Re: [fossil-users] Questions about the settings command

2011-05-28 Thread Arjen Markus
Hi Richard,

thanks, that clarifies things - I will use this to
update the online documentation.

Regards,

Arjen

On Fri, 27 May 2011 10:50:30 -0400
  Richard Hipp d...@sqlite.org wrote:
 On Fri, May 27, 2011 at 3:01 AM, Arjen Markus 
arjen.mar...@deltares.nlwrote:
 
 Hello,

 I am (slowly) adapting the online help, trying to 
clarify the concepts
 that fossil uses and to accommodate the online help for 
both novice
 intermediate users.

 I came across a few things that are not quite clear to 
me in the
 settings command. So, if someone can enlighten me, I 
would
 appreciate that:

 - auto-shun: What is meant by shunning in this 
context?

 
 http://www.fossil-scm.org/fossil/doc/trunk/www/shunning.wiki
 
 

 - mtime-changes: If it is turned off, what does fossil 
do then?
  Compare the contents (which will have 
an impact
  on performance no doubt)?

 
 Correct.  With mtime-changes off, Fossil compares the 
files byte-by-byte to
 see if they have changed.  That works ok for smaller 
projects, but slows
 things down when you start to get into thousands of 
files.
 
 

 The flag -global for the settings command seems a bit 
out of
 sync with the other options: wouldn't --global be more 
appropriate?

 
Fossil ignores the number of - before an option.  One 
or two work the
 same.  For consistency in the documentation, change 
-global to --global.
 
 

 Regards,

 Arjen


 DISCLAIMER: This message is intended exclusively for the 
addressee(s) and
 may contain confidential and privileged information. If 
you are not the
 intended recipient please notify the sender immediately 
and destroy this
 message. Unauthorized use, disclosure or copying of this 
message is strictly
 prohibited.
 The foundation 'Stichting Deltares', which has its seat 
at Delft, The
 Netherlands, Commercial Registration Number 41146461, is 
not liable in any
 way whatsoever for consequences and/or damages resulting 
from the improper,
 incomplete and untimely dispatch, receipt and/or content 
of this e-mail.




 ___
 fossil-users mailing list
 fossil-users@lists.fossil-scm.org
 http://lists.fossil-scm.org:8080/cgi-bin/mailman/listinfo/fossil-users

 
 
 
 -- 
 D. Richard Hipp
 d...@sqlite.org

 

DISCLAIMER: This message is intended exclusively for the addressee(s) and may 
contain confidential and privileged information. If you are not the intended 
recipient please notify the sender immediately and destroy this message. 
Unauthorized use, disclosure or copying of this message is strictly prohibited.
The foundation 'Stichting Deltares', which has its seat at Delft, The 
Netherlands, Commercial Registration Number 41146461, is not liable in any way 
whatsoever for consequences and/or damages resulting from the improper, 
incomplete and untimely dispatch, receipt and/or content of this e-mail.




___
fossil-users mailing list
fossil-users@lists.fossil-scm.org
http://lists.fossil-scm.org:8080/cgi-bin/mailman/listinfo/fossil-users


[fossil-users] Questions about the settings command

2011-05-27 Thread Arjen Markus
Hello,

I am (slowly) adapting the online help, trying to clarify the concepts
that fossil uses and to accommodate the online help for both novice
intermediate users.

I came across a few things that are not quite clear to me in the
settings command. So, if someone can enlighten me, I would
appreciate that:

- auto-shun: What is meant by shunning in this context?

- mtime-changes: If it is turned off, what does fossil do then?
  Compare the contents (which will have an impact
  on performance no doubt)?

The flag -global for the settings command seems a bit out of
sync with the other options: wouldn't --global be more appropriate?

Regards,

Arjen
 

DISCLAIMER: This message is intended exclusively for the addressee(s) and may 
contain confidential and privileged information. If you are not the intended 
recipient please notify the sender immediately and destroy this message. 
Unauthorized use, disclosure or copying of this message is strictly prohibited.
The foundation 'Stichting Deltares', which has its seat at Delft, The 
Netherlands, Commercial Registration Number 41146461, is not liable in any way 
whatsoever for consequences and/or damages resulting from the improper, 
incomplete and untimely dispatch, receipt and/or content of this e-mail.




___
fossil-users mailing list
fossil-users@lists.fossil-scm.org
http://lists.fossil-scm.org:8080/cgi-bin/mailman/listinfo/fossil-users


Re: [fossil-users] Questions about the settings command

2011-05-27 Thread Stephan Beal
On Fri, May 27, 2011 at 9:01 AM, Arjen Markus arjen.mar...@deltares.nlwrote:

 - mtime-changes: If it is turned off, what does fossil do then?

 Compare the contents (which will have an impact
  on performance no doubt)?


Yes, it does a comparison of some sort (hash codes?). mtime-changes was
added later on, IRRC, to improve speed for the common use case.

i unfortunately can't say anything useful in regards to your other
questions.

-- 
- stephan beal
http://wanderinghorse.net/home/stephan/
___
fossil-users mailing list
fossil-users@lists.fossil-scm.org
http://lists.fossil-scm.org:8080/cgi-bin/mailman/listinfo/fossil-users


Re: [fossil-users] Questions about the settings command

2011-05-27 Thread Richard Hipp
On Fri, May 27, 2011 at 3:01 AM, Arjen Markus arjen.mar...@deltares.nlwrote:

 Hello,

 I am (slowly) adapting the online help, trying to clarify the concepts
 that fossil uses and to accommodate the online help for both novice
 intermediate users.

 I came across a few things that are not quite clear to me in the
 settings command. So, if someone can enlighten me, I would
 appreciate that:

 - auto-shun: What is meant by shunning in this context?


http://www.fossil-scm.org/fossil/doc/trunk/www/shunning.wiki



 - mtime-changes: If it is turned off, what does fossil do then?
  Compare the contents (which will have an impact
  on performance no doubt)?


Correct.  With mtime-changes off, Fossil compares the files byte-by-byte to
see if they have changed.  That works ok for smaller projects, but slows
things down when you start to get into thousands of files.



 The flag -global for the settings command seems a bit out of
 sync with the other options: wouldn't --global be more appropriate?


Fossil ignores the number of - before an option.  One or two work the
same.  For consistency in the documentation, change -global to --global.



 Regards,

 Arjen


 DISCLAIMER: This message is intended exclusively for the addressee(s) and
 may contain confidential and privileged information. If you are not the
 intended recipient please notify the sender immediately and destroy this
 message. Unauthorized use, disclosure or copying of this message is strictly
 prohibited.
 The foundation 'Stichting Deltares', which has its seat at Delft, The
 Netherlands, Commercial Registration Number 41146461, is not liable in any
 way whatsoever for consequences and/or damages resulting from the improper,
 incomplete and untimely dispatch, receipt and/or content of this e-mail.




 ___
 fossil-users mailing list
 fossil-users@lists.fossil-scm.org
 http://lists.fossil-scm.org:8080/cgi-bin/mailman/listinfo/fossil-users




-- 
D. Richard Hipp
d...@sqlite.org
___
fossil-users mailing list
fossil-users@lists.fossil-scm.org
http://lists.fossil-scm.org:8080/cgi-bin/mailman/listinfo/fossil-users