heh. IBM? It's bad. All of the ones that I had (also running -current
from within 24 hours) that were spitting that were bad (All were POS IBMs
too!). Just my guess, however.
Regards,
Nick H.
Network Operations Center
[EMAIL PROTECTED]
Please rate my performance! http://www.supporttea
ICRC error cmd=write fsbn 41273248 of
41273248-41273374 retrying
Nov 22 09:58:42 juan last message repeated 2 times
Nov 22 09:58:42 juan kernel: ad2: UDMA ICRC error cmd=write fsbn 41273248 of
41273248-41273374 falling back to PIO mode
After replacing the drive, error gone.
Regards,
Nick H.
Ne
that did that to me, swap the drive, fixed.
Regards,
Nick H.
Network Operations Center
[EMAIL PROTECTED]
Please rate my performance! http://www.supportteam.net/rate.php3
Please submit all new support requests to
http://ticketmonster.hostingsupport.com
have that builds rather frequently. Im
thinking that it's fixed, but figured a heads up wouldn't hurt. I was
attempting to go into tcpdump (with nnxXv set as flags). If the new sources
dont fix it, I'll email an update, else just assume that it's all fixed.
Regards,
Nick H.
ff0b8 ---
*shrug* Figured someone here would know what's going on.
>From uname -a:
5.1-RELEASE #7: Wed Jun 18
Sources are from around Jun 9-18. Any suggestions are more than welcome.
Thanks!
Regards,
Nick H.
[EMAIL PROTECTED]
___
[EM
And it did. Thanks!
Regards,
Nick H.
[EMAIL PROTECTED]
- Original Message -
From: "Vitali Djatsuk" <[EMAIL PROTECTED]>
To: "Martin Blapp" <[EMAIL PROTECTED]>; "Nick H. - Network Operations"
<[EMAIL PROTECTED]>
Cc: <[EMAIL PROTE
ne more time on this box and see what
happens, but Im not expecting any changes.
Regards,
Nick H.
[EMAIL PROTECTED]
___
[EMAIL PROTECTED] mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-current
To unsubscribe, send any mail to "[EMAIL PROTECTED]"
but I will attempt to look
into it and find out why it wont load as a module. It's built in now and
everything is just fine, again, but it still worries me that it's doing
that.
Regards,
Nick H.
Network Operations Center
[EMAIL PROTECTED]
- Original Message -----
From: &qu
kernel and see what happens when it tries loading it up that
way.
Regards,
Nick H.
Network Operations Center
[EMAIL PROTECTED]
___
[EMAIL PROTECTED] mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-current
To unsubscribe, send any mail to
be the case) then which driver is it using? I tried a GENERIC kernel
with all the default drivers, but it diddnt work with them. I can
eventually get dmesg output again, but I'd need to bring the server down to
put the card back in. Any help is more than welcome. Thank you!
Regards,
N
.
Jul 28 03:55:35 pccardd[47]: ed1: Belkin (F5D5020-PCMCIA-Network-Card)
inserted.
...
Jul 28 03:56:45 pccardd[47]: pccardd started
The device is running just fine. Hopefully, this is of some help to you, as
if I understand you correctly, you're having issues with the IRQ setting.
Try th
ite:
http://catalog.belkin.com/IWCatProductPage.process?Merchant_Id=1&Product_Id=
104984#
and the page that shows FreeBSD support:
http://www.belkin.com/network/F5D5020.html
Thanks!
Regards,
Nick H.
[EMAIL PROTECTED]
___
[EMAIL PROTECTED] mai
;) I'll be more than happy to
provide with what I can. Thanks!
Regards,
Nick H.
[EMAIL PROTECTED]
___
[EMAIL PROTECTED] mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-current
To unsubscribe, send any mail to "[EMAIL PROTECTED]"
patches are welcome.
Thank you!
Regards,
Nick H.
Network Operations Center
[EMAIL PROTECTED]
___
[EMAIL PROTECTED] mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-current
To unsubscribe, send any mail to "[EMAIL PROTECTED]"
Just out of curosity... I had this same error a while back on one of my
boxes. I ended up booting to a recovery cd and running an fsck_ffs on it
and it fixed the problem. Mine would get to a login and *WHAM* it's dead.
Worth a shot to see if that fixes your problem or not
Regards,
N
"/vol4/src/usr.bin/kdump/mkioctls: Out of space"
mabye it's just me... but you may wish to check the space left avail on the
drive you're compiling on... it clearly states "Out of space". ?
Just a wild guess though...
Regards,
Nick H.
[EMAIL PROTECTED]
- Orig
ods. I'll compare the
IPFILTER from the -RELEASE cd to the IPFILTER currently on the CVS servers.
If I find anything, I'll be sure to send it here first ;)
Regards,
Nick H.
- Original Message -
From: "Kevin Oberman" <[EMAIL PROTECTED]>
To: "Tilman Linneweh&q
I am absolutely sure, as its on a completely fresh system.
ipf: IP Filter: v3.4.29 (336)
Kernel: IP Filter: v3.4.29
- Original Message -
From: "Maxime Henrion" <[EMAIL PROTECTED]>
To: "Nick H. -- Technical Support Engineer" <[EMAIL PROTECTED]>
Cc: &l
id it. The only feasible way to get the machine online with
that source is to rip out IPFILTER. Anyone having similiar issues?
Any comments/suggestions would be more than welcome, as having boxes on the
network with no firewall is just asking for trouble ;)
Regards,
Nick H.
[EMAIL PROTECTED]
options SCHED_4BSD #4BSD scheduler
It's in there.
Regards,
Nick H.
Technical Support Engineer
[EMAIL PROTECTED]
Please rate my performance! http://www.supportteam.net/rate.php3
Please submit all new support requests to
http://ticketmonster.hostingsuppor
e':
/usr/src/sys/i386/i386/machdep.c:1028: undefined reference to
`sched_runnable'
*** Error code 1
Stop in /usr/obj/usr/src/sys/Harms.
*** Error code 1
Stop in /usr/src.
*** Error code 1
Stop in /usr/src.
That's pretty much what happens. Any ideas/suggestions on fixing? Thi
Same problem here:
cc1: warnings being treated as errors
/usr/src/crypto/telnet/libtelnet/enc_des.c: In function `fb64_start':
/usr/src/crypto/telnet/libtelnet/enc_des.c:214: warning: implicit
declaration of function `des_new_random_key'
*** Error code 1
Stop in /usr/src/secure/lib/libtelnet.
***
Did same as you suggested and it still failed.
Regards,
Nick H.
[EMAIL PROTECTED]
- Original Message -
From: "Jeff Utter" <[EMAIL PROTECTED]>
To: "Nick H. -- Technical Support Engineer" <[EMAIL PROTECTED]>;
<[EMAIL PROTECTED]>
Sent: Tuesday, Janu
Let me know how it goes... I may wanna try that
Regards,
Nick H.
Technical Support Engineer
[EMAIL PROTECTED]
Please rate my performance! http://www.supportteam.net/rate.php3
Please submit all new support requests to
http://ticketmonster.hostingsupport.com
Anyone know of a way to fix this? A lot of programs will not install (IE:
net-snmp) with the current status. I have yet to find where the location of
the file should be... =\ I have tried a couple of spots for the file to go,
yet it still fails in the same spot. =(
Regards,
Nick H.
[EMAIL
Got this today... src is fresh from cvsup2
mkdep -f
pend -a-I/usr/src/lib/libpam/modules/pam_ssh/../../../../crypto/openssh
-I/usr/src/lib/libpam/modules/pam_ssh/../../../../contrib/openpam/include -I
/usr/src/lib/libpam/modules/pam_ssh/../../libpam
/usr/src/lib/libpam/modules/pam_ssh/pam_
Sorry about emailing both lists, as Im not sure which one this falls under.
It's a current machine (5.0-CURRENT) and it's a problem with a port
(net-snmp). Below is what happens:
`VM_METER' undeclared (first use in this function)
Anyone know how to fix this or a way around it?
Got this today after cvsup'ing earlier this morning:
if_wi.o: In function `wi_attach':
if_wi.o(.text+0x71d): undefined reference to `ieee80211_rate2media'
if_wi.o(.text+0x85d): undefined reference to `ieee80211_ifattach'
if_wi.o: In function `wi_detach':
if_wi.o(.text+0x8f4): undefined reference
also say, that after it's done building, it runs
a lot quicker and smoother than on a 4.7-RELEASE-p3 machine I have ;)
cd /usr/ports/x11/kde3/
make install
That's all the commands needed for a generic install of kde3 and all it's
componets.
Regards,
Nick H.
[EMAIL PROTECTED]
--
is running on an Asus motherboard (will get model
shortly) and I have yet to run into any problems.
Regards,
Nick H.
[EMAIL PROTECTED]
- Original Message -
From: "Terry Lambert" <[EMAIL PROTECTED]>
To: "Wilko Bulte" <[EMAIL PROTECTED]>
Cc: "Nate Law
Hey guys/gals,
Ive run into a little snag here that Im needing some help with. Ive enabled
SMP and APIC_IO in the kernel of a 4.7-RELEASE-p3 machine (cvsup'd yesterday
and installed all) yet everything is still showing just one cpu. Im
positive it's a dual machine cause when I built it I tossed
Hello,
You may wish to run xfree86cfg again and step through the setup. When it
asks you for a video card, select any ATI card (we'll change this later) and
continue on through the setup of X. Once you have the config saved, go into
the config and change the driver from "ati" to "radeon" and tha
Anyone have any good how-to's on how to setup a FreeBSD box to do multicast
routing? Im wanting to setup a FreeBSD gateway that will have a Cable modem
and a DSL modem connected to it. Any traffic on certain ports I want to go
through (out) one interface (dc0) and the rest to go through the other
When I put KDE 3.0.5 on my 5.0-RC1 box it took just about 20 hours (600mhz
with 384MB PC100... backup box ;)) but it runs faster (as compared to KDE on
a 4.7-RELEASE). Im willing to give up a bit more comiple time to get better
performance out of my apps. =)
-Nick "Harm" Hale
- Original Mes
34 matches
Mail list logo
