Re: EFI boot partition overwritten

[Andrey Fesenko]

On Fri, Jul 16, 2021 at 3:15 PM Thomas Laus  wrote:
>
> Since CURRENT receives more updates to the EFI boot loader than the
> release versions, there should be instructions in the CURRENT
> 'usr/src/UPDATING' file on how to update the EFI bootcode.
>

Old systems have little efi part 800K or smaller and require creating
new, end of disk or cut swap.

Re: update to RC4 from RC3 shutdown regression

[Andrey Fesenko]

https://bugs.freebsd.org/bugzilla/show_bug.cgi?id=254698 bug with
screen panic CURRENT snapshot

On Thu, Apr 1, 2021 at 2:03 PM Antonio Olivares  wrote:
>
> On Wednesday, March 31, 2021, Glen Barber  wrote:
> > On Tue, Mar 30, 2021 at 07:54:45PM -0500, Antonio Olivares wrote:
> >> Dear all,
> >>
> >> after updating to RC4 with
> >> # freebsd-update -r upgrade 13.0RC4
> >> When I shutdown, I get error messages AE_??? PCI
> >>
> >>
> >> Press any key to reboot
> >>
> >> It shutdown before from 13.0-BETA4 updated all the way to RC3. I can
> save a
> >> screenshot if needed.  Thanks.
> >
> > Please do.
> >
> > Glen
> >
>
> I managed.to save a picture but on an older phone(flip flop mickey mouse
> phone). I will try to attach here. I just shutdown from xfce menu( after
> adding some code that permits this).
>
> Best Regards,
>
> Antonio
>
>
> >
> ___
> freebsd-current@freebsd.org mailing list
> https://lists.freebsd.org/mailman/listinfo/freebsd-current
> To unsubscribe, send any mail to "freebsd-current-unsubscr...@freebsd.org"
___
freebsd-current@freebsd.org mailing list
https://lists.freebsd.org/mailman/listinfo/freebsd-current
To unsubscribe, send any mail to "freebsd-current-unsubscr...@freebsd.org"

Re: update to RC4 from RC3 shutdown regression

[Andrey Fesenko]

On Wed, Mar 31, 2021 at 7:37 PM Glen Barber  wrote:
>
> On Wed, Mar 31, 2021 at 11:22:58AM -0500, Antonio Olivares wrote:
> > On Wed, Mar 31, 2021 at 11:03 AM Glen Barber  wrote:
> > >
> > > On Tue, Mar 30, 2021 at 07:54:45PM -0500, Antonio Olivares wrote:
> > > > Dear all,
> > > >
> > > > after updating to RC4 with
> > > > # freebsd-update -r upgrade 13.0RC4
> > > > When I shutdown, I get error messages AE_??? PCI
> > > >
> > > >
> > > > Press any key to reboot
> > > >
> > > > It shutdown before from 13.0-BETA4 updated all the way to RC3. I can 
> > > > save a
> > > > screenshot if needed.  Thanks.
> > >
> > > Please do.
> > >
> >
> > Dear Sir,
> >
> > I shutdown today to see if I got the same message, but I did not.  If
> > I do encounter this again, I will do my best to save a screenshot and
> > post it.
> >
>
> Okay, thank you.
>

Hello
my build box kvm-efi (centos edk2.git-ovmf-x64
0-20201222.1581.g98ff7e3c63) buider start  endless freeze reboot and
shutdown -p now (set hw.efi.poweroff=0 not fix)
virtualbox windows host, reboot work fine shutdown -p require set
hw.efi.poweroff=0
FreeBSD new uefi-edk2-bhyve g20210214,2 work fine,
uefi-edk2-bhyve-0.2_1,1 shutdown -p require set hw.efi.poweroff=0 (not
regression RC3)
___
freebsd-current@freebsd.org mailing list
https://lists.freebsd.org/mailman/listinfo/freebsd-current
To unsubscribe, send any mail to "freebsd-current-unsubscr...@freebsd.org"

Possible regression stuck after poweroff 13-CURRENT

[Andrey Fesenko]

FreeBSD 13.0-BETA4 (CURRENT long time many month) shutdown -p now
(poweroff, acpi stop) not stop bhyve maybe over virtualization (host
windows virtualbox), reboot work fine

https://64.media.tumblr.com/6a1b267b6dfa4d04c7d72fd88ba6e752/9c2e7d3110ca9df4-9a/s640x960/8120345e7062cc26ac2b331b3bbe6b590705d32c.png

on host endless run process
29366 root 37  211  M52M kqread   1   7:04 100.92%
bhyve: gmirror (bhyve)
___
freebsd-current@freebsd.org mailing list
https://lists.freebsd.org/mailman/listinfo/freebsd-current
To unsubscribe, send any mail to "freebsd-current-unsubscr...@freebsd.org"

UFS Resize Not Working Bug 253754

[Andrey Fesenko]

Hello long time not work growfs root

13.0-BETA4 and Current, bhyve and vmware check.

Bump https://bugs.freebsd.org/bugzilla/show_bug.cgi?id=253754
___
freebsd-current@freebsd.org mailing list
https://lists.freebsd.org/mailman/listinfo/freebsd-current
To unsubscribe, send any mail to "freebsd-current-unsubscr...@freebsd.org"

Re: ZFS BE not booting

[Andrey Fesenko]

On Thu, May 28, 2020 at 5:26 PM marco
 wrote:
>
> On Thu, May 28, 2020 at 07:56:10AM +, you (marco) sent the following to 
> [freebsd-current] :
> > make[1]: stopped in /usr/src
> > *** [installworld] Error code 2
> >
> > make: stopped in /usr/src
> >
> > make: stopped in /usr/src
> >
> > Not sure how I ended up in that situation exactly.
> > Think I'm going to destroy that r360723 BE for now and create a new one
> > for a later revision and do the build world, kernel and install kernel
> > dance and will make notes of all the steps I've taken should the update
> > fail at some point.
> >
>
> I decided creating a new BE for r361307 and am now running that revision
> using the following steps:
>
> - destroyed the BE
> - created a new one for r361307 and activated it
> - rebooted
> - updated /usr/src to r361307
> - make buildworld
> - make buildkernel
> - make installkernel
> - portsnap fetch update
> - make reinstall of graphics/drm-current-kmod
> - mergemaster -Fp
> - reboot
> - make installworld
> - mergemaster -Fi
> - make delete-old
> - final reboot
>
> [~] bectl list -aDs
> BE/Dataset/Snapshot  Active Mountpoint Space Created
>
> r359556
>   zroot/ROOT/r359556 -  -  440K  
> 2020-04-03 20:05
> zroot/ROOT/r361307@2020-05-28-07:40:34-0 -  -  6.35G 
> 2020-05-28 07:40
>
> r361307
>   zroot/ROOT/r361307 NR /  19.7G 
> 2020-05-28 07:40
>   r361307@2020-05-28-07:40:34-0  -  -  6.35G 
> 2020-05-28 07:40
>

too more reboot

make buildworld
make buildkernel
beadm create xxx
beadm mount xxx /mnt
make installkernel DESTDIR=/mnt
mergemaster -Fp -D /mnt
make installworld DESTDIR=/mnt
mergemaster -Fi -D /mnt
make delete-old DESTDIR=/mnt
make delete-old-libs DESTDIR=/mnt
make reinstall of graphics/drm-current-kmod (add key destdir)
beadm umount xxx
beadm activate xxx
reboot
___
freebsd-current@freebsd.org mailing list
https://lists.freebsd.org/mailman/listinfo/freebsd-current
To unsubscribe, send any mail to "freebsd-current-unsubscr...@freebsd.org"

Re: When will the FreeBSD (u)EFI work?

[Andrey Fesenko]

On Sat, Mar 28, 2020 at 12:14 PM Toomas Soome  wrote:
>
>
>
> > On 28. Mar 2020, at 05:28, Chris  wrote:
> >
> > On Fri, 27 Mar 2020 18:31:50 -0700 bsd-li...@bsdforge.com 
> > <mailto:bsd-li...@bsdforge.com> said
> >
> >> On Fri, 27 Mar 2020 17:27:27 -0600 Warner Losh i...@bsdimp.com said
> >> > On Fri, Mar 27, 2020 at 4:54 PM Chris  wrote:
> >> > > > On Sat, 28 Mar 2020 01:10:37 +0300 Andrey Fesenko f0and...@gmail.com 
> >> > > > said
> >> > >
> >> > > > On Sat, Mar 28, 2020 at 12:53 AM Chris  
> >> > > > wrote:
> >> > > > >
> >> > > > > On an experiment of the FreeBSD EFI implementation. I installed
> >> > > > > a copy of releng/12 from install media. Which left me with:
> >> > > > > # gpart show ada0
> >> > > > > =>   40  312581728  ada0  GPT  (149G)
> >> > > > >  40 409600 1  efi  (200M)
> >> > > > >  409640   31047680 2  freebsd-ufs  (15G)
> >> > > > >31457320768 3  freebsd-swap  (3.7G)
> >> > > > >74788904  237792864- free -  (141G)
> >> > > > >
> >> > > > > On this Intel based system, I can stab the F12 key to pick
> >> > > > > my UEFI bootable OS, or let it boot according to the order
> >> > > > > I setup in the BIOS. So far, so good.
> >> > > > > I needed a copy of releng/13 to also work with. Installed a copy
> >> > > > > from install media. Which left me with:
> >> > > > > # gpart show ada0
> >> > > > > =>   40  312581728  ada0  GPT  (149G)
> >> > > > >  40 409600 1  efi  (200M)
> >> > > > >  409640   31047680 2  freebsd-ufs  (15G)
> >> > > > >31457320768 3  freebsd-swap  (3.7G)
> >> > > > >39137320 532480 4  efi  (260M)
> >> > > > >39669800   35119104 5  freebsd-ufs  (17G)
> >> > > > >74788904  237792864- free -  (113G)
> >> > > > > I *assumed* that the install would activate the new install, and I
> >> > > > > would boot straight into it. But no. I am still on the previous
> >> > > > > install, and worse, I can't get into the new install -- even if
> >> > > > > picking it via stabbing the F12 key. I *still* end up in the 
> >> > > > > previous
> >> > > > > install. So looking at what might be causing it. I found the
> >> > following:
> >> > > > > # releng/12
> >> > > > > # mount -t msdosfs /dev/ada0p1 /mnt/
> >> > > > >
> >> > > > > # ls /mnt/efi/boot/
> >> > > > > BOOTx64.efi
> >> > > > > startup.nsh
> >> > > > >
> >> > > > > # cat /mnt/efi/boot/startup.nsh
> >> > > > > BOOTx64.efi
> >> > > > >
> >> > > > > # umount /mnt/
> >> > > > >
> >> > > > > releng/13
> >> > > > > # mount -t msdosfs /dev/ada0p4 /mnt/
> >> > > > >
> >> > > > > # ls /mnt/EFI/freebsd/
> >> > > > > loader.efi
> >> > > > >
> >> > > > > Why the difference? When will FreeBSD (u)EFI work as expected?
> >> > > > >
> >> > > > > Thanks in advance for any insights!
> >> > > > >
> >> > > >
> >> > > > Require only single efi part
> >> > > >
> >> > > > See
> >> > > >
> >> > >
> >> > https://forums.freebsd.org/threads/two-freebsd-installations-and-efi.73968/
> >> > > Thanks for they reply, and link, Andrey!
> >> > > Well that confirms it. FreeBSD, unlike other OS implementations, will 
> >> > > not
> >> > > permit booting your chosen "version" via EFI.
> >> > > Firstly, *huge* thanks for your informative reply, Warner!
> >> > It does today. If you use efibootmgr, you can boot exactly what you 
> >> > want. I
> >> > do it all the time...  Though your BIOS may overwrite the EFI vars if you
> >> > set too many (I'm looking at you sup

Re: ZFS: destroying snapshots without compromising boot environments

[Andrey Fesenko]

On Sat, Mar 28, 2020 at 10:30 AM Graham Perrin  wrote:
>
> I imagine that some of the 2019 snapshots below are redundant.
>
> Can I safely destroy any of them?
>
> $ zfs list -t snapshot
> NAME USED AVAIL
> REFER  MOUNTPOINT
> copperbowl/ROOT/Waterfox@2020-03-20-06:19:4567.0M -  59.2G  -
> copperbowl/ROOT/r359249b@2019-08-18-04:04:535.82G -  40.9G  -
> copperbowl/ROOT/r359249b@2019-08-18-11:28:314.32G -  40.7G  -
> copperbowl/ROOT/r359249b@2019-09-13-18:45:27-0  9.43G -  43.4G  -
> copperbowl/ROOT/r359249b@2019-09-19-20:03:265.13G -  43.3G  -
> copperbowl/ROOT/r359249b@2019-09-24-20:45:59-0  7.67G -  44.6G  -
> copperbowl/ROOT/r359249b@2020-01-09-17:05:57-0  7.66G -  55.2G  -
> copperbowl/ROOT/r359249b@2020-01-11-14:15:477.41G -  56.2G  -
> copperbowl/ROOT/r359249b@2020-03-17-21:57:1712.0G -  59.2G  -
> copperbowl/iocage/releases/12.0-RELEASE/root@jbrowsers 8K -  1.24G  -
> copperbowl/poudriere/jails/head@clean328K -  1.89G  -
> $ beadm list
> BE   Active Mountpoint  Space Created
> Waterfox -  -   12.2G 2020-03-10 18:24
> r357746f -  -1.3G 2020-03-20 06:19
> r359249b NR /  148.9G 2020-03-28 01:19
> $ beadm list -aDs
> BE/Dataset/Snapshot  Active Mountpoint
> Space Created
>
> Waterfox
>copperbowl/ROOT/Waterfox   -  - 137.0M
> 2020-03-10 18:24
>  r359249b@2020-03-17-21:57:17 - -   59.2G
> 2020-03-17 21:57
>copperbowl/ROOT/Waterfox@2020-03-20-06:19:45   - -   67.0M
> 2020-03-20 06:19
>
> r357746f
>copperbowl/ROOT/r357746f   - -1.2G
> 2020-03-20 06:19
>  Waterfox@2020-03-20-06:19:45 - -   59.2G
> 2020-03-20 06:19
>
> r359249b
>copperbowl/ROOT/r359249b@2019-08-18-04:04:53   - -5.8G
> 2019-08-18 04:04
>copperbowl/ROOT/r359249b@2019-08-18-11:28:31   - -4.3G
> 2019-08-18 11:28
>copperbowl/ROOT/r359249b@2019-09-13-18:45:27-0 - -9.4G
> 2019-09-13 18:45
>copperbowl/ROOT/r359249b@2019-09-19-20:03:26   - -5.1G
> 2019-09-19 20:03
>copperbowl/ROOT/r359249b@2019-09-24-20:45:59-0 - -7.7G
> 2019-09-24 20:45
>copperbowl/ROOT/r359249b@2020-01-09-17:05:57-0 - -7.7G
> 2020-01-09 17:05
>copperbowl/ROOT/r359249b@2020-01-11-14:15:47   - -7.4G
> 2020-01-11 14:15
>copperbowl/ROOT/r359249b@2020-03-17-21:57:17   - -   12.0G
> 2020-03-17 21:57
>copperbowl/ROOT/r359249b   NR /   59.0G
> 2020-03-28 01:19
> $


beadm destroy ? ;)
___
freebsd-current@freebsd.org mailing list
https://lists.freebsd.org/mailman/listinfo/freebsd-current
To unsubscribe, send any mail to "freebsd-current-unsubscr...@freebsd.org"

Re: When will the FreeBSD (u)EFI work?

[Andrey Fesenko]

On Sat, Mar 28, 2020 at 12:53 AM Chris  wrote:
>
> On an experiment of the FreeBSD EFI implementation. I installed
> a copy of releng/12 from install media. Which left me with:
> # gpart show ada0
> =>   40  312581728  ada0  GPT  (149G)
>  40 409600 1  efi  (200M)
>  409640   31047680 2  freebsd-ufs  (15G)
>31457320768 3  freebsd-swap  (3.7G)
>74788904  237792864- free -  (141G)
>
> On this Intel based system, I can stab the F12 key to pick
> my UEFI bootable OS, or let it boot according to the order
> I setup in the BIOS. So far, so good.
> I needed a copy of releng/13 to also work with. Installed a copy
> from install media. Which left me with:
> # gpart show ada0
> =>   40  312581728  ada0  GPT  (149G)
>  40 409600 1  efi  (200M)
>  409640   31047680 2  freebsd-ufs  (15G)
>31457320768 3  freebsd-swap  (3.7G)
>39137320 532480 4  efi  (260M)
>39669800   35119104 5  freebsd-ufs  (17G)
>74788904  237792864- free -  (113G)
> I *assumed* that the install would activate the new install, and I
> would boot straight into it. But no. I am still on the previous
> install, and worse, I can't get into the new install -- even if
> picking it via stabbing the F12 key. I *still* end up in the previous
> install. So looking at what might be causing it. I found the following:
> # releng/12
> # mount -t msdosfs /dev/ada0p1 /mnt/
>
> # ls /mnt/efi/boot/
> BOOTx64.efi
> startup.nsh
>
> # cat /mnt/efi/boot/startup.nsh
> BOOTx64.efi
>
> # umount /mnt/
>
> releng/13
> # mount -t msdosfs /dev/ada0p4 /mnt/
>
> # ls /mnt/EFI/freebsd/
> loader.efi
>
> Why the difference? When will FreeBSD (u)EFI work as expected?
>
> Thanks in advance for any insights!
>

Require only single efi part

See https://forums.freebsd.org/threads/two-freebsd-installations-and-efi.73968/
___
freebsd-current@freebsd.org mailing list
https://lists.freebsd.org/mailman/listinfo/freebsd-current
To unsubscribe, send any mail to "freebsd-current-unsubscr...@freebsd.org"

Re: EFI loader failure, after 20191114-r354699 Z87MX-D3H

[Andrey Fesenko]

On Thu, Nov 28, 2019 at 11:31 PM Toomas Soome  wrote:
>
> > On 28. Nov 2019, at 22:20, Andrey Fesenko  wrote:
> >
> > Fixed
> >
>
> Thanks. And yea, that one is nasty. I have some guess but nothing too solid… 
> it may take time to get figured out.
>
> Have you tested BIOS boot?
>
> rgds,
> toomas
>
> > On Thu, Nov 28, 2019 at 11:18 PM Toomas Soome  wrote:
> >>
> >>
> >>
> >> On 28. Nov 2019, at 22:16, Andrey Fesenko  wrote:
> >>
> >> On Thu, Nov 28, 2019 at 3:03 PM Toomas Soome  wrote:
> >>
> >>
> >> hi!
> >>
> >> I did try to reach you, but mail did bounce back…
> >>
> >> unicast ping me:)
> >>
> >> rgds,
> >> toomas
> >>
> >> On 28. Nov 2019, at 11:43, Andrey Fesenko  wrote:
> >>
> >> Hello,
> >>
> >> Around starting 20191114 r354699 (memstick tested), my desktop not
> >> boot normally. Boot only loader menu (black and white mode) after
> >> start i'm see load modules, after this monitor gray, and 15-20s
> >> disabled, system block not disable but run silently. system not boot.
> >>
> >> If i'm change efi  (EFI/BOOT/bootx64.efi), 20191031-r354207 or 12.1
> >> release, system boot normally
> >>
> >>
> >>
> >> This video boot second version (Name: "loader.efi") 545 KB
> >> https://bsdnir.info/files/efi_fail.mp4
> >>
> >>
> >> 403 Forbidden
> >>
> >> :=)
> >>
> >> rgds,
> >> toomas
>

New news ;)

r359151 i'm make memstick with custom refind
/mnt/
`-- EFI
|-- BOOT
|   |-- bootx64.efi - refind
|-- freebsd
|   `-- loader.efi  - freebsd not boot
|-- freebsd_lua
|   `-- loader_lua.efi - not boot
|-- freebsd_simple
|   `-- loader_simp.efi - boot fine
___
freebsd-current@freebsd.org mailing list
https://lists.freebsd.org/mailman/listinfo/freebsd-current
To unsubscribe, send any mail to "freebsd-current-unsubscr...@freebsd.org"

Re: what 3rd party boot mgr is required to boot multiple freebsd versions?

[Andrey Fesenko]

On Tue, Mar 17, 2020 at 1:24 AM Chris  wrote:
>
> I'm attempting to boot multiple versions of FreeBSD.
> I started with an install of older 11 with a (u)efi
> boot partition installed. I then grabbed an current 11
> usbstick, and installed that. Which stated it needed to
> install a (u)efi boot partition. I let it do it. But the
> new (additional) install doesn't show up at boot. Altho
> my UEFI BIOS sees it.
> I guess there are just too many uefi bios versions,
> and too many changes in the FreeBSD uefi boot code
> to expect consistent results over the long haul.
> Should I just convert the 1st efi (GPT) boot partition
> to a PMBR, and delete the second efi partition. Or is
> there a recommended bootmanager I can use to boot multiple
> versions of FreeBSD? Windows?
>

upgrade system and use
https://www.freebsd.org/cgi/man.cgi?query=efibootmgr=8=freebsd-release-ports
;)
___
freebsd-current@freebsd.org mailing list
https://lists.freebsd.org/mailman/listinfo/freebsd-current
To unsubscribe, send any mail to "freebsd-current-unsubscr...@freebsd.org"

Re: Pkg repository is broken...

[Andrey Fesenko]

On Sun, Mar 8, 2020 at 12:02 AM Michael Tuexen  wrote:
>
>
>
> > On 7. Mar 2020, at 21:37, Michael Gmelin  wrote:
> >
> >
> >
> >> On 7. Mar 2020, at 19:01, Michael Tuexen  wrote:
> >>
> >> 
> >>>
>  On 7. Mar 2020, at 18:18, Michael Gmelin  wrote:
> 
> 
> 
> > On 7. Mar 2020, at 18:08, Michael Tuexen  wrote:
> 
>  
> >
> > On 7. Mar 2020, at 16:46, Michael Gmelin  wrote:
> >
> >
> >
> >> On Sat, 07 Mar 2020 11:30:58 -0400
> >> Waitman Gobble  wrote:
> >>
> >> On 2020-03-07 05:10, Ronald Klop wrote:
> >>> On Sat, 07 Mar 2020 01:38:55 +0100, Greg 'groggy' Lehey
> >>>  wrote:
> >>>
>  On Friday,  6 March 2020 at 12:29:44 +0100, Lars Engels wrote:
> > On Wed, Mar 04, 2020 at 03:16:14PM +1100, Greg 'groggy' Lehey
> > wrote:
> >>
> >> Any workarounds in the meantime?  This must affect a lot of
> >> people, including those who use 12-:
> >>
> >> pkg: wrong architecture: FreeBSD:12.0:amd64 instead of
> >> FreeBSD:12:amd64
> >> pkg: repository FreeBSD contains packages with wrong ABI:
> >> FreeBSD:12.0:amd64
> >
> > Still broken for me on 12.1.
> 
>  Strange.  Mine cleared up automatically the following day.
> 
>  It's also strange how few replies I have received.  Two private
>  messages (why?), yours, and that was it.  You'd think that people
>  would be screaming.
> 
>  Greg
> >>>
> >>>
> >>> I'm not screaming because I'm settling with the situation and
> >>> starting to make workarounds.
> >>> And wondering where the official communication of the community is.
> >>> Nothing about this situation on www.freebsd.org. All information
> >>> about the situation seems scattered through the mailinglists.
> >>>
> >>> Things are working for me on 13-CURRENT again, but still broken on
> >>> 12.1-RELEASE. See attachment.
> >>>
> >>> Ronald.
> >>> ___
> >>> freebsd-current@freebsd.org mailing list
> >>> https://lists.freebsd.org/mailman/listinfo/freebsd-current
> >>> To unsubscribe, send any mail to
> >>> "freebsd-current-unsubscr...@freebsd.org"
> >>
> >>
> >> Did you try:
> >> pkg update -f
> >>
> >>
> >> I installed 12.1 on a new laptop yesterday, I have not experienced
> >> issues with pkg.
> >>
> >
> > This was only an issue on the "latest" branch. If you don't alter
> > "/etc/pkg/FreeBSD.conf", you'll get packages from the "quarterly"
> > branch, which fortunately wasn't affected.
> 
>  Any idea what is wrong on a stable/12 machine:
> 
>  tuexen@stable12:~ % sudo pkg update
>  Password:
>  Updating FreeBSD repository catalogue...
>  pkg: repository meta has wrong version 2
>  pkg: Repository FreeBSD load error: meta cannot be loaded No error: 0
>  Fetching meta.txz: 100%916 B   0.9kB/s00:01
>  pkg: repository meta has wrong version 2
>  repository FreeBSD has no meta file, using default settings
>  Fetching packagesite.txz: 100%6 MiB 586.4kB/s00:11
>  pkg: repository meta has wrong version 2
>  pkg: Repository FreeBSD load error: meta cannot be loaded No error: 0
>  Unable to open created repository FreeBSD
>  Unable to update repository FreeBSD
>  Error updating repositories!
>  tuexen@stable12:~ % sudo pkg update -f
>  Updating FreeBSD repository catalogue...
>  pkg: repository meta has wrong version 2
>  pkg: Repository FreeBSD load error: meta cannot be loaded No error: 0
>  Fetching meta.txz: 100%916 B   0.9kB/s00:01
>  pkg: repository meta has wrong version 2
>  repository FreeBSD has no meta file, using default settings
>  Fetching packagesite.txz: 100%6 MiB 645.0kB/s00:10
>  pkg: repository meta has wrong version 2
>  pkg: Repository FreeBSD load error: meta cannot be loaded No error: 0
>  Unable to open created repository FreeBSD
>  Unable to update repository FreeBSD
>  Error updating repositories!
>  tuexen@stable12:~ % sudo pkg upgrade
>  Updating FreeBSD repository catalogue...
>  pkg: repository meta has wrong version 2
>  pkg: Repository FreeBSD load error: meta cannot be loaded No error: 0
>  Fetching meta.txz: 100%916 B   0.9kB/s00:01
>  pkg: repository meta has wrong version 2
>  repository FreeBSD has no meta file, using default settings
>  Fetching packagesite.txz: 100%6 MiB 586.4kB/s00:11
>  pkg: repository meta has wrong version 2
>  pkg: Repository FreeBSD load error: meta cannot be loaded No error: 0
>  Unable to open created repository FreeBSD
>  Unable to update repository FreeBSD
>  Error updating repositories!
>  tuexen@stable12:~ % uname -U
>  1201512
>  

Re: 13-Current not format efi partition

[Andrey Fesenko]

ср, 12 февр. 2020 г., 06:23 Thomas Mueller :

> from Andrey Fesenko:
>
> > bsdinstall script, work in 2019
>
>  PARTITIONS="$DISKSLICE GPT { 512K freebsd-boot, 1M efi, auto freebsd-ufs
> / }
>  #!/bin/sh -x
>  # Make diskname independante
>  gpart modify -l freebsd-boot -i 1 ada0
>  gpart modify -l efi -i 2 ada0
>  gpart modify -l root -i 3 ada0
>  # Make EFI happy
>  mount_msdosfs /dev/gpt/efi /media/
>  mkdir -p /media/EFI/BOOT/
>  cp /boot/loader.efi /media/EFI/BOOT/BOOTX86.efi
>  umount /media/
>
> > FreeBSD-13.0-CURRENT-amd64-20200206-r357606-disc1.iso not format efi
> partition
>
>
> Booting by UEFI would not use or need a freebsd-boot partition.
>

freebsd-boot it's another bug :) it's create automatically, anyway

Add newfs_msdos /dev/gpt/efi fix new behavior installer, but why

>
___
freebsd-current@freebsd.org mailing list
https://lists.freebsd.org/mailman/listinfo/freebsd-current
To unsubscribe, send any mail to "freebsd-current-unsubscr...@freebsd.org"

13-Current not format efi partition

[Andrey Fesenko]

bsdinstall script, work in 2019

 PARTITIONS="$DISKSLICE GPT { 512K freebsd-boot, 1M efi, auto freebsd-ufs / }
 #!/bin/sh -x
 # Make diskname independante
 gpart modify -l freebsd-boot -i 1 ada0
 gpart modify -l efi -i 2 ada0
 gpart modify -l root -i 3 ada0
 # Make EFI happy
 mount_msdosfs /dev/gpt/efi /media/
 mkdir -p /media/EFI/BOOT/
 cp /boot/loader.efi /media/EFI/BOOT/BOOTX86.efi
 umount /media/

FreeBSD-13.0-CURRENT-amd64-20200206-r357606-disc1.iso not format efi partition
___
freebsd-current@freebsd.org mailing list
https://lists.freebsd.org/mailman/listinfo/freebsd-current
To unsubscribe, send any mail to "freebsd-current-unsubscr...@freebsd.org"

Re: EFI loader failure, after 20191114-r354699 Z87MX-D3H

[Andrey Fesenko]

On Thu, Nov 28, 2019 at 11:31 PM Toomas Soome  wrote:
>
>
>
> > On 28. Nov 2019, at 22:20, Andrey Fesenko  wrote:
> >
> > Fixed
> >
>
> Thanks. And yea, that one is nasty. I have some guess but nothing too solid… 
> it may take time to get figured out.
>
> Have you tested BIOS boot?
>
> rgds,
> toomas
>
> > On Thu, Nov 28, 2019 at 11:18 PM Toomas Soome  wrote:
> >>
> >>
> >>
> >> On 28. Nov 2019, at 22:16, Andrey Fesenko  wrote:
> >>
> >> On Thu, Nov 28, 2019 at 3:03 PM Toomas Soome  wrote:
> >>
> >>
> >> hi!
> >>
> >> I did try to reach you, but mail did bounce back…
> >>
> >> unicast ping me:)
> >>
> >> rgds,
> >> toomas
> >>
> >> On 28. Nov 2019, at 11:43, Andrey Fesenko  wrote:
> >>
> >> Hello,
> >>
> >> Around starting 20191114 r354699 (memstick tested), my desktop not
> >> boot normally. Boot only loader menu (black and white mode) after
> >> start i'm see load modules, after this monitor gray, and 15-20s
> >> disabled, system block not disable but run silently. system not boot.
> >>
> >> If i'm change efi  (EFI/BOOT/bootx64.efi), 20191031-r354207 or 12.1
> >> release, system boot normally
> >>
> >>
> >>
> >> This video boot second version (Name: "loader.efi") 545 KB
> >> https://bsdnir.info/files/efi_fail.mp4
> >>
> >>
> >> 403 Forbidden
> >>
> >> :=)
> >>
> >> rgds,
> >> toomas
>

BIOS boot fine, loader colored, installer start normal.
___
freebsd-current@freebsd.org mailing list
https://lists.freebsd.org/mailman/listinfo/freebsd-current
To unsubscribe, send any mail to "freebsd-current-unsubscr...@freebsd.org"

Re: EFI loader failure, after 20191114-r354699 Z87MX-D3H

[Andrey Fesenko]

Fixed

On Thu, Nov 28, 2019 at 11:18 PM Toomas Soome  wrote:
>
>
>
> On 28. Nov 2019, at 22:16, Andrey Fesenko  wrote:
>
> On Thu, Nov 28, 2019 at 3:03 PM Toomas Soome  wrote:
>
>
> hi!
>
> I did try to reach you, but mail did bounce back…
>
> unicast ping me:)
>
> rgds,
> toomas
>
> On 28. Nov 2019, at 11:43, Andrey Fesenko  wrote:
>
> Hello,
>
> Around starting 20191114 r354699 (memstick tested), my desktop not
> boot normally. Boot only loader menu (black and white mode) after
> start i'm see load modules, after this monitor gray, and 15-20s
> disabled, system block not disable but run silently. system not boot.
>
> If i'm change efi  (EFI/BOOT/bootx64.efi), 20191031-r354207 or 12.1
> release, system boot normally
>
>
>
> This video boot second version (Name: "loader.efi") 545 KB
> https://bsdnir.info/files/efi_fail.mp4
>
>
> 403 Forbidden
>
> :=)
>
> rgds,
> toomas
___
freebsd-current@freebsd.org mailing list
https://lists.freebsd.org/mailman/listinfo/freebsd-current
To unsubscribe, send any mail to "freebsd-current-unsubscr...@freebsd.org"

Re: EFI loader failure, after 20191114-r354699 Z87MX-D3H

[Andrey Fesenko]

On Thu, Nov 28, 2019 at 9:20 PM Andrey Fesenko  wrote:
>
> On Thu, Nov 28, 2019 at 1:24 PM Eugene Grosbein  wrote:
> >
> > 28.11.2019 16:43, Andrey Fesenko wrote:
> >
> > > Hello,
> > >
> > > Around starting 20191114 r354699 (memstick tested), my desktop not
> > > boot normally. Boot only loader menu (black and white mode) after
> > > start i'm see load modules, after this monitor gray, and 15-20s
> > > disabled, system block not disable but run silently. system not boot.
> >
> > So loader works. Try breaking to loader prompt and do:
> >
> > set hw.vga.acpi_ignore_no_vga=1
> > boot
> >
>
> Hm new test, new problems. Old and new efi, if breaking to loader
> prompt work only alphabet keys, nums not work :) (on notebook loader
> work fine)
> If make
> echo 'hw.vga.acpi_ignore_no_vga=1' > /boot/loader.conf
>
> on flash, and reboot, not fix boot.

Correction number and underline work, but set
hw.vga.acpi_ignore_no_vga not fix boot
___
freebsd-current@freebsd.org mailing list
https://lists.freebsd.org/mailman/listinfo/freebsd-current
To unsubscribe, send any mail to "freebsd-current-unsubscr...@freebsd.org"

Re: EFI loader failure, after 20191114-r354699 Z87MX-D3H

[Andrey Fesenko]

On Thu, Nov 28, 2019 at 3:03 PM Toomas Soome  wrote:
>
> hi!
>
> I did try to reach you, but mail did bounce back…
>
> unicast ping me:)
>
> rgds,
> toomas
>
> > On 28. Nov 2019, at 11:43, Andrey Fesenko  wrote:
> >
> > Hello,
> >
> > Around starting 20191114 r354699 (memstick tested), my desktop not
> > boot normally. Boot only loader menu (black and white mode) after
> > start i'm see load modules, after this monitor gray, and 15-20s
> > disabled, system block not disable but run silently. system not boot.
> >
> > If i'm change efi  (EFI/BOOT/bootx64.efi), 20191031-r354207 or 12.1
> > release, system boot normally
> >
>

This video boot second version (Name: "loader.efi") 545 KB
https://bsdnir.info/files/efi_fail.mp4
___
freebsd-current@freebsd.org mailing list
https://lists.freebsd.org/mailman/listinfo/freebsd-current
To unsubscribe, send any mail to "freebsd-current-unsubscr...@freebsd.org"

Re: EFI loader failure, after 20191114-r354699 Z87MX-D3H

[Andrey Fesenko]

On Thu, Nov 28, 2019 at 1:24 PM Eugene Grosbein  wrote:
>
> 28.11.2019 16:43, Andrey Fesenko wrote:
>
> > Hello,
> >
> > Around starting 20191114 r354699 (memstick tested), my desktop not
> > boot normally. Boot only loader menu (black and white mode) after
> > start i'm see load modules, after this monitor gray, and 15-20s
> > disabled, system block not disable but run silently. system not boot.
>
> So loader works. Try breaking to loader prompt and do:
>
> set hw.vga.acpi_ignore_no_vga=1
> boot
>

Hm new test, new problems. Old and new efi, if breaking to loader
prompt work only alphabet keys, nums not work :) (on notebook loader
work fine)
If make
echo 'hw.vga.acpi_ignore_no_vga=1' > /boot/loader.conf

on flash, and reboot, not fix boot.
___
freebsd-current@freebsd.org mailing list
https://lists.freebsd.org/mailman/listinfo/freebsd-current
To unsubscribe, send any mail to "freebsd-current-unsubscr...@freebsd.org"

EFI loader failure, after 20191114-r354699 Z87MX-D3H

[Andrey Fesenko]

Hello,

Around starting 20191114 r354699 (memstick tested), my desktop not
boot normally. Boot only loader menu (black and white mode) after
start i'm see load modules, after this monitor gray, and 15-20s
disabled, system block not disable but run silently. system not boot.

If i'm change efi  (EFI/BOOT/bootx64.efi), 20191031-r354207 or 12.1
release, system boot normally

My notebook x220 work fine any loaders.

desktop
BIOS Information
Vendor: American Megatrends Inc.
Version: F2
Release Date: 05/03/2013
Address: 0xF
Runtime Size: 64 kB
ROM Size: 16 MB
Characteristics:
PCI is supported
BIOS is upgradeable
BIOS shadowing is allowed
Boot from CD is supported
Selectable boot is supported
BIOS ROM is socketed
EDD is supported
5.25"/1.2 MB floppy services are supported (int 13h)
3.5"/720 kB floppy services are supported (int 13h)
3.5"/2.88 MB floppy services are supported (int 13h)
Print screen service is supported (int 5h)
8042 keyboard services are supported (int 9h)
Serial services are supported (int 14h)
Printer services are supported (int 17h)
ACPI is supported
USB legacy is supported
BIOS boot specification is supported
Targeted content distribution is supported
UEFI is supported
BIOS Revision: 4.6

Handle 0x0001, DMI type 1, 27 bytes
System Information
Manufacturer: Gigabyte Technology Co., Ltd.
Product Name: Z87MX-D3H
Version: To be filled by O.E.M.
Serial Number: To be filled by O.E.M.
UUID: 03de0294-0480-057d-0c06-7a0700080009
Wake-up Type: Power Switch
SKU Number: To be filled by O.E.M.
Family: To be filled by O.E.M.
___
freebsd-current@freebsd.org mailing list
https://lists.freebsd.org/mailman/listinfo/freebsd-current
To unsubscribe, send any mail to "freebsd-current-unsubscr...@freebsd.org"

Bhyve ACPICA 20191018 crach guests

[Andrey Fesenko]

https://bugs.freebsd.org/bugzilla/show_bug.cgi?id=241399

tested r353887 and r354013, freebsd and linux bhyve guests

 lldb -c /bhyve.core /usr/sbin/bhyve
 (lldb) target create "/usr/sbin/bhyve" --core "/bhyve.core"
 Core file '/bhyve.core' (x86_64) was loaded.
 (lldb) bt
 * thread #1, name = 'bhyve', stop reason = signal SIGABRT
  * frame #0: 0x0008007fa50a libc.so.7`__sys_thr_kill at thr_kill.S:4
frame #1: 0x0008007f9eb4 libc.so.7`__raise(s=6) at raise.c:52:10
frame #2: 0x00080076de39 libc.so.7`abort at abort.c:67:8
frame #3: 0x0008007e8131
libc.so.7`__assert(func=,   file=,
line=, failedexpr=) at assert.c:51:2
frame #4: 0x0021fb42 bhyve`main(argc=,
argv=) at bhyverun.c:1190:3
frame #5: 0x0021b10f bhyve`_start(ap=,
cleanup=) at crt1.c:76:7
 (lldb) quit

cbsd bstart debian-cbsd
cloud-init: enabled
init_systap: waiting for link: em0
VRDP is enabled. VNC bind/port: 127.0.0.1:5900
For attach VM console, use: vncviewer 127.0.0.1:5900
Resolution: 1024x768.
bhyve renice: 1
Execute master script: cloud_init_set_netname.sh
 :: /cbsd/jails-system/debian-cbsd/master_prestart.d/cloud_init_set_netname.sh
Waiting for PID..
PID: 0
/tmp/bhyve.QRxK8qZ 53: [0001]   ProcessorId : FF
Error6313 -Invalid field label detected ^  (found
"ProcessorId" expected "Processor ID")

/tmp/bhyve.QRxK8qZ 57: [0001]   Interrupt : 01
Error6313 -  Invalid field label detected ^  (found "Interrupt"
expected "Interrupt Input LINT")

Assertion failed: (error == 0), function main, file
/usr/src/usr.sbin/bhyve/bhyverun.c, line 1190.
fbuf frame buffer base: 0x84360 [sz 16777216]
stdio -l bootrom,/usr/local/cbsd/upgrade/patch/efi.fd   debian-cbsd
-
Please use for debug: sh /usr/local/cbsd/share/bhyverun.sh -c
/cbsd/jails-system/debian-cbsd/bhyve.conf
___
freebsd-current@freebsd.org mailing list
https://lists.freebsd.org/mailman/listinfo/freebsd-current
To unsubscribe, send any mail to "freebsd-current-unsubscr...@freebsd.org"

Re: Booting anything after r352057 kills console

[Andrey Fesenko]

On Mon, Sep 23, 2019 at 11:51 PM Poul-Henning Kamp  wrote:
>
> 
> In message 
> 
> , Warner Losh writes:
>
> >We are working on making drm ports less problematic on upgrade...
>
> Yes, I know.
>
> But when you track current, it seems that it takes a port-reinstall
> to get on that wagon...
>

beadm/bectl rules

1) make world/kernel
2) install in new BE
3) make new pkg drm
4) install it in new BE too
5) activate
6) reboot
___
freebsd-current@freebsd.org mailing list
https://lists.freebsd.org/mailman/listinfo/freebsd-current
To unsubscribe, send any mail to "freebsd-current-unsubscr...@freebsd.org"

r346941 boot environment in loader broken?

[Andrey Fesenko]

In loader not work change boot environment, sub menu open, change not
work, simple reset menu.
___
freebsd-current@freebsd.org mailing list
https://lists.freebsd.org/mailman/listinfo/freebsd-current
To unsubscribe, send any mail to "freebsd-current-unsubscr...@freebsd.org"

Re: leaked swap?

[Andrey Fesenko]

On Mon, Mar 18, 2019 at 6:23 PM Andriy Gapon  wrote:
>
>
> First, a note that this was observed on a system that runs a fairly old 
> current
> (~ 1 year old) with a fairly long uptime (> 6 months).
> I noticed that the system was nearly out of memory, 98% of swap was in use,
> there was less than 1 GB of free memory, several GBs of each of active, 
> inactive
> and laundry memory, and many GBs of wired (mostly ZFS).
> I decided to pro-actively reboot the system, but to speed that up I put the
> system to the single-user mode (via shutdown) and then back to multi-user. So,
> there was no real hardware reboot and the kernel kept running.  However, all
> userland processes were terminated.
>
> To my surprise, even while in the single-user mode the swap utilization didn't
> go below 70%.  Also, laundry memory remained in multi-GB area, but let's 
> ignore
> this for now.
>
> I think that the swap could be used only for anonymous memory, so I expected 
> it
> go to zero after the shutdown to the single user mode.
> Does anyone have any ideas?
> Maybe that's something that has already been fixed?
> If not, any ideas on what to look for?
> Thanks!
>

Not this? ZFS use wired and not clean only reboot?
https://reviews.freebsd.org/D7538?id=25108
___
freebsd-current@freebsd.org mailing list
https://lists.freebsd.org/mailman/listinfo/freebsd-current
To unsubscribe, send any mail to "freebsd-current-unsubscr...@freebsd.org"

Re: change in uname -a behaviour between 12-ALPHA5 and 12-ALPHA7

[Andrey Fesenko]

See WITH_REPRODUCIBLE_BUILD
https://lists.freebsd.org/pipermail/freebsd-current/2018-September/071125.html

On Wed, Sep 26, 2018 at 4:23 PM, tech-lists  wrote:
> Hello,
>
> uname -a used to show a string including the date and where the kernel was
> compiled:
>
> FreeBSD 12.0-ALPHA5 #0 r338518: Fri Sep  7 02:13:14 UTC 2018
> r...@releng3.nyi.freebsd.org:/usr/obj/usr/src/amd64.amd64/sys/GENERIC
>
> It no longer does:
>
> root@REDACTED:/etc# uname -a
> FreeBSD REDACTED.REDACTED.org 12.0-ALPHA7 FreeBSD 12.0-ALPHA7 r338903
> REDACTED  amd64
>
> How can I get the old behaviour back?
>
> thanks,
>
> --
> J.
> ___
> freebsd-current@freebsd.org mailing list
> https://lists.freebsd.org/mailman/listinfo/freebsd-current
> To unsubscribe, send any mail to "freebsd-current-unsubscr...@freebsd.org"
___
freebsd-current@freebsd.org mailing list
https://lists.freebsd.org/mailman/listinfo/freebsd-current
To unsubscribe, send any mail to "freebsd-current-unsubscr...@freebsd.org"

Spam in console after r336593 (NFS mounted)

[Andrey Fesenko]

Hello.
After https://svnweb.freebsd.org/base?view=revision=336593
any make action starting spam errors (svn not work on NFS mounted
partitions)

svn: E155016: The working copy database at '/usr/src' is corrupt.
svn: E155016: The working copy database at '/usr/src' is corrupt.
make[2]: "/usr/src/release/Makefile.ec2" line 24: warning:
"/usr/local/bin/svn info --show-item last-changed-revision /usr/sr
c/release/.." returned non-zero status
svn: E155016: The working copy database at '/usr/src' is corrupt.
svn: E155016: The working copy database at '/usr/src' is corrupt.
make[2]: "/usr/src/release/Makefile.ec2" line 24: warning:
"/usr/local/bin/svn info --show-item last-changed-revision /usr/sr
c/release/.." returned non-zero status
___
freebsd-current@freebsd.org mailing list
https://lists.freebsd.org/mailman/listinfo/freebsd-current
To unsubscribe, send any mail to "freebsd-current-unsubscr...@freebsd.org"

Re: make buildworld broken at r317821 (libsysdecode)

[Andrey Fesenko]

On Sat, May 6, 2017 at 2:52 AM, Ngie Cooper  wrote:
> On Fri, May 5, 2017 at 4:43 PM, Cy Schubert  wrote:
>
> ...
>
>> You have a bad DIMM. I had this same problem on my laptop but not on my
>> servers downstairs. That suggested that since all four machines were
>> running the same software the difference between them was hardware.
>> Replacing the memory in my laptop made this problem go away.
>>
>> I have a question for you. Do you use ZFS? ZFS exercises memory quite
>> aggressively. I also had this problem when I replaced my UFS filesystems
>> with ZFS on my testbed many moons ago. It even suffered random kernel
>> panics. Here again, replacing the memory resolved the issue.
>
> We need more information first before saying "bad hardware" -- in
> particular, was the machine overtaxed, were the input files proper,
> etc?
>
> I'm asking because clang has a number of bugs in bugzilla where the
> host ran out of memory trying to compile things and clang didn't fail
> gracefully when allocating memory, handling inputs, etc.
>
> Thanks,
> -Ngie

Sorry, really my root ZFS pool is corrupt :(
___
freebsd-current@freebsd.org mailing list
https://lists.freebsd.org/mailman/listinfo/freebsd-current
To unsubscribe, send any mail to "freebsd-current-unsubscr...@freebsd.org"

Re: make buildworld broken at r317821 (libsysdecode)

[Andrey Fesenko]

On Fri, May 5, 2017 at 8:41 PM, Kyle Evans  wrote:
> On Fri, May 5, 2017 at 9:31 AM, Kyle Evans  wrote:
>
>> On May 5, 2017 8:39 AM, "Dimitry Andric"  wrote:
>>
>>
>> This appears to be caused by bsdgrep. :-/ The build for lib/libsysdecode
>> uses a shell script, mkioctls, to generate a ioctl.c file at build time.
>> This script contains the following fragment:
>>
>> ioctl_includes=$(
>> cd $includedir
>> find -H -s * -name '*.h' | \
>> egrep -v '(.*disk.*|net/pfvar|net/if_pfsync)\.h' | \
>> xargs egrep -l \
>> '^#[]*define[   ]+[A-Za-z_][A-Za-z0-9_]*[   ]+_IO[^a-z0-9_]' |
>> awk '{printf("#include <%s>\\n", $1)}'
>> )
>>
>> The idea is that all headers are searched for defines of ioctl macros,
>> which start with _IO.  The -l option to egrep is used to print only the
>> matching filenames, not the matched content itself.
>>
>> However, this option seems to be broken in bsdgrep, as it *does* display
>> the matched content:
>>
>> $ gnugrep -l printf /usr/include/stdio.h
>> /usr/include/stdio.h
>>
>> $ bsdgrep -l printf /usr/include/stdio.h
>> #define __SSTR  0x0200  /* this is an sprintf/snprintf string */
>> /usr/include/stdio.h
>>
>> I did a quick check, and this option seems to have been accidentally
>> broken by r317703 [1] ("bsdgrep: fix -w flag matching with an empty
>> pattern").
>>
>> Ed, Kyle, any idea where the problem might be?
>>
>> -Dimitry
>>
>> [1] https://svnweb.freebsd.org/base?view=revision=317703
>>
>>
>> Hi,
>>
>> This is addressed by https://reviews.freebsd.org/D10607
>>
>
> FYI- This has now been committed as r317842. Apologies for the breakage,
> and thanks for the reports!

Build not fixed (but is built slightly, a little more) :(

# uname -a
FreeBSD des.local 12.0-CURRENT FreeBSD 12.0-CURRENT #0 r317592: Sat
Apr 29 21:32:04 MSK 2017 root@des.local:/usr/obj/usr/src/sys/DES
amd64

# svnlite info
Path: .
Working Copy Root Path: /usr/src
URL: https://svn0.eu.freebsd.org/base/head
Relative URL: ^/head
Repository Root: https://svn0.eu.freebsd.org/base
Repository UUID: ccf9f872-aa2e-dd11-9fc8-001c23d0bc1f
Revision: 317842
Node Kind: directory
Schedule: normal
Last Changed Author: emaste
Last Changed Rev: 317842
Last Changed Date: 2017-05-05 20:35:05 +0300 (Fri, 05 May 2017)

# make -j1 buildworld
make[1]: "/usr/src/Makefile.inc1"
line 160: SYSTEM_COMPILER: Determined that CC=cc matches the source
tree.  Not bootstrapping a cross-compiler.
...
===> lib/clang/libllvmminimal (obj,all,install)
/usr/obj/usr/src/tmp/usr/src/lib/clang/libllvmminimal created for
/usr/src/lib/clang/libllvmminimal
/usr/obj/usr/src/tmp/usr/src/lib/clang/libllvmminimal/Support created
for /usr/src/lib/clang/libllvmminimal
/usr/obj/usr/src/tmp/usr/src/lib/clang/libllvmminimal/TableGen created
for /usr/src/lib/clang/libllvmminimal
c++  -O2 -pipe -I/usr/src/lib/clang/include
-I/usr/src/contrib/llvm/include -DLLVM_ON_UNIX -DLLVM_ON_FREEBSD
-D__STDC_LIMIT_M
ACROS -D__STDC_CONSTANT_MACROS
-DLLVM_DEFAULT_TARGET_TRIPLE=\"x86_64-unknown-freebsd12.0\"
-DLLVM_HOST_TRIPLE=\"x86_64-unknow
n-freebsd12.0\" -DDEFAULT_SYSROOT=\"/usr/obj/usr/src/tmp\"
-ffunction-sections -fdata-sections -MD -MF.depend.Support_APInt.o
 -MTSupport/APInt.o -Qunused-arguments
-I/usr/obj/usr/src/tmp/legacy/usr/include -std=c++11 -fno-exceptions
-fno-rtti  -stdli
b=libc++ -Wno-c++11-extensions  -c
/usr/src/contrib/llvm/lib/Support/APInt.cpp -o Support/APInt.o
c++: error: unable to execute command: Segmentation fault (core
dumped)
c++: error: clang frontend command failed due to signal (use -v to see
invocation)
FreeBSD clang version 4.0.0 (tags/RELEASE_400/final 297347) (based on
LLVM 4.0.0)
Target: x86_64-unknown-freebsd12.0
Thread model: posix
InstalledDir: /usr/bin
c++: note: diagnostic msg: PLEASE submit a bug report to
https://bugs.freebsd.org/submit/ and include the crash backtrace, p$
eprocessed source, and associated run script.
...
___
freebsd-current@freebsd.org mailing list
https://lists.freebsd.org/mailman/listinfo/freebsd-current
To unsubscribe, send any mail to "freebsd-current-unsubscr...@freebsd.org"

Re: i915kms breakage

[Andrey Fesenko]

On Fri, Apr 28, 2017 at 10:10 PM, Maurizio Vairani
 wrote:
> 2017-04-22 14:47 GMT+02:00 Domagoj Stolfa :
>
>> Hello,
>>
>> ever since I've merged yesterday, it would seem that the i915kms driver
>> panics every time it is loaded. Unfortunately, I am not able to provide
>> a dump of the panic, as I am unable to see what the panic is, or what is
>> even going on as a matter of fact due to my screen being overtaken by
>> a driver that has just panicked. call doadump() does not seem to work
>> either.
>>
>> Is anyone else having these problems, or know where the issue might be
>> occurring?
>>
>> The same happens with 12.0-CURRENT r317513 updated yesterday. The laptop
> is a Samsung NP270E5E with Intel Graphics 4000,
> http://www.samsung.com/us/computer/pcs/NP270E5E-K02US-specs
> --

i5 r317402 and r317437 run only single mode, after r317561 work Xorg again :)
___
freebsd-current@freebsd.org mailing list
https://lists.freebsd.org/mailman/listinfo/freebsd-current
To unsubscribe, send any mail to "freebsd-current-unsubscr...@freebsd.org"

Re: rpi-b leds

[Andrey Fesenko]

On Tue, Aug 23, 2016 at 1:00 AM, Luiz Otavio O Souza <lists...@gmail.com> wrote:
> On 22 August 2016 at 08:55, Andrey Fesenko wrote:
>> On Mon, Aug 22, 2016 at 1:29 PM, Daniel Braniss wrote:
>>> Hi,
>>> I see that now both leds on the rpi-2 are operational,
>>> any chance it can happen on the rpi-b too?
>>>
>>
>> A year or two ago, rpi-b had operational leds, it's make not working
>> after rework fdt/std layer
>
> I tested the leds on two different rpi-b and the leds are working.
> Maybe you are talking about the b+ model ?
>
> The ACT or OK led for the old boards (< b+) are wired to gpio 16. The
> b+ has two leds, they are wired to pins 47 and 35.
>
> For a quick fix, edit your dts and the leds will work.
>
> Can you check the board revision for your rpi ? (sysctl hw.board.revision)
>
> These are the ones I tested:
>
> hw.board.revision: 3
> hw.board.revision: 14
>
> Tested with r301978.
>
> Luiz

Sorry for misinformation

Raspberry Pi Model B (Rev 2.0, 512Mb): hw.board.revision: 15

leds work after complete boot
___
freebsd-current@freebsd.org mailing list
https://lists.freebsd.org/mailman/listinfo/freebsd-current
To unsubscribe, send any mail to "freebsd-current-unsubscr...@freebsd.org"

Re: rpi-b leds

[Andrey Fesenko]

On Mon, Aug 22, 2016 at 1:29 PM, Daniel Braniss  wrote:
> Hi,
> I see that now both leds on the rpi-2 are operational,
> any chance it can happen on the rpi-b too?
>

A year or two ago, rpi-b had operational leds, it's make not working
after rework fdt/std layer
___
freebsd-current@freebsd.org mailing list
https://lists.freebsd.org/mailman/listinfo/freebsd-current
To unsubscribe, send any mail to "freebsd-current-unsubscr...@freebsd.org"

Re: EFI zfs loader and beadm?

[Andrey Fesenko]

On Fri, Mar 11, 2016 at 10:52 AM, krad <kra...@gmail.com> wrote:
> Its also worth pointing that if you decouple the userland from the kernel
> files you no longer have a boot environment, as all the basic stuff to boot
> the os isn't contained within the bootfs. I'm still struggling to see why
> /boot needs to be on a different dataset, its just a bit of a linuxism.
>
> On 10 March 2016 at 19:23, Trond Endrestøl
> <trond.endres...@fagskolen.gjovik.no> wrote:
>>
>> On Thu, 10 Mar 2016 18:38+0300, Andrey Fesenko wrote:
>>
>> > On Thu, Mar 10, 2016 at 6:11 PM, krad <kra...@gmail.com> wrote:
>> > > As Eric said you cant have /boot on a separate dataset as the whole
>> > > loader
>> > > bootstrap isnt designed too look for it on the dataset defined by
>> > > bootfs.
>> > > Remember no other datasets are mounted at that stage of the bootstrap.
>> > >
>> > > You could maybe bodge something by manually playing around with the
>> > > bootfs
>> > > property, symlinks and rootfs variables in the loader.conf.  But why
>> > > would
>> > > you want to do this? It's more work and non standard, and will break a
>> > > lot?
>> > >
>> > >
>> > >
>> > > On 10 March 2016 at 12:11, Andrey Fesenko <f0and...@gmail.com> wrote:
>> > >>
>> > >> On Thu, Mar 10, 2016 at 2:55 PM, krad <kra...@gmail.com> wrote:
>> > >> > presumably it boots now?
>> > >> >
>> > >> > On 10 March 2016 at 11:01, Andrey Fesenko <f0and...@gmail.com>
>> > >> > wrote:
>> > >> >>
>> > >> >> On Thu, Mar 10, 2016 at 1:49 PM, krad <kra...@gmail.com> wrote:
>> > >> >> > Make sure you are running the latest snapshot of current or 10.3
>> > >> >> > as
>> > >> >> > well, as
>> > >> >> > the MFC commits were in early February for 10-stable
>> > >> >> >
>> > >> >> >>
>> > >> >> >> If remove efiwpool/ROOT/init/boot and copy his content on
>> > >> >> >> efiwpool/ROOT/init my scheme work fine too.
>> > >> >> >> /usr /var /home and other included in BE for consistent boot
>> > >> >> >> system
>> > >> >> >> (CURRENT world may not boot with kernel other rev),  and old
>> > >> >> >> home
>> > >> >> >> snapshot sometimes useful for backup/restore
>> > >> >> >> ___
>> > >> >>
>> > >> >> % uname -a
>> > >> >> FreeBSD x220.efi.local 11.0-CURRENT FreeBSD 11.0-CURRENT #0
>> > >> >> r296548:
>> > >> >> Wed Mar  9 01:16:17 MSK 2016
>> > >> >> root@des.local:/usr/obj/usr/src/sys/X220  amd64
>> > >> >
>> > >> >
>> > >>
>> > >> My current working config
>> > >> % mount
>> > >> 
>> > >>
>> > >> This work fine, booted, beadm create new env, activate them, see boot
>> > >> menu and select BE.
>> > >>
>> > >> % beadm list
>> > >> BEActive Mountpoint  Space Created
>> > >> init  -  -  420.7M 2016-03-09 02:57
>> > >> init0 NR /   35.9G 2016-03-10 05:00
>> > >>
>> > >> If i'm add separate dataset for /boot (efiwpool/ROOT/init0/boot)
>> > >> system not booted, efi loader (first stage) see only my pool, not
>> > >> found /boot/loader.efi
>> > >
>> > >
>> >
>> > It probably does not matter, as bootfs have snapshots (BE), just
>> > wanted to make it more clear (having taken significant mountpoint
>> > /boot, /usr, /var... in zfs dataset) and was surprised why the system
>> > does not boot
>> >
>> > It is clear that as long as the functionality is experimental and
>> > under development, but would like to see where the full instructions
>> > on its implementation / restrictions, at least as early as has been
>> > described https://wiki.freebsd.org/RootOnZFS
>>
>> If you keep /boot as a separate dataset/filesystem, with
>> efiwpool/ROOT/init0/boot as the given bootfs, then boot1.efi will not
>> see a /boot directory inside that dataset. The files and directories
>> from /boot will be presented as living in /, the local root directory
>> of that dataset.
>>
>> You could create a /boot/boot symlink pointing to . (dot), but it's
>> better to let /boot be part of the regular boot environment, pretty
>> similar to what you would find on a UFS system using a separate root
>> filesystem.
>>

why?
On the contrary, my scheme involves the entire system as a single BE
(including home)

> linuxism
Is unlikely, to rather an attempt to use all the features ZFS. ZFS
also many possible settings for each dataset/FS (compression, atime,
exec..) Probably for /boot many of them unnecessary, but such
separate extra snapshots, can would not be harmful
___
freebsd-current@freebsd.org mailing list
https://lists.freebsd.org/mailman/listinfo/freebsd-current
To unsubscribe, send any mail to "freebsd-current-unsubscr...@freebsd.org"

Re: EFI zfs loader and beadm?

[Andrey Fesenko]

On Thu, Mar 10, 2016 at 6:11 PM, krad <kra...@gmail.com> wrote:
> As Eric said you cant have /boot on a separate dataset as the whole loader
> bootstrap isnt designed too look for it on the dataset defined by bootfs.
> Remember no other datasets are mounted at that stage of the bootstrap.
>
> You could maybe bodge something by manually playing around with the bootfs
> property, symlinks and rootfs variables in the loader.conf.  But why would
> you want to do this? It's more work and non standard, and will break a lot?
>
>
>
> On 10 March 2016 at 12:11, Andrey Fesenko <f0and...@gmail.com> wrote:
>>
>> On Thu, Mar 10, 2016 at 2:55 PM, krad <kra...@gmail.com> wrote:
>> > presumably it boots now?
>> >
>> > On 10 March 2016 at 11:01, Andrey Fesenko <f0and...@gmail.com> wrote:
>> >>
>> >> On Thu, Mar 10, 2016 at 1:49 PM, krad <kra...@gmail.com> wrote:
>> >> > Make sure you are running the latest snapshot of current or 10.3 as
>> >> > well, as
>> >> > the MFC commits were in early February for 10-stable
>> >> >
>> >> >>
>> >> >> If remove efiwpool/ROOT/init/boot and copy his content on
>> >> >> efiwpool/ROOT/init my scheme work fine too.
>> >> >> /usr /var /home and other included in BE for consistent boot system
>> >> >> (CURRENT world may not boot with kernel other rev),  and old home
>> >> >> snapshot sometimes useful for backup/restore
>> >> >> ___
>> >>
>> >> % uname -a
>> >> FreeBSD x220.efi.local 11.0-CURRENT FreeBSD 11.0-CURRENT #0 r296548:
>> >> Wed Mar  9 01:16:17 MSK 2016
>> >> root@des.local:/usr/obj/usr/src/sys/X220  amd64
>> >
>> >
>>
>> My current working config
>> % mount
>> 
>>
>> This work fine, booted, beadm create new env, activate them, see boot
>> menu and select BE.
>>
>> % beadm list
>> BEActive Mountpoint  Space Created
>> init  -  -  420.7M 2016-03-09 02:57
>> init0 NR /   35.9G 2016-03-10 05:00
>>
>> If i'm add separate dataset for /boot (efiwpool/ROOT/init0/boot)
>> system not booted, efi loader (first stage) see only my pool, not
>> found /boot/loader.efi
>
>

It probably does not matter, as bootfs have snapshots (BE), just
wanted to make it more clear (having taken significant mountpoint
/boot, /usr, /var... in zfs dataset) and was surprised why the system
does not boot

It is clear that as long as the functionality is experimental and
under development, but would like to see where the full instructions
on its implementation / restrictions, at least as early as has been
described https://wiki.freebsd.org/RootOnZFS
___
freebsd-current@freebsd.org mailing list
https://lists.freebsd.org/mailman/listinfo/freebsd-current
To unsubscribe, send any mail to "freebsd-current-unsubscr...@freebsd.org"

Re: EFI zfs loader and beadm?

[Andrey Fesenko]

On Thu, Mar 10, 2016 at 2:55 PM, krad <kra...@gmail.com> wrote:
> presumably it boots now?
>
> On 10 March 2016 at 11:01, Andrey Fesenko <f0and...@gmail.com> wrote:
>>
>> On Thu, Mar 10, 2016 at 1:49 PM, krad <kra...@gmail.com> wrote:
>> > Make sure you are running the latest snapshot of current or 10.3 as
>> > well, as
>> > the MFC commits were in early February for 10-stable
>> >
>> >>
>> >> If remove efiwpool/ROOT/init/boot and copy his content on
>> >> efiwpool/ROOT/init my scheme work fine too.
>> >> /usr /var /home and other included in BE for consistent boot system
>> >> (CURRENT world may not boot with kernel other rev),  and old home
>> >> snapshot sometimes useful for backup/restore
>> >> ___
>>
>> % uname -a
>> FreeBSD x220.efi.local 11.0-CURRENT FreeBSD 11.0-CURRENT #0 r296548:
>> Wed Mar  9 01:16:17 MSK 2016
>> root@des.local:/usr/obj/usr/src/sys/X220  amd64
>
>

My current working config
% mount
efiwpool/ROOT/init0 on / (zfs, local, noatime, nfsv4acls)
devfs on /dev (devfs, local, multilabel)
efiwpool/ROOT/init0/tmp on /tmp (zfs, local, noatime, nosuid, nfsv4acls)
efiwpool/ROOT/init0/usr on /usr (zfs, local, noatime, nfsv4acls)
efiwpool/ROOT/init0/usr/home on /usr/home (zfs, local, noatime, nfsv4acls)
efiwpool/ROOT/init0/var on /var (zfs, local, noatime, nfsv4acls)
efiwpool/ROOT/init0/var/crash on /var/crash (zfs, local, noatime,
noexec, nosuid, nfsv4acls)
efiwpool/ROOT/init0/var/db on /var/db (zfs, local, noatime, noexec,
nosuid, nfsv4acls)
efiwpool/ROOT/init0/var/db/pkg on /var/db/pkg (zfs, local, noatime,
nosuid, nfsv4acls)
efiwpool/ROOT/init0/var/db/tlpkg on /var/db/tlpkg (zfs, local,
noatime, nosuid, nfsv4acls)
efiwpool/ROOT/init0/var/empty on /var/empty (zfs, local, noatime,
noexec, nosuid, read-only, nfsv4acls)
efiwpool/ROOT/init0/var/log on /var/log (zfs, local, noatime, noexec,
nosuid, nfsv4acls)
efiwpool/ROOT/init0/var/mail on /var/mail (zfs, local, noatime,
noexec, nosuid, nfsv4acls)
efiwpool/ROOT/init0/var/run on /var/run (zfs, local, noatime, noexec,
nosuid, nfsv4acls)
efiwpool/ROOT/init0/var/tmp on /var/tmp (zfs, local, noatime, nosuid, nfsv4acls)

=>   40  234441568  ada1  GPT  (112G)
 40   1600 1  efi  (800K)
   1640  234439960 2  freebsd-zfs  (112G)
  234441600  8- free -  (4.0K)

% zfs get -r mountpoint efiwpool
NAME  PROPERTY
VALUE  SOURCE
efiwpool  mountpoint  none
  local
efiwpool/ROOT mountpoint  none
  inherited from efiwpool
efiwpool/ROOT/initmountpoint
legacy local
efiwpool/ROOT/init/tmpmountpoint  /tmp
  local


This work fine, booted, beadm create new env, activate them, see boot
menu and select BE.

% beadm list
BEActive Mountpoint  Space Created
init  -  -  420.7M 2016-03-09 02:57
init0 NR /   35.9G 2016-03-10 05:00

If i'm add separate dataset for /boot (efiwpool/ROOT/init0/boot)
system not booted, efi loader (first stage) see only my pool, not
found /boot/loader.efi
___
freebsd-current@freebsd.org mailing list
https://lists.freebsd.org/mailman/listinfo/freebsd-current
To unsubscribe, send any mail to "freebsd-current-unsubscr...@freebsd.org"

Re: EFI zfs loader and beadm?

[Andrey Fesenko]

On Thu, Mar 10, 2016 at 1:49 PM, krad  wrote:
> Make sure you are running the latest snapshot of current or 10.3 as well, as
> the MFC commits were in early February for 10-stable
>
>>
>> If remove efiwpool/ROOT/init/boot and copy his content on
>> efiwpool/ROOT/init my scheme work fine too.
>> /usr /var /home and other included in BE for consistent boot system
>> (CURRENT world may not boot with kernel other rev),  and old home
>> snapshot sometimes useful for backup/restore
>> ___

% uname -a
FreeBSD x220.efi.local 11.0-CURRENT FreeBSD 11.0-CURRENT #0 r296548:
Wed Mar  9 01:16:17 MSK 2016
root@des.local:/usr/obj/usr/src/sys/X220  amd64
___
freebsd-current@freebsd.org mailing list
https://lists.freebsd.org/mailman/listinfo/freebsd-current
To unsubscribe, send any mail to "freebsd-current-unsubscr...@freebsd.org"

Re: EFI zfs loader and beadm?

[Andrey Fesenko]

On Wed, Mar 9, 2016 at 6:48 PM, Eric van Gyzen <e...@vangyzen.net> wrote:
> On 03/09/2016 09:40, Andrey Fesenko wrote:
>> Hello,
>> I'm test EFI boot ZFSroot with BE, this not support now?
>> svn 2965489
>>
>> If i build simplest system
>> http://blog.multiplay.co.uk/2015/12/freebsd-10-2-release-efi-zfs-root-boot/
>>
>> # zfs get -r mountpoint efifpool
>> NAME  PROPERTYVALUE  SOURCE
>> efifpool  mountpoint  /mnt/efifpool  default
>>
>> =>  40  30712240  da0  GPT  (15G)
>> 40  16001  efi  (800K)
>>   1640  307106322  freebsd-zfs  (15G)
>>   30712272 8   - free -  (4.0K)
>>
>> system boot nice
>>
>> If make BE env
>>
>> # zfs get -r mountpoint efiwpool
>> NAME  PROPERTYVALUE  SOURCE
>> efiwpool  mountpoint  none   local
>> efiwpool/ROOT mountpoint  none
>> inherited from efiwpool
>> efiwpool/ROOT/initmountpoint  legacy local
>> efiwpool/ROOT/init@init   mountpoint  -  -
>> efiwpool/ROOT/init/boot   mountpoint  /media/bootlocal
>> efiwpool/ROOT/init/tmpmountpoint  /media/tmp local
>> efiwpool/ROOT/init/usrmountpoint  /media/usr local
>> efiwpool/ROOT/init/usr@init   mountpoint  -  -
>> efiwpool/ROOT/init/usr/home   mountpoint  /media/usr/home
>> inherited from efiwpool/ROOT/init/usr
>> efiwpool/ROOT/init/usr/home@init  mountpoint  -  -
>> efiwpool/ROOT/init/varmountpoint  /media/var local
>> efiwpool/ROOT/init/var@init   mountpoint  -  -
>> efiwpool/ROOT/init/var/crash  mountpoint  /media/var/crash
>> inherited from efiwpool/ROOT/init/var
>> efiwpool/ROOT/init/var/db mountpoint  /media/var/db
>> inherited from efiwpool/ROOT/init/var
>> efiwpool/ROOT/init/var/db/pkg mountpoint  /media/var/db/pkg
>> inherited from efiwpool/ROOT/init/var
>> efiwpool/ROOT/init/var/empty  mountpoint  /media/var/empty
>> inherited from efiwpool/ROOT/init/var
>> efiwpool/ROOT/init/var/logmountpoint  /media/var/log
>> inherited from efiwpool/ROOT/init/var
>> efiwpool/ROOT/init/var/mail   mountpoint  /media/var/mail
>> inherited from efiwpool/ROOT/init/var
>> efiwpool/ROOT/init/var/runmountpoint  /media/var/run
>> inherited from efiwpool/ROOT/init/var
>> efiwpool/ROOT/init/var/tmpmountpoint  /media/var/tmp
>> inherited from efiwpool/ROOT/init/var
>>
>> system not boot.
>>
>> Not found /boot/loader.efi (in BE system real path
>> efiwpool/ROOT/init/boot/loader.efi) if copy this efiwpool/ROOT/init
>> (blank in BE system) loader found this (but not found /boot/kernel) I
>> can copy this and get a similar system
>> https://bugs.freebsd.org/bugzilla/show_bug.cgi?id=192184#c15 (with out
>> msdos kernel part), but this ruin BE update mechanism
>
> Your dataset hierarchy is not what beadm expects.  Specifically, you
> have /boot separate from /, which I imagine is causing your problem.
> /boot should be part of /.  Also, you have several file systems in the
> BE that are usually not in it; I doubt this is part of your boot
> failure, though.
>
> For reference, here is my layout, which is mostly the same as the
> default installation:
>
> NAME  USED  AVAIL  REFER  MOUNTPOINT
> zroot 117G   108G96K  none
> zroot/ROOT   14.8G   108G96K  none
> zroot/ROOT/10.2   444K   108G  6.35G  /
> zroot/ROOT/103beta   14.8G   108G  8.75G  /
> zroot/ROOT/103beta1 8K   108G  8.17G  /
> zroot/ROOT/103beta3 8K   108G  8.75G  /
> zroot/home   97.8G   108G  94.9G  /home
> zroot/usr3.36G   108G96K  /usr
> zroot/usr/ports   985M   108G   736M  /usr/ports
> zroot/usr/src2.40G   108G  2.19G  /usr/src
> zroot/var2.19M   108G96K  /var
> zroot/var/audit96K   108G96K  /var/audit
> zroot/var/crash96K   108G96K  /var/crash
> zroot/var/log1.15M   108G   420K  /var/log
> zroot/var/mail360K   108G   120K  /var/mail
> zroot/var/tmp 416K   108G   144K  /var/tmp
>
> Eric

If remove efiwpool/ROOT/init/boot and copy his content on
efiwpool/ROOT/init my scheme work fine too.
/usr /var /home and other included in BE for consistent boot system
(CURRENT world may not boot with kernel other rev),  and old home
snapshot sometimes useful for backup/restore
___
freebsd-current@freebsd.org mailing list
https://lists.freebsd.org/mailman/listinfo/freebsd-current
To unsubscribe, send any mail to "freebsd-current-unsubscr...@freebsd.org"

EFI zfs loader and beadm?

[Andrey Fesenko]

Hello,
I'm test EFI boot ZFSroot with BE, this not support now?
svn 2965489

If i build simplest system
http://blog.multiplay.co.uk/2015/12/freebsd-10-2-release-efi-zfs-root-boot/

# zfs get -r mountpoint efifpool
NAME  PROPERTYVALUE  SOURCE
efifpool  mountpoint  /mnt/efifpool  default

=>  40  30712240  da0  GPT  (15G)
40  16001  efi  (800K)
  1640  307106322  freebsd-zfs  (15G)
  30712272 8   - free -  (4.0K)

system boot nice

If make BE env

# zfs get -r mountpoint efiwpool
NAME  PROPERTYVALUE  SOURCE
efiwpool  mountpoint  none   local
efiwpool/ROOT mountpoint  none
inherited from efiwpool
efiwpool/ROOT/initmountpoint  legacy local
efiwpool/ROOT/init@init   mountpoint  -  -
efiwpool/ROOT/init/boot   mountpoint  /media/bootlocal
efiwpool/ROOT/init/tmpmountpoint  /media/tmp local
efiwpool/ROOT/init/usrmountpoint  /media/usr local
efiwpool/ROOT/init/usr@init   mountpoint  -  -
efiwpool/ROOT/init/usr/home   mountpoint  /media/usr/home
inherited from efiwpool/ROOT/init/usr
efiwpool/ROOT/init/usr/home@init  mountpoint  -  -
efiwpool/ROOT/init/varmountpoint  /media/var local
efiwpool/ROOT/init/var@init   mountpoint  -  -
efiwpool/ROOT/init/var/crash  mountpoint  /media/var/crash
inherited from efiwpool/ROOT/init/var
efiwpool/ROOT/init/var/db mountpoint  /media/var/db
inherited from efiwpool/ROOT/init/var
efiwpool/ROOT/init/var/db/pkg mountpoint  /media/var/db/pkg
inherited from efiwpool/ROOT/init/var
efiwpool/ROOT/init/var/empty  mountpoint  /media/var/empty
inherited from efiwpool/ROOT/init/var
efiwpool/ROOT/init/var/logmountpoint  /media/var/log
inherited from efiwpool/ROOT/init/var
efiwpool/ROOT/init/var/mail   mountpoint  /media/var/mail
inherited from efiwpool/ROOT/init/var
efiwpool/ROOT/init/var/runmountpoint  /media/var/run
inherited from efiwpool/ROOT/init/var
efiwpool/ROOT/init/var/tmpmountpoint  /media/var/tmp
inherited from efiwpool/ROOT/init/var

system not boot.

Not found /boot/loader.efi (in BE system real path
efiwpool/ROOT/init/boot/loader.efi) if copy this efiwpool/ROOT/init
(blank in BE system) loader found this (but not found /boot/kernel) I
can copy this and get a similar system
https://bugs.freebsd.org/bugzilla/show_bug.cgi?id=192184#c15 (with out
msdos kernel part), but this ruin BE update mechanism
___
freebsd-current@freebsd.org mailing list
https://lists.freebsd.org/mailman/listinfo/freebsd-current
To unsubscribe, send any mail to "freebsd-current-unsubscr...@freebsd.org"

New i915 graphic and WXGA

[Andrey Fesenko]

Hello, i'm test new driver
https://wiki.freebsd.org/Graphics/Update%20i915%20GPU%20driver%20to%20Linux%203.8

My monitor have WXGA+ 16:10 1440 900, not correct detected, only 4:3
Modeline. Full log https://bsdnir.info/files/Xorg.i915_01-16.log

CPU: Intel(R) Core(TM) i5-4570 CPU @ 3.20GHz (3192.68-MHz K8-class CPU)
vgapci0@pci0:0:2:0: class=0x03 card=0xd0001458 chip=0x04128086
rev=0x06 hdr=0x00
vendor = 'Intel Corporation'
device = 'Xeon E3-1200 v3/4th Gen Core Processor Integrated
Graphics Controller'
class  = display
subclass   = VGA
___
freebsd-current@freebsd.org mailing list
https://lists.freebsd.org/mailman/listinfo/freebsd-current
To unsubscribe, send any mail to "freebsd-current-unsubscr...@freebsd.org"

Not load some moduls (zfs.ko vmm.ko) with loader.conf BUG 201679?

[Andrey Fesenko]

Current build not usable kernel (if use zfs on root system)

Loading /boot/defaults/loader.conf
/boot/kernel/kernel text=0x13e0b30 data=0x1...
+0x17ac14]
/boot/entropy size=0x1000
/boot/kernel/zfs.ko |
elf64_obj_loadimage: read failed

 (success load other .ko)
Hit [Enter] to boot immediately, or any other key for command prompt.
Booting [/boot/kernel/kernel]...

more details https://bugs.freebsd.org/bugzilla/show_bug.cgi?id=201679
___
freebsd-current@freebsd.org mailing list
https://lists.freebsd.org/mailman/listinfo/freebsd-current
To unsubscribe, send any mail to freebsd-current-unsubscr...@freebsd.org

Re: [CURRENT] r 285785: vt_core.c:(.text+0x42f): undefined reference to vt_logo_sprite_height'

[Andrey Fesenko]

On Wed, Jul 22, 2015 at 8:38 AM, O. Hartmann
ohart...@zedat.fu-berlin.de wrote:
 Recent sources (r285785) do not buildkernel due to the bug/error shown below:

 [...]
 linking kernel
 vt_core.o: In function `vtterm_cnprobe':
 /usr/src/sys/dev/vt/vt_core.c:(.text+0x42f): undefined reference to
 `vt_logo_sprite_height' /usr/src/sys/dev/vt/vt_core.c:(.text+0x46b): undefined
 reference to
 `vt_logo_sprite_height' /usr/src/sys/dev/vt/vt_core.c:(.text+0x4c5): undefined
 reference to
 `vt_logo_sprite_height' /usr/src/sys/dev/vt/vt_core.c:(.text+0x51b): undefined
 reference to
 `vt_logo_sprite_height' /usr/src/sys/dev/vt/vt_core.c:(.text+0x57d): undefined
 reference to `vt_logo_sprite_height'
 vt_core.o:/usr/src/sys/dev/vt/vt_core.c:(.text+0x2870): more undefined
 references to `vt_logo_sprite_height' follow vt_core.o: In function
 `vt_flush': /usr/src/sys/dev/vt/vt_core.c:(.text+0x4fb8): undefined reference
 to `vtterm_draw_cpu_logos' vt_core.o: In function
 `vt_scrollmode_kbdevent': /usr/src/sys/dev/vt/vt_core.c:(.text+0x5963):
 undefined reference to
 `vt_logo_sprite_height' /usr/src/sys/dev/vt/vt_core.c:(.text+0x5a98): 
 undefined
 reference to `vt_logo_sprite_height' *** [kernel] Error code 1



This commit 285765 and 285766 (D2181)
https://bugs.freebsd.org/bugzilla/show_bug.cgi?id=201751
___
freebsd-current@freebsd.org mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-current
To unsubscribe, send any mail to freebsd-current-unsubscr...@freebsd.org

geom classe's geom_*.so installed /usr/lib/ instead of /lib/geom (crochet build)

[Andrey Fesenko]

Hello,
I'm build CURENT (r284408) for arm with crochet.

all geom lasse's geom_*.so installed /usr/lib/ instead of /lib/geom

/usr/obj/_.installworld.armv6.log
...
=== sbin/geom/class/cache (install)
install -s -o root -g wheel -m 444 geom_cache.so
/usr/obj/_.mount.freebsd/usr/lib
install -o root -g wheel -m 444 gcache.8.gz
/usr/obj/_.mount.freebsd/usr/share/man/man8
/sbin/gcache - /sbin/geom
=== sbin/geom/class/concat (install)
install -s -o root -g wheel -m 444 geom_concat.so
/usr/obj/_.mount.freebsd/usr/lib
install -o root -g wheel -m 444 gconcat.8.gz
/usr/obj/_.mount.freebsd/usr/share/man/man8
...

after boot see
root@r-pi:~ # gpart show
gpart: Unknown command: show.
usage: gpart help
   gpart list [-a] [name ...]
   gpart status [-ags] [name ...]
   gpart load [-v]
   gpart unload [-v]
root@r-pi:~ # cp /usr/lib/geom_* /lib/geom/
root@r-pi:~ # gpart show
= 63  7698369  mmcsd0  MBR  (3.7G)
   6334776   1  !12  [active]  (17M)
34839  1918286   2  freebsd  (937M)
  1953125  5745307  - free -  (2.7G)

=  0  1918286  mmcsd0s2  BSD  (937M)
0  105- free -  (53K)
  105  1918080 1  freebsd-ufs  (937M)
  1918185  101- free -  (51K)
___
freebsd-current@freebsd.org mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-current
To unsubscribe, send any mail to freebsd-current-unsubscr...@freebsd.org

pw after r284118 not execute -V

[Andrey Fesenko]

Hello,
/usr/sbin/pw useradd -n user -s /bin/csh -g wheel -w yes -V
/usr/obj/_.mount.freebsd/etc/ -d /usr/home/user
make not user with /usr/obj/_.mount.freebsd/etc/ but creates it in the
main system /etc
___
freebsd-current@freebsd.org mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-current
To unsubscribe, send any mail to freebsd-current-unsubscr...@freebsd.org

Re: acpi_ibm boot panic

[Andrey Fesenko]

On Mon, Jun 8, 2015 at 9:10 PM, Rui Paulo rpa...@me.com wrote:
 The patch looks fine (goto or no-goto).  I'm curious as to why you have no
 SMBIOS strings though.  Are you EFI-booting?  Did you upgrade EFI so that it
 exports SMBIOS strings to kenv?  I recently fixed this problem in EFI.

I'm testing first version, without ngie@ changes. EFI bootloader + ZFS
root system (boot in ufs)
___
freebsd-current@freebsd.org mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-current
To unsubscribe, send any mail to freebsd-current-unsubscr...@freebsd.org

Re: acpi_ibm boot panic

[Andrey Fesenko]

On Sun, Jun 7, 2015 at 8:05 PM, Allan Jude allanj...@freebsd.org wrote:
 On 2015-06-07 10:58, Allan Jude wrote:
 On 2015-06-07 10:50, Allan Jude wrote:
 On 2015-06-07 08:25, Andrey Fesenko wrote:
 Hello,
 After update r283989 and r284106 system crush if /boot/loader.conf
 contain acpi_ibm_load=YES if comment this line, boot success.
 Screenshot http://bsdnir.info/files/acpi_ibm_crush.png
 ___
 freebsd-current@freebsd.org mailing list
 http://lists.freebsd.org/mailman/listinfo/freebsd-current
 To unsubscribe, send any mail to freebsd-current-unsubscr...@freebsd.org


 I am getting the same thing on my Lenovo T530 as well


 The problem seems to be r283678 by rpaulo@, I am trying to debug it now.


 I have proposed a patch that solves the issue on my system here:

 https://reviews.freebsd.org/D2750


Thanks, this patch work fine for my X220
___
freebsd-current@freebsd.org mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-current
To unsubscribe, send any mail to freebsd-current-unsubscr...@freebsd.org

acpi_ibm boot panic

[Andrey Fesenko]

Hello,
After update r283989 and r284106 system crush if /boot/loader.conf
contain acpi_ibm_load=YES if comment this line, boot success.
Screenshot http://bsdnir.info/files/acpi_ibm_crush.png
___
freebsd-current@freebsd.org mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-current
To unsubscribe, send any mail to freebsd-current-unsubscr...@freebsd.org

[BeagleBone Black] not bootable emmc after D2646?

[Andrey Fesenko]

Hello,

Booting from emmc possible only if you have installed sdcard (u-boot
start from sdcard) if stop boot and set loaderdev='mmc 1' system boot
emmc.
Without this, when sdcard slot empty, in terminal i'm see 
(u-boot not start)

It looks like this is due to https://reviews.freebsd.org/D2646

# uname -a
FreeBSD bb.local 11.0-CURRENT FreeBSD 11.0-CURRENT #0 r283948: Wed Jun
 3 18:45:48 MSK 2015
root@des.local:/usr/obj/arm.armv6/usr/src/sys/BEAGLEBONE-V6  arm

for copy to emmc uses # sh copy-to-emmc.sh

copying succes, fix fstab (remove lables)
# cat /etc/fstab
/dev/mmcsd1s1   /boot/msdos msdosfs rw,noatime   0 0
/dev/mmcsd1s2a  /   ufs rw,noatime   1 1
md/tmpmfs rw,noatime,-s30m 0 0
md/var/logmfs rw,noatime,-s15m 0 0
md/var/tmpmfs rw,noatime,-s5m  0 0

root@bb:~ # fdisk mmcsd1
*** Working on device /dev/mmcsd1 ***
parameters extracted from in-core disklabel are:
cylinders=233 heads=255 sectors/track=63 (16065 blks/cyl)

parameters to be used for BIOS calculations are:
cylinders=233 heads=255 sectors/track=63 (16065 blks/cyl)

Media sector size is 512
Warning: BIOS sector numbering starts with sector 1
Information from DOS bootblock is:
The data for partition 1 is:
sysid 12 (0x0c),(DOS or Windows 95 with 32 bit FAT (LBA))
start 1024, size 4096 (2 Meg), flag 80 (active)
beg: cyl 0/ head 31/ sector 2;
end: cyl 1/ head 27/ sector 5
The data for partition 2 is:
sysid 165 (0xa5),(FreeBSD/NetBSD/386BSD)
start 5120, size 3745792 (1829 Meg), flag 0
beg: cyl 1/ head 27/ sector 6;
end: cyl 887/ head 127/ sector 33
The data for partition 3 is:
UNUSED
The data for partition 4 is:
UNUSED

# fsck_msdosfs /dev/mmcsd1s1
** /dev/mmcsd1s1
** Phase 1 - Read and Compare FATs
** Phase 2 - Check Cluster Chains
** Phase 3 - Checking Directories
** Phase 4 - Checking for Lost Files
10 files, 1180 free (2360 clusters)

# diskinfo -v /dev/mmcsd1
/dev/mmcsd1
512 # sectorsize
1920991232  # mediasize in bytes (1.8G)
3751936 # mediasize in sectors
524288  # stripesize
0   # stripeoffset
98E43448# Disk ident.

# gpart show
= 63  7698369  mmcsd0  MBR  (3.7G)
   63 4095   1  !12  [active]  (2.0M)
 4158  7688130   2  freebsd  (3.7G)
  7692288 6144  - free -  (3.0M)

=  0  7688130  mmcsd0s2  BSD  (3.7G)
0   66- free -  (33K)
   66  7688064 1  freebsd-ufs  (3.7G)
___
freebsd-current@freebsd.org mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-current
To unsubscribe, send any mail to freebsd-current-unsubscr...@freebsd.org

Re: am335x-bone.dts not exist

[Andrey Fesenko]

On Tue, May 26, 2015 at 1:19 AM, Tim Kientzle t...@kientzle.com wrote:

 On May 25, 2015, at 8:25 AM, Warner Losh i...@bsdimp.com wrote:


 On May 24, 2015, at 7:44 PM, Tim Kientzle t...@kientzle.com wrote:


 On May 24, 2015, at 12:55 AM, Oleksandr Tymoshenko go...@bluezbox.com 
 wrote:


 On May 24, 2015, at 12:12 AM, Garrett Cooper yaneurab...@gmail.com 
 wrote:

 On May 24, 2015, at 0:07, Oleksandr Tymoshenko go...@bluezbox.com wrote:

 On May 23, 2015, at 7:21 PM, Andrey Fesenko f0and...@gmail.com wrote:

 # uname -a
 FreeBSD des.local 11.0-CURRENT FreeBSD 11.0-CURRENT #0 r283306: Sat
 May 23 11:56:46 MSK 2015
 root@des.local:/usr/obj/usr/src/sys/GENERIC  amd64

 I'm build BEAGLEBONE with crochet.

 build error

 Mounting UFS partition 1 at /usr/obj/_.mount.freebsd
 Installing U-Boot from : /usr/local/share/u-boot/u-boot-beaglebone
 Error: beaglebone.dts:29.1-2 syntax error
 FATAL ERROR: Unable to parse input tree


 file /usr/src/sys/boot/fdt/dts/arm/beaglebone.dts contain #include
 am335x-bone.dts but this file not existence. Need use am335x-evm.dts
 or else?


 am335x-bone.dts in in sys/gnu/dts/arm/, it's a file provided by vendor 
 (TI)

 I guess crochet does not have this path as include path when compiling
 dts files.

 Pardon me for being a bit daft potentially, but shouldn’t #include work 
 for all dts files (look for #include in this doc: 
 http://events.linuxfoundation.org/sites/events/files/slides/petazzoni-device-tree-dummies.pdf
  )?
 Thanks!



 #include in dts file is handled by cpp(1). /include/ is handled
 by dtc I believe

 You can take a look at how FreeBSD compiles dts files in
 sys/tools/fdt/make_dtb.sh

 crochet does not have cpp stage of compilation and before my TI
 code/devicetree refactoring none of the dts files referenced in
 crochet used #include. That's why problem never appeared.

 Fix is just a matter of fixing freebsd_install_fdt in lib/freebsd.sh.
 If nobody beats me to it I'll try to fix it and submit pull request to Tim.

 I’m testing a fix for this now.

 Thanks for providing such detailed information.

 Is there any reason the standard dts to dtb script isn’t being used instead 
 of enshrining another copy of that outside the tree which may break if/when 
 we need to enhance the current script?

 Until recently, this didn’t seem necessary; it was a lot simpler to just 
 invoke dtc.

 But times change:  https://github.com/freebsd/crochet/commit/22d7555

 Tim


It's working :)

% uname -a
FreeBSD bb.local 11.0-CURRENT FreeBSD 11.0-CURRENT #0 r283544: Tue May
26 01:54:44 MSK 2015
root@des.local:/usr/obj/arm.armv6/usr/src/sys/BEAGLEBONE-V6  arm
___
freebsd-current@freebsd.org mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-current
To unsubscribe, send any mail to freebsd-current-unsubscr...@freebsd.org

am335x-bone.dts not exist

[Andrey Fesenko]

# uname -a
FreeBSD des.local 11.0-CURRENT FreeBSD 11.0-CURRENT #0 r283306: Sat
May 23 11:56:46 MSK 2015
root@des.local:/usr/obj/usr/src/sys/GENERIC  amd64

I'm build BEAGLEBONE with crochet.

build error

Mounting UFS partition 1 at /usr/obj/_.mount.freebsd
Installing U-Boot from : /usr/local/share/u-boot/u-boot-beaglebone
Error: beaglebone.dts:29.1-2 syntax error
FATAL ERROR: Unable to parse input tree


file /usr/src/sys/boot/fdt/dts/arm/beaglebone.dts contain #include
am335x-bone.dts but this file not existence. Need use am335x-evm.dts
or else?
___
freebsd-current@freebsd.org mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-current
To unsubscribe, send any mail to freebsd-current-unsubscr...@freebsd.org

EFI boot loader regression?

[Andrey Fesenko]

Hello,

I'm use system with EFI boot loader on Lenovo X220.

Old EFI loader work fine if BIOS set any boot priority UEFI or Legacy first.

Starting around December last year, system not boot if set UEFI boot first.

http://bsdnir.info/files/efi/ screenshots and working version boot loader

For the cleanliness of experiment, as a new loader I downloaded and
test FreeBSD-11.0-CURRENT-amd64-20150421-r281832-memstick.img
___
freebsd-current@freebsd.org mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-current
To unsubscribe, send any mail to freebsd-current-unsubscr...@freebsd.org

Re: Haswell CPU Feature

[Andrey Fesenko]

On Tue, Jan 6, 2015 at 4:24 AM, Sean Bruno sbr...@ignoranthack.me wrote:
 -BEGIN PGP SIGNED MESSAGE-
 Hash: SHA512

 On 01/05/15 16:57, Neel Natu wrote:
 Congratulations, you have the ability to debug the Haswell silicon

 HA!

 Is this turned on purposefully (its a feature of the CPU) or is this
 turned on unintentionally and is a bug in manufacturing?

 sean

My desktop i5-4570 contain this flag too

Origin=GenuineIntel  Id=0x306c3  Family=0x6  Model=0x3c  Stepping=3
  
Features=0xbfebfbffFPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE
  
Features2=0x7ffafbffSSE3,PCLMULQDQ,DTES64,MON,DS_CPL,VMX,SMX,EST,TM2,SSSE3,b11,FMA,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,x2APIC,MOVBE,POPCNT,TSCDLT,AESNI,XSAVE,OSXSAVE,AVX,F16C,RDRAND
___
freebsd-current@freebsd.org mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-current
To unsubscribe, send any mail to freebsd-current-unsubscr...@freebsd.org

lighttpd crush the system after r274463

[Andrey Fesenko]

Hello,
I'm use lighttpd+SPAWNFCGI for moinmoin wiki.
Before r274463 work fine, after update r275317 and CURRENT system
crushed after start any python CGI script.

For test i'm install py27-flup and start simple

#!/usr/local/bin/python2.7
def myapp(environ, start_response):
start_response('200 OK', [('Content-Type', 'text/plain')])
return ['Hello World!\n']

if __name__ == '__main__':
from flup.server.fcgi import WSGIServer
WSGIServer(myapp).run()

Perl CGI test script work fine.

Workaround FreeBSD-r275317 and later

lighttpd-1.4.35_5
Options:
BZIP2  : on
DOCS   : on
FAM: on
GDBM   : off
IPV6   : on
LDAP   : off
LIBEV  : on
LUA: on
MEMCACHE   : off
MYSQL  : off
MYSQLAUTH  : off
NODELAY: on
OPENSSL: on
SPAWNFCGI  : on
VALGRIND   : off
WEBDAV : off
Shared Libs required:
libpcre.so.1
liblua-5.1.so
libfam.so.0
libev.so.4

Fatal trap 12: page fault while in kernel mode
cpuid = 0; apic id = 00
fault virtual address   = 0x8
fault code  = supervisor read data, page not present
instruction pointer = 0x20:0x809d44bd
stack pointer   = 0x28:0xfe00f77df700
frame pointer   = 0x28:0xfe00f77df730
code segment= base 0x0, limit 0xf, type 0x1b
= DPL 0, pres 1, long 1, def32 0, gran 1
processor eflags= interrupt enabled, resume, IOPL = 0
current process = 658 (lighttpd)
[ thread pid 658 tid 100067 ]
Stopped at  sbappendstream_locked+0x2d: cmpq$0,0x8(%r14)
db bt
Tracing pid 658 tid 100067 td 0xf8000ba3e940
sbappendstream_locked() at sbappendstream_locked+0x2d/frame 0xfe00f77df730
sbappendstream() at sbappendstream+0x3c/frame 0xfe00f77df760
tcp_usr_send() at tcp_usr_send+0x1ab/frame 0xfe00f77df7e0
sosend_generic() at sosend_generic+0x40b/frame 0xfe00f77df8a0
soo_write() at soo_write+0x42/frame 0xfe00f77df8d0
dofilewrite() at dofilewrite+0x88/frame 0xfe00f77df920
kern_writev() at kern_writev+0x68/frame 0xfe00f77df970
sys_writev() at sys_writev+0x36/frame 0xfe00f77df9a0
amd64_syscall() at amd64_syscall+0x25a/frame 0xfe00f77dfab0
Xfast_syscall() at Xfast_syscall+0xfb/frame 0xfe00f77dfab0
--- syscall (121, FreeBSD ELF64, sys_writev), rip = 0x80164cb8a, rsp =
0x7fffa658, rbp = 0x7fffe6
c0 ---
___
freebsd-current@freebsd.org mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-current
To unsubscribe, send any mail to freebsd-current-unsubscr...@freebsd.org

Re: lighttpd crush the system after r274463

[Andrey Fesenko]

On Fri, Dec 19, 2014 at 11:46 PM, Gleb Smirnoff gleb...@freebsd.org wrote:
 On Fri, Dec 19, 2014 at 08:41:54PM +0100, Guido Falsi wrote:
 G On 12/19/14 19:28, Adrian Chadd wrote:
 G  Hm, glebius? Any ideas?

 I was quite busy last week, doing defense of my thesis. Now it is
 done, and I will look at the problem ASAP.

 --
 Totus tuus, Glebius.

I found the problem seems to commit
https://svnweb.freebsd.org/base/head/sys/kern/uipc_socket.c?r1=274712r2=274711pathrev=274712
if revert this, and rebuild kernel, system work fine.
___
freebsd-current@freebsd.org mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-current
To unsubscribe, send any mail to freebsd-current-unsubscr...@freebsd.org

Re: console screen saver broken? -current

[Andrey Fesenko]

On Thu, Dec 11, 2014 at 8:42 PM, Alfred Perlstein alf...@freebsd.org wrote:
 Up until a few months ago the following added to /etc/rc.conf would blank
 the screen:

 # /etc/rc.conf
 saver=green
 allscreens_flags=-t 60

 Now that no longer works.

 Can someone explain how to restore the power saving screen saver please?

 It doesn't seem obvious from the docs or anything else.

 Are the current green_saver.ko and other screen saver modules still able
 to blank the screen?

 Do splash screen work?

 -Alfred


See https://wiki.freebsd.org/Newcons?highlight=%28syscons%29

screensaver No
___
freebsd-current@freebsd.org mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-current
To unsubscribe, send any mail to freebsd-current-unsubscr...@freebsd.org

Re: ZFS bug or feature

[Andrey Fesenko]

On Tue, Apr 22, 2014 at 9:31 PM, Thomas Hoffmann trh...@gmail.com wrote:
 In /boot/loader.conf:
 kern.geom.label.disk_ident.enable=0

 will disable the use of disk ids.

 -Tom

Yes it helped :)
I apologize for a small panic, then looked more closely again, and so
everything was more or less normal
___
freebsd-current@freebsd.org mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-current
To unsubscribe, send any mail to freebsd-current-unsubscr...@freebsd.org

Re: Booting from ZFS root on MBR layout fails on ThinkPad X61s

[Andrey Fesenko]

On Wed, Apr 16, 2014 at 2:01 AM, Sevan / Venture37 ventur...@gmail.com wrote:
 Hi,
 I decided to wipe away the disk in my X61s  start afresh with a new
 install of FreeBSD-Current at the same time switching to root on ZFS
 (previously /boot was on UFS).
 I've been unsuccessful in being able get the system to boot, after
 trying various combinations of
 https://wiki.freebsd.org/RootOnZFS/ZFSBootPartition I switched back to
 using the install menu option  just switching from GPT to MBR
 (everything else as default).
 Once install completes  the system reboots, the system hangs at a prompt.

 I was pointed to a post regarding modifying partition ID's by Allan
 Jude as there seems to have been an issue with ThinkPads  FreeBSD in
 the past. This also didn't work  caused the system to reset.

 What should be my next step for trying to debug this issue?


 Sevan / Venture37


It seems there are some problems with compatibility :(
I'm have X220 my config
# camcontrol devlist
Corsair Neutron SSD M206 at scbus0 target 0 lun 0 (ada0,pass0)
OCZ-NOCTI 2.15   at scbus1 target 0 lun 0 (ada1,pass1)

 % gpart show
=   63  468862065  ada0  MBR  (224G)
 63  234441585 1  freebsd  (112G)
  234441648  234420480 2  freebsd  (112G)

=0  234441585  ada0s1  BSD  (112G)
  0  234441585   1  freebsd-zfs  (112G)

=   63  234441585  ada1  MBR  (112G)
 63  234441585 1  freebsd  [active]  (112G)

=0  234441585  ada1s1  BSD  (112G)
  0  234441585   1  freebsd-zfs  (112G)

system ZFS mirror x220pool (ada0s1a ada1s1a) boot only ada1 (msata) disk.
Boot with GPT not work, black screen and reboot without any menu.

When I used HDD as ada1 boot with him work MBR method
Might be worth trying to boot from UEFI but it's still an experimental
method https://wiki.freebsd.org/UEFI
___
freebsd-current@freebsd.org mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-current
To unsubscribe, send any mail to freebsd-current-unsubscr...@freebsd.org

ZFS bug or feature

[Andrey Fesenko]

After detach ada0 and attach him (reboot between that)

boot only one disk
Apr 17 13:33:52 x220 kernel: ada0 at ahcich2 bus 0 scbus0 target 0 lun 0
Apr 17 13:33:52 x220 kernel: ada0: OCZ-NOCTI 2.15 ATA-8 SATA 2.x device
Apr 17 13:33:52 x220 kernel: ada0: Serial Number OCZ-J8928HU1G10KR9XM
Apr 17 13:33:52 x220 kernel: ada0: 300.000MB/s transfers (SATA 2.x,
UDMA6, PIO 8192bytes)
Apr 17 13:33:52 x220 kernel: ada0: Command Queueing enabled
Apr 17 13:33:52 x220 kernel: ada0: 114473MB (234441648 512 byte
sectors: 1H 63S/T 65535C)
Apr 17 13:33:52 x220 kernel: ada0: Previously was known as ad4

After attach ada0 im see this

# camcontrol devlist
Corsair Neutron SSD M206 at scbus0 target 0 lun 0 (ada0,pass0)
OCZ-NOCTI 2.15   at scbus1 target 0 lun 0 (ada1,pass1)

# zpool status
  pool: x220pool
 state: ONLINE
status: Some supported features are not enabled on the pool. The pool can
still be used, but some features are unavailable.
action: Enable all features using 'zpool upgrade'. Once this is done,
the pool may no longer be accessible by software that does not support
the features. See zpool-features(7) for details.
  scan: resilvered 42.4M in 0h0m with 0 errors on Thu Apr 17 13:48:42 2014
config:

NAME STATE READ WRITE CKSUM
x220pool ONLINE   0 0 0
  mirror-0   ONLINE   0 0 0
diskid/DISK-OCZ-J8928HU1G10KR9XMs1a  ONLINE   0 0 0
ada0s1a  ONLINE   0 0 0

errors: No known data errors

# gpart show
=   63  468862065  ada0  MBR  (224G)
 63  234441585 1  freebsd  (112G)
  234441648  234420480 2  freebsd  (112G)

=0  234441585  ada0s1  BSD  (112G)
  0  234441585   1  freebsd-zfs  (112G)

=   63  234441585  diskid/DISK-OCZ-J8928HU1G10KR9XM  MBR  (112G)
 63  234441585 1  freebsd
[active]  (112G)

=0  234441585  diskid/DISK-OCZ-J8928HU1G10KR9XMs1  BSD  (112G)
  0  234441585   1  freebsd-zfs  (112G)

Apr 17 13:48:43 x220 kernel: ada0 at ahcich0 bus 0 scbus0 target 0 lun 0
Apr 17 13:48:43 x220 kernel: ada0: Corsair Neutron SSD M206 ATA-8
SATA 3.x device
Apr 17 13:48:43 x220 kernel: ada0: Serial Number 124079271802000A
Apr 17 13:48:43 x220 kernel: ada0: 600.000MB/s transfers (SATA 3.x,
UDMA6, PIO 8192bytes)
Apr 17 13:48:43 x220 kernel: ada0: Command Queueing enabled
Apr 17 13:48:43 x220 kernel: ada0: 228936MB (468862128 512 byte
sectors: 16H 63S/T 16383C)
Apr 17 13:48:43 x220 kernel: ada0: Previously was known as ad4
Apr 17 13:48:43 x220 kernel: ada1 at ahcich2 bus 0 scbus1 target 0 lun 0
Apr 17 13:48:43 x220 kernel: ada1: OCZ-NOCTI 2.15 ATA-8 SATA 2.x device
Apr 17 13:48:43 x220 kernel: ada1: Serial Number OCZ-J8928HU1G10KR9XM
Apr 17 13:48:43 x220 kernel: ada1: 300.000MB/s transfers (SATA 2.x,
UDMA6, PIO 8192bytes)
Apr 17 13:48:43 x220 kernel: ada1: Command Queueing enabled
Apr 17 13:48:43 x220 kernel: ada1: 114473MB (234441648 512 byte
sectors: 1H 63S/T 65535C)
Apr 17 13:48:43 x220 kernel: ada1: Previously was known as ad6

# zpool history -il | tail -6
2014-04-17.13:33:51 [txg:8004153] open pool version 5000; software
version 5000/5; uts  11.0-CURRENT 115 amd64 [on x220.local]
2014-04-17.13:48:36 [txg:8004321] open pool version 5000; software
version 5000/5; uts  11.0-CURRENT 115 amd64 [on x220.local]
2014-04-17.13:48:41 [txg:8004324] scan setup func=2 mintxg=8004151
maxtxg=8004320 [on x220.local]
2014-04-17.13:48:42 [txg:8004325] scan done complete=1 [on x220.local]
2014-04-17.13:53:53 zpool clear x220pool [user 0 (root) on x220.local]
___
freebsd-current@freebsd.org mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-current
To unsubscribe, send any mail to freebsd-current-unsubscr...@freebsd.org

Re: ZFS bug or feature

[Andrey Fesenko]

On Tue, Apr 22, 2014 at 8:23 PM, Tom Evans tevans...@googlemail.com wrote:

 I'm confused, what is the bug or feature? Has it added the disk with
 the wrong label? You can correct that with an zpool export x220pool /
 zpool import -d /dev/diskid x220pool


gpart see only one disk ada0 (OCZ), if believe camcontrol ada0
(Corsair) - OCZ (ada1) why zpool status see two disk and not error

x220pool - root file system I'm would not like to break it
___
freebsd-current@freebsd.org mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-current
To unsubscribe, send any mail to freebsd-current-unsubscr...@freebsd.org

Re: SATA2 mode on SATA3 SSD (marvell controller) after boot

[Andrey Fesenko]

On Thu, Apr 17, 2014 at 2:10 PM, Andrey Fesenko f0and...@gmail.com wrote:
 if disconnect ssd
 pr 17 14:07:08 desktop kernel: ahcich3: DISCONNECT requested
 Apr 17 14:07:08 desktop kernel: ahcich3: AHCI reset...
 Apr 17 14:07:08 desktop kernel: ahcich3: SATA connect timeout
 time=1us status=
 Apr 17 14:07:08 desktop kernel: ahcich3: AHCI reset: device not found
 Apr 17 14:07:08 desktop kernel: pass3 at ahcich3 bus 0 scbus3 target 0 lun 0
 Apr 17 14:07:08 desktop kernel: pass3: PLEXTOR PX-128M5S 1.05 s/n
 P0242921 detached
 Apr 17 14:07:08 desktop kernel: ada3 at ahcich3 bus 0 scbus3 target 0 lun 0
 Apr 17 14:07:08 desktop kernel: ada3: PLEXTOR PX-128M5S 1.05 s/n
 P0242921 detached
 Apr 17 14:07:08 desktop kernel: (pass3:ahcich3:0:0:0): Periph destroyed
 Apr 17 14:07:08 desktop kernel: (ada3:ahcich3:0:0:0): Periph destroyed
 Apr 17 14:07:18 desktop kernel: ahcich3: CONNECT requested
 Apr 17 14:07:18 desktop kernel: ahcich3: AHCI reset...
 Apr 17 14:07:18 desktop kernel: ahcich3: SATA connect time=8000us
 status=0133
 Apr 17 14:07:18 desktop kernel: ahcich3: AHCI reset: device found
 Apr 17 14:07:18 desktop kernel: ahcich3: AHCI reset: device ready after 0ms
 Apr 17 14:07:18 desktop kernel: ada3 at ahcich3 bus 0 scbus3 target 0 lun 0
 Apr 17 14:07:18 desktop kernel: GEOM: new disk ada3
 Apr 17 14:07:18 desktop kernel: ada3: PLEXTOR PX-128M5S 1.05 ATA-8
 SATA 3.x device
 Apr 17 14:07:18 desktop kernel: ada3: Serial Number P0242921
 Apr 17 14:07:18 desktop kernel: ada3: 600.000MB/s transfers (SATA 3.x,
 UDMA6, PIO 8192bytes)
 Apr 17 14:07:18 desktop kernel: ada3: Command Queueing enabled
 Apr 17 14:07:18 desktop kernel: ada3: 122104MB (250069680 512 byte
 sectors: 16H 63S/T 16383C)
 Apr 17 14:07:18 desktop kernel: ada3: Previously was known as ad10
 Apr 17 14:07:18 desktop kernel: pass3 at ahcich3 bus 0 scbus3 target 0 lun 0
 Apr 17 14:07:18 desktop kernel: pass3: PLEXTOR PX-128M5S 1.05 ATA-8
 SATA 3.x device
 Apr 17 14:07:18 desktop kernel: pass3: Serial Number P0242921
 Apr 17 14:07:18 desktop kernel: pass3: 600.000MB/s transfers (SATA
 3.x, UDMA6, PIO 8192bytes)
 Apr 17 14:07:18 desktop kernel: pass3: Command Queueing enabled


 # uname -a
 FreeBSD desktop.local 11.0-CURRENT FreeBSD 11.0-CURRENT #0 r263932:
 Sun Mar 30 15:43:01 MSK 2014
 root@desktop.local:/usr/obj/usr/src/sys/MY_DES  amd64

Is it possible camcontrol repeat behavior as physical disable/enable
or enable SATA 3.x mode?
camcontrol negotiate only report not set new mode.

# camcontrol negotiate pass2
Current parameters:
(pass2:ahcich3:0:0:0): SATA revision: 2.x
(pass2:ahcich3:0:0:0): ATA mode: UDMA6
(pass2:ahcich3:0:0:0): ATAPI packet length: 0
(pass2:ahcich3:0:0:0): PIO transaction length: 8192
(pass2:ahcich3:0:0:0): PMP presence: 0
(pass2:ahcich3:0:0:0): Number of tags: 32
(pass2:ahcich3:0:0:0): SATA capabilities: 0030
(pass2:ahcich3:0:0:0): tagged queueing: enabled
___
freebsd-current@freebsd.org mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-current
To unsubscribe, send any mail to freebsd-current-unsubscr...@freebsd.org

Re: SATA2 mode on SATA3 SSD (marvell controller) after boot

[Andrey Fesenko]

On Sun, Apr 20, 2014 at 11:44 PM, Alexander Motin m...@freebsd.org wrote:
 On 20.04.2014 22:31, Andrey Fesenko wrote:

 On Thu, Apr 17, 2014 at 2:10 PM, Andrey Fesenko f0and...@gmail.com
 wrote:

 if disconnect ssd
 pr 17 14:07:08 desktop kernel: ahcich3: DISCONNECT requested
 Apr 17 14:07:08 desktop kernel: ahcich3: AHCI reset...
 Apr 17 14:07:08 desktop kernel: ahcich3: SATA connect timeout
 time=1us status=
 Apr 17 14:07:08 desktop kernel: ahcich3: AHCI reset: device not found
 Apr 17 14:07:08 desktop kernel: pass3 at ahcich3 bus 0 scbus3 target 0
 lun 0
 Apr 17 14:07:08 desktop kernel: pass3: PLEXTOR PX-128M5S 1.05 s/n
 P0242921 detached
 Apr 17 14:07:08 desktop kernel: ada3 at ahcich3 bus 0 scbus3 target 0 lun
 0
 Apr 17 14:07:08 desktop kernel: ada3: PLEXTOR PX-128M5S 1.05 s/n
 P0242921 detached
 Apr 17 14:07:08 desktop kernel: (pass3:ahcich3:0:0:0): Periph destroyed
 Apr 17 14:07:08 desktop kernel: (ada3:ahcich3:0:0:0): Periph destroyed
 Apr 17 14:07:18 desktop kernel: ahcich3: CONNECT requested
 Apr 17 14:07:18 desktop kernel: ahcich3: AHCI reset...
 Apr 17 14:07:18 desktop kernel: ahcich3: SATA connect time=8000us
 status=0133
 Apr 17 14:07:18 desktop kernel: ahcich3: AHCI reset: device found
 Apr 17 14:07:18 desktop kernel: ahcich3: AHCI reset: device ready after
 0ms
 Apr 17 14:07:18 desktop kernel: ada3 at ahcich3 bus 0 scbus3 target 0 lun
 0
 Apr 17 14:07:18 desktop kernel: GEOM: new disk ada3
 Apr 17 14:07:18 desktop kernel: ada3: PLEXTOR PX-128M5S 1.05 ATA-8
 SATA 3.x device
 Apr 17 14:07:18 desktop kernel: ada3: Serial Number P0242921
 Apr 17 14:07:18 desktop kernel: ada3: 600.000MB/s transfers (SATA 3.x,
 UDMA6, PIO 8192bytes)
 Apr 17 14:07:18 desktop kernel: ada3: Command Queueing enabled
 Apr 17 14:07:18 desktop kernel: ada3: 122104MB (250069680 512 byte
 sectors: 16H 63S/T 16383C)
 Apr 17 14:07:18 desktop kernel: ada3: Previously was known as ad10
 Apr 17 14:07:18 desktop kernel: pass3 at ahcich3 bus 0 scbus3 target 0
 lun 0
 Apr 17 14:07:18 desktop kernel: pass3: PLEXTOR PX-128M5S 1.05 ATA-8
 SATA 3.x device
 Apr 17 14:07:18 desktop kernel: pass3: Serial Number P0242921
 Apr 17 14:07:18 desktop kernel: pass3: 600.000MB/s transfers (SATA
 3.x, UDMA6, PIO 8192bytes)
 Apr 17 14:07:18 desktop kernel: pass3: Command Queueing enabled


 # uname -a
 FreeBSD desktop.local 11.0-CURRENT FreeBSD 11.0-CURRENT #0 r263932:
 Sun Mar 30 15:43:01 MSK 2014
 root@desktop.local:/usr/obj/usr/src/sys/MY_DES  amd64


 Is it possible camcontrol repeat behavior as physical disable/enable
 or enable SATA 3.x mode?
 camcontrol negotiate only report not set new mode.

 # camcontrol negotiate pass2
 Current parameters:
 (pass2:ahcich3:0:0:0): SATA revision: 2.x
 (pass2:ahcich3:0:0:0): ATA mode: UDMA6
 (pass2:ahcich3:0:0:0): ATAPI packet length: 0
 (pass2:ahcich3:0:0:0): PIO transaction length: 8192
 (pass2:ahcich3:0:0:0): PMP presence: 0
 (pass2:ahcich3:0:0:0): Number of tags: 32
 (pass2:ahcich3:0:0:0): SATA capabilities: 0030
 (pass2:ahcich3:0:0:0): tagged queueing: enabled


 camcontrol negotiate can limit maximal SATA mode, but not specify it
 exactly. Unless you limited it previously, there should be no limitation set
 and HBA should negotiate it freely. The limitations could be read/set with
 `camcontrol negotiate pass2 -U`, and affect operation after following
 `camcontrol reset ...`.

 --
 Alexander Motin

system this installer usb image without limitation
# uname -a
FreeBSD  11.0-CURRENT FreeBSD 11.0-CURRENT #0 r264634: Fri Apr 18
08:25:11 MSK 2014
andrey@desktop.local:/usr/obj/usr/src/sys/GENERIC  amd64

root@:~ # camcontrol negotiate pass2 -U
User parameters:
(pass2:ahcich3:0:0:0): SATA revision: 0.x
(pass2:ahcich3:0:0:0): ATA mode: NONE
(pass2:ahcich3:0:0:0): ATAPI packet length: 0
(pass2:ahcich3:0:0:0): PIO transaction length: 8192
(pass2:ahcich3:0:0:0): PMP presence: 0
(pass2:ahcich3:0:0:0): Number of tags: 32
(pass2:ahcich3:0:0:0): SATA capabilities: 0030
(pass2:ahcich3:0:0:0): tagged queueing: enabled
root@:~ # camcontrol reset pass2
Reset of bus 0 was successful
root@:~ # camcontrol negotiate pass2
Current parameters:
(pass2:ahcich3:0:0:0): SATA revision: 2.x
(pass2:ahcich3:0:0:0): ATA mode: UDMA6
(pass2:ahcich3:0:0:0): ATAPI packet length: 0
(pass2:ahcich3:0:0:0): PIO transaction length: 8192
(pass2:ahcich3:0:0:0): PMP presence: 0
(pass2:ahcich3:0:0:0): Number of tags: 32
(pass2:ahcich3:0:0:0): SATA capabilities: 0030
(pass2:ahcich3:0:0:0): tagged queueing: enabled
___
freebsd-current@freebsd.org mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-current
To unsubscribe, send any mail to freebsd-current-unsubscr...@freebsd.org

Re: SATA2 mode on SATA3 SSD (marvell controller) after boot

[Andrey Fesenko]

On Mon, Apr 21, 2014 at 12:05 AM, Alexander Motin m...@freebsd.org wrote:

 Then it is a question to hardware or firmware not an OS driver.

 --
 Alexander Motin

Thanks for the tips
try to change to another, it seems some problems with the firmware

In the linux (grml)
Sata-3 hdd have section
Standards:
Supported: 9 8 7 6 5
Likely used: 9


# hdparm -I /dev/sdc

/dev/sdc:

ATA device, with non-removable media
Model Number:   PLEXTOR PX-128M5S
Serial Number:  P0242921
Firmware Revision:  1.05
Transport:  Serial, ATA8-AST, SATA II Extensions, SATA
Rev 2.6, SATA Rev 3.0
Standards:
Used: ATA/ATAPI-7 T13 1532D revision 4a
Supported: 8 7 6 5  some of 8
Configuration:
Logical max current
cylinders   16383   16383
heads   16  16
sectors/track   63  63
--
CHS current addressable sectors:   16514064
LBAuser addressable sectors:  250069680
LBA48  user addressable sectors:  250069680
Logical  Sector size:   512 bytes
Physical Sector size:   512 bytes
Logical Sector-0 offset:  0 bytes
device size with M = 1024*1024:  122104 MBytes
device size with M = 1000*1000:  128035 MBytes (128 GB)
cache/buffer size  = unknown
Nominal Media Rotation Rate: Solid State Device
Capabilities:
LBA, IORDY(can be disabled)
Queue depth: 32
Standby timer values: spec'd by Standard, no device specific minimum
R/W multiple sector transfer: Max = 16  Current = 16
DMA: mdma0 mdma1 mdma2 udma0 udma1 udma2 udma3 udma4 udma5 *udma6
 Cycle time: min=120ns recommended=120ns
PIO: pio0 pio1 pio2 pio3 pio4
 Cycle time: no flow control=120ns  IORDY flow control=120ns
Commands/features:
Enabled Supported:
   *SMART feature set
Security Mode feature set
   *Power Management feature set
   *Write cache
   *Look-ahead
   *Host Protected Area feature set
   *WRITE_BUFFER command
   *READ_BUFFER command
   *DOWNLOAD_MICROCODE
SET_MAX security extension
   *48-bit Address feature set
   *Device Configuration Overlay feature set
   *Mandatory FLUSH_CACHE
   *FLUSH_CACHE_EXT
   *SMART error logging
   *SMART self-test
   *General Purpose Logging feature set
   *64-bit World wide name
   *Segmented DOWNLOAD_MICROCODE
   *Gen1 signaling speed (1.5Gb/s)
   *Gen2 signaling speed (3.0Gb/s)
   *Gen3 signaling speed (6.0Gb/s)
   *Native Command Queueing (NCQ)
   *Host-initiated interface power management
   *Phy event counters
   *DMA Setup Auto-Activate optimization
Device-initiated interface power management
   *Software settings preservation
unknown 78[8]
   *SMART Command Transport (SCT) feature set
   *SCT Write Same (AC2)
   *SCT Error Recovery Control (AC3)
   *SCT Features Control (AC4)
   *SCT Data Tables (AC5)
   *Data Set Management TRIM supported (limit 8 blocks)
Security:
supported
not enabled
not locked
frozen
not expired: security count
supported: enhanced erase
6min for SECURITY ERASE UNIT. 6min for ENHANCED SECURITY ERASE UNIT.
Logical Unit WWN Device Identifier: 500230310017df1b
NAA : 5
IEEE OUI: 002303
Unique ID   : 10017df1b
Checksum: correct

after reconnect SSD this information not change, but syslog

2014-04-21T00:23:21.223409+00:00 grml kernel: [3.482230] ata4:
SATA link up 3.0 Gbps (SStatus 123 SControl 300)
2014-04-21T00:23:21.223410+00:00 grml kernel: [3.482375] Switched
to clocksource tsc
2014-04-21T00:23:21.223410+00:00 grml kernel: [3.484803] ata4.00:
ATA-8: PLEXTOR PX-128M5S, 1.05, max UDMA/133
2014-04-21T00:23:21.223413+00:00 grml kernel: [3.484804] ata4.00:
250069680 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
...
2014-04-21T00:43:52.004962+00:00 grml kernel: [ 1199.327857] ata4:
SError: { DevExch }
2014-04-21T00:43:52.004962+00:00 grml kernel: [ 1199.327860] ata4:
hard resetting link
2014-04-21T00:43:52.728949+00:00 grml kernel: [ 1200.048622] ata4:
SATA link up 6.0 Gbps (SStatus 133 SControl 300)
2014-04-21T00:43:52.728953+00:00 grml kernel: [ 1200.051217] ata4.00:
ATA-8: PLEXTOR PX-128M5S, 1.05, max UDMA/133
2014-04-21T00:43:52.728954+00:00 grml kernel: [ 1200.051219] ata4.00:
250069680 sectors, multi 1: LBA48 NCQ (depth 31/32), AA
___

SATA2 mode on SATA3 SSD (marvell controller) after boot

[Andrey Fesenko]

Hello,

ada2: PLEXTOR PX-128M5S 1.05 ATA-8 SATA 3.x device
ada2: 300.000MB/s transfers (SATA 2.x, UDMA6, PIO 8192bytes)

need tuning? or change SSD?

motherboard gigabyte z87mx-d3h all ports SATA-3, port change does not
change the situation

hdd SATA-3 recognized correctly
ada3: WDC WD30EZRX-00D8PB0 80.00A80 ATA-9 SATA 3.x device
ada3: 600.000MB/s transfers (SATA 3.x, UDMA6, PIO 8192bytes)

another ssd
ada2: Corsair Neutron SSD M206 ATA-8 SATA 3.x device
ada2: 600.000MB/s transfers (SATA 3.x, UDMA6, PIO 8192bytes)

if disconnect ssd
pr 17 14:07:08 desktop kernel: ahcich3: DISCONNECT requested
Apr 17 14:07:08 desktop kernel: ahcich3: AHCI reset...
Apr 17 14:07:08 desktop kernel: ahcich3: SATA connect timeout
time=1us status=
Apr 17 14:07:08 desktop kernel: ahcich3: AHCI reset: device not found
Apr 17 14:07:08 desktop kernel: pass3 at ahcich3 bus 0 scbus3 target 0 lun 0
Apr 17 14:07:08 desktop kernel: pass3: PLEXTOR PX-128M5S 1.05 s/n
P0242921 detached
Apr 17 14:07:08 desktop kernel: ada3 at ahcich3 bus 0 scbus3 target 0 lun 0
Apr 17 14:07:08 desktop kernel: ada3: PLEXTOR PX-128M5S 1.05 s/n
P0242921 detached
Apr 17 14:07:08 desktop kernel: (pass3:ahcich3:0:0:0): Periph destroyed
Apr 17 14:07:08 desktop kernel: (ada3:ahcich3:0:0:0): Periph destroyed
Apr 17 14:07:18 desktop kernel: ahcich3: CONNECT requested
Apr 17 14:07:18 desktop kernel: ahcich3: AHCI reset...
Apr 17 14:07:18 desktop kernel: ahcich3: SATA connect time=8000us
status=0133
Apr 17 14:07:18 desktop kernel: ahcich3: AHCI reset: device found
Apr 17 14:07:18 desktop kernel: ahcich3: AHCI reset: device ready after 0ms
Apr 17 14:07:18 desktop kernel: ada3 at ahcich3 bus 0 scbus3 target 0 lun 0
Apr 17 14:07:18 desktop kernel: GEOM: new disk ada3
Apr 17 14:07:18 desktop kernel: ada3: PLEXTOR PX-128M5S 1.05 ATA-8
SATA 3.x device
Apr 17 14:07:18 desktop kernel: ada3: Serial Number P0242921
Apr 17 14:07:18 desktop kernel: ada3: 600.000MB/s transfers (SATA 3.x,
UDMA6, PIO 8192bytes)
Apr 17 14:07:18 desktop kernel: ada3: Command Queueing enabled
Apr 17 14:07:18 desktop kernel: ada3: 122104MB (250069680 512 byte
sectors: 16H 63S/T 16383C)
Apr 17 14:07:18 desktop kernel: ada3: Previously was known as ad10
Apr 17 14:07:18 desktop kernel: pass3 at ahcich3 bus 0 scbus3 target 0 lun 0
Apr 17 14:07:18 desktop kernel: pass3: PLEXTOR PX-128M5S 1.05 ATA-8
SATA 3.x device
Apr 17 14:07:18 desktop kernel: pass3: Serial Number P0242921
Apr 17 14:07:18 desktop kernel: pass3: 600.000MB/s transfers (SATA
3.x, UDMA6, PIO 8192bytes)
Apr 17 14:07:18 desktop kernel: pass3: Command Queueing enabled


# uname -a
FreeBSD desktop.local 11.0-CURRENT FreeBSD 11.0-CURRENT #0 r263932:
Sun Mar 30 15:43:01 MSK 2014
root@desktop.local:/usr/obj/usr/src/sys/MY_DES  amd64
___
freebsd-current@freebsd.org mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-current
To unsubscribe, send any mail to freebsd-current-unsubscr...@freebsd.org

Re: [xhci] USB 3.0 not working, bug or feature usb/179342?

[Andrey Fesenko]

On Sat, Mar 29, 2014 at 4:37 AM, Andrey Fesenko f0and...@gmail.com wrote:
 and USB3 flash drive
 ugen2.4: Kingston DataTraveler 3.0 PMAP at usbus2, cfg=0 md=HOST
 spd=HIGH (480Mbps) pwr=ON (498mA)
 full list http://pastie.org/8963116

I apologize for panic after additional searches proper BIOS
configuration able to identify flash drive as USB3

ugen0.2: DataTraveler 3.0 Kingston at usbus0, cfg=0 md=HOST
spd=SUPER (5.0Gbps) pwr=ON (224mA)

while writing speed test file with ramdisk is almost unchanged :(

# dd if=/dev/random of=/mnt/ramdisck/test.file bs=10m count=198
2076180480 bytes transferred in 28.443097 secs (72994178 bytes/sec)
# dd if=/mnt/ramdisck/test.file of=/mnt/usb3/test.file bs=10m
count=198
2076180480 bytes transferred in 222.810014 secs (9318165 bytes/sec)
# dd if=/mnt/ramdisck/test.file of=/mnt/usb2/test.file bs=10m
count=198
2076180480 bytes transferred in 248.585099 secs (8351991 bytes/sec)
___
freebsd-current@freebsd.org mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-current
To unsubscribe, send any mail to freebsd-current-unsubscr...@freebsd.org

Re: [xhci] USB 3.0 not working, bug or feature usb/179342?

[Andrey Fesenko]

On Sat, Mar 29, 2014 at 9:46 PM, Adrian Chadd adr...@freebsd.org wrote:
 Try read tests?

 Adrian

 On Mar 29, 2014 10:20 AM, Andrey Fesenko f0and...@gmail.com wrote:

 On Sat, Mar 29, 2014 at 4:37 AM, Andrey Fesenko f0and...@gmail.com
 wrote:
  and USB3 flash drive
  ugen2.4: Kingston DataTraveler 3.0 PMAP at usbus2, cfg=0 md=HOST
  spd=HIGH (480Mbps) pwr=ON (498mA)
  full list http://pastie.org/8963116

 I apologize for panic after additional searches proper BIOS
 configuration able to identify flash drive as USB3

 ugen0.2: DataTraveler 3.0 Kingston at usbus0, cfg=0 md=HOST
 spd=SUPER (5.0Gbps) pwr=ON (224mA)

 while writing speed test file with ramdisk is almost unchanged :(

 # dd if=/dev/random of=/mnt/ramdisck/test.file bs=10m count=198
 2076180480 bytes transferred in 28.443097 secs (72994178 bytes/sec)
 # dd if=/mnt/ramdisck/test.file of=/mnt/usb3/test.file bs=10m
 count=198
 2076180480 bytes transferred in 222.810014 secs (9318165 bytes/sec)
 # dd if=/mnt/ramdisck/test.file of=/mnt/usb2/test.file bs=10m
 count=198
 2076180480 bytes transferred in 248.585099 secs (8351991 bytes/sec)


# dd if=/mnt/usb2/test.file of=/mnt/ramdisck/test.file bs=10m count=198
2076180480 bytes transferred in 1.354000 secs (1533368050 bytes/sec)

# dd if=/mnt/usb3/test.file of=/mnt/ramdisck/test.file bs=10m
count=198
2076180480 bytes transferred in 1.498134 secs (1385844184 bytes/sec)

probably need to try something different as tested.
flash spec http://www.kingston.com/datasheets/dt100g3_us.pdf only
10MB/ sec.* write :)

Strangely, the flash drive is not always defined, after mount USB2
mode it took two times reboot :(

on the notebook USB2-only USB (UFS) - SSD (ZFS)
# dd if=/mnt/usb3/test.file of=/tank/test.file bs=10m count=198
2076180480 bytes transferred in 57.370256 secs (36189144 bytes/sec)
# dd if=/tank/test.file of=/mnt/usb3/test.file bs=10m count=198
2076180480 bytes transferred in 245.685052 secs (8450577 bytes/sec)
___
freebsd-current@freebsd.org mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-current
To unsubscribe, send any mail to freebsd-current-unsubscr...@freebsd.org

[xhci] USB 3.0 not working, bug or feature usb/179342?

[Andrey Fesenko]

# uname -a
FreeBSD desktop.local 11.0-CURRENT FreeBSD 11.0-CURRENT #0 r263711:
Tue Mar 25 15:49:11 MSK 2014
root@desktop.local:/usr/obj/usr/src/sys/MY_DES  amd64

usbconfig list | grep 5.0Gbps
ugen0.1: XHCI root HUB 0x8086 at usbus0, cfg=0 md=HOST spd=SUPER
(5.0Gbps) pwr=SAVE (0mA)

and USB3 flash drive
ugen2.4: Kingston DataTraveler 3.0 PMAP at usbus2, cfg=0 md=HOST
spd=HIGH (480Mbps) pwr=ON (498mA)
full list http://pastie.org/8963116

dmesg debug mode
xhci0: Intel Lynx Point USB 3.0 controller mem 0xf042-0xf042 irq 16 at
device 20.0 on pci0
xhci0: attempting to allocate 1 MSI vectors (8 supported)
msi: routing MSI IRQ 265 to local APIC 0 vector 60
xhci0: using IRQ 265 for MSI
xhci0: MSI enabled
xhci0: 32 byte context size.
xhci0: Port routing mask set to 0x
usbus0 on xhci0
xhci0: usbpf: Attached
...
uhub0: 21 ports with 21 removable, self powered
Root mount waiting for: usbus0
xhci0: Port routing mask set to 0x
usb_alloc_device: device init 2 failed (USB_ERR_IOERROR, ignored)
ugen0.2: Unknown at usbus0 (disconnected)
uhub_reattach_port: could not allocate new device
___
freebsd-current@freebsd.org mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-current
To unsubscribe, send any mail to freebsd-current-unsubscr...@freebsd.org

Re: newcons comming

[Andrey Fesenko]

On Fri, Oct 25, 2013 at 4:18 PM, Aleksandr Rybalko r...@ddteam.net wrote:
 Hello fellow hackers!

 I finally reach the point when I can work with newcons instead of
 syscons on my laptop. Yes, I know it still buggy and have a lot of
 ...

Yes, it's build and work

# uname -a
FreeBSD x220.local 11.0-CURRENT FreeBSD 11.0-CURRENT #1 r257111M: Fri
Oct 25 19:27:50 MSK 2013
andrey@x220.local:/usr/obj/usr/src/sys/W_BOOK  amd64

:)

In the single user ugly
Can not read termcap database:
Using dumb terminal settings

In the multy user mode:

Switch Xorg to consol and back is correct.

spam log
% tail /var/log/messages
Oct 25 20:47:29 x220 kernel: [drm:pid1444:drm_ioctl] pid=1444,
cmd=0xc0086457, nr=0x57, dev 0xf80006682800, auth=1
Oct 25 20:47:29 x220 kernel: [drm:pid1444:drm_ioctl] pid=1444,
cmd=0x20006458, nr=0x58, dev 0xf80006682800, auth=1
Oct 25 20:47:29 x220 last message repeated 5 times
Oct 25 20:47:29 x220 kernel: [drm:pid1444:drm_ioctl] pid=1444,
cmd=0x800c645f, nr=0x5f, dev 0xf80006682800, auth=1
Oct 25 20:47:29 x220 kernel: [drm:pid1444:drm_ioctl] pid=1444,
cmd=0x8020645d, nr=0x5d, dev 0xf80006682800, auth=1
Oct 25 20:47:29 x220 kernel: [drm:pid1444:drm_ioctl] pid=1444,
cmd=0x80406469, nr=0x69, dev 0xf80006682800, auth=1
Oct 25 20:47:29 x220 kernel: [drm:pid1444:i915_gem_execbuffer2]
buffers_ptr 80340a400 buffer_count 2 len 0058
Oct 25 20:47:29 x220 kernel: [drm:pid1444:drm_ioctl] pid=1444,
cmd=0x800c645f, nr=0x5f, dev 0xf80006682800, auth=1
Oct 25 20:47:29 x220 kernel: [drm:pid1444:drm_ioctl] pid=1444,
cmd=0xc0086457, nr=0x57, dev 0xf80006682800, auth=1
Oct 25 20:47:29 x220 kernel: [drm:pid1444:drm_ioctl] pid=1444,
cmd=0x20006458, nr=0x58, dev 0xf80006682800, auth=1

In the console login jumps up, but it works correctly. If ScrlLk console blink.
___
freebsd-current@freebsd.org mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-current
To unsubscribe, send any mail to freebsd-current-unsubscr...@freebsd.org

RaspberryPi crash/freez random time after ~r253751

[Andrey Fesenko]

Hello,

System work stable after migration EABI ~r20130716 (+fix build perl port)
after make new images r253751 and r253847 system (RPi) freez after
random time building ports.

got to collect a backtrace log http://pastebin.com/Bbn9ka4N

 uname -a
FreeBSD raspberry-pi 10.0-CURRENT FreeBSD 10.0-CURRENT #0 r253847M:
Thu Aug  1 03:54:07 MSK 2013
andrey@my_book.local:/home/andrey/obj/arm.armv6/usr/src/sys/RPI-B-IPv6
 arm
___
freebsd-current@freebsd.org mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-current
To unsubscribe, send any mail to freebsd-current-unsubscr...@freebsd.org

Re: RaspberryPi crash/freez random time after ~r253751

[Andrey Fesenko]

On Fri, Aug 2, 2013 at 5:09 PM, Andrey Fesenko f0and...@gmail.com wrote:
 Hello,

 System work stable after migration EABI ~r20130716 (+fix build perl port)
 after make new images r253751 and r253847 system (RPi) freez after
 random time building ports.

 got to collect a backtrace log http://pastebin.com/Bbn9ka4N

 uname -a
 FreeBSD raspberry-pi 10.0-CURRENT FreeBSD 10.0-CURRENT #0 r253847M:
 Thu Aug  1 03:54:07 MSK 2013
 andrey@my_book.local:/home/andrey/obj/arm.armv6/usr/src/sys/RPI-B-IPv6
  arm

after patch http://people.freebsd.org/~andrew/trapframe_align.diff
system boot, random time building ports crash system
bt log http://pastebin.com/jBJFf8Zt
___
freebsd-current@freebsd.org mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-current
To unsubscribe, send any mail to freebsd-current-unsubscr...@freebsd.org

Not work ATH (AR9285) after update

[Andrey Fesenko]

Hello,
i'm horrible news, after update my notebook not nave wi-fi :(
full update system, build and install world and kernel.

# uname -a
FreeBSD x220.local 10.0-CURRENT FreeBSD 10.0-CURRENT #0 r253562: Tue
Jul 23 14:44:07 MSK 2013
root@x220.local:/usr/obj/usr/src/sys/W_BOOK  amd64

# grep ATH /usr/src/sys/amd64/conf/W_BOOK
options ATH_ENABLE_11N
options ATH_DEBUG
options ATH_DIAGAPI

ath0@pci0:3:0:0:class=0x028000 card=0x1a891a3b chip=0x002b168c
rev=0x01 hdr=0x00
vendor = 'Atheros Communications Inc.'
device = 'AR9285 Wireless Network Adapter (PCI-Express)'
class  = network

# ifconfig
ath0: flags=8843UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST metric 0 mtu 2290
ether 00:25:d3:7b:94:87
nd6 options=21PERFORMNUD,AUTO_LINKLOCAL
media: IEEE 802.11 Wireless Ethernet autoselect mode 11g
status: associated
wlan0: flags=8c43UP,BROADCAST,RUNNING,OACTIVE,SIMPLEX,MULTICAST
metric 0 mtu 1500
ether 00:25:d3:7b:94:87
inet6 fe80::225:d3ff:fe7b:9487%wlan0 prefixlen 64 scopeid 0x4
nd6 options=23PERFORMNUD,ACCEPT_RTADV,AUTO_LINKLOCAL
media: IEEE 802.11 Wireless Ethernet autoselect (autoselect)
status: no carrier
ssid  channel 8 (2447 MHz 11g)
regdomain 33411 country RU indoor ecm authmode WPA1+WPA2/802.11i
privacy MIXED deftxkey UNDEF txpower 20 bmiss 7 scanvalid 60
protmode CTS wme burst roaming MANUAL
# ifconfig wlan0 list scan
SSID/MESH IDBSSID  CHAN RATE   S:N INT CAPS
APT-SPB2b8:a3:86:4a:75:6a6   54M -92:-96  100 EP   HTCAP
WPA RSN WME WPS
THD1   74:ea:3a:d1:37:46   10   54M -85:-96  100 EP   RSN HTCAP WME
Balt1   00:90:4c:c1:00:001   54M -90:-96  100 EP   RSN
TP-LINK_904D2A  64:70:02:90:4d:2a   11   54M -94:-96  100 EPS  RSN
HTCAP WME ATH WPS

/var/log/messages
...
Jul 23 15:34:24 x220 wpa_supplicant[669]: wlan0: CTRL-EVENT-TERMINATING
Jul 23 15:34:24 x220 kernel: wlan0: Ethernet address: 00:25:d3:7b:94:87
Jul 23 15:34:24 x220 devd: Executing '/etc/pccard_ether wlan0 start'
Jul 23 15:34:24 x220 wpa_supplicant[2563]: Successfully initialized
wpa_supplicant
Jul 23 15:34:24 x220 wpa_supplicant[2571]: Successfully initialized
wpa_supplicant
Jul 23 15:34:24 x220 wpa_supplicant[2571]: ctrl_iface exists and seems
to be in use - cannot override it
Jul 23 15:34:24 x220 wpa_supplicant[2571]: Delete
'/var/run/wpa_supplicant/wlan0' manually if it is not used anymore
Jul 23 15:34:24 x220 wpa_supplicant[2571]: Failed to initialize
control interface '/var/run/wpa_supplicant'. You may have another
wpa_supplicant process already running or the file was left by an
unclean termination of wpa_supplicant in which case you will need to
manually remove this file before starting wpa_supplicant again.
Jul 23 15:34:24 x220 wpa_supplicant[2571]: ioctl[SIOCS80211, op=26,
val=0, arg_len=0]: Operation not supported
Jul 23 15:34:24 x220 wpa_supplicant[2571]: ioctl[SIOCS80211, op=26,
val=0, arg_len=0]: Operation not supported
Jul 23 15:34:24 x220 root: /etc/rc.d/wpa_supplicant: WARNING: failed
to start wpa_supplicant
Jul 23 15:34:24 x220 wpa_supplicant[2572]: ioctl[SIOCS80211, op=103,
val=0, arg_len=128]: Operation now in progress
Jul 23 15:34:24 x220 wpa_supplicant[2572]: wlan0: Failed to initiate AP scan
Jul 23 15:34:25 x220 wpa_supplicant[2572]: ioctl[SIOCS80211, op=103,
val=0, arg_len=128]: Operation now in progress
Jul 23 15:34:25 x220 wpa_supplicant[2572]: wlan0: Failed to initiate AP scan
Jul 23 15:34:26 x220 wpa_supplicant[2572]: ioctl[SIOCS80211, op=103,
val=0, arg_len=128]: Operation now in progress
Jul 23 15:34:26 x220 kernel: ath0: ath_reset_grablock: didn't finish
after 10 iterations
Jul 23 15:34:26 x220 kernel: ath0: ath_reset_grablock: warning,
recursive reset path!
Jul 23 15:34:26 x220 kernel: ath0: ath_reset: concurrent reset! Danger!
Jul 23 15:34:26 x220 kernel: ath0: ath_raw_xmit: sc_inreset_cnt  0; bailing
Jul 23 15:34:26 x220 kernel: ath0: ath_raw_xmit: sc_inreset_cnt  0; bailing
Jul 23 15:34:26 x220 wpa_supplicant[2572]: wlan0: Failed to initiate AP scan
Jul 23 15:34:27 x220 wpa_supplicant[2572]: ioctl[SIOCS80211, op=103,
val=0, arg_len=128]: Operation now in progress
Jul 23 15:34:27 x220 wpa_supplicant[2572]: wlan0: Failed to initiate AP scan
Jul 23 15:34:29 x220 wpa_supplicant[2572]: ioctl[SIOCS80211, op=103,
val=0, arg_len=128]: Operation now in progress
Jul 23 15:34:29 x220 kernel: ath0: ath_reset_grablock: didn't finish
after 10 iterations
Jul 23 15:34:29 x220 kernel: ath0: ath_reset_grablock: warning,
recursive reset path!
___
freebsd-current@freebsd.org mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-current
To unsubscribe, send any mail to freebsd-current-unsubscr...@freebsd.org

Re: Not work ATH (AR9285) after update

[Andrey Fesenko]

On Tue, Jul 23, 2013 at 5:13 PM, Adrian Chadd adr...@freebsd.org wrote:
 .. are two copies of wpa_supplicant running?



 -adrian

 On 23 July 2013 06:09, Andrey Fesenko f0and...@gmail.com wrote:
 Hello,
 i'm horrible news, after update my notebook not nave wi-fi :(
 full update system, build and install world and kernel.

 # uname -a
 FreeBSD x220.local 10.0-CURRENT FreeBSD 10.0-CURRENT #0 r253562: Tue
 Jul 23 14:44:07 MSK 2013
 root@x220.local:/usr/obj/usr/src/sys/W_BOOK  amd64

 # grep ATH /usr/src/sys/amd64/conf/W_BOOK
 options ATH_ENABLE_11N
 options ATH_DEBUG
 options ATH_DIAGAPI

 ath0@pci0:3:0:0:class=0x028000 card=0x1a891a3b chip=0x002b168c
 rev=0x01 hdr=0x00
 vendor = 'Atheros Communications Inc.'
 device = 'AR9285 Wireless Network Adapter (PCI-Express)'
 class  = network

 # ifconfig
 ath0: flags=8843UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST metric 0 mtu 2290
 ether 00:25:d3:7b:94:87
 nd6 options=21PERFORMNUD,AUTO_LINKLOCAL
 media: IEEE 802.11 Wireless Ethernet autoselect mode 11g
 status: associated
 wlan0: flags=8c43UP,BROADCAST,RUNNING,OACTIVE,SIMPLEX,MULTICAST
 metric 0 mtu 1500
 ether 00:25:d3:7b:94:87
 inet6 fe80::225:d3ff:fe7b:9487%wlan0 prefixlen 64 scopeid 0x4
 nd6 options=23PERFORMNUD,ACCEPT_RTADV,AUTO_LINKLOCAL
 media: IEEE 802.11 Wireless Ethernet autoselect (autoselect)
 status: no carrier
 ssid  channel 8 (2447 MHz 11g)
 regdomain 33411 country RU indoor ecm authmode WPA1+WPA2/802.11i
 privacy MIXED deftxkey UNDEF txpower 20 bmiss 7 scanvalid 60
 protmode CTS wme burst roaming MANUAL
 # ifconfig wlan0 list scan
 SSID/MESH IDBSSID  CHAN RATE   S:N INT CAPS
 APT-SPB2b8:a3:86:4a:75:6a6   54M -92:-96  100 EP   HTCAP
 WPA RSN WME WPS
 THD1   74:ea:3a:d1:37:46   10   54M -85:-96  100 EP   RSN HTCAP WME
 Balt1   00:90:4c:c1:00:001   54M -90:-96  100 EP   RSN
 TP-LINK_904D2A  64:70:02:90:4d:2a   11   54M -94:-96  100 EPS  RSN
 HTCAP WME ATH WPS

 /var/log/messages
 ...
 Jul 23 15:34:24 x220 wpa_supplicant[669]: wlan0: CTRL-EVENT-TERMINATING
 Jul 23 15:34:24 x220 kernel: wlan0: Ethernet address: 00:25:d3:7b:94:87
 Jul 23 15:34:24 x220 devd: Executing '/etc/pccard_ether wlan0 start'
 Jul 23 15:34:24 x220 wpa_supplicant[2563]: Successfully initialized
 wpa_supplicant
 Jul 23 15:34:24 x220 wpa_supplicant[2571]: Successfully initialized
 wpa_supplicant
 Jul 23 15:34:24 x220 wpa_supplicant[2571]: ctrl_iface exists and seems
 to be in use - cannot override it
 Jul 23 15:34:24 x220 wpa_supplicant[2571]: Delete
 '/var/run/wpa_supplicant/wlan0' manually if it is not used anymore
 Jul 23 15:34:24 x220 wpa_supplicant[2571]: Failed to initialize
 control interface '/var/run/wpa_supplicant'. You may have another
 wpa_supplicant process already running or the file was left by an
 unclean termination of wpa_supplicant in which case you will need to
 manually remove this file before starting wpa_supplicant again.
 Jul 23 15:34:24 x220 wpa_supplicant[2571]: ioctl[SIOCS80211, op=26,
 val=0, arg_len=0]: Operation not supported
 Jul 23 15:34:24 x220 wpa_supplicant[2571]: ioctl[SIOCS80211, op=26,
 val=0, arg_len=0]: Operation not supported
 Jul 23 15:34:24 x220 root: /etc/rc.d/wpa_supplicant: WARNING: failed
 to start wpa_supplicant
 Jul 23 15:34:24 x220 wpa_supplicant[2572]: ioctl[SIOCS80211, op=103,
 val=0, arg_len=128]: Operation now in progress
 Jul 23 15:34:24 x220 wpa_supplicant[2572]: wlan0: Failed to initiate AP scan
 Jul 23 15:34:25 x220 wpa_supplicant[2572]: ioctl[SIOCS80211, op=103,
 val=0, arg_len=128]: Operation now in progress
 Jul 23 15:34:25 x220 wpa_supplicant[2572]: wlan0: Failed to initiate AP scan
 Jul 23 15:34:26 x220 wpa_supplicant[2572]: ioctl[SIOCS80211, op=103,
 val=0, arg_len=128]: Operation now in progress
 Jul 23 15:34:26 x220 kernel: ath0: ath_reset_grablock: didn't finish
 after 10 iterations
 Jul 23 15:34:26 x220 kernel: ath0: ath_reset_grablock: warning,
 recursive reset path!
 Jul 23 15:34:26 x220 kernel: ath0: ath_reset: concurrent reset! Danger!
 Jul 23 15:34:26 x220 kernel: ath0: ath_raw_xmit: sc_inreset_cnt  0; bailing
 Jul 23 15:34:26 x220 kernel: ath0: ath_raw_xmit: sc_inreset_cnt  0; bailing
 Jul 23 15:34:26 x220 wpa_supplicant[2572]: wlan0: Failed to initiate AP scan
 Jul 23 15:34:27 x220 wpa_supplicant[2572]: ioctl[SIOCS80211, op=103,
 val=0, arg_len=128]: Operation now in progress
 Jul 23 15:34:27 x220 wpa_supplicant[2572]: wlan0: Failed to initiate AP scan
 Jul 23 15:34:29 x220 wpa_supplicant[2572]: ioctl[SIOCS80211, op=103,
 val=0, arg_len=128]: Operation now in progress
 Jul 23 15:34:29 x220 kernel: ath0: ath_reset_grablock: didn't finish
 after 10 iterations
 Jul 23 15:34:29 x220 kernel: ath0: ath_reset_grablock: warning,
 recursive reset path!

Not,
root@x220:~ # ps -A | grep wpa
 671  -  Ss   0:00.73 /usr/sbin/wpa_supplicant -s -B -i wlan0 -c /etc/wpa_suppl

Start

Re: Not work ATH (AR9285) after update [SOLVED]

[Andrey Fesenko]

On Tue, Jul 23, 2013 at 6:21 PM, Adrian Chadd adr...@freebsd.org wrote:
 Ok, so.

 On 23 July 2013 07:12, Andrey Fesenko f0and...@gmail.com wrote:

 i'm horrible news, after update my notebook not nave wi-fi :(
 full update system, build and install world and kernel.

 What did it used to run?



# grep wlan0 /etc/rc.conf
wlans_ath0=wlan0
ifconfig_wlan0=WPA DHCP
ifconfig_wlan0_ipv6=inet6 accept_rtadv

 Jul 23 15:34:27 x220 wpa_supplicant[2572]: wlan0: Failed to initiate AP 
 scan
 Jul 23 15:34:29 x220 wpa_supplicant[2572]: ioctl[SIOCS80211, op=103,
 val=0, arg_len=128]: Operation now in progress
 Jul 23 15:34:29 x220 kernel: ath0: ath_reset_grablock: didn't finish
 after 10 iterations
 Jul 23 15:34:29 x220 kernel: ath0: ath_reset_grablock: warning,
 recursive reset path!

 Your previous log indicated multiple copies of wpa_supplicant. That
 should be investigated.

 Not,
 root@x220:~ # ps -A | grep wpa
  671  -  Ss   0:00.73 /usr/sbin/wpa_supplicant -s -B -i wlan0 -c 
 /etc/wpa_suppl

 Start, or restart work standart
 # /etc/rc.d/netif restart
 this scheme work fine ~year or half year.
 Although of course the chip AR9285 is not very stable, especially in
 combination with some AP.

 That's why I updated the support. It's much more stable now. Except if
 you somehow get 1 wpa_supplicant instances running.


 Hm... intresting boot messages
 ...
 Jul 23 17:47:06 x220 kernel: ath0: Atheros 9285 mem
 0xf240-0xf240 irq 17 at device 0.0 on pci3
 Jul 23 17:47:06 x220 kernel: [ath] AR9285 Main LNA config: LNA1
 Jul 23 17:47:06 x220 kernel: [ath] AR9285 Alt LNA config: LNA2
 Jul 23 17:47:06 x220 kernel: [ath] LNA diversity disabled, Diversity disabled
 Jul 23 17:47:06 x220 kernel: ath0: [HT] enabling HT modes
 Jul 23 17:47:06 x220 kernel: ath0: [HT] 1 stream STBC receive enabled
 Jul 23 17:47:06 x220 kernel: ath0: [HT] 1 RX streams; 1 TX streams
 Jul 23 17:47:06 x220 kernel: ath0: AR9285 mac 192.2 RF5133 phy 14.0
 Jul 23 17:47:06 x220 kernel: ath0: 2GHz radio: 0x; 5GHz radio: 0x00c0

 x220 - is this a thinkpad? Or what kind of laptop is it?

 Have you added this card in yourself? Are both antennas connected?

 The EEPROM settings disable diversity. Thus, the transmit path is
 always LNA1, the receive path is always LNA1. So, it should at least
 have that antenna connected.


Yes it's thinkpad X220 :) :(
hacked BIOS for remove wite list, yes antenna connected
card installed near yea ago and all this time working for startup on the rc.conf

 old log
 Jul  2 13:30:02 x220 kernel: ath0: Atheros 9285 mem
 0xf240-0xf240 irq 17 at device 0.0 on pci3
 Jul  2 13:30:02 x220 kernel: ath0: [HT] enabling HT modes
 Jul  2 13:30:02 x220 kernel: ath0: [HT] 1 stream STBC receive enabled
 Jul  2 13:30:02 x220 kernel: ath0: [HT] 1 RX streams; 1 TX streams
 Jul  2 13:30:02 x220 kernel: ath0: AR9285 mac 192.2 RF5133 phy 14.0
 Jul  2 13:30:02 x220 kernel: ath0: 2GHz radio: 0x; 5GHz radio: 0x00c0

 What's the svn revision on that?


FreeBSD 10.0-CURRENT #0 r249991

 and old style reconnect
 Jul  2 14:15:33 x220 wpa_supplicant[516]: CTRL-EVENT-DISCONNECTED
 bssid=58:6d:8f:fa:d9:50 reason=0
 Jul  2 14:15:33 x220 kernel: wlan0: link state changed to DOWN
 Jul  2 14:15:35 x220 wpa_supplicant[516]: Trying to associate with
 58:6d:8f:fa:d9:50 (SSID='hometest' freq=2472 MHz)
 Jul  2 14:15:35 x220 wpa_supplicant[516]: Associated with 58:6d:8f:fa:d9:50
 Jul  2 14:15:35 x220 kernel: wlan0: link state changed to UP
 Jul  2 14:15:35 x220 kernel: ath0: ath_rate_tx_complete: ts_rate=27
 ts_finaltsi=0
 Jul  2 14:15:35 x220 kernel: ath0: bad series0 hwrate 0x1b, tries 1
 ts_status 0x0
 Jul  2 14:15:35 x220 kernel: ath0: ath_rate_tx_complete: ts_rate=27
 ts_finaltsi=0
 Jul  2 14:15:35 x220 kernel: ath0: bad series0 hwrate 0x1b, tries 1
 ts_status 0x0
 Jul  2 14:15:35 x220 wpa_supplicant[516]: WPA: Key negotiation
 completed with 58:6d:8f:fa:d9:50 [PTK=CCMP GTK=CCMP]
 Jul  2 14:15:35 x220 wpa_supplicant[516]: CTRL-EVENT-CONNECTED -
 Connection to 58:6d:8f:fa:d9:50 completed (reauth) [id=0 id_str=]
 Jul  2 14:15:35 x220 dhclient: New IP Address (wlan0): 192.168.1.22
 Jul  2 14:15:35 x220 dhclient: New Subnet Mask (wlan0): 255.255.255.0
 Jul  2 14:15:35 x220 dhclient: New Broadcast Address (wlan0): 192.168.1.255
 Jul  2 14:15:35 x220 dhclient: New Routers (wlan0): 192.168.1.1
 Jul  2 14:19:57 x220 kernel: ath0: ath_rate_tx_complete: ts_rate=27
 ts_finaltsi=0
 Jul  2 14:19:57 x220 kernel: ath0: bad series0 hwrate 0x1b, tries 1
 ts_status 0x0
 Jul  2 14:20:00 x220 kernel: ath0: ath_rate_tx_complete: ts_rate=27
 ts_finaltsi=0
 Jul  2 14:20:00 x220 kernel: ath0: bad series0 hwrate 0x1b, tries 1
 ts_status 0x0
 Jul  2 14:22:21 x220 kernel: ath0: ath_rate_tx_complete: ts_rate=27
 ts_finaltsi=0
 Jul  2 14:22:21 x220 kernel: ath0: bad series0 hwrate 0x1b, tries 1
 ts_status 0x0
 Jul  2 15:10:13 x220 wpa_supplicant[516]: WPA: Group rekeying
 completed with 58:6d:8f:fa:d9:50 [GTK=CCMP]
 Jul  2 15:10:13 x220 kernel: ath0: ath_rate_tx_complete

RaspberryPi (ARMv6) after update EABI not build perl

[Andrey Fesenko]

Hi, anyone succeeded build perl for eabi? my rpi make results in an
error equally for all perl version

#define PERL_FPU_INIT (void)fpsetmask(0)
^
1 warning generated.
LD_LIBRARY_PATH=/usr/ports/lang/perl5.14/work/perl-5.14.4 cc -pthread
-Wl,-E  -fstack-protector -L/usr/local/lib -o miniperlgv.o toke.o
perly.o pad.o regcomp.o dump.o util.o mg.o reentr.o mro.o keywords.o
hv.o av.o run.o pp_hot.o sv.o pp.o scope.o pp_ctl.o pp_sys.o doop.o
doio.o regexec.o utf8.o taint.o deb.o universal.o globals.o perlio.o
perlapi.o numeric.o mathoms.o locale.o pp_pack.o pp_sort.o
miniperlmain.o opmini.o perlmini.o -lm -lcrypt -lutil
LD_LIBRARY_PATH=/usr/ports/lang/perl5.14/work/perl-5.14.4  ./miniperl
-w -Ilib -MExporter -e '?' || /usr/bin/make minitest
longjmp botch.
Abort trap (core dumped)
LD_LIBRARY_PATH=/usr/ports/lang/perl5.14/work/perl-5.14.4  ./miniperl
-Ilib make_patchnum.pl
Updating 'git_version.h' and 'lib/Config_git.pl'
longjmp botch.
*** Signal 6

Stop.
make: stopped in /usr/ports/lang/perl5.14/work/perl-5.14.4
*** Error code 1 (ignored)

You may see some irrelevant test failures if you have been unable
to build lib/Config.pm, or the Unicode data files.

cd t  (rm -f perl; /bin/ln -s ../miniperl perl)  
LD_LIBRARY_PATH=/usr/ports/lang/perl5.14/work/perl-5.14.4  ./perl TEST
base/*.t comp/*.t cmd/*.t run/*.t io/*.t re/*.t op/*.t uni/*.t
/dev/tty
t/base/cond.longjmp botch.
FAILED--no leader found
Failed a basic test (base/cond.t) -- cannot continue.
longjmp botch.
*** Signal 6 (ignored)
/bin/ln -s perldelta.pod pod/perl5144delta.pod
LD_LIBRARY_PATH=/usr/ports/lang/perl5.14/work/perl-5.14.4  ./miniperl
-Ilib autodoc.pl
longjmp botch.
*** Signal 6

Stop.
make: stopped in /usr/ports/lang/perl5.14/work/perl-5.14.4
*** Error code 1

Stop.
make: stopped in /usr/ports/lang/perl5.14
*** Error code 1

Stop.
make: stopped in /usr/ports/lang/perl5.14

=== make failed for lang/perl5.14
=== Aborting update

=== Killing background jobs
Terminated

=== You can restart from the point of failure with this command line:
   portmaster flags lang/perl5.14

=== Exiting
___
freebsd-current@freebsd.org mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-current
To unsubscribe, send any mail to freebsd-current-unsubscr...@freebsd.org

Re: RaspberryPi (ARMv6) after update EABI not build perl

[Andrey Fesenko]

Sory,
# uname -a
FreeBSD raspberry-pi 10.0-CURRENT FreeBSD 10.0-CURRENT #0 r253414M:
Wed Jul 17 16:12:39 MSK 2013
andrey@my_book.local:/home/andrey/obj/arm.armv6/usr/src/sys/RPI-B-IPv6
 arm

system compile clang

On Thu, Jul 18, 2013 at 10:15 PM, Andrey Fesenko f0and...@gmail.com wrote:
 Hi, anyone succeeded build perl for eabi? my rpi make results in an
 error equally for all perl version

 #define PERL_FPU_INIT (void)fpsetmask(0)
 ^
 1 warning generated.
 LD_LIBRARY_PATH=/usr/ports/lang/perl5.14/work/perl-5.14.4 cc -pthread
 -Wl,-E  -fstack-protector -L/usr/local/lib -o miniperlgv.o toke.o
 perly.o pad.o regcomp.o dump.o util.o mg.o reentr.o mro.o keywords.o
 hv.o av.o run.o pp_hot.o sv.o pp.o scope.o pp_ctl.o pp_sys.o doop.o
 doio.o regexec.o utf8.o taint.o deb.o universal.o globals.o perlio.o
 perlapi.o numeric.o mathoms.o locale.o pp_pack.o pp_sort.o
 miniperlmain.o opmini.o perlmini.o -lm -lcrypt -lutil
 LD_LIBRARY_PATH=/usr/ports/lang/perl5.14/work/perl-5.14.4  ./miniperl
 -w -Ilib -MExporter -e '?' || /usr/bin/make minitest
 longjmp botch.
 Abort trap (core dumped)
 LD_LIBRARY_PATH=/usr/ports/lang/perl5.14/work/perl-5.14.4  ./miniperl
 -Ilib make_patchnum.pl
 Updating 'git_version.h' and 'lib/Config_git.pl'
 longjmp botch.
 *** Signal 6

 Stop.
 make: stopped in /usr/ports/lang/perl5.14/work/perl-5.14.4
 *** Error code 1 (ignored)

 You may see some irrelevant test failures if you have been unable
 to build lib/Config.pm, or the Unicode data files.

 cd t  (rm -f perl; /bin/ln -s ../miniperl perl)  
 LD_LIBRARY_PATH=/usr/ports/lang/perl5.14/work/perl-5.14.4  ./perl TEST
 base/*.t comp/*.t cmd/*.t run/*.t io/*.t re/*.t op/*.t uni/*.t
 /dev/tty
 t/base/cond.longjmp botch.
 FAILED--no leader found
 Failed a basic test (base/cond.t) -- cannot continue.
 longjmp botch.
 *** Signal 6 (ignored)
 /bin/ln -s perldelta.pod pod/perl5144delta.pod
 LD_LIBRARY_PATH=/usr/ports/lang/perl5.14/work/perl-5.14.4  ./miniperl
 -Ilib autodoc.pl
 longjmp botch.
 *** Signal 6

 Stop.
 make: stopped in /usr/ports/lang/perl5.14/work/perl-5.14.4
 *** Error code 1

 Stop.
 make: stopped in /usr/ports/lang/perl5.14
 *** Error code 1

 Stop.
 make: stopped in /usr/ports/lang/perl5.14

 === make failed for lang/perl5.14
 === Aborting update

 === Killing background jobs
 Terminated

 === You can restart from the point of failure with this command line:
portmaster flags lang/perl5.14

 === Exiting
___
freebsd-current@freebsd.org mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-current
To unsubscribe, send any mail to freebsd-current-unsubscr...@freebsd.org

Re: Kernel build fails on ARM: Cannot fork: Cannot allocate memory

[Andrey Fesenko]

On Wed, Jun 19, 2013 at 10:15 PM, Zbyszek Bodek z...@semihalf.com wrote:
 Hello,

 I've been trying to compile the kernel on my ARMv7 platform using the
 sources from the current FreeBSD HEAD.

 make buildkernel . -j5

 1/2 builds fails in the way described below:
 --
 ing-include-dirs -fdiagnostics-show-option   -nostdinc  -I.
 -I/root/src/freebsd-arm-superpages/sys
 -I/root/src/freebsd-arm-superpages/sys/contrib/altq
 -I/root/src/freebsd-arm-superpages/sys/contrib/libfdt -D_KERNEL
 -DHAVE_KERNEL_OPTION_HEADERS -include opt_global.h -fno-common
 -finline-limit=8000 --param inline-unit-growth=100 --param
 large-function-growth=1000  -mno-thumb-interwork -ffreestanding -Werror
  /root/src/freebsd-arm-superpages/sys/ufs/ffs/ffs_snapshot.c
 Cannot fork: Cannot allocate memory
 *** [ffs_snapshot.o] Error code 2
 1 error
 *** [buildkernel] Error code 2
 1 error
 *** [buildkernel] Error code 2
 1 error
 5487.888u 481.569s 7:35.65 1310.0%  1443+167k 1741+5388io 221pf+0w
 --


-j5 tricky :) I think it is necessary to build one may be in two
streams, as well as make the swap
___
freebsd-current@freebsd.org mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-current
To unsubscribe, send any mail to freebsd-current-unsubscr...@freebsd.org

Re: mdoc warning: .Fx: Unknown FreeBSD version `10' (#181)

[Andrey Fesenko]

On Sat, Mar 16, 2013 at 8:59 PM, deeptech71 deeptec...@gmail.com wrote:
 When running ``man script'' (world r248258), I get:

   mdoc warning: .Fx: Unknown FreeBSD version `10' (#181)

 (and the whole man page, which quickly hides the warning).

reproduce

# whereis man
man: /usr/bin/man /usr/share/man/man1/man.1.gz /usr/src/usr.bin/man
# uname -a
FreeBSD x220.local 10.0-CURRENT FreeBSD 10.0-CURRENT #0 r248378: Sun
Mar 17 00:11:12 MSK 2013
andrey@x220.local:/usr/obj/usr/src/sys/W_BOOK  amd64

 % man script | head -1
mdoc warning: .Fx: Unknown FreeBSD version `10' (#181)
SCRIPT(1)   FreeBSD General Commands Manual  SCRIPT(1)

not correct macros .Fx may be fix
 % diff script.1 script.1.orig
181c181
 .Fx 10.0 .
---
 .Fx 10 .

mandoc without this error
___
freebsd-current@freebsd.org mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-current
To unsubscribe, send any mail to freebsd-current-unsubscr...@freebsd.org

SDL No available video device (sdl12 installed)

[Andrey Fesenko]

Hello,
do not run the game using sdl.

% uname -a
FreeBSD x220.local 10.0-CURRENT FreeBSD 10.0-CURRENT #0 r246229: Sat
Feb  2 17:42:00 UTC 2013
andrey@x220.local:/usr/obj/usr/src/sys/W_BOOK  amd64

# cat /etc/make.conf
WITH_NEW_XORG=true
WITH_KMS=true

X.Org X Server 1.10.6
Release Date: 2012-02-10
intel(0): Integrated Graphics Chipset: Intel(R) Sandybridge Mobile (GT2+)

# pkg info | grep ^sdl
sdl-1.2.15_2,2 Cross-platform multimedia development API
sdl_gfx-2.0.23 SDL graphics drawing primitives and
other support functions
sdl_image-1.2.12_1 A simple library to load images of
various formats as SDL surfaces
sdl_mixer-1.2.12_2 A sample multi-channel audio mixer library
sdl_net-1.2.8  A small sample cross-platform networking library
sdl_pango-0.1.2_7  SDL_Pango is the SDL API to the Pango
text rendering engine of GNOME 2.x
sdl_ttf-2.0.11 A library to use TrueType fonts to
render text in SDL applications

% sdl-config --version
1.2.15
% sdl-config --libs
-L/usr/local/lib -Wl,-rpath,/usr/local/lib -lSDL -pthread
% sdl-config --cflags
-I/usr/local/include/SDL -I/usr/local/include -D_GNU_SOURCE=1 -D_REENTRANT

% ufo
...
--- video initialization ---
Video SDL_Init failed: No available video device

% openttd -I OpenGFX -S OpenSFX -M OpenMSX
Error: Couldn't find any suitable video driver
% openttd -I OpenGFX -S OpenSFX -M OpenMSX -v sdl
Error: Unable to load driver 'sdl'. The error was: No available video device
___
freebsd-current@freebsd.org mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-current
To unsubscribe, send any mail to freebsd-current-unsubscr...@freebsd.org

Re: x220 notes

[Andrey Fesenko]

On Thu, Jan 31, 2013 at 8:56 AM, Thomas Mueller
mueller6...@bellsouth.net wrote:
 Excerpt from Andrey Fesenko f0and...@gmail.com:

 And other problems.
 1) wi-fi
 standart rtl8192cu - not work
 change AR5B95 - work n-mode (thanks Adrian Chadd :) need hack BIOS
 dev.acpi_ibm.0.wlan: 1 - read only
 hardware switch work, not send mesage

 What did you try to make rtl8192cu work?  Did you try NDIS?

 I have Hiro USB wireless adapter with rtl8191s chip, am still trying, on and
 off, to get it to work.

 OpenBSD has urtwn driver that should work, ported to NetBSD, but why not
 FreeBSD?  ALso, there is a Linux driver.

 Tom

NDIS failed to raise working version. Win driver terrible ~5 firmware and other.

urtwn such as usb devices and no porting FreeBSD only dirty hack
http://lists.freebsd.org/pipermail/freebsd-wireless/2012-November/002539.html

just wanted to get wi-fi n-mode :) actively developed now like only ath.
___
freebsd-current@freebsd.org mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-current
To unsubscribe, send any mail to freebsd-current-unsubscr...@freebsd.org

Re: x220 notes

[Andrey Fesenko]

On Wed, Mar 14, 2012 at 11:15 PM, Hannes Mehnert han...@mehnert.org wrote:
 Ciao,

 On 03/14/2012 00:38, matt wrote:
 I have brightness control through raw acpi...\_BCL and friends seem to
 do nothing.

 Most of the video methods differentiate between \VIGD (which seems to be
 a check for integrated graphics vs optimus, but that's still a guess)
 If \VIGD is true, brightness commands are sent to the EC, where they
 don't seem to do much yet. This is probably where we could enable
 something via EC/ibm-acpi?
 If \VIGD is false, brightness commands are handled in ACPI, although
 coarsely, via \VBRC.

 \VBRC seems to allow control over the backlight, at least, so those of
 you with sore eyes or the 3-cell battery may have some success using the
 acpi_call port (Danger!)
 kldload acpi_call
 acpi_call -p '\VBRC' -i n (where n is 0-10)

 Great news! Works for me. n is actually 0-16 (plus any other value which
 turns the backlight off (-1 or 17 eg).


 Thanks,

 Hannes


Thanks, acpi_call -p '\VBRC' -i n [0-15] work fine, if set 17 black screen :)

And other problems.
1) wi-fi
standart rtl8192cu - not work
change AR5B95 - work n-mode (thanks Adrian Chadd :) need hack BIOS
dev.acpi_ibm.0.wlan: 1 - read only
hardware switch work, not send mesage

2) sound
 # cat /dev/sndstat
FreeBSD Audio Driver (newpcm: 64bit 2009061500/amd64)
Installed devices:
pcm0: Conexant CX20590 (Analog) (play/rec)
pcm1: Conexant CX20590 (Analog) (play/rec) default
pcm2: Intel Cougar Point (HDMI/DP 8ch) (play)
pcm3: Intel Cougar Point (HDMI/DP 8ch) (play)
pcm4: Intel Cougar Point (HDMI/DP 8ch) (play)
sound headphones only, if set sysctl hw.snd.default_unit=0 and restart
application, on's speakers (if remove headphones).
Automatic switching possible?
2.2) sound control
in mplayer automatic fine work multimedia key
multimedia key and system mixer, and sysctl not work

xev data VolUP, VolDn, mute (release event similar)
KeyPress event, serial 27, synthetic NO, window 0x1e1,
root 0x120, subw 0x0, time 210234226, (623,634), root:(623,650),
state 0x10, keycode 176 (keysym 0x1008ff13, XF86AudioRaiseVolume),
same_screen YES,
XLookupString gives 0 bytes:
XFilterEvent returns: False

KeyPress event, serial 27, synthetic NO, window 0x1e1,
root 0x120, subw 0x0, time 210235273, (623,634), root:(623,650),
state 0x10, keycode 174 (keysym 0x1008ff11, XF86AudioLowerVolume),
same_screen YES,
XLookupString gives 0 bytes:
XmbLookupString gives 0 bytes:
XFilterEvent returns: False

KeyPress event, serial 27, synthetic NO, window 0x1e1,
root 0x120, subw 0x0, time 210241638, (623,634), root:(623,650),
state 0x10, keycode 140 (keysym 0x0, NoSymbol), same_screen YES,
XLookupString gives 0 bytes:
XmbLookupString gives 0 bytes:
XFilterEvent returns: False


3) ACPI work poorly
191 0x81f01000 37c7 acpi_video.ko
201 0x81f05000 330f acpi_ibm.ko
211 0x81f09000 1fc  acpi_call.ko
# sysctl -a | grep ibm
acpi_ibm0: IBM ThinkPad ACPI Extras on acpi0
acpi_ibm0: detached
acpi_ibm0: IBM ThinkPad ACPI Extras on acpi0
dev.acpi_ibm.0.%desc: IBM ThinkPad ACPI Extras
dev.acpi_ibm.0.%driver: acpi_ibm
dev.acpi_ibm.0.%location: handle=\_SB_.PCI0.LPC_.EC__.HKEY
dev.acpi_ibm.0.%pnpinfo: _HID=LEN0068 _UID=0
dev.acpi_ibm.0.%parent: acpi0
dev.acpi_ibm.0.initialmask: 2060
dev.acpi_ibm.0.availmask: 134217727
dev.acpi_ibm.0.events: 1
dev.acpi_ibm.0.eventmask: 134217727
dev.acpi_ibm.0.hotkey: 3353
dev.acpi_ibm.0.lcd_brightness: 0 - not work
dev.acpi_ibm.0.volume: 0 - not work
dev.acpi_ibm.0.mute: 0 - not work
dev.acpi_ibm.0.thinklight: 0 - work fine :)
dev.acpi_ibm.0.bluetooth: 0 - work LED (bt not use, not test)
dev.acpi_ibm.0.wlan: 1 - read only
dev.acpi_ibm.0.fan_speed: 3880 - not work or read only
dev.acpi_ibm.0.fan_level: 0
dev.acpi_ibm.0.fan: 1

LED HDD may be work blink infrequently SSD :)

3) video work acceptable
WITH_NEW_XORG=true
WITH_KMS=true

from terminal adjustable brightness
acpi_call -p '\VBRC' -i n [0-15]
I would like to consolidate these actions on the standard key # cat
/var/run/devd.pipe
!system=ACPI subsystem=IBM type=\_SB_.PCI0.LPC_.EC__.HKEY notify=0x10 ( Fn+Home)
!system=ACPI subsystem=IBM type=\_SB_.PCI0.LPC_.EC__.HKEY notify=0x11 (Fn+End)

4) mouse Xorg with out config
standard trackpad and other work fine

if hook up USB mouse not work
Jan 27 17:53:23 x220 kernel: ugen1.3: A4Tech at usbus1
Jan 27 17:53:23 x220 kernel: ums0: A4Tech USB Mouse, class 0/0, rev
1.10/0.14, addr 3 on usbus1
Jan 27 17:53:23 x220 kernel: ums0: 8 buttons and [XYZ] coordinates ID=0
and  disconnect
Jan 27 17:53:42 x220 kernel: ugen1.3: A4Tech at usbus1 (disconnected)
Jan 27 17:53:42 x220 kernel: ums0: at uhub3, port 2, addr 3 (disconnected)


5) suspend/resume not test while, if there is a manual will be grateful

Trick, to work without xorg.conf :)
# cat /home/andrey/.xsession
/usr/local/bin/xset +fp /usr/local/lib/X11/fonts/terminus-font/
 - need some applications
xkbset -b
   

AR9285 not see n-channels

[Andrey Fesenko]

I have
# uname -a
FreeBSD beastie.mydomain.local 10.0-CURRENT FreeBSD 10.0-CURRENT #1
r243259: Mon Nov 19 09:28:08 MSK 2012
root@beastie.mydomain.local:/usr/obj/usr/src/sys/W_BOOK  amd64
 # grep ATH /usr/src/sys/amd64/conf/W_BOOK
options ATH_ENABLE_11N
options ATH_DEBUG
options ATH_DIAGAPI

pciconf
ath0@pci0:5:0:0:class=0x028000 card=0xe016105b chip=0x002b168c
rev=0x01 hdr=0x00
vendor = 'Atheros Communications Inc.'
device = 'AR9285 Wireless Network Adapter (PCI-Express)'
class  = network


# ifconfig -v wlan0 list channel
Channel   1 : 2412  MHz 11b  Channel   7 : 2442  MHz 11g ht/20
Channel   1 : 2412  MHz 11g  Channel   8 : 2447  MHz 11b
Channel   1 : 2412  MHz 11g ht/20Channel   8 : 2447  MHz 11g
Channel   2 : 2417  MHz 11b  Channel   8 : 2447  MHz 11g ht/20
Channel   2 : 2417  MHz 11g  Channel   9 : 2452  MHz 11b


wi-fi router have and enable n-mode (linksys e4200)
How to turn on or activate n-mode?
___
freebsd-current@freebsd.org mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-current
To unsubscribe, send any mail to freebsd-current-unsubscr...@freebsd.org

Re: AR9285 not see n-channels

[Andrey Fesenko]

On Thu, Dec 13, 2012 at 4:32 AM, Adrian Chadd adr...@freebsd.org wrote:
 What's 'ifconfig wlan0' and 'ifconfig wlan0 list sta' look like?



 adrian


 On 12 December 2012 15:51, Andrey Fesenko f0and...@gmail.com wrote:
 I have
 # uname -a
 FreeBSD beastie.mydomain.local 10.0-CURRENT FreeBSD 10.0-CURRENT #1
 r243259: Mon Nov 19 09:28:08 MSK 2012
 root@beastie.mydomain.local:/usr/obj/usr/src/sys/W_BOOK  amd64
  # grep ATH /usr/src/sys/amd64/conf/W_BOOK
 options ATH_ENABLE_11N
 options ATH_DEBUG
 options ATH_DIAGAPI

 pciconf
 ath0@pci0:5:0:0:class=0x028000 card=0xe016105b chip=0x002b168c
 rev=0x01 hdr=0x00
 vendor = 'Atheros Communications Inc.'
 device = 'AR9285 Wireless Network Adapter (PCI-Express)'
 class  = network


 # ifconfig -v wlan0 list channel
 Channel   1 : 2412  MHz 11b  Channel   7 : 2442  MHz 11g 
 ht/20
 Channel   1 : 2412  MHz 11g  Channel   8 : 2447  MHz 11b
 Channel   1 : 2412  MHz 11g ht/20Channel   8 : 2447  MHz 11g
 Channel   2 : 2417  MHz 11b  Channel   8 : 2447  MHz 11g 
 ht/20
 Channel   2 : 2417  MHz 11g  Channel   9 : 2452  MHz 11b
 

 wi-fi router have and enable n-mode (linksys e4200)
 How to turn on or activate n-mode?

# ifconfig wlan0 list sta
ADDR   AID CHAN RATE RSSI IDLE  TXSEQ  RXSEQ CAPS FLAG
58:6d:8f:fa:d9:505   12  72M 27.50   2079  31872 EP   AQEHTRS
RSN HTCAP WME WPS
 # ifconfig wlan0
wlan0: flags=8843UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST metric 0 mtu 1500
ether 4c:0f:6e:4b:4e:f5
inet 192.168.1.41 netmask 0xff00 broadcast 192.168.1.255
nd6 options=29PERFORMNUD,IFDISABLED,AUTO_LINKLOCAL
media: IEEE 802.11 Wireless Ethernet MCS mode 11ng
status: associated
ssid hometest channel 12 (2467 MHz 11g ht/20) bssid 58:6d:8f:fa:d9:50
regdomain 101 indoor ecm authmode WPA2/802.11i privacy ON
deftxkey UNDEF AES-CCM 2:128-bit AES-CCM 3:128-bit txpower 20 bmiss 7
scanvalid 60 protmode CTS ampdulimit 64k ampdudensity 4 shortgi wme
burst roaming MANUAL
___
freebsd-current@freebsd.org mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-current
To unsubscribe, send any mail to freebsd-current-unsubscr...@freebsd.org

Re: AR9285 not see n-channels

[Andrey Fesenko]

On Thu, Dec 13, 2012 at 4:44 AM, Adrian Chadd adrian.ch...@gmail.com wrote:
 Yup. It's doing 11n rates.

 Compile and run athstats, it'll tell you how many aggregate frames are being
 sent and received.



 Adrian

 Sent from my Palm Pre on ATT

 
 On Dec 12, 2012 4:39 PM, Andrey Fesenko f0and...@gmail.com wrote:

 On Thu, Dec 13, 2012 at 4:32 AM, Adrian Chadd adr...@freebsd.org wrote:
 What's 'ifconfig wlan0' and 'ifconfig wlan0 list sta' look like?



 adrian


 On 12 December 2012 15:51, Andrey Fesenko f0and...@gmail.com wrote:
 I have
 # uname -a
 FreeBSD beastie.mydomain.local 10.0-CURRENT FreeBSD 10.0-CURRENT #1
 r243259: Mon Nov 19 09:28:08 MSK 2012
 root@beastie.mydomain.local:/usr/obj/usr/src/sys/W_BOOK amd64
 # grep ATH /usr/src/sys/amd64/conf/W_BOOK
 options ATH_ENABLE_11N
 options ATH_DEBUG
 options ATH_DIAGAPI

 pciconf
 ath0@pci0:5:0:0: class=0x028000 card=0xe016105b chip=0x002b168c
 rev=0x01 hdr=0x00
 vendor = 'Atheros Communications Inc.'
 device = 'AR9285 Wireless Network Adapter (PCI-Express)'
 class = network


 # ifconfig -v wlan0 list channel
 Channel 1 : 2412 MHz 11b Channel 7 : 2442 MHz 11g ht/20
 Channel 1 : 2412 MHz 11g Channel 8 : 2447 MHz 11b
 Channel 1 : 2412 MHz 11g ht/20 Channel 8 : 2447 MHz 11g
 Channel 2 : 2417 MHz 11b Channel 8 : 2447 MHz 11g ht/20
 Channel 2 : 2417 MHz 11g Channel 9 : 2452 MHz 11b
 

 wi-fi router have and enable n-mode (linksys e4200)
 How to turn on or activate n-mode?

 # ifconfig wlan0 list sta
 ADDR AID CHAN RATE RSSI IDLE TXSEQ RXSEQ CAPS FLAG
 58:6d:8f:fa:d9:50 5 12 72M 27.5 0 2079 31872 EP AQEHTRS
 RSN HTCAP WME WPS
 # ifconfig wlan0
 wlan0: flags=8843UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST metric 0 mtu 1500
 ether 4c:0f:6e:4b:4e:f5
 inet 192.168.1.41 netmask 0xff00 broadcast 192.168.1.255
 nd6 options=29PERFORMNUD,IFDISABLED,AUTO_LINKLOCAL
 media: IEEE 802.11 Wireless Ethernet MCS mode 11ng
 status: associated
 ssid hometest channel 12 (2467 MHz 11g ht/20) bssid 58:6d:8f:fa:d9:50
 regdomain 101 indoor ecm authmode WPA2/802.11i privacy ON
 deftxkey UNDEF AES-CCM 2:128-bit AES-CCM 3:128-bit txpower 20 bmiss 7
 scanvalid 60 protmode CTS ampdulimit 64k ampdudensity 4 shortgi wme
 burst roaming MANUAL

# ./athstats
526213   data frames received
10205data frames transmit
79   short on-chip tx retries
103  long on-chip tx retries
16   tx failed 'cuz too many retries
220  mib overflow interrupts
MCS7 current transmit rate
1watchdog timeouts
42   beacon miss interrupts
23154rx failed 'cuz of bad CRC
56   rx failed 'cuz of PHY err
56   illegal service
1638 periodic calibrations
-0/+0TDMA slot adjust (usecs, smoothed)
56   rssi of last ack
50   avg recv rssi
-96  rx noise floor
13   phantom beacon misses
6569 tx frames through raw api
1460 A-MPDU sub-frames received
183  Half-GI frames received
183  40MHz frames received
2397 CRC errors for non-last A-MPDU subframes
3151 Frames transmitted with HT Protection
25   A-MPDU sub-frame TX attempt success
2first step level
1OFDM weak signal detect
268  listen time
190  ANI increased spur immunity
174  ANI decrease spur immunity
2ANI enabled OFDM weak signal detect
3517 ANI disabled OFDM weak signal detect
3515 ANI disabled CCK weak signal threshold
4ANI increased first step level
2ANI decreased first step level
154772   cumulative OFDM phy error count
528256   cumulative CCK phy error count
851  ANI forced listen time to zero
26   missing ACK's
78   RTS without CTS
3135 successful RTS
65747bad FCS
473007   beacons received
53   average rssi (beacons only)
35   average rssi (all rx'd frames)
48   average rssi (ACKs only)
Antenna profile:
[0] tx10173 rx4
[1] tx0 rx   526209


# ./athaggrstats
17   single frames scheduled
9aggregate frames scheduled
1217 single frames scheduled due to low HWQ depth

Aggregate size profile:

 0:0  1:0  2:6  3:2
 4:0  5:0  6:0  7:1
 8:0  9:0 10:0 11:0
___
freebsd-current@freebsd.org mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-current
To unsubscribe, send any mail to freebsd-current-unsubscr...@freebsd.org

Re: AR9285 not see n-channels

[Andrey Fesenko]

On Thu, Dec 13, 2012 at 4:55 AM, Adrian Chadd adrian.ch...@gmail.com wrote:
 .. yup, you're doing 11n! Welcome!



 Adrian

 On 12 December 2012 16:54, Andrey Fesenko f0and...@gmail.com wrote:
 On Thu, Dec 13, 2012 at 4:44 AM, Adrian Chadd adrian.ch...@gmail.com wrote:
 Yup. It's doing 11n rates.

 Compile and run athstats, it'll tell you how many aggregate frames are being
 sent and received.



 Adrian

 Sent from my Palm Pre on ATT

 
 On Dec 12, 2012 4:39 PM, Andrey Fesenko f0and...@gmail.com wrote:

 On Thu, Dec 13, 2012 at 4:32 AM, Adrian Chadd adr...@freebsd.org wrote:
 What's 'ifconfig wlan0' and 'ifconfig wlan0 list sta' look like?



 adrian


 On 12 December 2012 15:51, Andrey Fesenko f0and...@gmail.com wrote:
 I have
 # uname -a
 FreeBSD beastie.mydomain.local 10.0-CURRENT FreeBSD 10.0-CURRENT #1
 r243259: Mon Nov 19 09:28:08 MSK 2012
 root@beastie.mydomain.local:/usr/obj/usr/src/sys/W_BOOK amd64
 # grep ATH /usr/src/sys/amd64/conf/W_BOOK
 options ATH_ENABLE_11N
 options ATH_DEBUG
 options ATH_DIAGAPI

 pciconf
 ath0@pci0:5:0:0: class=0x028000 card=0xe016105b chip=0x002b168c
 rev=0x01 hdr=0x00
 vendor = 'Atheros Communications Inc.'
 device = 'AR9285 Wireless Network Adapter (PCI-Express)'
 class = network


 # ifconfig -v wlan0 list channel
 Channel 1 : 2412 MHz 11b Channel 7 : 2442 MHz 11g ht/20
 Channel 1 : 2412 MHz 11g Channel 8 : 2447 MHz 11b
 Channel 1 : 2412 MHz 11g ht/20 Channel 8 : 2447 MHz 11g
 Channel 2 : 2417 MHz 11b Channel 8 : 2447 MHz 11g ht/20
 Channel 2 : 2417 MHz 11g Channel 9 : 2452 MHz 11b
 

 wi-fi router have and enable n-mode (linksys e4200)
 How to turn on or activate n-mode?

 # ifconfig wlan0 list sta
 ADDR AID CHAN RATE RSSI IDLE TXSEQ RXSEQ CAPS FLAG
 58:6d:8f:fa:d9:50 5 12 72M 27.5 0 2079 31872 EP AQEHTRS
 RSN HTCAP WME WPS
 # ifconfig wlan0
 wlan0: flags=8843UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST metric 0 mtu 1500
 ether 4c:0f:6e:4b:4e:f5
 inet 192.168.1.41 netmask 0xff00 broadcast 192.168.1.255
 nd6 options=29PERFORMNUD,IFDISABLED,AUTO_LINKLOCAL
 media: IEEE 802.11 Wireless Ethernet MCS mode 11ng
 status: associated
 ssid hometest channel 12 (2467 MHz 11g ht/20) bssid 58:6d:8f:fa:d9:50
 regdomain 101 indoor ecm authmode WPA2/802.11i privacy ON
 deftxkey UNDEF AES-CCM 2:128-bit AES-CCM 3:128-bit txpower 20 bmiss 7
 scanvalid 60 protmode CTS ampdulimit 64k ampdudensity 4 shortgi wme
 burst roaming MANUAL

 # ./athstats
 526213   data frames received
 10205data frames transmit
 79   short on-chip tx retries
 103  long on-chip tx retries
 16   tx failed 'cuz too many retries
 220  mib overflow interrupts
 MCS7 current transmit rate
 1watchdog timeouts
 42   beacon miss interrupts
 23154rx failed 'cuz of bad CRC
 56   rx failed 'cuz of PHY err
 56   illegal service
 1638 periodic calibrations
 -0/+0TDMA slot adjust (usecs, smoothed)
 56   rssi of last ack
 50   avg recv rssi
 -96  rx noise floor
 13   phantom beacon misses
 6569 tx frames through raw api
 1460 A-MPDU sub-frames received
 183  Half-GI frames received
 183  40MHz frames received
 2397 CRC errors for non-last A-MPDU subframes
 3151 Frames transmitted with HT Protection
 25   A-MPDU sub-frame TX attempt success
 2first step level
 1OFDM weak signal detect
 268  listen time
 190  ANI increased spur immunity
 174  ANI decrease spur immunity
 2ANI enabled OFDM weak signal detect
 3517 ANI disabled OFDM weak signal detect
 3515 ANI disabled CCK weak signal threshold
 4ANI increased first step level
 2ANI decreased first step level
 154772   cumulative OFDM phy error count
 528256   cumulative CCK phy error count
 851  ANI forced listen time to zero
 26   missing ACK's
 78   RTS without CTS
 3135 successful RTS
 65747bad FCS
 473007   beacons received
 53   average rssi (beacons only)
 35   average rssi (all rx'd frames)
 48   average rssi (ACKs only)
 Antenna profile:
 [0] tx10173 rx4
 [1] tx0 rx   526209


 # ./athaggrstats
 17   single frames scheduled
 9aggregate frames scheduled
 1217 single frames scheduled due to low HWQ depth

 Aggregate size profile:

  0:0  1:0  2:6  3:2
  4:0  5:0  6:0  7:1
  8:0  9:0 10:0 11:0

why # ifconfig -v wlan0 list channel
show only b and g channels? and only 13? or this restriction AR9285

though
# iperf -i 10 -t 20 -c 192.168.1.26 -w 1024K -l 1024K

Client connecting to 192.168.1.26, TCP port 5001
TCP window size: 1.00 MByte

Re: AR9285 not see n-channels

[Andrey Fesenko]

On Thu, Dec 13, 2012 at 5:33 AM, Adrian Chadd adrian.ch...@gmail.com wrote:
 Hi,

 The AR9285 is a 2GHz only NIC.

 The channel list shows 11b, 11bg, HT20 and HT40 channels.

 It all looks right, why don't you think it is?


 Adrian


 On 12 December 2012 17:32, Andrey Fesenko f0and...@gmail.com wrote:
 On Thu, Dec 13, 2012 at 4:55 AM, Adrian Chadd adrian.ch...@gmail.com wrote:
 .. yup, you're doing 11n! Welcome!



 Adrian

 On 12 December 2012 16:54, Andrey Fesenko f0and...@gmail.com wrote:
 On Thu, Dec 13, 2012 at 4:44 AM, Adrian Chadd adrian.ch...@gmail.com 
 wrote:
 Yup. It's doing 11n rates.

 Compile and run athstats, it'll tell you how many aggregate frames are 
 being
 sent and received.



 Adrian

 Sent from my Palm Pre on ATT

 
 On Dec 12, 2012 4:39 PM, Andrey Fesenko f0and...@gmail.com wrote:

 On Thu, Dec 13, 2012 at 4:32 AM, Adrian Chadd adr...@freebsd.org wrote:
 What's 'ifconfig wlan0' and 'ifconfig wlan0 list sta' look like?



 adrian


 On 12 December 2012 15:51, Andrey Fesenko f0and...@gmail.com wrote:
 I have
 # uname -a
 FreeBSD beastie.mydomain.local 10.0-CURRENT FreeBSD 10.0-CURRENT #1
 r243259: Mon Nov 19 09:28:08 MSK 2012
 root@beastie.mydomain.local:/usr/obj/usr/src/sys/W_BOOK amd64
 # grep ATH /usr/src/sys/amd64/conf/W_BOOK
 options ATH_ENABLE_11N
 options ATH_DEBUG
 options ATH_DIAGAPI

 pciconf
 ath0@pci0:5:0:0: class=0x028000 card=0xe016105b chip=0x002b168c
 rev=0x01 hdr=0x00
 vendor = 'Atheros Communications Inc.'
 device = 'AR9285 Wireless Network Adapter (PCI-Express)'
 class = network


 # ifconfig -v wlan0 list channel
 Channel 1 : 2412 MHz 11b Channel 7 : 2442 MHz 11g ht/20
 Channel 1 : 2412 MHz 11g Channel 8 : 2447 MHz 11b
 Channel 1 : 2412 MHz 11g ht/20 Channel 8 : 2447 MHz 11g
 Channel 2 : 2417 MHz 11b Channel 8 : 2447 MHz 11g ht/20
 Channel 2 : 2417 MHz 11g Channel 9 : 2452 MHz 11b
 

 wi-fi router have and enable n-mode (linksys e4200)
 How to turn on or activate n-mode?

 # ifconfig wlan0 list sta
 ADDR AID CHAN RATE RSSI IDLE TXSEQ RXSEQ CAPS FLAG
 58:6d:8f:fa:d9:50 5 12 72M 27.5 0 2079 31872 EP AQEHTRS
 RSN HTCAP WME WPS
 # ifconfig wlan0
 wlan0: flags=8843UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST metric 0 mtu 
 1500
 ether 4c:0f:6e:4b:4e:f5
 inet 192.168.1.41 netmask 0xff00 broadcast 192.168.1.255
 nd6 options=29PERFORMNUD,IFDISABLED,AUTO_LINKLOCAL
 media: IEEE 802.11 Wireless Ethernet MCS mode 11ng
 status: associated
 ssid hometest channel 12 (2467 MHz 11g ht/20) bssid 58:6d:8f:fa:d9:50
 regdomain 101 indoor ecm authmode WPA2/802.11i privacy ON
 deftxkey UNDEF AES-CCM 2:128-bit AES-CCM 3:128-bit txpower 20 bmiss 7
 scanvalid 60 protmode CTS ampdulimit 64k ampdudensity 4 shortgi wme
 burst roaming MANUAL

 # ./athstats
 526213   data frames received
 10205data frames transmit
 79   short on-chip tx retries
 103  long on-chip tx retries
 16   tx failed 'cuz too many retries
 220  mib overflow interrupts
 MCS7 current transmit rate
 1watchdog timeouts
 42   beacon miss interrupts
 23154rx failed 'cuz of bad CRC
 56   rx failed 'cuz of PHY err
 56   illegal service
 1638 periodic calibrations
 -0/+0TDMA slot adjust (usecs, smoothed)
 56   rssi of last ack
 50   avg recv rssi
 -96  rx noise floor
 13   phantom beacon misses
 6569 tx frames through raw api
 1460 A-MPDU sub-frames received
 183  Half-GI frames received
 183  40MHz frames received
 2397 CRC errors for non-last A-MPDU subframes
 3151 Frames transmitted with HT Protection
 25   A-MPDU sub-frame TX attempt success
 2first step level
 1OFDM weak signal detect
 268  listen time
 190  ANI increased spur immunity
 174  ANI decrease spur immunity
 2ANI enabled OFDM weak signal detect
 3517 ANI disabled OFDM weak signal detect
 3515 ANI disabled CCK weak signal threshold
 4ANI increased first step level
 2ANI decreased first step level
 154772   cumulative OFDM phy error count
 528256   cumulative CCK phy error count
 851  ANI forced listen time to zero
 26   missing ACK's
 78   RTS without CTS
 3135 successful RTS
 65747bad FCS
 473007   beacons received
 53   average rssi (beacons only)
 35   average rssi (all rx'd frames)
 48   average rssi (ACKs only)
 Antenna profile:
 [0] tx10173 rx4
 [1] tx0 rx   526209


 # ./athaggrstats
 17   single frames scheduled
 9aggregate frames scheduled
 1217 single frames scheduled due to low HWQ depth

 Aggregate size profile:

  0:0  1:0  2:6  3:2
  4:0  5:0  6:0  7:1
  8:0  9:0 10:0 11

Re: GPU_KMS still not working CURRENT X220

[Andrey Fesenko]

On Thu, Jun 28, 2012 at 8:15 PM, Kevin Oberman kob6...@gmail.com wrote:
 On Thu, Jun 28, 2012 at 8:45 AM, Andrey Fesenko f0and...@gmail.com wrote:
 I have lenovo thinkpad x220

 # uname -a
 FreeBSD bsdx220 10.0-CURRENT FreeBSD 10.0-CURRENT #0 r237683: Thu Jun
 28 08:41:40 MSK 2012     root@bsdx220:/usr/obj/usr/src/sys/MY_INTEL
 amd64

 # pciconf -lvb
 vgapci0@pci0:0:2:0:     class=0x03 card=0x21da17aa chip=0x01268086
 rev=0x09 hdr=0x00
    vendor     = 'Intel Corporation'
    device     = '2nd Generation Core Processor Family Integrated
 Graphics Controller'
    class      = display
    subclass   = VGA
    bar   [10] = type Memory, range 64, base 0xf000, size 4194304, enabled
    bar   [18] = type Prefetchable Memory, range 64, base 0xe000,
 size 268435456, enabled
    bar   [20] = type I/O Port, range 32, base 0x6000, size 64, enabled

 After # kldload i915kms screen is black, if # kldunload i915kms panic

 Don't do this. It has been clearly stated that i915kms my not be
 unloaded and that attempting to unload it WILL panic the system.

 Also, don't load i945kms. This WILL lock up the system with a blank screen.

 The modules required are autoloaded during Xorg initialization. Just
 make absolutely sure that you have the latest version of
 xf-video-intel. (If you installed a rather early version of the KMS
 code, it is possible that you have two xf-video.intel* ports in your
 tree, thought I don't expect this is the case.
 --
 R. Kevin Oberman, Network Engineer
 E-mail: kob6...@gmail.com

Thank you so much, it worked :)
necessary as it is written in the wiki
___
freebsd-current@freebsd.org mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-current
To unsubscribe, send any mail to freebsd-current-unsubscr...@freebsd.org

GPU_KMS still not working CURRENT X220

[Andrey Fesenko]

I have lenovo thinkpad x220

# uname -a
FreeBSD bsdx220 10.0-CURRENT FreeBSD 10.0-CURRENT #0 r237683: Thu Jun
28 08:41:40 MSK 2012 root@bsdx220:/usr/obj/usr/src/sys/MY_INTEL
amd64

# pciconf -lvb
vgapci0@pci0:0:2:0: class=0x03 card=0x21da17aa chip=0x01268086
rev=0x09 hdr=0x00
vendor = 'Intel Corporation'
device = '2nd Generation Core Processor Family Integrated
Graphics Controller'
class  = display
subclass   = VGA
bar   [10] = type Memory, range 64, base 0xf000, size 4194304, enabled
bar   [18] = type Prefetchable Memory, range 64, base 0xe000,
size 268435456, enabled
bar   [20] = type I/O Port, range 32, base 0x6000, size 64, enabled

After # kldload i915kms screen is black, if # kldunload i915kms panic

# kldstat
Id Refs AddressSize Name
 1   23 0x8020 15d3268  kernel
 21 0x81a12000 a9f3 fuse.ko
 31 0x81a1d000 690a4i915kms.ko
 41 0x81a87000 1ba2 iicbb.ko
 54 0x81a89000 1dd7 iicbus.ko
 61 0x81a8b000 1cd5 iic.ko
 71 0x81a8d000 32271drm2.ko


# sysctl -a | grep hw.dri | less
hw.dri.0.name: i915 0x9c
hw.dri.0.vm:
hw.dri.0.clients:
hw.dri.0.vblank:
hw.dri.0.info.i915_capabilities: gen: 6
hw.dri.0.info.i915_gem_objects: 8 objects, 4636672 bytes
hw.dri.0.info.i915_gem_gtt:0xfe00084cca00: p 4KiB 0001
0001 0 0 snooped (LLC) (gtt offset: , size: 1000) (p
mappable)
hw.dri.0.info.i915_gem_active: Active:
hw.dri.0.info.i915_gem_flushing: Flushing:
hw.dri.0.info.i915_gem_inactive: Inactive:
hw.dri.0.info.i915_gem_pinned: Pinned:
hw.dri.0.info.i915_gem_deferred_free: Deferred free:
hw.dri.0.info.i915_gem_pageflip: No flip due on pipe A (plane A)
hw.dri.0.info.i915_gem_request: No requests
hw.dri.0.info.i915_gem_seqno: Current sequence (render ring): 0
hw.dri.0.info.i915_gem_fence_regs: Reserved fences = 0
hw.dri.0.info.i915_gem_interrupt: North Display Interrupt enable:
 8c248080
hw.dri.0.info.i915_gem_hws: 0x: 0x 0x
0x 0x
hw.dri.0.info.i915_gem_hws_blt: 0x: 0x 0x
0x 0x
hw.dri.0.info.i915_gem_hws_bsd: 0x: 0x 0x
0x 0x
hw.dri.0.info.i915_ringbuffer_data:  :  
hw.dri.0.info.i915_ringbuffer_info: Ring render ring:
hw.dri.0.info.i915_bsd_ringbuffer_data:  :  
hw.dri.0.info.i915_bsd_ringbuffer_info: Ring gen6 bsd ring:
hw.dri.0.info.i915_blt_ringbuffer_data:  :  
hw.dri.0.info.i915_blt_ringbuffer_info: Ring blt ring:
hw.dri.0.info.i915_error_state: no error state collected
hw.dri.0.info.i915_rstdby_delays: w/ctx: 0, w/o ctx: 0
hw.dri.0.info.i915_cur_delayinfo: GT_PERF_STATUS: 0x0d83
hw.dri.0.info.i915_delayfreq_table: P00VIDFREQ: 0x (VID: 0)
hw.dri.0.info.i915_inttoext_table: INTTOEXT01: 0x
hw.dri.0.info.i915_drpc_info: RC information accurate: yes
hw.dri.0.info.i915_emon_status: Not supported
hw.dri.0.info.i915_ring_freq_table: GPU freq (MHz)  Effective CPU freq (MHz)
hw.dri.0.info.i915_gfxec: GFXEC: 0
hw.dri.0.info.i915_fbc_status: FBC disabled: no outputs
hw.dri.0.info.i915_sr_status: self-refresh: disabled
hw.dri.0.info.i915_gem_framebuffer: fbcon size: 1366 x 768, depth 24,
32 bpp, obj 0xfe000846da00: p  4128KiB 0041  0 0 uncached
(gtt offset: 00064000, size: 00408000) (p mappable)
hw.dri.0.info.i915_gen6_forcewake_count_info: forcewake count = 0
hw.dri.0.info.i915_swizzle_info: bit6 swizzle for X-tiling = bit9/bit10
hw.dri.0.info.i915_ppgtt_info: GFX_MODE: 0x0a00
hw.dri.0.info.i915_gem_wired_pages: 1132
hw.dri.0.wedged: 0
hw.dri.0.max_freq: 1300
hw.dri.0.cache_sharing: 0
hw.dri.0.sync_exec: 0
hw.dri.0.fix_mi: 0
hw.dri.0.intr_pf: 0
hw.dri.0.busid: pci::00:02.0
hw.dri.0.modesetting: 1
hw.dri.debug: 2
hw.dri.notyet: 0
hw.dri.vblank_offdelay: 5000
hw.dri.timestamp_precision: 20


# less /var/log/messages
Jun 28 17:32:17 bsdx220 kernel: drmn0: Intel SandyBridge (M) on vgapci0
Jun 28 17:32:17 bsdx220 kernel: info: [drm] MSI enabled 1 message(s)
Jun 28 17:32:17 bsdx220 kernel: info: [drm] AGP at 0xe000 256MB
Jun 28 17:32:17 bsdx220 kernel: iicbus0: Philips I2C bus on iicbb0 addr 0xff
Jun 28 17:32:17 bsdx220 kernel: iic0: I2C generic I/O on iicbus0
Jun 28 17:32:17 bsdx220 kernel: iic1: I2C generic I/O on iicbus1
Jun 28 17:32:17 bsdx220 kernel: iicbus2: Philips I2C bus on iicbb1 addr 0xff
Jun 28 17:32:17 bsdx220 kernel: iic2: I2C generic I/O on iicbus2
Jun 28 17:32:17 bsdx220 kernel: iic3: I2C generic I/O on iicbus3
Jun 28 17:32:17 bsdx220 kernel: iicbus4: Philips I2C bus on iicbb2 addr 0xff
Jun 28 17:32:17 bsdx220 kernel: iic4: I2C generic I/O on iicbus4
Jun 28 17:32:17 bsdx220 kernel: iic5: I2C generic I/O on iicbus5
Jun 28 17:32:17 bsdx220 kernel: iicbus6: Philips I2C bus on iicbb3 addr 0xff
Jun 28 17:32:17 bsdx220 kernel: iic6: I2C generic I/O on iicbus6
Jun 28 17:32:17 bsdx220 kernel: iic7: 

Re: Panic on current from yesterday during boot

[Andrey Fesenko]

On Wed, Jun 27, 2012 at 12:42 PM, Andriy Gapon a...@freebsd.org wrote:
 on 27/06/2012 11:39 Erich Dollansky said the following:
 Anyway, What would be a save way to get a trace to a disk as I do not have a
 backup system with me?

 Assuming I understand the question correctly your options are:
 - remote console (serial/firewire/etc) from another machine
 - digital camera
 - produce a crash dump (possible only after a certain point in boot sequence)


FreeBSD X220 10.0-CURRENT FreeBSD 10.0-CURRENT #2 r237631

https://lh4.googleusercontent.com/-WRY8xDPlJk4/T-rQt79wm7I/D1c/Ix6X8dkyX9k/s868/IMG_4147.jpg

In the VirtualBox this system boot no error.
___
freebsd-current@freebsd.org mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-current
To unsubscribe, send any mail to freebsd-current-unsubscr...@freebsd.org

Re: Panic on current from yesterday during boot

[Andrey Fesenko]

On Wed, Jun 27, 2012 at 1:26 PM, Andrey Fesenko f0and...@gmail.com wrote:
 On Wed, Jun 27, 2012 at 12:42 PM, Andriy Gapon a...@freebsd.org wrote:
 on 27/06/2012 11:39 Erich Dollansky said the following:
 Anyway, What would be a save way to get a trace to a disk as I do not have a
 backup system with me?

 Assuming I understand the question correctly your options are:
 - remote console (serial/firewire/etc) from another machine
 - digital camera
 - produce a crash dump (possible only after a certain point in boot sequence)


 FreeBSD X220 10.0-CURRENT FreeBSD 10.0-CURRENT #2 r237631

 https://lh4.googleusercontent.com/-WRY8xDPlJk4/T-rQt79wm7I/D1c/Ix6X8dkyX9k/s868/IMG_4147.jpg

 In the VirtualBox this system boot no error.

FreeBSD bsdx220 10.0-CURRENT FreeBSD 10.0-CURRENT #2 r237635M: Wed Jun
27 13:51:55 MSK 2012 root@bsdx220:/usr/obj/usr/src/sys/GENERIC
amd64

if use patch http://people.freebsd.org/~jkim/evxfgpe.diff boot no error
___
freebsd-current@freebsd.org mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-current
To unsubscribe, send any mail to freebsd-current-unsubscr...@freebsd.org

Re: Panic on current from yesterday during boot

[Andrey Fesenko]

On Wed, Jun 27, 2012 at 9:06 AM, Erich Dollansky
erichfreebsdl...@ovitrap.com wrote:
 Hi,

 I am getting a panix when I boot a newly compiled system with sources 
 downloaded yesterday. The panic was still there with the sources from three 
 days ago.

 The panic regards /usr/src/sys/vm/uma_core/c line 2040.

 The machine is a Lenovo X220. I do not expect anything specific loaded yet as 
 I load the Intel KMS module manually after the system is up and running on 
 the console.


confirm faced with the same error
FreeBSD X220 10.0-CURRENT FreeBSD 10.0-CURRENT #2 r237565
___
freebsd-current@freebsd.org mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-current
To unsubscribe, send any mail to freebsd-current-unsubscr...@freebsd.org

Re: FreeBSD 10 completely on IPv6, without IPv4?

[Andrey Fesenko]

On Wed, Mar 28, 2012 at 12:09 PM, O. Hartmann
ohart...@mail.zedat.fu-berlin.de wrote:
 Hello.

 Is FreeBSD 10.0-CURRENT capable/ready to be run as a IPv6-only system? I
 read some time ago that to be run still some portions of the IPv4-code
 is needed to be compiled into the system/kernel.



http://wiki.freebsd.org/IPv6Only ;)
___
freebsd-current@freebsd.org mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-current
To unsubscribe, send any mail to freebsd-current-unsubscr...@freebsd.org

gptboot rewrite, bootonce, etc.

[Andrey Fesenko]

This work if use ZFS?
My issues Root on ZFS  GPT and boot to ufs partition
http://lists.freebsd.org/pipermail/freebsd-fs/2012-January/013514.html

I test
# gpart show
=   34  625142381  ada0  GPT  (298G)
 34128 1  freebsd-boot  (64k)
162   26621952 2  freebsd-ufs  [bootonce,bootme]  (12G)
   266221148388608 3  freebsd-swap  (4.0G)
   35010722  590131693 4  freebsd-zfs  (281G)

system ada0p2 not boot.
___
freebsd-current@freebsd.org mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-current
To unsubscribe, send any mail to freebsd-current-unsubscr...@freebsd.org

Re: FreeBSD 9.0-RC1 Available...

[Andrey Fesenko]

On Sun, Oct 23, 2011 at 7:43 AM, Ken Smith kensm...@buffalo.edu wrote:

 The 9.0-RELEASE cycle will be tracked here:

        http://wiki.freebsd.org/Releng/9.0-TODO


link error, need http://wiki.freebsd.org/Releng/9.0TODO
still no actual information on this page. Branch status not actual.
___
freebsd-current@freebsd.org mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-current
To unsubscribe, send any mail to freebsd-current-unsubscr...@freebsd.org

Re: About FreeBSD 9.0 release note

[Andrey Fesenko]

On Wed, Oct 19, 2011 at 2:07 AM, Hiroki Sato h...@freebsd.org wrote:
 Hideki Yamamoto hyam...@gmail.com wrote
  in CAOEiK=_nEJ=9prg1y5fmdbbwyqxypd-3+nyomqa9asekkgh...@mail.gmail.com:

 hy Hi,
 hy
 hy Does someone know where is the draft of FreeBSD 9.0 release note?
 hy I would like to check if there is a description about new functions
 hy about MLDv2 is included or not.
 hy I think the below feature should be included in the release note as
 hy IPv6 network is getting popular.
 hy
 hy -
 hy MFC r200871:
 hy  Use ALLOW_NEW_SOURCES and BLOCK_OLD_SOURCES to signal a join or leave
 hy  with SSM MLDv2 by default.
 hy  This is current practice and complies with RFC 4604, as well as being
 hy  required by production IPv6 networks in Japan.
 hy  The behaviour may be disabled by setting the net.inet6.mld.use_allow
 hy  sysctl/tunable to 0.
 hy -

  I am already working on the relnotes and the above will be included
  as an improvement of the IPv6 stack.


If you're not complicated.
Maybe we should put a draft on the wiki?
___
freebsd-current@freebsd.org mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-current
To unsubscribe, send any mail to freebsd-current-unsubscr...@freebsd.org

Re: FreeBSD 9.0-BETA3 Available...

[Andrey Fesenko]

On Thu, Sep 29, 2011 at 5:42 AM, Ken Smith kensm...@buffalo.edu wrote:


 The 9.0-RELEASE cycle will be tracked here:

        http://wiki.freebsd.org/Releng/9.0TODO

 though the schedule listed there is still way off.  We'll re-work the
 schedule some time soon.


Last updated: 16 August 2011. :(
___
freebsd-current@freebsd.org mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-current
To unsubscribe, send any mail to freebsd-current-unsubscr...@freebsd.org

Re: only 3 of 4GB memory available on amd64 8.1-RC1

[Andrey Fesenko]

On Sun, Jun 20, 2010 at 12:26 AM, Andriy Gapon a...@icyb.net.ua wrote:
 on 19/06/2010 20:16 Andreas Tobler said the following:
 Hi all,

 I got my hands on a t60 with 4GB of RAM (BIOS displays it)

 Yes, PAE is for what we call in FreeBSD land i386.
 x86 we use for both i386 and amd64.

 Now, to the rest.
 I recently investigated this topic myself, so I can share what I learned.
 The first thing you'd want to have is SMAP information.
 You can get it at the loader prompt with 'smap' command.
 It is also reported by kernel during a verbose boot, but it is only printed to
 console; it is not saved to dmesg, because it is printed before msgbuf is 
 created.
...
 That's about all.
 I am curious as to what you would discover about your system - please share 
 with us.

 --
 Andriy Gapon


Hello

My notebook Toshiba U200-10H
Install 4Gb(2+2) bios detect 3,... not all

SMAP
tipe=01 base= len=0009fc00
tipe=02 base=0009fc00 len=0400
tipe=02 base=000e len=ee00
tipe=04 base=000eee00 len=0200
tipe=02 base=000ef000 len=00011000
tipe=01 base=0010 len=cf69
tipe=02 base=cf79 len=0001
tipe=02 base=cf7a len=0006
tipe=02 base=cf80 len=0080
tipe=02 base=fec0 len=00018000
tipe=02 base=fec2 len=8000
tipe=02 base=fed0 len=0400
tipe=02 base=fed14000 len=6000
tipe=02 base=fed1c000 len=00074000
tipe=02 base=feda len=0002
tipe=02 base=fee0 len=1000
tipe=02 base=ffb0 len=0010
tipe=02 base=ffe0 len=0020

FreeBSD 9.0-CURRENT #1 r209362: Sun Jun 20 21:44:27 MSD 2010
and...@my_book:/usr/obj/home/andrey/src_head/sys/MY_BOOK amd64
CPU: Intel(R) Core(TM)2 CPU T5600  @ 1.83GHz (1828.76-MHz K8-class CPU)
  Origin = GenuineIntel  Id = 0x6f2  Family = 6  Model = f  Stepping = 2
  
Features=0xbfebfbffFPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE
  Features2=0xe3bdSSE3,DTES64,MON,DS_CPL,VMX,EST,TM2,SSSE3,CX16,xTPR,PDCM
  AMD Features=0x20100800SYSCALL,NX,LM
  AMD Features2=0x1LAHF
  TSC: P-state invariant
real memory  = 4294967296 (4096 MB)
Physical memory chunk(s):
0x1000 - 0x0009bfff, 634880 bytes (155 pages)
0x0126a000 - 0xc95dafff, 3359051776 bytes (820081 pages)
avail memory = 3339898880 (3185 MB)

full dmesg+debug http://www.suahbsd.org/dmesg.boot.dbg
___
freebsd-current@freebsd.org mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-current
To unsubscribe, send any mail to freebsd-current-unsubscr...@freebsd.org

Re: only 3 of 4GB memory available on amd64 8.1-RC1

[Andrey Fesenko]

On Sat, Jun 19, 2010 at 9:16 PM, Andreas Tobler andreast-l...@fgznet.ch wrote:
 Hi all,

 I got my hands on a t60 with 4GB of RAM (BIOS displays it)

 And I installed 8.1-RC1 on it:

 FreeBSD 8.1-RC1 #0: Mon Jun 14 13:40:28 UTC 2010
    r...@mason.cse.buffalo.edu:/usr/obj/usr/src/sys/GENERIC amd64
 Timecounter i8254 frequency 1193182 Hz quality 0
 CPU: Intel(R) Core(TM)2 CPU         T5600  @ 1.83GHz (1828.76-MHz K8-class
 CPU)
  Origin = GenuineIntel  Id = 0x6f6  Family = 6  Model = f  Stepping = 6

 Features=0xbfebfbffFPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE
  Features2=0xe3bdSSE3,DTES64,MON,DS_CPL,VMX,EST,TM2,SSSE3,CX16,xTPR,PDCM
  AMD Features=0x20100800SYSCALL,NX,LM
  AMD Features2=0x1LAHF
  TSC: P-state invariant
 real memory  = 4294967296 (4096 MB)
 avail memory = 3092344832 (2949 MB)
 ACPI APIC Table: LENOVO TP-79   
 FreeBSD/SMP: Multiprocessor System Detected: 2 CPUs
 FreeBSD/SMP: 1 package(s) x 2 core(s)
  cpu0 (BSP): APIC ID:  0
  cpu1 (AP): APIC ID:  1



 Do I need to configure something special to get the full 4GB of memory?

 I only found the PAE hint, but this is for x86 machines, right?

I think this BIOS specific, may be video rezerv


FreeBSD 9.0-CURRENT #0 r208284: Wed May 19 09:34:15 MSD 2010
and...@my_book:/home/andrey/obj/obj/home/andrey/src_head/sys/MY_BOOK amd64
WARNING: WITNESS option enabled, expect reduced performance.
Timecounter i8254 frequency 1193182 Hz quality 0
CPU: Intel(R) Core(TM)2 CPU T5600  @ 1.83GHz (1828.77-MHz K8-class CPU)
  Origin = GenuineIntel  Id = 0x6f2  Family = 6  Model = f  Stepping = 2
  
Features=0xbfebfbffFPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE
  Features2=0xe3bdSSE3,DTES64,MON,DS_CPL,VMX,EST,TM2,SSSE3,CX16,xTPR,PDCM
  AMD Features=0x20100800SYSCALL,NX,LM
  AMD Features2=0x1LAHF
  TSC: P-state invariant
real memory  = 4294967296 (4096 MB)
avail memory = 3339923456 (3185 MB)
___
freebsd-current@freebsd.org mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-current
To unsubscribe, send any mail to freebsd-current-unsubscr...@freebsd.org