Why does he/she want 2x A5 with print marks on an A3?
If your client wants this printed (why else the print marks) just have
the print shop do this. No problem for them, and probably no or little
extra cost.
If you really want to do this as your client suggests, just print to
ps (file) from FM
When buying through such channels always check for the serial number.
Scammers won't reply, as they fear they will be exposed.
EBay gives you a certain security here if you do things the right way.
Ask the seller the necessary questions before you buy and to that
through the e-bay system, not by
Thanks, Stuart. I had forgotten about this one. Downloaded it 2-3
years ago and did not have the time to use it. Did some testing just
now and found that, seemingly, it can completely replace the awkward
tables.
I am going to give it a serious try, as I am in the middle of a manual
which does a
Hi Tanya,
FM does not work well with Arabic (or other without extended ASCII
languages). However, for small jobs I have been able to do this by
adding settings the environments on my computer to Arabic (except for
the keyboard settings -- you should be able to toggle between your
regular locale
on the
show! /grin
Seats here: 6. Users: 3 (for now).
Bodvar Bjorgvinsson
Iceland
On 5/9/07, Diane Gaskill [EMAIL PROTECTED] wrote:
Hi all,
I know Adobe keeps all of their numbers a Big Secret, but I am creating a
comparison spreadsheet in my research on FM vs AT and I need to have a general
idea
numbers from Wingdings 1?
I have no problems with the circled 1.
Bodvar Bjorgvinsson,
Supervisor Publishing,
Air Atlanta Icelandic.
___
You are currently subscribed to Framers as [EMAIL PROTECTED]
Send list messages to [EMAIL PROTECTED
. There
is, I understand, no solution to the problem in sight.
I do not see a paperless office in the near future. There would have
to be a major change in the Internet system for that to happen --
which might just as well end in doing away with the Internet as such.
Bodvar Bjorgvinsson
-- never pessimistic
Bill, are you by any chance implying that FramMaker.next will come
with a Sushi support. That would be nice. FM does such a nice thing of
wrapping upp a lots of things anyway! ;-)
Bodvar Bjorgvinsson
-- here to lighten up your Monday morning.
On 5/17/07, Bill Swallow [EMAIL PROTECTED] wrote
-
From:
[EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED]
.com] On Behalf Of Bodvar Bjorgvinsson
Sent: Wednesday, May 16, 2007 6:48 AM
To: framers@lists.frameusers.com
Subject: Character switching FM/Distiller
Hi all,
I am trying to use Zapf Dingbats (that has never failed me!) to
display
On 5/21/07, Dov Isaacs [EMAIL PROTECTED] wrote:
For what it is worth, there is no such thing as an
Adobe PostScript Driver, at least for the current
versions of Windows. The driver used for the Adobe PDF
PostScript printer driver instance and for most printers
supporting PostScript is in fact
. Is there a malfunction in the Xref marker, is the graphic
not kosher, etc.
Any help out there, please? I am going home now. Will check the mail
in the morning.
Bodvar Bjorgvinsson
Supervisor Publishing
Air Atlanta Icelandic.
http://www.airatlanta.com
.
The downside is that this is something you have to tell your customers
to do, because Adobe did not exactly advertise this clumsiness.
Hopefully this has been solved in later versions of Acrobat.
HTH,
Bodvar Bjorgvinsson
On 5/31/07, Rene Stephenson [EMAIL PROTECTED] wrote:
All,
We have a quick
My FNTCACHE.DAT was only 767 kb this morning. I deleted it
nevertheless and rebooted. Now it is the same size as before (767 kb).
And I am trying to print again.
Result: Crash at the same point as before, page 13 in chapter 3. :-(
To answer Art's questions:
Platform: WinXP SP2.
Acrobat
with FM, or if you have a complete Acrobat installation...
Art
On 6/1/07, Bodvar Bjorgvinsson [EMAIL PROTECTED] wrote:
My FNTCACHE.DAT was only 767 kb this morning. I deleted it
nevertheless and rebooted. Now it is the same size as before (767 kb).
And I am trying to print again.
Result: Crash
On 6/4/07, Combs, Richard [EMAIL PROTECTED] wrote:
Bodvar Bjorgvinsson wrote:
I am using the Distiller 7 that came with FM. I also have
installed Acrbat 6 pro. The odd thing though is that it seems
that FM can see the old joboptions, but Distiller 7 can only
see the ones that reside in its
and reserve them for use in FM, but still keep as
many as you want available in Acrobat. Makes always getting the right
setting file in FM easy, cause there aren't any options.
Art
On 6/4/07, Combs, Richard [EMAIL PROTECTED] wrote:
Bodvar Bjorgvinsson wrote:
I am using the Distiller 7
Just a note: Even after making the suggested changes the warning will
still show, but only the first time for each type of undo.
Bodvar Bjorgvinsson
On 6/4/07, Kwiatkowski Richard (ST-VS/DOC-La)
[EMAIL PROTECTED] wrote:
Hello Jennifer,
We recently upgraded to FM 7.2 and encountered the same
this
could be done, especially if quotation marks are just typed and not
relying on an element or an attribute (maybe attributes may be used
for opening and closing quotes, etc.).
Am I over my head in this?
Please respond on or off the list.
Bodvar Bjorgvinsson
Iceland
FrameMaker seems rather limited in offering language support.
Icelandic hyphenation rules are basically:
1. Between compound words (auto-matic)
2. Before a vowel.
But both rules are subjects to exceptions, but I think that all in all
Icelandic hyphenation rules are rather simple.
My question
I think you must all be hinting that the final EDD will be rock solid!
;-)
Actually the last joke about the tablets fits in Icelandic too. I may
even have heard it with God as the adviser -- which also gives a
deeper meaning to the joke.
-- Is it Friday already?
Bodvar
On 6/20/07, Lin Surasky
If you save the file as MIF and search that, then you got a flat file
(Document, Master Ref. pages all in one), easy to search -- and
replace -- in a fairly good text editor (TextPad, ConText, jEdit,
etc.).
Bodvar
On 6/18/07, Rene Stephenson [EMAIL PROTECTED] wrote:
FM Console does show the
I guess you are using the first cell for graphics, am I right?
I have had some luck with using a sidehead paragraph tag for this
purpose with font size and line space set to a minimum and the space
below to a minus equaling the line size. The paragraph will call a
certain graphic in the
documentation at the cudspan
location.
HTH
Regards,
Peter
___
Peter Gold
KnowHow ProServices
On 7/19/07, Bodvar Bjorgvinsson [EMAIL PROTECTED] wrote:
I am not familiar with DoBatch, but why not simply print book to file?
Setting Adobe PDF (Distiller) or any
I do not have that problem. When I start FM 8 trial i get a popup that
my trial period has expired!
Adobe is looking into the problem.
Bodvar
On 8/1/07, Gagne, Bernard (Bolton) [EMAIL PROTECTED] wrote:
Good morning (EDT) all,
We have tried several times this morning to download the trial
but this results in the new \p taking on the paragraph attributes of
the next line, removing extra vertical space or changing to
superscript if next line starts on a superscript.
Was there another solution to this?
Thanks,
Bodvar Bjorgvinsson
Iceland
changed this erraneous behaviour in 8.
There were several annoyances still in the Beta 2, and I don't think
they took the time to finish correcting these.
Bodvar
On 8/3/07, Kenneth C. Benson [EMAIL PROTECTED] wrote:
Bodvar Bjorgvinsson wrote:
but this results in the new \p taking
On 8/3/07, Combs, Richard [EMAIL PROTECTED] wrote:
Bodvar Bjorgvinsson wrote:
I thought I had seen in this list a discussion on how to
remove trailing spaces that so often come with Word documents
that are either imported into FrameMaker or opened by
FrameMaker (by conversion). I have
Same problem with me, also reported to the Team. No resolution yet. :-(
Cost me two days of reworking into FM 7.2.
Bodvar Bjorgvinsson
On 8/1/07, Randall Larson-Maynard [EMAIL PROTECTED] wrote:
I was a beta 8 tester.
Beta 8 expired yesterday. I downloaded the trial 8 copy and installed. All
Thanks for the notion here, Dov.
I _think_ I did. Had to, really, because of rather narrow space on my
HDs. But I did not uninstall until after downloading and maybe also
unzipping the Trial version. There were no explanations in the Beta
testers site that I recall telling about the proper
One way of messing with this would be to add a run-in heading with
Dingbats before the other headings. Only allow for it when setting the
indents and tabulature of the headings.
Bodvar
On 8/9/07, Steve Rickaby [EMAIL PROTECTED] wrote:
At 17:14 +0200 9/8/07, Shmuel Wolfson wrote:
If you don't
Thanks, Sarah,
Lot of things here to support my suspicion that Adobe should have
waited a couple of months with this release. We will probably see more
than a couple of patches soon.
This registering thing: does it mean that we no longer can install the
same FM on two computers like the license
on a Monday!). ;-)
TBF
Bodvar Bjorgvinsson
___
You are currently subscribed to Framers as [EMAIL PROTECTED]
Send list messages to [EMAIL PROTECTED]
To unsubscribe send a blank email to
[EMAIL PROTECTED]
or visit
http://lists.frameusers.com/mailman
I found a posting since 2004 about the same thing. This happened when
columns were set to balanced. Same here. There was never a reply to
this posting.
Is this a problem that others have experienced?
Bodvar
On 8/27/07, Bodvar Bjorgvinsson [EMAIL PROTECTED] wrote:
I think this is an oldie
that otherwise don't seem
solvable.
Good luck!
On Tuesday, August 28, 2007 09:06 AM, Bodvar Bjorgvinsson wrote:
| I found a posting since 2004 about the same thing. This happened when
| columns were set to balanced. Same here. There was never a reply to
| this posting.
|
| Is this a problem
, Steve Rickaby [EMAIL PROTECTED] wrote:
At 20:51 + 28/8/07, Bodvar Bjorgvinsson wrote:
And to complicate things further, the eth and thorn and even an accented y
(which are all parts of the extended ASCII) seem to FrameMaker just as some
space character when it comes to hyphenating
Tina,
I will not repeat what others have already suggested, but in addition
to that, you always have the option of applying a Character Format
(Tag) to your footnotes or parts of them.
Bodvar
On 8/27/07, Tina Ricks [EMAIL PROTECTED] wrote:
I'm looking for help with footnote reference numbers.
I, for one, was glad to accept. Now the rest of the week is ruined! :-(
But it is Friday, so ...
;-)
Bodvar
On 8/31/07, Bill Swallow [EMAIL PROTECTED] wrote:
All,
Many of you whom I've conversed with through this list have been sent
invites for LinkedIn. This was not intentional. Somehow
PP does not seem to behave well when it comes to printing. My solution
would be to print to file full width (Letter/A4 - sadly printing will
not (Office 2003) print landscape) and then crop top and bottom all
pages. After that FM should be able to import by ref.
Any other ideas would be
and importing those by reference would be considerably
better. Perhaps there is a reason not to do this, but it sure works
great here.
Steve Cavanaugh
-Original Message-
From: [EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED]
On Behalf Of Bodvar Bjorgvinsson
Sent: Thursday, September 06
elements (structured), and now
the file distilled without any problems.
Bodvar Bjorgvinsson
Iceland
On 9/10/07, Shlomo Perets [EMAIL PROTECTED] wrote:
Tina,
You wrote:
I'm using Frame 8.
I have a book (28 chapters) with a TOC. I'm creating a PDF
using the File Save As PDF command
Great news!
This seems to me to be the official stamp of Adobe finally
acknowledging FrameMaker for what it is first and foremost: the best
all-over technical publication workhorse.
IMHO it only remains for Adobe to realise that FM is also one of the
best tools for regular book layout, except
Does not work either for me, but this one does:
http://www.adobe.com/products/technicalcommunicationsuite/?promoid=BJXOA
Bodvar
On 9/25/07, Mark Southee [EMAIL PROTECTED] wrote:
This one should work.
http://www.adobe.com/products/technicalcommunicationsuite/
Cheers
Mark
Mark Southee
I believe there is no real support for Swedish, is it (I forget, as I
have not used FM8 since Beta testing)?
Did you try to set the language to None for the paragraph tags?
After that you can manually hyphenate.
I tried running Dashes Pro on rtf files and it worked except that
their support for
I am not quite sure I understand what you are trying to do. It seems
to me you are mixing methods. On one hand you are using an
autonumbering of a paragraph and on the other hand you want to control
it with a system variable for page numbering. That, to my knowledge,
cannot be done. This is one of
My walnut is telling me that a footnote is a footnote and things that
do not fit within the majority of a page as allowed in FrameMaker must
be something else, like an end note or just as an insert (not in the
FM way) that is just shown indented and/or in smaller type in direct
continuation of the
I can recommend Dell Precision. I have had the Precision 450 Dual
Processor with 2GB memory for three and a half years now, all internal
hardware preinstalled (factory installed), except one extra (my old)
hard drive. I have never had a better or more reliable PC (although my
home assembled PC
IIRC, Acrobat does not support foreign characters in bookmarks, at
least not in the older versions. I have not yet tested it in Acrobat
8.
Bodvar
On Dec 13, 2007 4:17 PM, Chinell, David F (GE Indust, Security)
[EMAIL PROTECTED] wrote:
I'm writing on behalf of a co-worker.
OS: Windows XP
Emily,
THIS is the group to turn to in or before such woes! ;-)
You don't give much info about your problem with 7.1, but many of us
have had these internal errors. Usually thet are caused by some
setting not being the right one. So, what is the version of your
Acrobat/Distiller? And a little
Emily,
The one thing I cannot see that has been mentioned int this discussion
and was my main teaser is the setting in Generate Acrobat Data.
Ticking the Generate Tagged PDF (and then emptying the box or
leaving only a few things to tag -- for leaner output) did the trick
for me.
Bodvar
On Jan
between pages or moving between pages. I think
more info from you about your layout would be needed to give any
reasonably relevant reply.
Bodvar Bjorgvinsson
On Sun, Feb 3, 2008 at 10:36 AM, David Kuhn [EMAIL PROTECTED] wrote:
I had to adjust our template to add a line to the header (recently one
be the offending
factor.
Bodvar Bjorgvinsson
On Fri, Feb 1, 2008 at 3:03 PM, Thomas Scalise
[EMAIL PROTECTED] wrote:
Esteemed colleagues,
Two questions, please.
1. I've got a book that I inherited from a contractor colleague
that exhibits persistent change bars, even though I have
In large documents, bigger RAM can speed up the work but usually 1GB is ample.
Which version FM and in what instances does this happen?
Bodvar
On Wed, Feb 6, 2008 at 11:22 AM, Shmuel Wolfson [EMAIL PROTECTED] wrote:
I occasionally have the dreaded Internal Error after a search in FM,
then FM
? If it happens when you are
scrolling, that might indicate a bad image (the error would show
approximately in the same spot in the document).
Bodvar
Regards,
Shmuel Wolfson
Bodvar Bjorgvinsson wrote:
In large documents, bigger RAM can speed up the work but usually 1GB is
ample
for the graphic to appear.
Noe I just wait. Lately it happens occasionally when doing a search in
an entire book.
Regards,
Shmuel Wolfson
Bodvar Bjorgvinsson wrote:
On Thu, Feb 7, 2008 at 10:57 AM, Shmuel Wolfson [EMAIL PROTECTED] wrote:
I'm using FM Version 7.2b128
an error message for a moment and
telling it must close.
My first experience in this direction for a long time.
I have not tried to regenerate this error.
Bodvar Bjorgvinsson
Air Atlanta Icelandic.
--
It is impossible to make anything foolproof because fools are so ingenious.
-- Edsel Murphy
. Deleting these lines
in the MIF cleared the change bar. So this (or something similar) is
what to look for in the MIF in such cases.
Bodvar
On Fri, Feb 15, 2008 at 9:04 AM, Bodvar Bjorgvinsson [EMAIL PROTECTED] wrote:
FM 7.2 XP. When looking for a way to remove a ghost revision bar at
the end
I talked to my IP Director and he advised me to google for info on
logoff scripts. I came up with this for Win XP:
QUOTE:
If you go to start run, type gpedit.msc
This should open the local group policy.
Under the User Configuration Window Settings Scripts(Logon/Logoff).
There are key/values
Ask the seller (if not already stated in the description) whether this
is an unused, sealed copy. By the rules of eBay, wrong information
will deem the seller to refund.
Do not ask for a serial number because the seller will probably know
that such information can (sometimes?) be used illegally
I did not even know of the personal maker.ini, but it is there sure
enough. HOWEVER, I would not recommend putting these things in there,
the reason being:
1. ~\Documents and Settings\ ~~~ da da da \maker.ini showed with
today's stamp, implying that it is regenerated each time you boot.
2. The
Thanks Fred,
I stand corrected.
Bodvar
--
It is impossible to make anything foolproof because fools are so ingenious.
-- Edsel Murphy, dec.
On Thu, Mar 6, 2008 at 1:46 PM, Fred Ridder [EMAIL PROTECTED] wrote:
In responding about the personal copy of maker.ini Bodvar wrote (in part):
Hi,
Does anyone on the list know where I could get a syntax highlighting
addition for Maker Interchange Format for the EditPad editor? Seems
not to come up on Googling, but some people on the list seem very
happy with EditPad.
Thanks,
Bodvar
--
It is impossible to make anything foolproof
I know this is a late reply but I will try to help a bit.
Question: Will all pages show the same date (i.e. be updated at the
same time) or will the pages be revised as an entity in itself?
If the whole manual will show the same date, the easiest thing would
be to make a variable with the date
Hi Milan,
One of the files that come with FrameScript is ImportPgfFormats.fsl
which I use very much. With that you can choose which one or more of
PgfFormats you want to import.
Bodvar
On Fri, Apr 25, 2008 at 3:04 PM, Milan Davidovic [EMAIL PROTECTED] wrote:
I couldn't think of good terms for
parties to make those, resulting in diminishing
offers of printers with the Adobe PS3 logo.
Can anyone on the list confirm this or explain this? (Dov? Shlomo?)
Thank you,
Bodvar Bjorgvinsson
Air Atlanta Icelandic
--
It is impossible to make anything foolproof because fools are so ingenious.
-- Edsel
Bright Path Solutions ( http://www.brightpathsolutions.com ) is based
in or around Raleigh, NC.
Bodvar
On Wed, May 7, 2008 at 3:09 PM, Deirdre Reagan [EMAIL PROTECTED] wrote:
Just to be clear, I'm looking for names of companies. I can travel to
Atlanta, Birmingham, and Washington DC. (and
On Wed, May 7, 2008 at 3:33 PM, Deirdre Reagan [EMAIL PROTECTED] wrote:
Hi all:
I know this topic was just covered, and I've searched for it in the
archives, but I'd like also to get your opinions.
I've been told that Framemaker: Classroom in a Book is an excellent
resource for
on boot.
I recently wrote on the list a procedure to make Windows do this
automatically. It has worked fine so far.
Best regards,
Bodvar Bjorgvinsson
On Wed, May 7, 2008 at 8:04 PM, HSC Italian [EMAIL PROTECTED] wrote:
Hi Rick,
That's good news that you don't think it's maxing out ... as I
And: FM not only changes the presentation of the characters, like Word
does, but actually changes them (the character code).
Besides the shortcuts, there is a toolbar with these options. Click
View Quick Access Bar, if it is not showing.
Bodvar Bjorgvinsson
On Sat, May 17, 2008 at 2:50 PM, Ken
The OLE linking of Visio files has worked well for me.
I have tried PDF-ing the Visio and EPS-ing that in Acrobat. It
sometimes works and sometimes crashes FM, like a couple of days since.
I then saved the Visio as AutoCad and opened that in Illustrator, made
some changes and EPS-ed that. No crash
Our IT staff say there are lots of other incompatiblities in SP3 with
older software and that they are not going for it until it has been
out for approx. a full year. (I hate to say this, but it seems a lot
like with FM 8, as predicted by so many in June last year. Sorry,
Adobe, sad but true, I'm
condition tag.
Can anyone shed a light on this for me?
Thanks,
Bodvar Bjorgvinsson
--
It is impossible to make anything foolproof because fools are so ingenious.
-- Edsel Murphy, dec.
___
You are currently subscribed to Framers as [EMAIL PROTECTED]
Send
, 2008 at 7:29 AM, Bodvar Bjorgvinsson [EMAIL PROTECTED] wrote:
This is weird. I am working on a nonstructured FM (7.2) book and when
printing to ps with bookmarks (and tagged or untagged) it always
crashes on the same spot, page 5 of Chapter 4. I can distill the ps
file and it looks fine all
Message-
From: [EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED] On Behalf Of Bodvar
Bjorgvinsson
Sent: Wednesday, June 04, 2008 8:31 AM
To: Frame Users
Subject: Re: FM Crash chapter 4 page 5
Thanks Art,
I have a script that runs at shutdown that deletes the FNTCACHE.DAT
file, so no problem
I tried this now and same results.
Bodvar
On Wed, Jun 4, 2008 at 3:19 PM, Bodvar Bjorgvinsson [EMAIL PROTECTED] wrote:
No, I had not tried that yet.
One funny thing. When processing the files with all book components
open, I get recovery files of all files except Chapter 4.
Thanks,
Bodvar
Yes
Bodvar
On Wed, Jun 4, 2008 at 4:06 PM, Art Campbell [EMAIL PROTECTED] wrote:
Can you print Chapter 4 to PDF by itself?
Art
On Wed, Jun 4, 2008 at 11:28 AM, Bodvar Bjorgvinsson [EMAIL PROTECTED]
wrote:
I tried this now and same results.
Bodvar
On Wed, Jun 4, 2008 at 3:19 PM
Hi Dov,
This is new to me, as it has been stressed on many occations that the
EPS should be saved as PS language level 3. Almost all my EPSs are.
Could this be the thing that is causing me all the trouble these days
(see message thread FM Crash chapter 4 page 5)?
Regards,
Bodvar
On Wed, Jun 4,
tea as the Englishmen say, so I am going home now.
Thanks to everyone that helped -- or tried to.
One final word to Adobe: Please make effort to make FM stable in
handling all sorts of situation. I am really getting tired of the all
to frequent surprises.
Bodvar Bjorgvinsson
Air Atlanta Icelandic
a problem and should be what you import into FrameMaker
documents.
- Dov
-Original Message-
From: Bodvar Bjorgvinsson [mailto:[EMAIL PROTECTED]
Sent: Wednesday, June 04, 2008 11:16 AM
To: Dov Isaacs
Cc: Tim Lewis; framers@lists.frameusers.com
Subject: Re: Printing Error
tifs and 15 eps graphics
(referenced) which are in fact mostly full pages from pdf documents.
Can anyone comment on how XP SP2 memory or resources deal with EPSs in FM?
Bodvar
On Wed, Jun 4, 2008 at 6:51 PM, Bodvar Bjorgvinsson [EMAIL PROTECTED] wrote:
Art,
I am utterly flabbergasted
All the pages were EPS'd from PDF according to the old Gospel. ;-)
I will, when I get the time again, try the PDF approach, as so many
have suggested and I have successfully done in many other (more
recently prepared) manuals. At least I have not had any problems with
such pdfs to speak of.
samples though.
Bodvar Bjorgvinsson
--
It is impossible to make anything foolproof because fools are so ingenious.
-- Edsel Murphy, dec.
___
You are currently subscribed to Framers as [EMAIL PROTECTED]
Send list messages to [EMAIL PROTECTED
Finally! -- if it works, that is (but no hurray here -- how many years
has this been taking?)
However, to you Yves, tanks for the information. You get the hurray from me. :-)
Bodvar
On Mon, Jul 7, 2008 at 6:49 AM, Yves Barbion [EMAIL PROTECTED] wrote:
Hi Framers
Good news for those of you
This I have experienced (besides what is due to the FNTCACHE.DAT
problem) when Structured FrameMaker has gobbled up too much memory.
The only solution (until Micro$oft sometime in the next ten years
solves it with a brand new Hotfix ;-) ) is to quit FM and restart or
even to reboot.
Bodvar
Seems that this is only for Vista. That is the only option I get and
the file I received was a Vista installation file. I even opened it
using the expand function, but this showed only Windows 6.0 related
files (mum and cab). Is there a way to get this working on XP SP2?
Bodvar Bjorgvinsson
that installed fine.
348411_ENU_i386_zip.exe at 715 K
Art
On Tue, Jul 8, 2008 at 7:30 AM, Bodvar Bjorgvinsson [EMAIL PROTECTED] wrote:
Seems that this is only for Vista. That is the only option I get and
the file I received was a Vista installation file. I even opened it
using the expand function
] on behalf of Art Campbell
Sent: Tue 7/8/2008 7:41 AM
To: Bodvar Bjorgvinsson; FrameUsers List
Subject: Re: Deleting fntcache.dat no longer necessary: Windows Hotfix
nowavailable
When I downloaded from the site, you had to specify your OS, I assume
in order to get an OS-specific file. I think
FM upgrade.
Bodvar Bjorgvinsson
On Wed, Aug 13, 2008 at 8:50 AM, Michael Zaichenko
[EMAIL PROTECTED] wrote:
Hello there,
does anyone know of a utility that would put guides on my screen. To explain:
Frame doesn't have any guides and at times it's needed. Any advanced software
- Photoshop
-down list.
Can anyone shed a ligh on this? Is there anything missing
OS: XP SP2.
Thanks beforehand,
Bodvar Bjorgvinsson
Supervisor Publishing
Air Atlanta Icelandic
--
It is impossible to make anything foolproof because fools are so ingenious.
-- Edsel Murphy, dec
Me, I am interested! :-)
Bodvar
On Fri, Aug 15, 2008 at 9:14 AM, Michael Zaichenko
[EMAIL PROTECTED] wrote:
Hello all,
just finished scripting GUIDES in FrameMaker. I.e. rules, just like you have
in InDesign or Illustrator. I know Frame was missing this option ever since
it appeared and
Carol,
On this list attachements are stripped off the messages. You would
have to send it directly to someone on the list or jing a snapshot
of it (see http://www.jingproject.com/) and insert the link.
I think a sample is need for a compact answer.
Bodvar
On Wed, Aug 13, 2008 at 3:42 PM,
Sorry, all. I forgot that I had set Klaus Müller's handy itl Script
RemoveFontMenu to autoinstall months ago at which time the font menu
was bugging me.
Silly me! :-(
Bodvar
On Thu, Aug 14, 2008 at 8:02 PM, Bodvar Bjorgvinsson [EMAIL PROTECTED] wrote:
FM 7.2 no longer shows the Font menu item
LOL!
On Tue, Aug 19, 2008 at 2:30 PM, [EMAIL PROTECTED] wrote:
Ahhh, well, we all have had these little lapses in memory. At least it
wasn't as bad as forgetting to plug-in the computer before you called the
help desk. mea culpa.
Scott
At 1:11 PM + 8/19/08, Bodvar Bjorgvinsson wrote
Thanks. Very helpful, indeed.
Bodvar
On Mon, Sep 29, 2008 at 8:40 AM, Paul Findon [EMAIL PROTECTED] wrote:
Framers,
Following the recent discussion of FM features migrating to InDesign,
here's a snippet from an interview between Adobe Co-Chairman John
Warnock and Conrad Taylor, BCS
I don't know much about the Mac, but googling pdf to html mac os x
gives bout 24,300 results including some Mac forums where, I believe,
you get the best help.
Bodvar
On Mon, Nov 3, 2008 at 6:15 PM, Anne Urban [EMAIL PROTECTED] wrote:
Hello framers,
Can anyone recommend a PDF to HTML
-- this is not the end of the world -- yet!)
Best regards,
Bodvar Bjorgvinsson
Iceland
http://www.linkedin.com/in/bodvarbjorgvinsson
___
You are currently subscribed to Framers as [EMAIL PROTECTED]
Send list messages to [EMAIL PROTECTED]
To unsubscribe
Thanks for the kind words and reminder, Jeremy.
Regards,
Bodvar
On Tue, Dec 2, 2008 at 9:35 PM, Jeremy H. Griffith [EMAIL PROTECTED] wrote:
-- snipped --
Yes, the tech sector here has been hard hit too, with major layoffs
at Sun and at numerous other tech companies. It doesn't look as bad
would be the best procedure when
printing to file and PDF-ing. These, and some other files, IMO, don't
have any business being uploaded to the repository. Do you try to
print/save those files to a place outside the SVN library or just try
not to upload them by accident?
Bodvar Bjorgvinsson
. It supports repository mirroring, disconnected
operation, history-sensitive merging, and integrates with other
version control systems, as well as popular visual merge tools.
UNQUOTE
It seems to allow for multiple repositories that can work together to
some extent.
Bodvar Bjorgvinsson
Iceland
.) are not
included.
Scott
At 12:27 PM + 12/15/08, Bodvar Bjorgvinsson wrote:
I don't seem to find any list committed to working with FM under SVN
or TortoiseSVN, so I will try and put the problem up here.
I am testing SVN. My IT has set up a dedicated SVN server and also
they set up
help me or explain this to me?
Thanks beforehand,
Bodvar Bjorgvinsson,
Supervisor Publishing,
Flight Ops,
Air Atlanta Icelandic.
--
It is impossible to make anything foolproof because fools are so ingenious.
-- Edsel Murphy, dec.
___
You are currently
1 - 100 of 495 matches
Mail list logo