From: Lucky Green [EMAIL PROTECTED]
Date: Tue, 25 Feb 2003 20:07:45 -0800
Kevin wrote:
I updated my 5.0 system built in late January to RELENG_5_0 on Sunday
and the Ethernet was not working. I tried again last night with no
change in behavior.
The system is an AMD K6-2 on an ASUS
Kevin wrote:
I updated my 5.0 system built in late January to RELENG_5_0 on Sunday
and the Ethernet was not working. I tried again last night with no
change in behavior.
The system is an AMD K6-2 on an ASUS P5A mobo. I have a 3Com 3c905B
Ethernet which had been working fine on a kernel
: Thursday, February 20, 2003 3:54 PM
Subject: Re: Ethernet (xl) will not transmit or receive
: Date: Thu, 20 Feb 2003 22:41:11 +0100
: From: Tilman Linneweh [EMAIL PROTECTED]
:
: Check out the Errata
: http://www.freebsd.org/releases/5.0R/errata.html There is an item
: for the xl0 driver, although
Date: Thu, 20 Feb 2003 08:19:05 -0800
From: Kevin Oberman [EMAIL PROTECTED]
Sender: [EMAIL PROTECTED]
I updated my 5.0 system built in late January to RELENG_5_0 on Sunday
and the Ethernet was not working. I tried again last night with no
change in behavior.
The system is an AMD K6-2 on
-Original Message-
From: [EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED]]On Behalf Of Kevin Oberman
Sent: Friday, February 21, 2003 7:27 AM
Cc: [EMAIL PROTECTED]
Subject: Re: Ethernet (xl) will not transmit or receive
Date: Thu, 20 Feb 2003 08:19:05 -0800
From: Kevin Oberman [EMAIL
On Thu, 20 Feb 2003, Kevin Oberman wrote:
I updated my 5.0 system built in late January to RELENG_5_0 on Sunday
and the Ethernet was not working. I tried again last night with no
change in behavior.
The system is an AMD K6-2 on an ASUS P5A mobo. I have a 3Com 3c905B
Ethernet which had been
I updated my 5.0 system built in late January to RELENG_5_0 on Sunday
and the Ethernet was not working. I tried again last night with no
change in behavior.
The system is an AMD K6-2 on an ASUS P5A mobo. I have a 3Com 3c905B
Ethernet which had been working fine on a kernel built in late
January.
Kevin,
I experienced similar issues yesterday when just installing release 5 from
ftp (floppy boot). I essentially had to ifconfig the device down and then
back up and it then seemed to continue ok... but I think there most likely
something odd going on :/
Cheers,
Andrew
On Thu, 20 Feb 2003,
Hi,
On Thu, Feb 20, 2003 at 11:32:04AM -0500, Andrew R. Reiter wrote:
I experienced similar issues yesterday when just installing release 5 from
ftp (floppy boot). I essentially had to ifconfig the device down and then
back up and it then seemed to continue ok... but I think there most likely
Schlesner [EMAIL PROTECTED]
To: [EMAIL PROTECTED]
Sent: Thursday, February 20, 2003 12:44 PM
Subject: Re: Ethernet (xl) will not transmit or receive
: Hi,
:
: On Thu, Feb 20, 2003 at 11:32:04AM -0500, Andrew R. Reiter wrote:
: I experienced similar issues yesterday when just installing release 5
Nick H. -- Technical Support Engineer wrote:
Ive run into the exact same problem on about 8 machines now, all running
different network cards. The network will just simply not work if I have
IPFILTER built into the kernel. On some of the machines, I started getting
No route to host. This
, 2003 3:11 PM
Subject: Re: Ethernet (xl) will not transmit or receive
: Nick H. -- Technical Support Engineer wrote:
: Ive run into the exact same problem on about 8 machines now, all running
: different network cards. The network will just simply not work if I
have
: IPFILTER built
]
To: Nick H. -- Technical Support Engineer [EMAIL PROTECTED]
Cc: [EMAIL PROTECTED]
Sent: Thursday, February 20, 2003 3:11 PM
Subject: Re: Ethernet (xl) will not transmit or receive
: Nick H. -- Technical Support Engineer wrote:
: Ive run into the exact same problem on about 8 machines now
In arved.freebsd.current, you wrote:
I updated my 5.0 system built in late January to RELENG_5_0 on Sunday
and the Ethernet was not working. I tried again last night with no
change in behavior.
The system is an AMD K6-2 on an ASUS P5A mobo. I have a 3Com 3c905B
Ethernet which had been
200).
Cheers,
Andrew
:
:
:
:- Original Message -
:From: Maxime Henrion [EMAIL PROTECTED]
:To: Nick H. -- Technical Support Engineer [EMAIL PROTECTED]
:Cc: [EMAIL PROTECTED]
:Sent: Thursday, February 20, 2003 3:11 PM
:Subject: Re: Ethernet (xl) will not transmit or receive
:
:
:: Nick H
Date: Thu, 20 Feb 2003 22:41:11 +0100
From: Tilman Linneweh [EMAIL PROTECTED]
Check out the Errata
http://www.freebsd.org/releases/5.0R/errata.html There is an item
for the xl0 driver, although your problem looks different then mine.
Not the problem. First, the interface was working fine
16 matches
Mail list logo