I hope this hasn't already been pounded to death, checked the archives
with no results.
I just upgraded to 4.0 and everything works fine so far except the zip
drive. Here's my dmesg:
Copyright (c) 1992-2000 The FreeBSD Project.
Copyright (c) 1982, 1986, 1989, 1991, 1993
The Regents of
It works if you can switch your parallel port to EPP (???) mode in the
bios. Transfer speed raises also under windows with this configuration
btw.
--
Fritz Heinrichmeyer mailto:[EMAIL PROTECTED]
FernUniversitaet Hagen, LG ES, 58084 Hagen (Germany)
tel:+49 2331/987-1166 fax:987-355
On Wed, 08 Mar 2000, F. Heinrichmeyer wrote:
It works if you can switch your parallel port to EPP (???) mode in the
bios. Transfer speed raises also under windows with this configuration
btw.
Thank you for the reply, I will try that. What I find odd is that it
worked fine on 3.4-STABLE.
Here is a concern i have. I had a hard time getting my parallel port
zip to work under 3.4. It turned out there may be a bug in my bios
that required me to change from EPP mode to standard bi-directional.
Walter noted that EPP mode worked OK for him under 3.4, but did not
under -current. Oddly
On Wed, 08 Mar 2000, Walter Brameld wrote:
On Wed, 08 Mar 2000, F. Heinrichmeyer wrote:
It works if you can switch your parallel port to EPP (???) mode in the
bios. Transfer speed raises also under windows with this configuration
btw.
Thanks again for the advice. For the record, that
On Wed, 08 Mar 2000, in a never-ending search for enlightenment, J McKitrick wrote:
Here is a concern i have. I had a hard time getting my parallel port
zip to work under 3.4. It turned out there may be a bug in my bios
that required me to change from EPP mode to standard bi-directional.
On Thu, Jan 20, 2000 at 12:26:08PM +0100, F. Heinrichmeyer wrote:
Subject says all! This evening i will try a patch for the ata driver so
maybe all my
hardware at home will work again with current when certain patches are
applied.
Nice. The newbus architecture introduces overhead in I/O and
On Sat, 22 Jan 2000, Nicolas Souchu wrote:
On Thu, Jan 20, 2000 at 12:26:08PM +0100, F. Heinrichmeyer wrote:
Subject says all! This evening i will try a patch for the ata driver so
maybe all my
hardware at home will work again with current when certain patches are
applied.
Nice. The
On Sat, Jan 22, 2000 at 10:03:25AM +, Doug Rabson wrote:
Nice. The newbus architecture introduces overhead in I/O and old chipsets
(or old compatible modes) do not always support it.
Your drive runs really faster too, doesn't it?
Have you measured the overhead? I think it should be
Subject says all! This evening i will try a patch for the ata driver so
maybe all my
hardware at home will work again with current when certain patches are
applied.
--
Fritz Heinrichmeyer mailto:[EMAIL PROTECTED]
FernUniversitaet Hagen, LG ES, 58084 Hagen (Germany)
tel:+49 2331/987-1166
On Sun, Jan 16, 2000 at 03:21:16PM +0100, F. Heinrichmeyer wrote:
My parallel port zip-drive stopped working this weekend with the new ppc
code. There is no printer attached:
Hmm, any chance to change parallel port bios setting on your MB?
--
Fritz Heinrichmeyer mailto:[EMAIL PROTECTED
My parallel port zip-drive stopped working this weekend with the new ppc
code. There is no printer attached:
Here are the relevant parts of dmesg and the kernel config file.
(First what CPU etc.)
CPU: AMD-K6(tm) 3D processor (262.36-MHz 586-class CPU)
Origin = "AuthenticAMD"
12 matches
Mail list logo
