Re: ThinkPad X22 PC-Card slot problem
Sorry for late reply. I didn't have time to test it. From: M. Warner Losh [EMAIL PROTECTED] Date: Thu, 07 Feb 2002 10:04:35 -0700 (MST) Yes. This is the ISA problem. The checks are there to make sure we don't assign addresses that aren't decoded by the bridge. However, the bridge does decode ISA addresses. I need to check into which ISA stuff a little better before making a fix. Revision ChangesPath 1.7 +30 -14src/sys/dev/pci/pci_pci.c This fixed half of the problem, thank you. However, X22's PCICs (yes two PCICs) request to use 0x5000-0x5fff and 0x5000-0x5fff where the bridge does not know. So I still need PCI_ALLOW_UNSUPPORTED_IO_RANGE. pcib1: PCI-PCI bridge at device 1.0 on pci0 pcib1: secondary bus 1 pcib1: subordinate bus 1 pcib1: I/O decode0x3000-0x3fff pcib1: memory decode 0xc010-0xc01f pcib1: prefetched decode 0xe000-0xe7ff pci1: physical bus=1 map[10]: type 3, range 32, base e000, size 27, enabled map[14]: type 4, range 32, base 3000, size 8, enabled map[18]: type 1, range 32, base c010, size 16, enabled found- vendor=0x1002, dev=0x4c59, revid=0x00 bus=1, slot=0, func=0 class=03-00-00, hdrtype=0x00, mfdev=0 intpin=a, irq=11 powerspec 2 supports D0 D1 D2 D3 current D0 : pcic0: Ricoh RL5C476 PCI-CardBus Bridge mem 0x5000-0x5fff irq 11 at device 3.0 on pci2 pcib2: device pcic0 requested unsupported memory range 0x5000-0x5fff ( decoding 0xc020-0xcfff, 0xe800-0xf00f) pcib2: device pcic0 requested decoded memory range 0x5000-0x5fff // Noriaki Mitsunaga // To Unsubscribe: send mail to [EMAIL PROTECTED] with unsubscribe freebsd-current in the body of the message
ThinkPad X22 PC-Card slot problem
Next_Part(Wed_Feb__6_23:02:07_2002_731)-- Content-Type: Text/Plain; charset=us-ascii Content-Transfer-Encoding: 7bit I recently installed -current to ThinkPad X22. Though it seems that X22's PC-Card slots work fine with -stable, in -current when probing PCICs I got following message, pcic0: Ricoh RL5C476 PCI-CardBus Bridge mem 0x5000-0x5fff irq 11 at device 3.0 on pci2 pcib2: device pcic0 requested unsupported memory range 0x5000-0x5fff (decoding 0xc020-0xcfff, 0xe800-0xf00f) pcib2: device pcic0 requested decoded memory range 0x5000-0x5fff after this, pcic returns error but some how it is attached and when I install a PC-Card, the machine freezes. The address range above (0x5000-0x5fff) is same one that I see with -stable. When PCI_ALLOW_UNSUPPORTED_IO_RANGE is defined in sys/dev/pci/pci_pci.c, pcic does not return error, the machine does not freeze, but when a PC-Card is inserted I get the message, pccard: card inserted, slot 0 pcic0: reset 1 int is 10 stat is 5f pcic0: reset 2 int is 70 stat is 5f pcic0: reset 3 int is 70 stat is 7f pcic0: Event mask 0x9 pcib2: device pccard0 requested decoded I/O range 0x4000-0x25f pcib2: device pccard0 requested decoded I/O range 0x4000-0x25f pcib2: device pccard0 requested decoded I/O range 0x4000-0x25f pcib2: device pccard0 requested decoded I/O range 0x4000-0x25f pcib2: device pccard0 requested decoded I/O range 0x4000-0x25f : and the card does not attached. The complete dmesg with boot -v is attached. Any ideas ? // Noriaki Mitsunaga // Next_Part(Wed_Feb__6_23:02:07_2002_731)-- Content-Type: Application/Octet-Stream Content-Transfer-Encoding: base64 Content-Disposition: attachment; filename=dmesg.X22-current.gz H4sICCZVXzwCA2RtZXNnLlgyMi1jdXJyZW50AOw8/W/buJI/13/FoHfvkOzZDkl92rcpnuOk ra9Nk4vTfQssHgJZomK92JJWktu4f/3NkJKsOLbjZFssHrBFqlDiDOeDM8MZisowSZdZdDst 4MA/BN7riY5gTMD1VMLbTMqT8SlcZsm/pF90W8M1YKfXxqvL1NVQV1tdXXVVvT2urkJdFUzP bL2i4a/krYyLHJIQCrz9HEdfZJZHxZKeDL1ZFCZZHHldGMxmoMjmkMlcZl9k0G1VzFld1hl+ vro6+3QN/8F5H64XyLmcAFiAt4bd5z343/E1kFgtwH9ZkhR/L1LGuzLrevO8K+PbbpJ7d15n 0fX87r/S/tEiz47yzD/Kl/lRZLj2kZ/M02gmj96dfTq7Gg1bl5mcJV4gA5CzEO5kFssZvD6a 4NhH+q789Rq8Ati9zyxLMsa6a5jzJFjM5Bqm56dR9y55gDoxUf+olEnmFVF8C/4s8e8O8kPo drtwPR7qB31weo5hMm704P23NkSusMyqi/OewR0HO1rDjx9uPo/PbkbUfzMcfBydXA2uRxef IE4KyFPpR2GELHZgkRO1QIbeYlZAmMnfFzL2l63raC79ZBEXMoPXisxrWHVrWq5o0kIm96CU zALwKzmTGOaymCbBQ3I40gNiSma0MVORu/zch0u0rGgxh9FodNRow68yiY+GciYzHPoA8bqG 1Tl//w1s1+74My/PAfEP0U4u0OKiGI7h9TsZL6JYjpA2ziaMAnzI7u0JBxgXMk2J62PgiPNW esUCTfSY3RuuEfbC8Oe3l5/bv5yftU/P2pfjszZy3j4fX7UvB2ft8+FZe/ir2x6fXbbPr6/w 4Tt6OGgPzy9+QYhrwjDs9vn5r+23vyLSeHz2ppVJb4ZKmSfZEpCsyQSzDcNmcGD0hG2yDzBZ FjI/bF1Ol3nkr4D96SImg+m32D0aIuP4H7WubnoyDMM22KbDbVcPAAfcciH1bmksArJcq8Lg Tmg7CsPo2cIUPdOskHq2g6ZXonlfvKimfwyGawnhuox4dWz0x5rXSZTkhujDW5zhAE5GF2ND wBg9PfIlnEYZRh8aYirRb7LKK1joGC6rcc/iQlFh92HgSKRBENQ6BAw1X6gH4KOM1VylfkR4 aCjDkaIHUqGroRHLYf+NYrqylcapBtSsXcaXGjzwCq/JiGQr0IqTkNTc97jBKw54twn2BWlC OPNuaSBzYrYuMA5mevw8uo21MUFIlPuteDGb9eFn+oXuSJppwze04/IGLcOLg2SOICQKRmrI k0VGHTgB+LSchv+C0dHFm1blFBjbgYwP8kWaJlmBevAmMxmQhm6SVMYH/LD/CqOUBA5eEGSg oA7QIvzQPYQoRxW4ypq42UDySiyu3cFl+h8hVu1DBe6Ht/5UYnh6peXAWfpNOeIxswnqn/Db NMiOqYG0SEESDqLg2LAcy2Wufdj6rOLGf16OrqAg3nGNMdV0Rqi8eooCOWGtOL1npAqvmEKa Jb7M8yR7AxRmEhp6knhZUEKNcEHhNkQUckLPly2KyoQ9OjmnZeT6ssNP8fcjdOocDC9HHYaO 0YeffvoJzrIsyfpwrmIZyHvpL1RwC9E/ZNCGwdnNp4vrm7NfR+PrPx2/lDNNvqIxThZFgYCo +imaFwKDh0qFMLrHZqjjHanyNvPmc5oHmvRZ92G8Jm4eBGycvJ5lWhSuvwe3NwVSy2huhNmZ RAWoe5p7o6spYYh/oy0X3Zoxt6N+TWjqlLh6GD9d0CC4ArxZ6ym+UQfN8Rwj6rcklusQsyhQ uAk536xi/mMUwPhrVPjTdXitWEIZz6RM4UTdr0NRnCKY90ledChWTbIouJW1LOiDHbqGKzxE odmrov9kgZ7UejX30t84+2cfimUqAfMwjBa32MC8bOLlEoLSKdsYeb5JEJjBVZFAxZ/Om1cY roIkU85MaR66K61z6IY4GLpugHeYYb1SBHGYWVLQ73AR+8RA5dMdxjpEBp2aWCEkvJuHargn adnbafFNtMx1WnxFS+lE1DoxH+lErZJurROw9tSJMF3R4JM/5FP0HjHqd5ixVSmIjjEIs4xj D/O57PdjzvdlXbyEdXMP1vl+rLOa9clzWTdfwrqzB+viuaz7NetPkDfdFXlzjbzBnmudT8nq b5fV2OgKfJeFPQwPmyeF8bCeFGM1KRrXfALXCM0KV6zjuk/RdbbT9Z+i62yl+7QR2jVdc38j 9PaYmJX/cJoYwtlthKXrC8val3f3JQ5k7MG70XQg6/m+/5SZcX8VcdGj1EIXRPkzjI27fj2C vT7CUyqw9lCBVavA3OVXL1aBMP+oCsRqKQfnuSqw91CBXavAee4KoBOUn1U2s8jrjEfnOqoy 47r7QcKDyVxZIGARRTg0TAUNkGO2GQceFjg4JuWUZZGnOxeTJAsiLKhk2d3oxHIIR/apwin/ YabBKEu5N7DGXQGWBVQDlioLrsJMRzXD8AFCmslQYuqHmXKJxO5lmWchgnTCGoGvZWz86YxN rmVszjNDssEeGNmWkMwf4VYil7jc3hFeEFJUhmX6Vq9hWEwbFt+aKRq7M8UNSZGqWGhHCQRU 9WwOpwxOOZwKODUA/EWWUdV9ykqtPzBDNXNVB7pLOvOWbfjl3aBpfgzN7yDGsjuj/UrsKDya 4sPWYqoNW20UgStcxoeDo+HgHA5Gw/fGIXwen4Cv64MZYuJtZ7CqSlxlFNzlIQkEnDdoil7D 5hf55AVkEFsxWKITEM1FToUVbUsspgt6rkf9/B61QvukgE/boDfGekdMzR+BsyO6tPWOAK+Q BWiVY8EzxZsMHeaLrshz2utU84NmQnzwZ0pw0lCU0IoyNiuKNxX1AjKloniJvlFR/I8oij9L UQIlUFQObmUss8hf57uhGFMrxtqsGLFSjB734JP8qiU4VUCjoEyj9b4Kyr8H8VJdogTfqC6i 1Rj5RVoTe2uNvFjsXEEMtraEiM1LiGh0PlpC3FXnpiXE1EHerVYEsX0JEfUSEq5WBI2wcQlx 6yUkZKxGEGtLiFhfQh6HcuvhEsLFrlDOKaPUoZyZzULcc3UoF1WOsKn6cNZDudhZ3z4vlO8h KP+BgvLnCjr5YYKSMfGGoHxfQS1LPF6c1wV9UDuzDn9yx8LfR9CdIj7Oe8LnGK2waxEN19lQ
Re: ThinkPad X22 PC-Card slot problem
In message: [EMAIL PROTECTED] [EMAIL PROTECTED] writes: : From: M. Warner Losh [EMAIL PROTECTED] : Date: Wed, 06 Feb 2002 19:33:32 -0700 (MST) : Hmmm. This looks ugly. :-( I can't boot with acpi enabled on my Dell : Inspiron 8000. I can boot with apm enabled. There are issues with : routing interrupts accross PCI PCI bridges at the moment when the : slots on the other side of the bridge are in the PIR table. : : It turned out that this was not a intterupt routing problem. By : disabling the memory/port range checks in sys/dev/pci/pci_pci.c solved : the problem (below is the patch). pci_pci.c claims that both the : memory adderss for pcic and the PC-Cards are not supported but I could : use the addresses. Yes. This is the ISA problem. The checks are there to make sure we don't assign addresses that aren't decoded by the bridge. However, the bridge does decode ISA addresses. I need to check into which ISA stuff a little better before making a fix. Warner To Unsubscribe: send mail to [EMAIL PROTECTED] with unsubscribe freebsd-current in the body of the message To Unsubscribe: send mail to [EMAIL PROTECTED] with unsubscribe freebsd-current in the body of the message
Re: ThinkPad X22 PC-Card slot problem
In message: [EMAIL PROTECTED] [EMAIL PROTECTED] writes: : From: Takanori Watanabe [EMAIL PROTECTED] : Date: Wed, 06 Feb 2002 23:16:21 +0900 : I recently installed -current to ThinkPad X22. Though it seems that : X22's PC-Card slots work fine with -stable, in -current when probing : PCICs I got following message, : : : How about disabling ACPI? If this works, it is because ACPI PCI interrupt : routing problem. : : No, disabling ACPI does not change the situation. Hmmm. This looks ugly. :-( I can't boot with acpi enabled on my Dell Inspiron 8000. I can boot with apm enabled. There are issues with routing interrupts accross PCI PCI bridges at the moment when the slots on the other side of the bridge are in the PIR table. Warner To Unsubscribe: send mail to [EMAIL PROTECTED] with unsubscribe freebsd-current in the body of the message To Unsubscribe: send mail to [EMAIL PROTECTED] with unsubscribe freebsd-current in the body of the message
Re: ThinkPad X22 PC-Card slot problem
From: M. Warner Losh [EMAIL PROTECTED]
Date: Wed, 06 Feb 2002 19:33:32 -0700 (MST)
Hmmm. This looks ugly. :-( I can't boot with acpi enabled on my Dell
Inspiron 8000. I can boot with apm enabled. There are issues with
routing interrupts accross PCI PCI bridges at the moment when the
slots on the other side of the bridge are in the PIR table.
It turned out that this was not a intterupt routing problem. By
disabling the memory/port range checks in sys/dev/pci/pci_pci.c solved
the problem (below is the patch). pci_pci.c claims that both the
memory adderss for pcic and the PC-Cards are not supported but I could
use the addresses.
// Noriaki Mitsunga //
Index: pci_pci.c
===
RCS file: /home/ncvs/src/sys/dev/pci/pci_pci.c,v
retrieving revision 1.6
diff -u -r1.6 pci_pci.c
--- pci_pci.c 15 Jan 2002 06:46:59 - 1.6
+++ pci_pci.c 7 Feb 2002 09:55:44 -
@@ -282,15 +282,18 @@
*/
switch (type) {
case SYS_RES_IOPORT:
+#if 0
if (start sc-iobase)
start = sc-iobase;
if (end sc-iolimit start end)
end = sc-iolimit;
+#endif
if ((start sc-iobase) || (end sc-iolimit)) {
device_printf(dev, device %s%d requested unsupported I/O range
0x%lx-0x%lx
(decoding 0x%x-0x%x)\n,
device_get_name(child), device_get_unit(child), start,
end,
sc-iobase, sc-iolimit);
+#define PCI_ALLOW_UNSUPPORTED_IO_RANGE
#ifndef PCI_ALLOW_UNSUPPORTED_IO_RANGE
return(NULL);
#endif
To Unsubscribe: send mail to [EMAIL PROTECTED]
with unsubscribe freebsd-current in the body of the message
Re: ThinkPad X22 PC-Card slot problem
In message: [EMAIL PROTECTED] [EMAIL PROTECTED] writes: : From: M. Warner Losh [EMAIL PROTECTED] : Date: Wed, 06 Feb 2002 19:33:32 -0700 (MST) : Hmmm. This looks ugly. :-( I can't boot with acpi enabled on my Dell : Inspiron 8000. I can boot with apm enabled. There are issues with : routing interrupts accross PCI PCI bridges at the moment when the : slots on the other side of the bridge are in the PIR table. : : It turned out that this was not a intterupt routing problem. By : disabling the memory/port range checks in sys/dev/pci/pci_pci.c solved : the problem (below is the patch). pci_pci.c claims that both the : memory adderss for pcic and the PC-Cards are not supported but I could : use the addresses. Yes. This is the ISA problem. The checks are there to make sure we don't assign addresses that aren't decoded by the bridge. However, the bridge does decode ISA addresses. I need to check into which ISA stuff a little better before making a fix. Warner To Unsubscribe: send mail to [EMAIL PROTECTED] with unsubscribe freebsd-current in the body of the message
ThinkPad X22 PC-Card slot problem
I recently installed -current to ThinkPad X22. Though it seems that X22's PC-Card slots work fine with -stable, in -current when probing PCICs I got following message, pcic0: Ricoh RL5C476 PCI-CardBus Bridge mem 0x5000-0x5fff irq 11 at device 3.0 on pci2 pcib2: device pcic0 requested unsupported memory range 0x5000-0x5fff (decoding 0xc020-0xcfff, 0xe800-0xf00f) pcib2: device pcic0 requested decoded memory range 0x5000-0x5fff after this, pcic returns error but some how it is attached and when I install a PC-Card, the machine freezes. The address range above (0x5000-0x5fff) is same one that I see with -stable. When PCI_ALLOW_UNSUPPORTED_IO_RANGE is defined in sys/dev/pci/pci_pci.c, pcic does not return error, the machine does not freeze, but when a PC-Card is inserted I get the message, pccard: card inserted, slot 0 pcic0: reset 1 int is 10 stat is 5f pcic0: reset 2 int is 70 stat is 5f pcic0: reset 3 int is 70 stat is 7f pcic0: Event mask 0x9 pcib2: device pccard0 requested decoded I/O range 0x4000-0x25f pcib2: device pccard0 requested decoded I/O range 0x4000-0x25f pcib2: device pccard0 requested decoded I/O range 0x4000-0x25f pcib2: device pccard0 requested decoded I/O range 0x4000-0x25f pcib2: device pccard0 requested decoded I/O range 0x4000-0x25f : and the card does not attached. The complete dmesg with boot -v is attached. Any ideas ? // Noriaki Mitsunaga // dmesg.X22-current.gz Description: Binary data
Re: ThinkPad X22 PC-Card slot problem
In message [EMAIL PROTECTED], [EMAIL PROTECTED] wrote I recently installed -current to ThinkPad X22. Though it seems that X22's PC-Card slots work fine with -stable, in -current when probing PCICs I got following message, pcic0: Ricoh RL5C476 PCI-CardBus Bridge mem 0x5000-0x5fff irq 11 at device 3.0 on pci2 pcib2: device pcic0 requested unsupported memory range 0x5000-0x5fff ( decoding 0xc020-0xcfff, 0xe800-0xf00f) pcib2: device pcic0 requested decoded memory range 0x5000-0x5fff after this, pcic returns error but some how it is attached and when I install a PC-Card, the machine freezes. The address range above (0x5000-0x5fff) is same one that I see with -stable. When PCI_ALLOW_UNSUPPORTED_IO_RANGE is defined in sys/dev/pci/pci_pci.c, pcic does not return error, the machine does not freeze, but when a PC-Card is inserted I get the message, pccard: card inserted, slot 0 pcic0: reset 1 int is 10 stat is 5f pcic0: reset 2 int is 70 stat is 5f pcic0: reset 3 int is 70 stat is 7f pcic0: Event mask 0x9 pcib2: device pccard0 requested decoded I/O range 0x4000-0x25f pcib2: device pccard0 requested decoded I/O range 0x4000-0x25f pcib2: device pccard0 requested decoded I/O range 0x4000-0x25f pcib2: device pccard0 requested decoded I/O range 0x4000-0x25f pcib2: device pccard0 requested decoded I/O range 0x4000-0x25f : and the card does not attached. The complete dmesg with boot -v is attached. Any ideas ? How about disabling ACPI? If this works, it is because ACPI PCI interrupt routing problem. pcib2: PCI-PCI bridge at device 30.0 on pci0 pci2: PCI bus on pcib2 pcic0: Ricoh RL5C476 PCI-CardBus Bridge mem 0x5000-0x5fff irq 11 at device 3.0 on pci2 Takanori Watanabe a href=http://www.planet.sci.kobe-u.ac.jp/~takawata/key.html; Public Key/a Key fingerprint = 2C 51 E2 78 2C E1 C5 2D 0F F1 20 A3 11 3A 62 2A To Unsubscribe: send mail to [EMAIL PROTECTED] with unsubscribe freebsd-current in the body of the message
Re: ThinkPad X22 PC-Card slot problem
From: Takanori Watanabe [EMAIL PROTECTED] Date: Wed, 06 Feb 2002 23:16:21 +0900 I recently installed -current to ThinkPad X22. Though it seems that X22's PC-Card slots work fine with -stable, in -current when probing PCICs I got following message, : How about disabling ACPI? If this works, it is because ACPI PCI interrupt routing problem. No, disabling ACPI does not change the situation. // Noriaki Mitsunaga // To Unsubscribe: send mail to [EMAIL PROTECTED] with unsubscribe freebsd-current in the body of the message
Re: ThinkPad X22 PC-Card slot problem
In message: [EMAIL PROTECTED] [EMAIL PROTECTED] writes: : From: Takanori Watanabe [EMAIL PROTECTED] : Date: Wed, 06 Feb 2002 23:16:21 +0900 : I recently installed -current to ThinkPad X22. Though it seems that : X22's PC-Card slots work fine with -stable, in -current when probing : PCICs I got following message, : : : How about disabling ACPI? If this works, it is because ACPI PCI interrupt : routing problem. : : No, disabling ACPI does not change the situation. Hmmm. This looks ugly. :-( I can't boot with acpi enabled on my Dell Inspiron 8000. I can boot with apm enabled. There are issues with routing interrupts accross PCI PCI bridges at the moment when the slots on the other side of the bridge are in the PIR table. Warner To Unsubscribe: send mail to [EMAIL PROTECTED] with unsubscribe freebsd-current in the body of the message
