On Apr 4, 2012 10:02 PM, Matt Thyer matt.th...@gmail.com wrote:
On 3 April 2012 23:12, Gary Palmer gpal...@freebsd.org wrote:
I think you should contact either SuperMicro or LSI and open a support
case as it looks like there could be a problem with either the controller
or the firmware when
On 3 April 2012 23:12, Gary Palmer gpal...@freebsd.org wrote:
On Tue, Apr 03, 2012 at 10:52:25PM +0930, Matt Thyer wrote:
I forgot to mention that I'm still having problems after this phase 11
firmware upgrade with the 6 Gbps drive being kicked out of the raidz2
with
write errors (even
On 28 March 2012 03:51, Kenneth D. Merry k...@freebsd.org wrote:
On Tue, Mar 27, 2012 at 23:50:31 +1030, Matt Thyer wrote:
On 26 March 2012 23:55, Gary Palmer gpal...@freebsd.org wrote:
On Mon, Mar 26, 2012 at 08:05:59PM +1030, Matt Thyer wrote:
On Mar 26, 2012 3:43 AM, Garrett Cooper
On Mar 27, 2012 11:50 PM, Matt Thyer matt.th...@gmail.com wrote:
I was having problems with the WD20EARX-00P AB51 drive being faulted by
ZFS until I updated the firmware to 11 and now ZFS is happy (I've also done
a full extended drive SMART test and the drive is fine).
I forgot to mention that
On Tue, Apr 03, 2012 at 10:52:25PM +0930, Matt Thyer wrote:
On Mar 27, 2012 11:50 PM, Matt Thyer matt.th...@gmail.com wrote:
I was having problems with the WD20EARX-00P AB51 drive being faulted by
ZFS until I updated the firmware to 11 and now ZFS is happy (I've also done
a full extended
On 26 March 2012 23:55, Gary Palmer gpal...@freebsd.org wrote:
On Mon, Mar 26, 2012 at 08:05:59PM +1030, Matt Thyer wrote:
On Mar 26, 2012 3:43 AM, Garrett Cooper yaneg...@gmail.com wrote:
On Sun, Mar 25, 2012 at 5:16 AM, Matt Thyer matt.th...@gmail.com
wrote:
Has this driver been
On Tue, Mar 27, 2012 at 23:50:31 +1030, Matt Thyer wrote:
On 26 March 2012 23:55, Gary Palmer gpal...@freebsd.org wrote:
On Mon, Mar 26, 2012 at 08:05:59PM +1030, Matt Thyer wrote:
On Mar 26, 2012 3:43 AM, Garrett Cooper yaneg...@gmail.com wrote:
On Sun, Mar 25, 2012 at 5:16 AM,
On Tue, Mar 27, 2012 at 10:21 AM, Kenneth D. Merry k...@freebsd.org wrote:
On Tue, Mar 27, 2012 at 23:50:31 +1030, Matt Thyer wrote:
On 26 March 2012 23:55, Gary Palmer gpal...@freebsd.org wrote:
It's painful to take this system back to r230921 due to intolerance for
downtime from it's users
On Tue, Mar 27, 2012 at 11:27 AM, Jason Wolfe nitrobo...@gmail.com wrote:
On Tue, Mar 27, 2012 at 10:21 AM, Kenneth D. Merry k...@freebsd.org wrote:
On Tue, Mar 27, 2012 at 23:50:31 +1030, Matt Thyer wrote:
On 26 March 2012 23:55, Gary Palmer gpal...@freebsd.org wrote:
It's painful to take
Message -
From: Kenneth D. Merry k...@freebsd.org
To: freebsd-s...@freebsd.org; freebsd-current@freebsd.org
Sent: Friday, January 20, 2012 8:44 PM
Subject: LSI supported mps(4) driver available
The LSI-supported version of the mps(4) driver that supports their
6Gb
SAS
, 2012 at 23:14:20 -, Steven Hartland wrote:
- Original Message -
From: Kenneth D. Merry k...@freebsd.org
To: freebsd-s...@freebsd.org; freebsd-current@freebsd.org
Sent: Friday, January 20, 2012 8:44 PM
Subject: LSI supported mps(4) driver available
8:44 PM
Subject: LSI supported mps(4) driver available
The LSI-supported version of the mps(4) driver that supports their 6Gb
SAS
HBAs as well as WarpDrive controllers, is available here:
http://people.freebsd.org/~ken/lsi/mps_lsi.20120120.1.txt
I plan to check it in to head
...@freebsd.org; freebsd-current@freebsd.org
Sent: Friday, January 20, 2012 8:44 PM
Subject: LSI supported mps(4) driver available
The LSI-supported version of the mps(4) driver that supports their 6Gb
SAS
HBAs as well as WarpDrive controllers, is available here:
http
-Original Message-
From: Stas Orlov [mailto:senn...@gmail.com]
Sent: Sunday, February 12, 2012 11:01 PM
To: Desai, Kashyap
Cc: Kenneth D. Merry; freebsd-s...@freebsd.org; freebsd-
curr...@freebsd.org; Dennis Glatting
Subject: Re: LSI supported mps(4) driver available
I build
Out of those six Drive, one drive is detected as 1.5Gbps (see below part in
dmesg log)
PHY[8].AttachedDevHandle: 0x0009
PHY[8].LinkRate: 1.5Gbps (0x80)
PHY[8].PhyStatus: NewTargetAdde
LSI IR does not support mix of mix of different link speed Drivers in a
single
I'm starting to put this system under heavy load. I had three operations
working:
1) sftp a 1.7 TB file from a file server to a local, compressed (bzip)
data set (disk-1/zvol (below)).
2) An independent data processing function across a NFS mount into a
differnt file on the same data set
-Original Message-
From: Kenneth D. Merry [mailto:k...@freebsd.org]
Sent: Tuesday, February 07, 2012 10:30 PM
To: Desai, Kashyap
Cc: Stas Orlov; freebsd-s...@freebsd.org; freebsd-current@freebsd.org;
Dennis Glatting
Subject: Re: LSI supported mps(4) driver available
On Tue, Feb
-Original Message-
From: Stas Orlov [mailto:senn...@gmail.com]
Sent: Monday, February 06, 2012 11:54 PM
To: Desai, Kashyap
Cc: Kenneth D. Merry; freebsd-s...@freebsd.org; freebsd-
curr...@freebsd.org; Dennis Glatting
Subject: Re: LSI supported mps(4) driver available
Sorry
@freebsd.org; Kenneth D.
Merry; Dennis Glatting
Subject: RE: LSI supported mps(4) driver available
-Original Message-
From: Stas Orlov [mailto:senn...@gmail.com]
Sent: Monday, February 06, 2012 11:54 PM
To: Desai, Kashyap
Cc: Kenneth D. Merry; freebsd-s...@freebsd.org; freebsd
On Tue, Feb 07, 2012 at 21:00:28 +0530, Desai, Kashyap wrote:
Can you to reproduce issue with below mentioned changes..
In mps.c
mps_get_tunables(struct mps_softc *sc)
{
char tmpstr[80];
/* XXX default to some debugging for now */
sc-mps_debug = MPS_FAULT;
Instead of
...@gmail.com]
Sent: Thursday, February 02, 2012 8:29 PM
To: Desai, Kashyap
Cc: Kenneth D. Merry; freebsd-s...@freebsd.org; freebsd-current@freebsd.org;
Dennis Glatting
Subject: Re: LSI supported mps(4) driver available
(Again clarify which version of FreeBSD you are using)
As I've stated earlier
From: Stas Orlov [mailto:senn...@gmail.com]
Sent: Thursday, February 02, 2012 8:29 PM
To: Desai, Kashyap
Cc: Kenneth D. Merry; freebsd-s...@freebsd.org; freebsd-current@freebsd.org;
Dennis Glatting
Subject: Re: LSI supported mps(4) driver available
(Again clarify which version of FreeBSD you
Hi,
We have a pack of identical Dell R610 mahcines with H200 cards.
pciconf from R610 with FreeBSD9 on ZFS, disks in JBOD mode.
mps0@pci0:3:0:0:class=0x010700 card=0x1f1e1028 chip=0x00721000
rev=0x02 hdr=0x00
vendor = 'LSI Logic / Symbios Logic'
device = 'SAS2008
supported mps(4) driver available
Hi,
We have a pack of identical Dell R610 mahcines with H200 cards.
pciconf from R610 with FreeBSD9 on ZFS, disks in JBOD mode.
mps0@pci0:3:0:0:class=0x010700 card=0x1f1e1028 chip=0x00721000
rev=0x02 hdr=0x00
vendor = 'LSI Logic / Symbios
Cc: freebsd-s...@freebsd.org; freebsd-current@freebsd.org; Dennis
Glatting
Subject: Re: LSI supported mps(4) driver available
Hi,
We have a pack of identical Dell R610 mahcines with H200 cards.
pciconf from R610 with FreeBSD9 on ZFS, disks in JBOD mode.
mps0@pci0:3:0:0
From: Stas Orlov [mailto:senn...@gmail.com]
Sent: Thursday, February 02, 2012 7:45 PM
To: Desai, Kashyap
Cc: Kenneth D. Merry; freebsd-s...@freebsd.org; freebsd-current@freebsd.org;
Dennis Glatting
Subject: Re: LSI supported mps(4) driver available
Sure, I've made two RAID (1 and 10 ) arrays
Orlov [mailto:senn...@gmail.com]
Sent: Thursday, February 02, 2012 7:45 PM
To: Desai, Kashyap
Cc: Kenneth D. Merry; freebsd-s...@freebsd.org;
freebsd-current@freebsd.org; Dennis Glatting
Subject: Re: LSI supported mps(4) driver available
Sure, I've made two RAID (1 and 10 ) arrays within LSI
FYI.
I just booted off a RAID1 array using this driver under RELENG_9 (below)
on a Tyan 8812's on-board LSI 2008 chip. I have a second FreeBSD system
with a LSI 9211-8i (IR) but it has a few more days of work before it can
do the same.
mc dmesg
Copyright (c) 1992-2012 The FreeBSD Project.
Kenneth D. Merry schreef:
On Tue, Jan 24, 2012 at 15:42:57 +0100, Johan Hendriks wrote:
Kenneth D. Merry schreef:
The LSI-supported version of the mps(4) driver that supports their 6Gb SAS
HBAs as well as WarpDrive controllers, is available here:
Kenneth D. Merry schreef:
On Tue, Jan 24, 2012 at 15:42:57 +0100, Johan Hendriks wrote:
Kenneth D. Merry schreef:
The LSI-supported version of the mps(4) driver that supports their 6Gb SAS
HBAs as well as WarpDrive controllers, is available here:
On Fri, 2012-01-20 at 13:44 -0700, Kenneth D. Merry wrote:
The LSI-supported version of the mps(4) driver that supports their 6Gb SAS
HBAs as well as WarpDrive controllers, is available here:
http://people.freebsd.org/~ken/lsi/mps_lsi.20120120.1.txt
I plan to check it in to head next week,
On Wed, Jan 25, 2012 at 20:47:37 -0800, Dennis Glatting wrote:
On Fri, 2012-01-20 at 13:44 -0700, Kenneth D. Merry wrote:
The LSI-supported version of the mps(4) driver that supports their 6Gb SAS
HBAs as well as WarpDrive controllers, is available here:
The LSI-supported version of the mps(4) driver that supports their 6Gb SAS
HBAs as well as WarpDrive controllers, is available here:
http://people.freebsd.org/~ken/lsi/mps_lsi.20120120.1.txt
I plan to check it in to head next week, and then MFC it into stable/9 a
week after that most likely.
On Fri, Jan 20, 2012 at 12:44 PM, Kenneth D. Merry k...@freebsd.org wrote:
The LSI-supported version of the mps(4) driver that supports their 6Gb SAS
HBAs as well as WarpDrive controllers, is available here:
Just to clarify, this will replace the existing mps(4) driver in
FreeBSD 10-CURRENT and
On Fri, Jan 20, 2012 at 12:53:04 -0800, Freddie Cash wrote:
On Fri, Jan 20, 2012 at 12:44 PM, Kenneth D. Merry k...@freebsd.org wrote:
The LSI-supported version of the mps(4) driver that supports their 6Gb SAS
HBAs as well as WarpDrive controllers, is available here:
Just to clarify, this
- Original Message -
From: Kenneth D. Merry k...@freebsd.org
To: freebsd-s...@freebsd.org; freebsd-current@freebsd.org
Sent: Friday, January 20, 2012 8:44 PM
Subject: LSI supported mps(4) driver available
The LSI-supported version of the mps(4) driver that supports their 6Gb SAS
HBAs
On Fri, Jan 20, 2012 at 23:14:20 -, Steven Hartland wrote:
- Original Message -
From: Kenneth D. Merry k...@freebsd.org
To: freebsd-s...@freebsd.org; freebsd-current@freebsd.org
Sent: Friday, January 20, 2012 8:44 PM
Subject: LSI supported mps(4) driver available
The LSI
On 21/01/2012, at 7:14, Kenneth D. Merry wrote:
In addition to supporting WarpDrive, the driver also supports Integrated
RAID.
Thanks to LSI for doing the work on this driver!
This is great news (the RAID support) - thanks very much.
Is there a corresponding userland tool, or plans for
38 matches
Mail list logo
