On 21 Oct 1999, Ville-Pertti Keinonen wrote:
Stephen Roome [EMAIL PROTECTED] writes:
As the title says, is anyone working on support for Athlons, and when can we
expect it to arrive back in -stable ?
Athlons don't need any special support, they are fully compatible with
Intel's latest
On 22 Oct 1999 00:37:41 -0400, in sentex.lists.freebsd.current you wrote:
At 2:33 PM -0400 1999/10/20, Mike Tancsa wrote:
I have been playing for now with RAID 0 to get a sense of various
performance settings, which can dramatically effect bonnie and iozone
results. e.g. Write Back vs write
MachineMB K/sec %CPU K/sec %CPU K/sec %CPU K/sec %CPU K/sec %CPU /sec
%CPU
40 16341 99.1 20746 38.3 20307 52.7 14187 100.0 94033 98.2
9744.2 99.8
v.s.
Seeker 1...Seeker 2...Seeker 3...start 'em...done...done...done...
---Sequential Output
At 02:09 PM 10/22/99 +0100, Geoff Buckingham wrote:
The near 100 CPU use during the seek test combined with very high numbers of
Thanks for the pointers. It certainly gives me direction to look in. This
is my first foray into RAID, so I am just starting exploring the
technology. Also, my first
I'm going to be using either a wavelanII (wi0) or a 3com (ep0)
on my laptop. I'd like to have the rc.conf's specify how to
configure each. Then I'd like to have the one that is in the
machine to be configured. In the current /etc/ether_pccard there
is $pccard_ifconfig which is used as args
Luoqi Chen wrote:
I cannot compile a kernel. It reports the following errors:
Did the patch files.diff apply cleanly? It should add one line to each of
the sys/conf/files and sys/i386/conf/files.i386, please make sure they
are there.
The patches did not apply cleanly (maybe I should
From: "Matthew N. Dodd" [EMAIL PROTECTED]
Subject: 3c509 testers wanted!
I've rewritten the ISA bus front end code for if_ep and would like to
solicit testers.
ftp://ftp.jurai.net/users/winter/patches/if_ep.diff
You'll have to edit sys/i386/isa/isa_compat.h and remove all the
references to
On Fri, 22 Oct 1999, Igor B. Bykhalo wrote:
Can it be applied to:
ns: {1} uname -a
FreeBSD ns.binep.ac.ru 3.1-STABLE FreeBSD 3.1-STABLE #0: Wed Sep 29 21:54:10 MSD 1999
[EMAIL PROTECTED] :/usr/src/sys/compile/BINEP.ega i386
Nope. :/
Email me your kernel config file and I'll send you a
On Thu, Oct 21, 1999 at 05:41:40PM +0200, Erik H. Bakke wrote:
snip
Here is the patch as I got it.
I can't give you any guarantees of anything, though, but it should be worth
a try.
If it solves your problem, drop a message on -current and let us know.
snip
Thanks for the patch. I applied
On Fri, 22 Oct 1999, Dan Nelson wrote:
In the last episode (Oct 22), Stephen Roome said:
The issues I was trying to raise were really about better
optimization for Athlons, and later generations of CPU's, as follows
Optimization issues should be brought up on the egcs mailinglists,
since
Of all the gin joints in all the towns in all the world, Boris Popov had
to walk into mine and say:
On Wed, 20 Oct 1999, Bill Paul wrote:
install -c -s -o root -g wheel -m 555 mount_nwfs /vol2/release/sbin
install: mount_nwfs: No such file or directory
Ok, it seems that I
Suppose I need to install on a bunch of machines. What I'd do, is
install once, get all the pieces/ports/customizations right and then
make a tarball of the system. To install the next machine, I'd use
sysinstall to partition and label the new machine and then just nfs
mount the machine with
I have just started to play with the Mylex Controler and I get
"attempt to write beyond end of drive"
When trying to write to the drive.
mlx0: Mylex version 3 RAID interface irq 15 at device 10.0 on pci0
mlx0: Mylex DAC960P/PD, 1 channel, firmware 3.51, 4MB RAM
mlxd0: Mylex System Drive on
Hello,
recently i've got the following problem with proftpd.
this daemon (pre8) worked ok until one of recent "make world"s. after
that it started to deny any non-anonymous logins with the following
diags:
Oct 23 00:18:11 camel proftpd[76540]: PAM(camel): Authentication failure
Oct 23
*sigh*
Athlons don't need any special support, they are fully compatible with
Intel's latest processors.
I realise that special support is not required, but better optimised support
would be nice.
You are, as always, welcome to contribute.
(I can't find anything in the latest
At 12:25 AM 10/23/99 +0400, Ilya Naumov wrote:
Hello,
recently i've got the following problem with proftpd.
this daemon (pre8) worked ok until one of recent "make world"s. after
that it started to deny any non-anonymous logins with the following
diags:
Oct 23 00:18:11 camel proftpd[76540]:
OK. I managed to get sio and ep working on the plane back from
FreeBSDCon'99. There are some problems with card eject at the moment,
but will be committing things to the tree shortly.
Basically, I completely gutted the compatibilty layer and it became
much easier. More later after I've had a
I'm having a problem with vinum. Clue for the clue-less would be
appreciated.
My config file:
drive a device /dev/da3
drive b device /dev/da4
volume vol1
plex org striped 16k
sd length 2777m drive a
sd length 2777m drive b
When I create a config within vinum I get:
vinum - create -f
Thanks very much for this driver, Luoqi.
I am using it in a -current built from October 14 sources,
with a new kernel of course. The cdrom produces the following,
though:
Oct 22 14:14:35 two /kernel: Waiting 15 seconds for SCSI devices to settle
Oct 22 14:14:35 two /kernel:
OK. I'm getting ready to commit the sio modem changes to make it work
with pccard. This is a heads up that how ep is configured has changed
to be more sane for pccard, and also that things may be massively
unstable for a few days. That's the nature of current. I have a
couple of minor issues
20 matches
Mail list logo