On a recent -current
FreeBSD bishop.uberduper.com 5.1-CURRENT FreeBSD 5.1-CURRENT #0: Mon Oct 6
15:12:45 PDT 2003
I am unable to build XFree86-4-clients from ports. Here's the last little bits
from the build.
macro "in" not recognized -- ignoring
making all in programs/bdftopcf...
cc -O -pipe -mc
I guess I've just never paid that much attention to the clock. I think it's time for
me to get a real clock and setup an NTP server.
Thanks.
James.
On Tue, 11 Mar 2003 16:24:57 -0800 (PST)
"Andrew P. Lentvorski, Jr." <[EMAIL PROTECTED]> wrote:
> On Tue, 11 Mar
I'm getting what I think is substantial time drift on my -current boxes. My home
firewall in particular drifts about .42 seconds every hour. My desktop machine drifted
~350 seconds over the last 5 days.
Anyone else seeing this?
James.
To Unsubscribe: send mail to [EMAIL PROTECTED]
with "unsubsc
This card isn't detected by default, so I added the vendor and dev IDs to if_wi_pci.c.
Now it's detected, but doesn't attach. Here's what I think are the relevant bits from
dmesg.
pci2: physical bus=2
map[14]: type 4, range 32, base dcf0, size 4, enabled
map[18]: type 4, ran
I'm hoping some of you have played with dvarchive in the past or may have a
use for it in the future.
http://dvarchive.sourceforge.net
It seems to work okayish with linux-sun-jdk141
With jdk-1.4.1p3, it almost works. It has a server component that launches
and binds two sockets. Port 80 and one ot
eally hate doing hardware warranty returns.
James.
On Fri, 7 Mar 2003 14:20:24 -0800
James Satterfield <[EMAIL PROTECTED]> wrote:
> I've got a 160GB ide drive in my FBSD box. It's got an old ide controller that
> doesn't support big ide drives. Yet freebsd recognizes th
I've got a 160GB ide drive in my FBSD box. It's got an old ide controller that doesn't
support big ide drives. Yet freebsd recognizes the drives full capacity, allows me to
partition it, and newfs it. After writing about 47GB of data to the drive, I start
getting these.
ad5: WRITE command timeou
My first impression of SCHED_ULE is "slow." I only say this because the first thing I
fire up after starting X is Eterm with a transparant+shaded theme. Even with the old
scheduler this Eterm wasn't too snappy, but with SCHED_ULE it hangs X for about 1-2
seconds. I'm currently running a kernel c
Looks like this email didn't make it to the mailing list. I've not tried the solution
yet, but I figured everyone would like to see this.
James.
Begin forwarded message:
Date: Tue, 4 Mar 2003 18:14:32 +0900
From: Yoshinori KASAZAKI <[EMAIL PROTECTED]>
To: James Satterfield &
By the way... /usr/local/lib/vmware/lib/modules/vmmon_up.ko does exist.
James.
On Mon, 3 Mar 2003 14:57:12 -0800
James Satterfield <[EMAIL PROTECTED]> wrote:
> I'm trying to run vmware2 on a recent -current. I'm getting these when trying to
> load the vmmon_up module.
I'm trying to run vmware2 on a recent -current. I'm getting these when trying to load
the vmmon_up module.
kldload: can't load /usr/local/lib/vmware/lib/modules/vmmon_up.ko: No such file or
directory
Also making an appearance in dmesg is link_elf: symbol cdevsw_add undefined.
Current from today.
First off, I found SCHED_ULE to be very slow. More importantly, the two
times that I rebooted while running it, shutdown failed to sync the
disks. On the second reboot, I had just installed a new kernel. The
results of this were ugly. /boot/kernel and /boot/kernel.old
disappeared. I've since go
After a cvsup/rebuild of -current yesterday xmms plays audio at in
increased rate. I'm building right now in the hopes that it will go away.
James.
To Unsubscribe: send mail to [EMAIL PROTECTED]
with "unsubscribe freebsd-current" in the body of the message
Ditto.
Constantly get those errors.
smak# ls -lad dmesg.today
-rw--- 1 root wheel 32121 Feb 25 03:02 dmesg.today
All tx failed messages.
Same sysctl values as well.
James.
- Original Message -
From: "Juli Mallett" <[EMAIL PROTECTED]>
To: "Sam Leffler" <[EMAIL PROTECTED]>
Cc: <[EM
I'm getting a LOT of these.
ether_input: drop bdg packet, bif 0x5
wi0: tx failed, retry limit exceeded
Running a recent -current.
FreeBSD 5.0-CURRENT #0: Sat Feb 15 13:12:32 PST 2003
Just seems to be an annoyance. Everything seems to work just fine.
James.
To Unsubscribe: send mail to [EMAIL
Just a suggestion. Do not set media autoselect. Set it to DS/11Mbps
mediaopt adhoc or something. This still gives me a TON of tx timeouts,
but the card works. I've only had the problem you're seeing when I set
media autoselect.
James.
Maikel Verheijen wrote:
Since I deleted the original email
Dimitry Andric wrote:
-BEGIN PGP SIGNED MESSAGE-
Hash: SHA1
Hi,
Having tried 5.0-DP1 before on a certain box (see below for dmesg), I
tried booting a 5.0-RC1 CD on it. However, sysinstall always hangs at
"probing devices", although it reacts to ^C. Restarting it doesn't
really help, tho
I've tried the sun and blackdown jdk14 ports on -stable and had no
success in running even the demos that come with the jdk. Is this a just
me problem or do those jdks just not work?
James.
To Unsubscribe: send mail to [EMAIL PROTECTED]
with "unsubscribe freebsd-current" in the body of the mes
Marc Recht wrote:
> -march=pentiumpro is not the default, -mcpu=pentiumpro is. Anyway, I
Nope, -march=pentiumpro is added, if the CPUTYPE is i686 (the default).
At least if I had read examples/etc/make.conf and bsd.cpu.mk correctly.
> doubt this is the cause of the problem. It's more likely t
lcms still fails build tests when compiled with CPUTYPE?=i686 and no CFLAGS
set.
James.
- Original Message -
From: "Joe Marcus Clarke" <[EMAIL PROTECTED]>
To: "James Satterfield" <[EMAIL PROTECTED]>
Cc: <[EMAIL PROTECTED]>
Sent: Friday, December 06,
The lcms port fails it's build time tests on current with a P4. I believe
this builds on non-P4 systems running current.
building static lcms library
building shared library liblcms.so.1
ranlib liblcms.a
cd /usr/ports/graphics/lcms/work/lcms-1.09/src/../testbed && /usr/bin/env
CFLAGS="-O -pip
mozilla-devel port fails to build on current. I would imagine this is
already known, but I haven't seen any posts on the mailing list.
jsdtoa.c
cc -o
jsdtoa.o -c -DOSTYPE=\"FreeBSD5\" -DOSARCH=\"FreeBSD\" -DOJI -DEXPORT_JS_A
PI -DJS_USE_SAFE_ARENA -I../../dist/include/js -I../../dist/include -
I've found that wrapper needs to be updated with XFree86-4.
James.
- Original Message -
From: "John Angelmo" <[EMAIL PROTECTED]>
To: "current" <[EMAIL PROTECTED]>
Sent: Friday, April 19, 2002 1:13 PM
Subject: Xfree86-4 problem
> After yesterdays new build I found a problem
> Xfree86-4
n 0 flags 5 240-27f
wi0: at port 0x240-0x27f irq 11 slot 1 on pccard1
pcic: I/O win 0 flags 15 240-27f
wi0: Forcing IRQ to 11
wi0: 802.11 address: 00:02:2d:5b:42:a8
wi0: using Lucent chip or unknown chip
wi0: wi_generic_attach:wi_has_wep = 1
bpf: wi0 attached
pcic1: Event mask 0x9
- Or
Anyone working on one of these?
James.
To Unsubscribe: send mail to [EMAIL PROTECTED]
with "unsubscribe freebsd-current" in the body of the message
25 matches
Mail list logo
