RE: Changed Section and Subsection Numbers

[William W. Saylor, PE]

Harvey,

 

I had a similar problem on a ~10 chapter book. One or two of the chapters
would never get the formatting right even though each template was the same
and each chapter had the Format - Document - Numbering (and Page) set
properly. It was only when I would do Book Updates that the formatting and
page sequencing would be properly forced.

Bill

 

From: framers-boun...@lists.frameusers.com
[mailto:framers-boun...@lists.frameusers.com] On Behalf Of Craig Ede
Sent: Wednesday, June 26, 2013 11:41 AM
To: Harvey Rosenfeld; framers
Subject: RE: Changed Section and Subsection Numbers

 

It may be as simple as going into the Paragraph tab in the numbering for
that section and changing that to Continue numbering from Previous file
(don't recall the selection exactly).
 
The numbering is a delicate interaction between a number of settings.
Usually putting your content into the containers provided by the template
(and removing overrides from any of the numbered paragraph tags) will fix
problems. (Of course, that assumes you have a good template.)
 
It is NOT usually a good idea to start trying this and that setting while
hoping for the best.
 
Craig
 

  _  

From: hrose...@ansi.org
To: framers@lists.frameusers.com
Subject: Changed Section and Subsection Numbers
Date: Tue, 25 Jun 2013 20:39:15 +

Framers: I need your help. In a multi-section book, my section and
subsection numbers in section 2 reverted from 2, 2.1, 2.2, etc. to 1, 1.1,
1.2, etc. I don't know why this happened; I didn't (knowingly) do anything
to this chapter. This section did read 2, 2.1, 2.2 this morning. I went into
Format - Document - Numbering and tried to fix the Chapter, Section, and
Sub-section tabs in Numbering Properties, but nothing is working. Section
2's numbering remains 1, 1.1, 1.2. Luckily, this glitch has not affected the
section and subsection numbers in any of the other chapters in this book. I
could use some step-by-step instructions on how to get the section numbers
to convert back to 2, 2.1, 2.2. 

 

___


You are currently subscribed to framers as arch...@mail-archive.com.

Send list messages to framers@lists.frameusers.com.

To unsubscribe send a blank email to
framers-unsubscr...@lists.frameusers.com
or visit 
http://lists.frameusers.com/mailman/options/framers/archive%40mail-archive.com

Send administrative questions to listad...@frameusers.com. Visit
http://www.frameusers.com/ for more resources and info.

Changed Section and Subsection Numbers

[William W. Saylor, PE]

Harvey,



I had a similar problem on a ~10 chapter book. One or two of the chapters
would never get the formatting right even though each template was the same
and each chapter had the Format - Document - Numbering (and Page) set
properly. It was only when I would do Book Updates that the formatting and
page sequencing would be properly "forced".

Bill



From: framers-boun...@lists.frameusers.com
[mailto:framers-bounces at lists.frameusers.com] On Behalf Of Craig Ede
Sent: Wednesday, June 26, 2013 11:41 AM
To: Harvey Rosenfeld; framers
Subject: RE: Changed Section and Subsection Numbers



It may be as simple as going into the Paragraph tab in the numbering for
that section and changing that to "Continue numbering from Previous file"
(don't recall the selection exactly).

The numbering is a delicate interaction between a number of settings.
Usually putting your content into the containers provided by the template
(and removing overrides from any of the numbered paragraph tags) will fix
problems. (Of course, that assumes you have a good template.)

It is NOT usually a good idea to start trying this and that setting while
hoping for the best.

Craig


  _  

From: hrose...@ansi.org
To: framers at lists.frameusers.com
Subject: Changed Section and Subsection Numbers
Date: Tue, 25 Jun 2013 20:39:15 +

Framers: I need your help. In a multi-section book, my section and
subsection numbers in section 2 reverted from 2, 2.1, 2.2, etc. to 1, 1.1,
1.2, etc. I don't know why this happened; I didn't (knowingly) do anything
to this chapter. This section did read 2, 2.1, 2.2 this morning. I went into
Format - Document - Numbering and tried to fix the Chapter, Section, and
Sub-section tabs in Numbering Properties, but nothing is working. Section
2's numbering remains 1, 1.1, 1.2. Luckily, this glitch has not affected the
section and subsection numbers in any of the other chapters in this book. I
could use some step-by-step instructions on how to get the section numbers
to convert back to 2, 2.1, 2.2. 



-- next part --
An HTML attachment was scrubbed...
URL: 

RE: Page Count and Numbering Properties Not Working?

[William W. Saylor, PE]

I have had a similar problem from time to time with FM10. I have found that
after setting each chapter that forcing a book update seems to grind
through and make things work. It also identifies some other errors that have
to be fixed before continuing.

Bill

 



Monument Satellite Systems, Inc.

William W. Saylor, PE(v) 719 481-0433

20075 Promontory Way   (mob) 719 373-3770

Monument, CO 80132  

wsay...@earthlink.net

 

 

 

 

From: framers-boun...@lists.frameusers.com
[mailto:framers-boun...@lists.frameusers.com] On Behalf Of Karen Robbins
Sent: Friday, May 24, 2013 4:07 PM
To: framers@lists.frameusers.com
Subject: Page Count and Numbering Properties Not Working?

 

From time to time, files whose pagination was set to Delete Empty Pages have
inexplicably changed to Make Page Count Even, resulting in an extra blank
page at the end of any file with an odd number of pages. This hasn't
happened in a long time--maybe not since I installed FM11--but it reared its
ugly head again today.

Also, changing the Numbering Properties setting to Continue Numbering from
Previous Page in Book doesn't work at all. Not only doesn't the book
renumber on update (despite an alert telling me that book numbers and
document numbers don't agree so Frame is going to use book numbers--at least
that's what I think it means), but on next view the radio button for this
option is deselected and the one for manual page number entry is
re-selected. (Yes, I'm certain I selected the right radio button, clicked
Set, and saved each file before this happened.)

Seems odd that pagination is not behaving on two counts at the same time.

Thanks for any help.

--Karen

___


You are currently subscribed to framers as arch...@mail-archive.com.

Send list messages to framers@lists.frameusers.com.

To unsubscribe send a blank email to
framers-unsubscr...@lists.frameusers.com
or visit 
http://lists.frameusers.com/mailman/options/framers/archive%40mail-archive.com

Send administrative questions to listad...@frameusers.com. Visit
http://www.frameusers.com/ for more resources and info.

Page Count and Numbering Properties Not Working?

[William W. Saylor, PE]

I have had a similar problem from time to time with FM10. I have found that
after "setting" each chapter that forcing a book "update" seems to grind
through and make things work. It also identifies some other errors that have
to be fixed before continuing.

Bill





Monument Satellite Systems, Inc.

William W. Saylor, PE(v) 719 481-0433

20075 Promontory Way   (mob) 719 373-3770

Monument, CO 80132  

wsaylor at earthlink.net









From: framers-boun...@lists.frameusers.com
[mailto:framers-bounces at lists.frameusers.com] On Behalf Of Karen Robbins
Sent: Friday, May 24, 2013 4:07 PM
To: framers at lists.frameusers.com
Subject: Page Count and Numbering Properties Not Working?



>From time to time, files whose pagination was set to Delete Empty Pages have
inexplicably changed to Make Page Count Even, resulting in an extra blank
page at the end of any file with an odd number of pages. This hasn't
happened in a long time--maybe not since I installed FM11--but it reared its
ugly head again today.

Also, changing the Numbering Properties setting to Continue Numbering from
Previous Page in Book doesn't work at all. Not only doesn't the book
renumber on update (despite an alert telling me that book numbers and
document numbers don't agree so Frame is going to use book numbers--at least
that's what I think it means), but on next view the radio button for this
option is deselected and the one for manual page number entry is
re-selected. (Yes, I'm certain I selected the right radio button, clicked
"Set", and saved each file before this happened.)

Seems odd that pagination is not behaving on two counts at the same time.

Thanks for any help.

--Karen

-- next part --
An HTML attachment was scrubbed...
URL: 
<http://lists.frameusers.com/pipermail/framers/attachments/20130524/7fa147e3/attachment.html>

attach Caption to floating Anchored Frame

[William W. Saylor, PE]

I suspect this is another dumb question:

I am using FM10 on Win7 writing a multi-chapter technical book. Is there a
simple way to attach a following caption to an anchored frame when I let the
anchored frame float? I use the auto-numbering of the figures and
auto-referencing to the Captions extensively. 

Thanks,

Bill

___


You are currently subscribed to framers as arch...@mail-archive.com.

Send list messages to framers@lists.frameusers.com.

To unsubscribe send a blank email to
framers-unsubscr...@lists.frameusers.com
or visit 
http://lists.frameusers.com/mailman/options/framers/archive%40mail-archive.com

Send administrative questions to listad...@frameusers.com. Visit
http://www.frameusers.com/ for more resources and info.

attach Caption to floating Anchored Frame

[William W. Saylor, PE]

I suspect this is another dumb question:

I am using FM10 on Win7 writing a multi-chapter technical book. Is there a
simple way to attach a following caption to an anchored frame when I let the
anchored frame float? I use the auto-numbering of the figures and
auto-referencing to the Captions extensively. 

Thanks,

Bill

-- next part --
An HTML attachment was scrubbed...
URL: 

cannot generate PDF

[William W. Saylor, PE]

Bodvar, Art, and many others



   For whatever value it may have, and to thank all who helped,
the source of my Adobe PDF problem was:

-It was not one of the several imported graphics

-In the text of the document there was an opening ?(? in a variable
that somehow was coded as Vijaya font. It was not visible and, as a legal FM
font, caused no errors in the font pod.

-I saved the offending page and ?bisected? the text until I found
the nugget that would not print.

-I assume there are some number of legal FM fonts that might give
the same error. 

Thanks again,

Bill 



From: B??var Bj?rgvinsson [mailto:bod...@gmail.com] 
Sent: Thursday, February 14, 2013 2:21 AM
To: wsaylor at earthlink.net
Cc: FrameUsers List
Subject: Re: cannot generate PDF



Hi Bill,



The most usual thing here, as most have suggested, is that a corrupt graphic
on or next to the problematic pages is causing this. However, as the error
message mentions Encoding, I would also look at the fonts on these pages. Is
there any text (or an entity for holding text) on these pages that could be
using a corrupt font, not used earlier in the document or a letter from such
font not used earlier? You might have to look at the MIF file to see this.



Hope you find the cure. :-)



Bodvar Bjorgvinsson





<https://lh3.googleusercontent.com/-ikef3gCrA3g/UIsF1sJlTvI/Bik/zEqY
CbBxQdA/s167/SignEmail.ai.png> 







On Tue, Feb 12, 2013 at 6:21 PM, William W. Saylor, PE
 wrote:

I am trying to generate a PDF output on a chapter of a book in FM10 and I
get error messages in the log that are not very helpful to me. Here is the
offending part of the log:



%%[Page: 15]%%

%%[Page: 16]%%

%%[Page: 17]%%

%%[ Error: typecheck; OffendingCommand: ifelse ]%%



Stack:

{F}

{--dup-- /Encoding --get-- --dup-- StandardEncoding --eq-- {--pop-- T}

{{ISOLatin1Encoding} --stopped-- {--pop-- F} {--eq--} --ifelse--

{T} {--dup-- --begin-- T 32 1 127 {Encoding 1 --index-- --get--

StandardEncoding 3 -1 --roll-- --get-- --eq-- --and--} --for-- --end--}

--ifelse--} --ifelse--}

265

-dict-

/0

0

/F11

265

/TT110t00

0





%%[ Flushing: rest of job (to end-of-file) will be ignored ]%%

%%[ Warning: PostScript error. No PDF file produced. ] %%

I cannot find any errors on the page in  the document. Does this make sense
to anyone?



Thanks,

Bill



Saylor Solutions, Inc.

William W. Saylor, PE(v) 719 481-0433 <tel:719%20481-0433> 

20075 Promontory Way   (mob) 719 373-3770 <tel:719%20373-3770> 

Monument, CO 80132  

wsaylor at earthlink.net




___


You are currently subscribed to framers as bodvar at gmail.com.

Send list messages to framers at lists.frameusers.com.

To unsubscribe send a blank email to
framers-unsubscribe at lists.frameusers.com
or visit
http://lists.frameusers.com/mailman/options/framers/bodvar%40gmail.com

Send administrative questions to listadmin at frameusers.com. Visit
http://www.frameusers.com/ for more resources and info.



-- next part --
An HTML attachment was scrubbed...
URL: 
<http://lists.frameusers.com/pipermail/framers/attachments/20130214/9dd92fc6/attachment.html>

cannot generate PDF

[William W. Saylor, PE]

I am trying to generate a PDF output on a chapter of a book in FM10 and I
get error messages in the log that are not very helpful to me. Here is the
offending part of the log:



%%[Page: 15]%%

%%[Page: 16]%%

%%[Page: 17]%%

%%[ Error: typecheck; OffendingCommand: ifelse ]%%

 

Stack:

{F}

{--dup-- /Encoding --get-- --dup-- StandardEncoding --eq-- {--pop-- T}

{{ISOLatin1Encoding} --stopped-- {--pop-- F} {--eq--} --ifelse--

{T} {--dup-- --begin-- T 32 1 127 {Encoding 1 --index-- --get--

StandardEncoding 3 -1 --roll-- --get-- --eq-- --and--} --for-- --end--}

--ifelse--} --ifelse--}

265

-dict-

/0

0

/F11

265

/TT110t00

0

 

 

%%[ Flushing: rest of job (to end-of-file) will be ignored ]%%

%%[ Warning: PostScript error. No PDF file produced. ] %%

I cannot find any errors on the page in  the document. Does this make sense
to anyone?

 

Thanks,

Bill

 

Saylor Solutions, Inc.

William W. Saylor, PE(v) 719 481-0433

20075 Promontory Way   (mob) 719 373-3770

Monument, CO 80132  

wsay...@earthlink.net

 

___


You are currently subscribed to framers as arch...@mail-archive.com.

Send list messages to framers@lists.frameusers.com.

To unsubscribe send a blank email to
framers-unsubscr...@lists.frameusers.com
or visit 
http://lists.frameusers.com/mailman/options/framers/archive%40mail-archive.com

Send administrative questions to listad...@frameusers.com. Visit
http://www.frameusers.com/ for more resources and info.

RE: cannot generate PDF

[William W. Saylor, PE]

Art,

 

   This is FM10 on a WIN7 machine. I am using the Save As to
generate the PDF. I could print the chapter successfully to my local HP
OfficeJet and every other chapter works just fine making a PDF. The page in
question has about five images (MathType equations come in as images) but
they look no different from the hundreds of other images. I think I am using
the Adobe that comes with FM. I ultimately need PDF files for the publisher
and every other chapter works fine.

Bill

 

 

From: framers-boun...@lists.frameusers.com
[mailto:framers-boun...@lists.frameusers.com] On Behalf Of Art Campbell
Sent: Wednesday, February 13, 2013 7:03 AM
To: framers@lists.frameusers.com
Subject: Re: cannot generate PDF

 

What Jeff asked -- tell us about your system set up: OS / FM version and
patch level / Acrobat version and patch, and how you're trying to create the
PDF. In particular, if you get the same results printing to the Adobe
Acrobat logical printer as when you use SaveAs PDF (which I wouldn't
recommend).

Art




Art Campbell
art.campb...@gmail.com
  ... In my opinion, there's nothing in this world beats a '52 Vincent and
a redheaded girl. -- Richard Thompson
  No disclaimers apply.
   DoD 358

I support www.TheGrotonLine.com, hyperlocal news for Groton MA.

 

On Wed, Feb 13, 2013 at 8:49 AM, Jeff Coatsworth
jeff.coatswo...@jonassoftware.com wrote:

Are you printing to the Adobe PDF printer instance or using Save As PDF? Is
it working for any other docs or are they all busted? Do you have the full
Acrobat version or just the headless one that ships with FM?

 

  _  

From: framers-boun...@lists.frameusers.com
[mailto:framers-boun...@lists.frameusers.com] On Behalf Of William W.
Saylor, PE
Sent: Tuesday, February 12, 2013 1:22 PM
To: framers@lists.frameusers.com
Subject: cannot generate PDF

I am trying to generate a PDF output on a chapter of a book in FM10 and I
get error messages in the log that are not very helpful to me. Here is the
offending part of the log:



%%[Page: 15]%%

%%[Page: 16]%%

%%[Page: 17]%%

%%[ Error: typecheck; OffendingCommand: ifelse ]%%

 

Stack:

{F}

{--dup-- /Encoding --get-- --dup-- StandardEncoding --eq-- {--pop-- T}

{{ISOLatin1Encoding} --stopped-- {--pop-- F} {--eq--} --ifelse--

{T} {--dup-- --begin-- T 32 1 127 {Encoding 1 --index-- --get--

StandardEncoding 3 -1 --roll-- --get-- --eq-- --and--} --for-- --end--}

--ifelse--} --ifelse--}

265

-dict-

/0

0

/F11

265

/TT110t00

0

 

 

%%[ Flushing: rest of job (to end-of-file) will be ignored ]%%

%%[ Warning: PostScript error. No PDF file produced. ] %%

I cannot find any errors on the page in  the document. Does this make sense
to anyone?

 

Thanks,

Bill

 

Saylor Solutions, Inc.

William W. Saylor, PE(v) 719 481-0433

20075 Promontory Way   (mob) 719 373-3770 tel:719%20373-3770 

Monument, CO 80132  

wsay...@earthlink.net

 


___


You are currently subscribed to framers as art.campb...@gmail.com.

Send list messages to framers@lists.frameusers.com.

To unsubscribe send a blank email to
framers-unsubscr...@lists.frameusers.com
or visit
http://lists.frameusers.com/mailman/options/framers/art.campbell%40gmail.com

Send administrative questions to listad...@frameusers.com. Visit
http://www.frameusers.com/ for more resources and info.

 

___


You are currently subscribed to framers as arch...@mail-archive.com.

Send list messages to framers@lists.frameusers.com.

To unsubscribe send a blank email to
framers-unsubscr...@lists.frameusers.com
or visit 
http://lists.frameusers.com/mailman/options/framers/archive%40mail-archive.com

Send administrative questions to listad...@frameusers.com. Visit
http://www.frameusers.com/ for more resources and info.

RE: cannot generate PDF

[William W. Saylor, PE]

Thanks for all of the suggestions. So far printing to Adobe PDF as a printer
gives me the same error as the SaveAs PDF. So I will start tearing apart the
offending page and see if I can determine the source. 

Bill

 

From: framers-boun...@lists.frameusers.com
[mailto:framers-boun...@lists.frameusers.com] On Behalf Of Art Campbell
Sent: Wednesday, February 13, 2013 12:38 PM
To: Theresa de Valence
Cc: framers@lists.frameusers.com
Subject: Re: cannot generate PDF

 

A few others in the forum are likely to disagree but I think it sucks.
:-) 

There have always been issues with it over the years and releases, so much
so that I just quit using it myself (still have to use it to debug for
others) in the FM7 time frame because it was too buggy. It has always used
an arcane interface that, when it works, uses a totally different method of
specking and creating the PDF file than printing to the Acrobat logical
printer instance. It is much improved in the 11 release, but I still haven't
gotten into the habit of using it at all. 

I follow the KISS principle and just print to the Acrobat printer. It's more
controllable and more stable, IMHO than its evil twin.

Bottom line is if the SaveAs PDF isn't working for you, try printing to the
Acrobat printer instead; it's become a basic debugging step to determine if
the problem is in the output generation or in the files.

Cheers,
Art



Art Campbell
art.campb...@gmail.com
  ... In my opinion, there's nothing in this world beats a '52 Vincent and
a redheaded girl. -- Richard Thompson
  No disclaimers apply.
   DoD 358

I support www.TheGrotonLine.com, hyperlocal news for Groton MA.

 

On Wed, Feb 13, 2013 at 2:11 PM, Theresa de Valence t...@bstw.com wrote:

On 2/13/2013 8:02 AM, Art Campbell wrote:

In particular, if you get the same results printing
to the Adobe Acrobat logical printer as when you use SaveAs PDF
(which I wouldn't recommend).

 

Art,

Are you saying that SaveAs PDF is not good?

Theresa

 

___


You are currently subscribed to framers as arch...@mail-archive.com.

Send list messages to framers@lists.frameusers.com.

To unsubscribe send a blank email to
framers-unsubscr...@lists.frameusers.com
or visit 
http://lists.frameusers.com/mailman/options/framers/archive%40mail-archive.com

Send administrative questions to listad...@frameusers.com. Visit
http://www.frameusers.com/ for more resources and info.

cannot generate PDF

[William W. Saylor, PE]

Art,



   This is FM10 on a WIN7 machine. I am using the Save As to
generate the PDF. I could print the chapter successfully to my local HP
OfficeJet and every other chapter works just fine making a PDF. The page in
question has about five images (MathType equations come in as images) but
they look no different from the hundreds of other images. I think I am using
the Adobe that comes with FM. I ultimately need PDF files for the publisher
and every other chapter works fine.

Bill





From: framers-boun...@lists.frameusers.com
[mailto:framers-bounces at lists.frameusers.com] On Behalf Of Art Campbell
Sent: Wednesday, February 13, 2013 7:03 AM
To: framers at lists.frameusers.com
Subject: Re: cannot generate PDF



What Jeff asked -- tell us about your system set up: OS / FM version and
patch level / Acrobat version and patch, and how you're trying to create the
PDF. In particular, if you get the same results printing to the Adobe
Acrobat logical printer as when you use SaveAs PDF (which I wouldn't
recommend).

Art




Art Campbell
art.campbell at gmail.com
  "... In my opinion, there's nothing in this world beats a '52 Vincent and
a redheaded girl." -- Richard Thompson
  No disclaimers apply.
   DoD 358

I support www.TheGrotonLine.com, hyperlocal news for Groton MA.



On Wed, Feb 13, 2013 at 8:49 AM, Jeff Coatsworth
 wrote:

Are you printing to the Adobe PDF printer instance or using Save As PDF? Is
it working for any other docs or are they all busted? Do you have the full
Acrobat version or just the headless one that ships with FM?



  _  

From: framers-boun...@lists.frameusers.com
[mailto:framers-bounces at lists.frameusers.com] On Behalf Of William W.
Saylor, PE
Sent: Tuesday, February 12, 2013 1:22 PM
To: framers at lists.frameusers.com
Subject: cannot generate PDF

I am trying to generate a PDF output on a chapter of a book in FM10 and I
get error messages in the log that are not very helpful to me. Here is the
offending part of the log:



%%[Page: 15]%%

%%[Page: 16]%%

%%[Page: 17]%%

%%[ Error: typecheck; OffendingCommand: ifelse ]%%



Stack:

{F}

{--dup-- /Encoding --get-- --dup-- StandardEncoding --eq-- {--pop-- T}

{{ISOLatin1Encoding} --stopped-- {--pop-- F} {--eq--} --ifelse--

{T} {--dup-- --begin-- T 32 1 127 {Encoding 1 --index-- --get--

StandardEncoding 3 -1 --roll-- --get-- --eq-- --and--} --for-- --end--}

--ifelse--} --ifelse--}

265

-dict-

/0

0

/F11

265

/TT110t00

0





%%[ Flushing: rest of job (to end-of-file) will be ignored ]%%

%%[ Warning: PostScript error. No PDF file produced. ] %%

I cannot find any errors on the page in  the document. Does this make sense
to anyone?



Thanks,

Bill



Saylor Solutions, Inc.

William W. Saylor, PE(v) 719 481-0433

20075 Promontory Way   (mob) 719 373-3770 <tel:719%20373-3770> 

Monument, CO 80132  

wsaylor at earthlink.net




___


You are currently subscribed to framers as art.campbell at gmail.com.

Send list messages to framers at lists.frameusers.com.

To unsubscribe send a blank email to
framers-unsubscribe at lists.frameusers.com
or visit
http://lists.frameusers.com/mailman/options/framers/art.campbell%40gmail.com

Send administrative questions to listadmin at frameusers.com. Visit
http://www.frameusers.com/ for more resources and info.



-- next part --
An HTML attachment was scrubbed...
URL: 
<http://lists.frameusers.com/pipermail/framers/attachments/20130213/5b0c49e4/attachment.html>

cannot generate PDF

[William W. Saylor, PE]

Thanks for all of the suggestions. So far printing to Adobe PDF as a printer
gives me the same error as the SaveAs PDF. So I will start tearing apart the
offending page and see if I can determine the source. 

Bill



From: framers-boun...@lists.frameusers.com
[mailto:framers-bounces at lists.frameusers.com] On Behalf Of Art Campbell
Sent: Wednesday, February 13, 2013 12:38 PM
To: Theresa de Valence
Cc: framers at lists.frameusers.com
Subject: Re: cannot generate PDF



A few others in the forum are likely to disagree but I think it sucks.
:-) 

There have always been issues with it over the years and releases, so much
so that I just quit using it myself (still have to use it to debug for
others) in the FM7 time frame because it was too buggy. It has always used
an arcane interface that, when it works, uses a totally different method of
specking and creating the PDF file than printing to the Acrobat logical
printer instance. It is much improved in the 11 release, but I still haven't
gotten into the habit of using it at all. 

I follow the KISS principle and just print to the Acrobat printer. It's more
controllable and more stable, IMHO than its evil twin.

Bottom line is if the SaveAs PDF isn't working for you, try printing to the
Acrobat printer instead; it's become a basic debugging step to determine if
the problem is in the output generation or in the files.

Cheers,
Art



Art Campbell
art.campbell at gmail.com
  "... In my opinion, there's nothing in this world beats a '52 Vincent and
a redheaded girl." -- Richard Thompson
  No disclaimers apply.
   DoD 358

I support www.TheGrotonLine.com, hyperlocal news for Groton MA.



On Wed, Feb 13, 2013 at 2:11 PM, Theresa de Valence  wrote:

On 2/13/2013 8:02 AM, Art Campbell wrote:

In particular, if you get the same results printing
to the Adobe Acrobat logical printer as when you use SaveAs PDF
(which I wouldn't recommend).



Art,

Are you saying that SaveAs PDF is not good?

Theresa



-- next part --
An HTML attachment was scrubbed...
URL: 

cannot generate PDF

[William W. Saylor, PE]

I am trying to generate a PDF output on a chapter of a book in FM10 and I
get error messages in the log that are not very helpful to me. Here is the
offending part of the log:



%%[Page: 15]%%

%%[Page: 16]%%

%%[Page: 17]%%

%%[ Error: typecheck; OffendingCommand: ifelse ]%%



Stack:

{F}

{--dup-- /Encoding --get-- --dup-- StandardEncoding --eq-- {--pop-- T}

{{ISOLatin1Encoding} --stopped-- {--pop-- F} {--eq--} --ifelse--

{T} {--dup-- --begin-- T 32 1 127 {Encoding 1 --index-- --get--

StandardEncoding 3 -1 --roll-- --get-- --eq-- --and--} --for-- --end--}

--ifelse--} --ifelse--}

265

-dict-

/0

0

/F11

265

/TT110t00

0





%%[ Flushing: rest of job (to end-of-file) will be ignored ]%%

%%[ Warning: PostScript error. No PDF file produced. ] %%

I cannot find any errors on the page in  the document. Does this make sense
to anyone?



Thanks,

Bill



Saylor Solutions, Inc.

William W. Saylor, PE(v) 719 481-0433

20075 Promontory Way   (mob) 719 373-3770

Monument, CO 80132  

wsaylor at earthlink.net



-- next part --
An HTML attachment was scrubbed...
URL: 
<http://lists.frameusers.com/pipermail/framers/attachments/20130212/73269671/attachment.html>

enlarge equation box in FM10

[William W. Saylor, PE]

Is there a way to enlarge the equation box?

 



Saylor Solutions, Inc.

William W. Saylor, PE(v) 719 481-0433

20075 Promontory Way   (mob) 719 373-3770

Monument, CO 80132  

wsay...@earthlink.net

 

___


You are currently subscribed to framers as arch...@mail-archive.com.

Send list messages to framers@lists.frameusers.com.

To unsubscribe send a blank email to
framers-unsubscr...@lists.frameusers.com
or visit 
http://lists.frameusers.com/mailman/options/framers/archive%40mail-archive.com

Send administrative questions to listad...@frameusers.com. Visit
http://www.frameusers.com/ for more resources and info.

enlarge equation box in FM10

[William W. Saylor, PE]

Is there a way to enlarge the equation box?





Saylor Solutions, Inc.

William W. Saylor, PE(v) 719 481-0433

20075 Promontory Way   (mob) 719 373-3770

Monument, CO 80132  

wsaylor at earthlink.net



-- next part --
An HTML attachment was scrubbed...
URL: 
<http://lists.frameusers.com/pipermail/framers/attachments/20130204/cbc6c377/attachment.html>

RE: FrameMaker 10 does not start (licensing expired)

[William W. Saylor, PE]

Anjaneai,

 

   I appreciate the attempts at help but resetting the clock on
your computer, particularly if you are tied into a critical network, is one
the absolutely stupidest things to do. The unintended consequences are,
literally, indefinable.

Bill

 

From: framers-boun...@lists.frameusers.com
[mailto:framers-boun...@lists.frameusers.com] On Behalf Of Anjaneai S
Sent: Tuesday, January 01, 2013 2:41 PM
To: Tammy Van Boening
Cc: framers@lists.frameusers.com
Subject: Re: FrameMaker 10 does not start (licensing expired)

 

Hi All,

I feel sorry for the inconvenience to all of you.

I am working to see if I can provide you a solution.
Meanwhile, you all can work by the step two in the article, i.e. to reset
your clock to a previous date of 2012.

I hope to update you all tomorrow.

Thanks,
Anjaneai

On Wed, Jan 2, 2013 at 2:17 AM, Tammy Van Boening
tamm...@spectrumwritingllc.com wrote:

Also, just talked to a colleague and she gets this same message when she
opens FM 10 on her desktop (and it was installed as part of the TCS suite.)
It appears to be any FM10 user.

 

TVB

 

From: framers-boun...@lists.frameusers.com
[mailto:framers-boun...@lists.frameusers.com] On Behalf Of Tammy Van Boening
Sent: Tuesday, January 01, 2013 1:23 PM


Cc: framers@lists.frameusers.com
Subject: RE: FrameMaker 10 does not start (licensing expired)

 

I am sure that it is everyone who has FM 10, regardless if it is part of a
suite or standalone. I have a longtime client and I access a virtual PC on
their network and on this virtual PC FM 10 is installed as a standalone
product. I just logged into the virtual PC and attempted to open FM 10 and
get the same lousy message. Installing FM 11 as a workaround is not an
option as this is not my PC, but my client's. I wouldn't dare install any
other SW w/out their permission first.

 

TVB

 

From: framers-boun...@lists.frameusers.com
[mailto:framers-boun...@lists.frameusers.com] On Behalf Of Tammy Van Boening
Sent: Tuesday, January 01, 2013 12:39 PM
To: 'Anjaneai S'
Cc: framers@lists.frameusers.com
Subject: RE: FrameMaker 10 does not start (licensing expired)

 

Anjaneai,

 

I went to the site indicated by the link below and attempted Solution 2,
even though I have standalone Framemaker. It was not installed as part of an
application suite.  When I attempt to Deactivate, and then Deactivate
Permanently, I receive the message Please connect to the internet to
deactivate and I AM connected to the internet. I am unable to deactivate my
account at all, so I am unable to attempt Solution #2.  Also, I did stop and
then restart the FlexNet Licensing Services and that did not work either.
Like others on this, I am unable to use Framemaker 10.

 

TVB

 

 

 

From: framers-boun...@lists.frameusers.com
[mailto:framers-boun...@lists.frameusers.com] On Behalf Of Anjaneai S
Sent: Tuesday, January 01, 2013 3:47 AM
To: Shlomo Perets
Cc: framers@lists.frameusers.com; techsho...@yahoogroups.com
Subject: Re: FrameMaker 10 does not start (licensing expired)

 

Hi Shlomo,

First of all, a very Happy New Year to all dear Framers!

Can you please try the steps suggested here -
http://helpx.adobe.com/creative-suite/kb/error-licensing-product-expired-cs4
.html

Also, please go to start - run - launch - services.msc and look for 'Flexnet
Licensing Service' and restart/start the service.

Please share me your findings.

Good luck!

Thanks,
Anjaneai

On Jan 1, 2013 3:06 PM, Shlomo Perets shlo...@microtype.com wrote:


As of this morning, when starting FM10 a message indicating licensing
expired shows up, and the program would not run.
(likely related to the change of year -- best wishes for 2013!)

Other FM10 users in different locations encountered a similar problem.

The Adobe chat representative suggested contacting Adobe tech support by
phone, where I (expectedly) got a closed for the holiday message.

FM11, FM9 and FM8 do start as expected. 


Shlomo Perets

MicroType, http://www.microtype.com http://www.microtype.com/  
FrameMaker/Acrobat/Captivate training  consulting * FM-to-Acrobat
TimeSavers/Assistants 


___


You are currently subscribed to framers as anjan...@gmail.com.

Send list messages to framers@lists.frameusers.com.

To unsubscribe send a blank email to
framers-unsubscr...@lists.frameusers.com
or visit
http://lists.frameusers.com/mailman/options/framers/anjaneai%40gmail.com

Send administrative questions to listad...@frameusers.com. Visit
http://www.frameusers.com/ for more resources and info.


___


You are currently subscribed to framers as anjan...@gmail.com.

Send list messages to framers@lists.frameusers.com.

To unsubscribe send a blank email to
framers-unsubscr...@lists.frameusers.com
or visit
http://lists.frameusers.com/mailman/options/framers/anjaneai%40gmail.com

Send administrative questions to listad...@frameusers.com. Visit
http://www.frameusers.com/ for more resources 

RE: on Adobe site: FrameMaker 10 does not start (licensing expired

[William W. Saylor, PE]

My experience:


Zipfile Did NOT work on 64-bit, Windows 7, FM10. Error message is Could not
update FrameMaker 10 license: attempt to write a readonly Database. Which
database file is it so I can change properties?

Thanks,

Bill

 

 

From: framers-boun...@lists.frameusers.com
[mailto:framers-boun...@lists.frameusers.com] On Behalf Of Lebbink, Belinda
Sent: Wednesday, January 02, 2013 6:47 AM
To: 'framers@lists.frameusers.com'
Subject: FIX: on Adobe site: FrameMaker 10 does not start (licensing
expired

 

Hello,

 

First the best wishes for you all.

 

I've got the same problem, but there is a better and quicker solution than
manupilating data.

The problem is known by Adobe and they working on it. 

It has something to do with the CS5 license.

 

The blog with the link to fixed this:
http://blogs.adobe.com/techcomm/2013/01/update-on-the-issue-of-framemaker-10
-not-launching.html

 

Good luck.

 

With kind regards,

 

Belinda Lebbink

 

___


You are currently subscribed to framers as arch...@mail-archive.com.

Send list messages to framers@lists.frameusers.com.

To unsubscribe send a blank email to
framers-unsubscr...@lists.frameusers.com
or visit 
http://lists.frameusers.com/mailman/options/framers/archive%40mail-archive.com

Send administrative questions to listad...@frameusers.com. Visit
http://www.frameusers.com/ for more resources and info.

on Adobe site: FrameMaker 10 does not start ("licensing expired"

[William W. Saylor, PE]

My experience:


Zipfile Did NOT work on 64-bit, Windows 7, FM10. Error message is "Could not
update FrameMaker 10 license: attempt to write a readonly Database". Which
database file is it so I can change properties?

Thanks,

Bill





From: framers-boun...@lists.frameusers.com
[mailto:framers-bounces at lists.frameusers.com] On Behalf Of Lebbink, Belinda
Sent: Wednesday, January 02, 2013 6:47 AM
To: 'framers at lists.frameusers.com'
Subject: FIX: on Adobe site: FrameMaker 10 does not start ("licensing
expired"



Hello,



First the best wishes for you all.



I've got the same problem, but there is a better and quicker solution than
manupilating data.

The problem is known by Adobe and they working on it. 

It has something to do with the CS5 license.



The blog with the link to fixed this:
http://blogs.adobe.com/techcomm/2013/01/update-on-the-issue-of-framemaker-10
-not-launching.html



Good luck.



With kind regards,



Belinda Lebbink



-- next part --
An HTML attachment was scrubbed...
URL: 

RE: FrameMaker 10 does not start (licensing expired)

[William W. Saylor, PE]

Shlomo,

 

   Thank you for the suggestion about using a trial FM11 as a
temporary(?) solution. I have an immediate need to get two installs running
and will attempt. If Adobe was serious about FM then existing FM10 users
would get a no-cost upgrade to FM11.

Bill

 

From: framers-boun...@lists.frameusers.com
[mailto:framers-boun...@lists.frameusers.com] On Behalf Of Shlomo Perets
Sent: Tuesday, January 01, 2013 11:59 AM
To: Scott Prentice
Cc: Shlomo Perets; framers@lists.frameusers.com
Subject: Re: FrameMaker 10 does not start (licensing expired)

 

Scott Prentice wrote:




I'm seeing this problem as well.

Unfortunately, I don't think this will be something that can be resolved by
Adobe fixing something in their licensing services. Before starting FM10
this morning, I disconnected from the Internet to test whether this is a
local issue or from phoning home. Since I got this message (and FM10 won't
start) with no Internet connection, it seems like a local application issue.
I'm thinking that they will need to deliver a patch for FM10 to fix this.
Hopefully we'll hear from someone on this soon.

Happy New Year!

...scott


Thanks for your additional insight, Scott!  Seems logical. Those who need to
use FM10 until a patch is available (if indeed needed) can install FM11 as a
trial version, and save as FM10 when FM10 can be used again.

When various FM10 bugs were discussed in the list a while back, FM11 was
mentioned as the patch for FM9/10 (for a fee), but that's a different story
;-)

[ Two years ago or so I encountered the licensing expired problem when
installing TCS2 on a new computer. The only real fix then, after spending
many chat/phone hours with all kinds of solution attempts, was to get a
new serial number from Adobe's representatives in Israel at the time. The
old serial number was absolutely valid on the previous computer or when
tested in other computers with de-activation. ]

Shlomo




___


You are currently subscribed to framers as arch...@mail-archive.com.

Send list messages to framers@lists.frameusers.com.

To unsubscribe send a blank email to
framers-unsubscr...@lists.frameusers.com
or visit 
http://lists.frameusers.com/mailman/options/framers/archive%40mail-archive.com

Send administrative questions to listad...@frameusers.com. Visit
http://www.frameusers.com/ for more resources and info.

FrameMaker 10 does not start ("licensing expired")

[William W. Saylor, PE]

Shlomo,



   Thank you for the suggestion about using a trial FM11 as a
temporary(?) solution. I have an immediate need to get two installs running
and will attempt. If Adobe was serious about FM then existing FM10 users
would get a no-cost upgrade to FM11.

Bill



From: framers-boun...@lists.frameusers.com
[mailto:framers-bounces at lists.frameusers.com] On Behalf Of Shlomo Perets
Sent: Tuesday, January 01, 2013 11:59 AM
To: Scott Prentice
Cc: Shlomo Perets; framers at lists.frameusers.com
Subject: Re: FrameMaker 10 does not start ("licensing expired")



Scott Prentice wrote:




I'm seeing this problem as well.

Unfortunately, I don't think this will be something that can be resolved by
Adobe fixing something in their licensing services. Before starting FM10
this morning, I disconnected from the Internet to test whether this is a
local issue or from phoning home. Since I got this message (and FM10 won't
start) with no Internet connection, it seems like a local application issue.
I'm thinking that they will need to deliver a patch for FM10 to fix this.
Hopefully we'll hear from someone on this soon.

Happy New Year!

...scott


Thanks for your additional insight, Scott!  Seems logical. Those who need to
use FM10 until a patch is available (if indeed needed) can install FM11 as a
trial version, and save as FM10 when FM10 can be used again.

When various FM10 bugs were discussed in the list a while back, FM11 was
mentioned as the patch for FM9/10 (for a fee), but that's a different story
;-)

[ Two years ago or so I encountered the "licensing expired" problem when
installing TCS2 on a new computer. The only real fix then, after spending
many chat/phone hours with all kinds of "solution" attempts, was to get a
new serial number from Adobe's representatives in Israel at the time. The
old serial number was absolutely valid on the previous computer or when
tested in other computers with de-activation. ]

Shlomo




-- next part --
An HTML attachment was scrubbed...
URL: 

FrameMaker 10 does not start ("licensing expired")

[William W. Saylor, PE]

Anjaneai,



   I appreciate the attempts at help but resetting the clock on
your computer, particularly if you are tied into a critical network, is one
the absolutely stupidest things to do. The unintended consequences are,
literally, indefinable.

Bill



From: framers-boun...@lists.frameusers.com
[mailto:framers-bounces at lists.frameusers.com] On Behalf Of Anjaneai S
Sent: Tuesday, January 01, 2013 2:41 PM
To: Tammy Van Boening
Cc: framers at lists.frameusers.com
Subject: Re: FrameMaker 10 does not start ("licensing expired")



Hi All,

I feel sorry for the inconvenience to all of you.

I am working to see if I can provide you a solution.
Meanwhile, you all can work by the step two in the article, i.e. to reset
your clock to a previous date of 2012.

I hope to update you all tomorrow.

Thanks,
Anjaneai

On Wed, Jan 2, 2013 at 2:17 AM, Tammy Van Boening
 wrote:

Also, just talked to a colleague and she gets this same message when she
opens FM 10 on her desktop (and it was installed as part of the TCS suite.)
It appears to be any FM10 user.



TVB



From: framers-boun...@lists.frameusers.com
[mailto:framers-bounces at lists.frameusers.com] On Behalf Of Tammy Van Boening
Sent: Tuesday, January 01, 2013 1:23 PM


Cc: framers at lists.frameusers.com
Subject: RE: FrameMaker 10 does not start ("licensing expired")



I am sure that it is everyone who has FM 10, regardless if it is part of a
suite or standalone. I have a longtime client and I access a virtual PC on
their network and on this virtual PC FM 10 is installed as a standalone
product. I just logged into the virtual PC and attempted to open FM 10 and
get the same lousy message. Installing FM 11 as a workaround is not an
option as this is not my PC, but my client's. I wouldn't dare install any
other SW w/out their permission first.



TVB



From: framers-boun...@lists.frameusers.com
[mailto:framers-bounces at lists.frameusers.com] On Behalf Of Tammy Van Boening
Sent: Tuesday, January 01, 2013 12:39 PM
To: 'Anjaneai S'
Cc: framers at lists.frameusers.com
Subject: RE: FrameMaker 10 does not start ("licensing expired")



Anjaneai,



I went to the site indicated by the link below and attempted Solution 2,
even though I have standalone Framemaker. It was not installed as part of an
application suite.  When I attempt to Deactivate, and then Deactivate
Permanently, I receive the message "Please connect to the internet to
deactivate" and I AM connected to the internet. I am unable to deactivate my
account at all, so I am unable to attempt Solution #2.  Also, I did stop and
then restart the FlexNet Licensing Services and that did not work either.
Like others on this, I am unable to use Framemaker 10.



TVB







From: framers-boun...@lists.frameusers.com
[mailto:framers-bounces at lists.frameusers.com] On Behalf Of Anjaneai S
Sent: Tuesday, January 01, 2013 3:47 AM
To: Shlomo Perets
Cc: framers at lists.frameusers.com; techshoret at yahoogroups.com
Subject: Re: FrameMaker 10 does not start ("licensing expired")



Hi Shlomo,

First of all, a very Happy New Year to all dear Framers!

Can you please try the steps suggested here -
http://helpx.adobe.com/creative-suite/kb/error-licensing-product-expired-cs4
.html

Also, please go to start - run - launch - services.msc and look for 'Flexnet
Licensing Service' and restart/start the service.

Please share me your findings.

Good luck!

Thanks,
Anjaneai

On Jan 1, 2013 3:06 PM, "Shlomo Perets"  wrote:


As of this morning, when starting FM10 a message indicating "licensing
expired" shows up, and the program would not run.
(likely related to the change of year -- best wishes for 2013!)

Other FM10 users in different locations encountered a similar problem.

The Adobe chat representative suggested contacting Adobe tech support by
phone, where I (expectedly) got a "closed for the holiday" message.

FM11, FM9 and FM8 do start as expected. 


Shlomo Perets

MicroType, http://www.microtype.com   
FrameMaker/Acrobat/Captivate training & consulting * FM-to-Acrobat
TimeSavers/Assistants 


___


You are currently subscribed to framers as anjaneai at gmail.com.

Send list messages to framers at lists.frameusers.com.

To unsubscribe send a blank email to
framers-unsubscribe at lists.frameusers.com
or visit
http://lists.frameusers.com/mailman/options/framers/anjaneai%40gmail.com

Send administrative questions to listadmin at frameusers.com. Visit
http://www.frameusers.com/ for more resources and info.


___


You are currently subscribed to framers as anjaneai at gmail.com.

Send list messages to framers at lists.frameusers.com.

To unsubscribe send a blank email to
framers-unsubscribe at lists.frameusers.com
or visit
http://lists.frameusers.com/mailman/options/framers/anjaneai%40gmail.com

Send administrative questions to listadmin at frameusers.com. Visit
http://www.frameusers.com/ for more 

astrological symbols as fonts

[William W. Saylor, PE]

I am working on an astrodynamics test with the usual quantity of
mathematical equations, Greek symbols, etc. I use MathType as an equation
editor since it has more extensive capabilities than the FM equation editor.


 

Traditionally there are several symbols used to represent the planets,
earth, sun, moon, Ares, etc that are basically astrological symbols. I could
use these symbols in FM directly if I could find / make them.

1.  Does anyone know of a font that includes these symbols?

2.  How hard is it to create such symbols and be able to use them in FM
(particularly as subscripts)?

3.  Thanks,

4.  Bill

 



Saylor Solutions, Inc.

William W. Saylor, PE(v) 719 481-0433

20075 Promontory Way   (mob) 719 373-3770

Monument, CO 80132  

wsay...@earthlink.net

 

___


You are currently subscribed to framers as arch...@mail-archive.com.

Send list messages to framers@lists.frameusers.com.

To unsubscribe send a blank email to
framers-unsubscr...@lists.frameusers.com
or visit 
http://lists.frameusers.com/mailman/options/framers/archive%40mail-archive.com

Send administrative questions to listad...@frameusers.com. Visit
http://www.frameusers.com/ for more resources and info.

astrological symbols as fonts

[William W. Saylor, PE]

I am working on an astrodynamics test with the usual quantity of
mathematical equations, Greek symbols, etc. I use MathType as an equation
editor since it has more extensive capabilities than the FM equation editor.




Traditionally there are several symbols used to represent the planets,
earth, sun, moon, Ares, etc that are basically astrological symbols. I could
use these symbols in FM directly if I could find / make them.

1.  Does anyone know of a font that includes these symbols?

2.  How hard is it to create such symbols and be able to use them in FM
(particularly as subscripts)?

3.  Thanks,

4.  Bill





Saylor Solutions, Inc.

William W. Saylor, PE(v) 719 481-0433

20075 Promontory Way   (mob) 719 373-3770

Monument, CO 80132  

wsaylor at earthlink.net



-- next part --
An HTML attachment was scrubbed...
URL: 
<http://lists.frameusers.com/pipermail/framers/attachments/20121030/114f0ac7/attachment.html>

astrological symbols as fonts

[William W. Saylor, PE]

Great help ? thanks much, Bill



From: framers-bounces at lists.frameusers.com 
[mailto:framers-boun...@lists.frameusers.com] On Behalf Of Stuart Rogers
Sent: Tuesday, October 30, 2012 10:41 AM
To: framers at lists.frameusers.com
Subject: Re: astrological symbols as fonts



On 30/10/2012 11:33 AM, William W. Saylor, PE wrote:

I am working on an astrodynamics test with the usual quantity of mathematical 
equations, Greek symbols, etc. I use MathType as an equation editor since it 
has more extensive capabilities than the FM equation editor. 



Traditionally there are several symbols used to represent the planets, earth, 
sun, moon, Ares, etc that are basically astrological symbols. I could use these 
symbols in FM directly if I could find / make them.

1.  Does anyone know of a font that includes these symbols?

2.  How hard is it to create such symbols and be able to use them in FM 
(particularly as subscripts)?

3.  Thanks,

4.  Bill





Saylor Solutions, Inc.

William W. Saylor, PE(v) 719 481-0433

20075 Promontory Way   (mob) 719 373-3770

Monument, CO 80132  

wsaylor at earthlink.net








A google search of "font zodiac sign" turns up a number of links; I'm sure you 
could modify the terms and find many more.  Here's one:
http://www.astrosense.net/downloads.html
"ASTROGADGET is a True Type font which contains all the star sign symbols 
(glyphs) and planets plus other astrology related symbols"

HTH,



-- 
Stuart Rogers
Technical Communicator
Phoenix Geophysics Limited
3781 Victoria Park Avenue, Unit 3
Toronto, ON, Canada  M1W 3K5
+1 (416) 491-7340 x 325

http://www.phoenix-geophysics.com
-- next part --
An HTML attachment was scrubbed...
URL: 
<http://lists.frameusers.com/pipermail/framers/attachments/20121030/b21c50e8/attachment.html>

FW: FM10 - font error

[William W. Saylor, PE]

From: William W. Saylor, PE [mailto:wsay...@earthlink.net] 
Sent: Friday, October 19, 2012 6:05 PM
To: 'framers at lists.framerusers.com'
Subject: FM10 - font error



I am using FM10 on a book project and have inherited some older (FM7?) files
that were exchanged using the .mif format. Somewhere there must be a "Times"
font called out, which is no longer available. When I open a single chapter
there is no problem - just an error message saying Times New Roman is used
instead. However, when I put the chapters in a book and use the
document>formatting>number command to set each chapter I get an error that
FM10 can do nothing because of the previous error.



I have searched the document, all tags etc. and can find no reference to or
use of Times. Any suggestions?

Thanks,

Bill





Saylor Solutions, Inc.

William W. Saylor, PE(v) 719 481-0433

20075 Promontory Way   (mob) 719 373-3770

Monument, CO 80132  

wsaylor at earthlink.net



-- next part --
An HTML attachment was scrubbed...
URL: 
<http://lists.frameusers.com/pipermail/framers/attachments/20121019/60e39fef/attachment.html>