ground elevation to -0.000431126ft...
...initializing sea-level radius...
lat = 37.6117 alt =
Curtis L. Olson wrote:
With the latest YASim changes, the J3 Cub won't converge for me (and
others.)
Confirmed. Sorry, I didn't test this one.
Any ideas?
No, sadly. A quick spot check shows that it fails for pretty much all
sane configuration changes. And the thing that *should* return it
I wrote:
Curtis L. Olson wrote:
With the latest YASim changes, the J3 Cub won't converge for me (and
others.)
Confirmed. Sorry, I didn't test this one.
OK, fixed. The model was almost converging, but wasn't getting close
enough to the threshold. It was oscillating around the right
